Threaded flanges are not suitable for pipelines with thin wall thicknesses because it is difficult to cut threads on such pipelines. Description Threaded flanges are designed to use threads to connect flanges to piping. Threaded flanges are used to connect pipes together in a safe, leak-free manner. They are often used in industrial pipelines where the flow of fluids or gases needs to be carefully controlled. Threaded flanges are designed to screw onto the end of a pipe, creating a tight seal that prevents leaks and ensures that the pipe operates at maximum efficiency. In addition to being used to connect pipes together, threaded flanges can also be used to connect other piping components such as valves, pumps and fittings. This makes them a versatile component that can be used in a variety of different piping configurations. Threaded flanges are typically made from materials such as carbon steel, stainless steel or alloy steel. The material used will depend on the specific requirements of the pipeline and its operating environment. The main advantage of threaded flanges is that they do not require welding to connect to the pipe. The ability to form joints without welding is a considerable advantage and is critical in certain locations and industries such as gas stations, hexane plants, flammable liquid stores, and other explosive areas (Ex zones). If welding is not required, the potential source of ignition has been removed. Another advantage is that threaded flange fittings are faster and easier to assemble and disassemble than welded flange fittings. Threaded flanges are not suitable for pipes with thin wall thicknesses, as it is more difficult to cut threads on such pipes. In some cases, sealing welds can be used to improve the integrity of the flange and reduce the potential for leakage. Adding a seal weld increases the integrity of the flange, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
Customized connector pleated sintered filter cartridges are filter elements that are made of stainless steel wire mesh or sintered metal fiber felt. The filter cartridges are formed by sintering at the contact points of the wire mesh, creating a porous filter cylinder with high surface filtration performance. The cartridges feature a pleated design, providing a larger filtration area and strong dirt-holding capacity. They can be provided with double-open ends or single-open ends, often accompanied by threaded end gaskets (such as O-rings) to reduce friction. Specifications Material: Stainless steel 304/316L or other special alloys Filtration precision: 1-300 microns Porosity: Up to 90% Length: 99-1490 mm Diameter: 35-80 mm Operating temperature: -200�°C to 600�°C Cleaning methods: Backwashing, ultrasonic cleaning Connector: As per drawing requirements Features High dirt-holding capacity: The pleated design provides a larger filtration area, allowing the filter cartridge to efficiently capture and retain dirt, extending its service life. Corrosion resistance: The filter cartridge is made of stainless steel throughout, exhibiting excellent corrosion resistance and suitable for filtering various corrosive media. High strength and stability: The filter cartridge possesses high strength and stability, capable of withstanding high pressure and harsh operating conditions, ensuring reliable operation of the filter. Multiple filtration grades: Different filtration grades of filter cartridges can be provided to meet various particle size filtration requirements. Easy to clean: Pleated sintered filter cartridges can be cleaned through various methods, including backwashing, reverse flow, and ultrasonic cleaning, while still maintaining high filtration efficiency after cleaning. Applications Chemical industry Oil and gas industry Food and beverage industry Pharmaceutical industry Electronics industry Automotive industry Other industrial applications
Threaded flanges are designed to use threads to connect flanges to piping. Threaded flanges are used to connect pipes together in a safe, leak-free manner. They are often used in industrial pipelines where the flow of fluids or gases needs to be carefully controlled. Threaded flanges are designed to screw onto the end of a pipe, creating a tight seal that prevents leaks and ensures that the pipe operates at maximum efficiency. In addition to being used to connect pipes together, threaded flanges can also be used to connect other piping components such as valves, pumps and fittings. This makes them a versatile component that can be used in a variety of different piping configurations. Threaded flanges are typically made from materials such as carbon steel, stainless steel or alloy steel. The material used will depend on the specific requirements of the pipeline and its operating environment. The main advantage of threaded flanges is that they do not require welding to connect to the pipe. The ability to form joints without welding is a considerable advantage and is critical in certain locations and industries such as gas stations, hexane plants, flammable liquid stores, and other explosive areas (Ex zones). If welding is not required, the potential source of ignition has been removed. Another advantage is that threaded flange fittings are faster and easier to assemble and disassemble than welded flange fittings. Threaded flanges are not suitable for pipes with thin wall thicknesses, as it is more difficult to cut threads on such pipes. In some cases, sealing welds can be used to improve the integrity of the flange and reduce the potential for leakage. Adding a seal weld increases the integrity of the flange, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
Frame material : Galvanized frame/ Aluminum alloy frame/ Stainless steel frame Frame thickness:10/21/46/96 etc Filter material:aluminum wave nets/stainless steel nets Maximum temperature:above 250â?? Maximum humidity:100% Optional aluminum depth 7~96mm Efficiency:G1 G2 (EN779)45%~95%@0.5�¼ Customized size: Available Packing : Inner packing is carton ,outer packing is pallet Port: Qingdao SPECIFICATION The metal mesh pre air filter adopt multi-layer expanded aluminum foil mesh or stainless steel mesh and the metal mesh is pressed into undulations and intersect each other at appropriate angles Metal meshes are arranged from thick to fine according to density and pore size, thus increasing the dust collection capacity and filtration efficiency. The initial resistance is lower than 20Pa. APPLICATION 1.The metal mesh pre air filter can used for clean room conditioning system ,pre-filtration through fresh air venting units ,and exterior air conditioning connection . 2.Primary filtration for central air conditioning system . 3.Pre-filtration at the intake of Air purification equipment . 4.Primary filtration in a filtration system . 5.Ventilation system for outdoor and other harsh environments. 6.Pre-filtration in Ventilation system for outdoor fire-proof and high temp resistance working condition .
The function of an elbow is to change the direction or flow in a piping system. By default, there are 5 opportunities, 45, 90 and 180 elbows, all three in the long radius version, and 90 and 180 elbows in the short radius version. Standard: ASTM B16.9/16.5/16.47A/16.47B B2220 2001, SH3408, SH3409,GBT12459, GB/T13401 Production process: Cold extrusion & Hot extrusion forming. Type: 45, 90, 180 (R=1D, 1.5D, 3D, 5D,6D,8D...), Dimension: 1/8 to 48 Material: Carbon steel, Alloy Steel, Stainless steel. Long Radius and Short Radius The elbows are divided into two groups which define the distance at which they change direction; the centerline at one end to the other side. This is called the center to face distance and corresponds to the radius of the elbow bend. The center-to-face distance for long radius elbows, abbreviated LR is always 1.1/2 x Nominal Pipe Size (NPS) (1.1/2D), while the center-to-face distance for short radius elbows, abbreviated SR even is the nominal pipe size. 45 Elbow A 45 elbow has the same function as a 90 elbow, but the dimensional measurements are different from those of a 90 elbow. The radius of a 45 elbow is the same as that of a 90 LR (1.1/2D). However, the center-to-face dimension is not equal to the radius in the 90 LR elbow. This is measured from the intersection of each face to the center line perpendicular to each other at a distance of B on the image. this is due to the smaller curvature. Short radius 45 elbows are not available.
Specifications 1. Overhead insulated electrical cable astm/bs/din iec standard 2. Best price quality and package fast delivery Al/xlpe overhead abc cable (aerial boundled cable) single/duplex/triplex/quadruplex/five stranding. 1. Application of service drop cable: Service drop cable(abc cable) are mainly used for electric power transmission, rebuilding of urban and forest regions. They can improves safety and reliance of electrified wire netting. 2. Types of service drop cable: Service drop cable(abc cable) covers mainly three types: Duplex service drop triplex service drop quadruplex service drop 2.1 duplex service drop Applications To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75 maximum. 2.2 triplex service drop Applications To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for pe insulation or 90 maximum for xlpe insulation. 2.3 quadruplex service drop Applications To supply 3 phase power, from a pole-mounted transformer to the use`s servic head where connection to the service entance cable is made. To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for pe insulated conductors or 90 for xlpe insulated conductors. Conductor standards: 1. B-230 aluminum wire, 1350-h19 for electrical purposes. 2. B-231 aluminum conductors, concentric-lay-stranded. 3. B-232 aluminum conductors, concentric-lay-stranded, coated steel reinforced (acsr). 4. B-399 concentric-lay_stranded 6201-t81 aluminum alloy conductors. 5. B498 zinc-coated steel core wire for aluminum conductors, steel reinforced (acsr). 6. Duplex service drop cable meets or exceeds all applicable requirements of ansi/icea s-76-474
Belt Conveyor Introduction: Using a metal mesh as a delivery carrier. Driving methods are: gear motor drive. Speed control methods are: frequency control, Promise speed. Frame materials are: stainless steel, carbon steel Use: for all sectors of the drying, dehumidification, cleaning, quick-frozen and other processes working principle Conveyor chain for the sleeve roller chain, continuous bucket structure, for the level of high temperature clinker, climbing. main feature â?? transport capacity: the maximum conveying capacity of up to 526m3 / h, the maximum inclination of up to 60 degrees. High temperature, can transport the temperature of less than 600 degrees of material. â?? Conveyor chain is composed of traction chain, bearing chain and forward lap (or reverse lap) of the hopper, three parts can be free handling. â?? bearing the wheel with a rolling bearing to roll friction instead of the previous sliding friction, running resistance reduced by 55% -65%, greatly reducing the conveyor power consumption, low energy consumption. â?? traction chain and load chain separately, so that the structure is simplified, the cost is reduced, easy installation and maintenance. â?? long life: traction chain using long pitch, sleeve roller chain, chain parts are alloy steel materials; and heat treatment processing, wear. The weight of the conveying part and the material is borne by the load bearing; the chain no longer bear the weight and reduce the wear. â?? process layout and diverse: horizontal, tilt, but also by the multi-level horizontal, inclined combination of arrangements. Applicable areas â?? widely used in cement, paper, sugar, chemical and other industries. The most suitable for the material slurry type, granular and so on. www.cnhrmachinery.com
Surgical drillProducts Description:Application domain:for implantologyMaterial:Ultra high rust-proof and high wear-resistant stainless steel,ceramicLZQ is an OEM factory for all kinds of dental implant drills, such as Guide Drill, Profile Drill, Parallel Pin, Drill Key, Lance Drill, Kirschner Wires, etc. We can also produce a whole kit of tools for customers' surgical cases.The cutting edge can be produced with different materials (ceramic, carbide, superhigh anti-rust and high wear resistant stainless steel (AA), Ti, Ti alloy, generally anti-rust and high wear resistant stainless steel (A) ... series).Hollow core inner hole process grade (independent of material grade & edge process grade): AA grade: raw material with hole + pure mirrow grinding of hollow core inner hole (hollow core inner hole &R0.01) (AAA) (high cost, not commonly used). AA grade: raw material with holes, CFDA standard hollow core inner hole (AA) (relatively high cost, not commonly used). Electrical discharge machining (EDM) process AA & A grade material + hollow core inner hole grinding (hollow core inner hole grinding grade & Different cost for different grade) (A&AA) (high cost, not commonly used).â?£ Deep hole drilling AA&A grade material hollow core inner hole (limited by the ratio of the inner hole diameter & hole depth, conventional inner hole diameter x hole depth (30~40) times approximately) (B) (low cost, but requires batch processing).â?¤ Electrical discharge machining (EDM) processing AA & A grade raw material hollow core inner hole, the inner hole is relatively rough (C) (low cost, regular stock).brake sheet drill bit, brake sheet drill bi
Specifications Op 2.1 duplex service drop Applications To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75 maximum. 2.2 triplex service drop Applications To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for pe insulation or 90 maximum for xlpe insulation. 2.3 quadruplex service drop Applications To supply 3 phase power, from a pole-mounted transformer to the use`s servic head where connection to the service entance cable is made. To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for pe insulated conductors or 90 for xlpe insulated conductors. Conductor standards: 1. B-230 aluminum wire, 1350-h19 for electrical purposes. 2. B-231 aluminum conductors, concentric-lay-stranded. 3. B-232 aluminum conductors, concentric-lay-stranded, coated steel reinforced (acsr). 4. B-399 concentric-lay_stranded 6201-t81 aluminum alloy conductors. 5. B498 zinc-coated steel core wire for aluminum conductors, steel reinforced (acsr). 6. Duplex service drop cable meets or exceeds all applicable requirements of ansi/icea s-76-474
Single plate screen changer: Plate and screen changer are all made 38CrMoAl alloy steel. Group leak-protection sheel set of changing reseau: It is suitable for the filter of high transparent, high viscidity, fissility, and plastic of high molecular quantum. Characteristic: The mould group leak-protecition steel set of changing reseau filter fleetly, which can dismantle and fix the tatty steel set neatly needn't process separately. New Technology T-Die Extrusion Machine 1. Come with bulit-in sealing devive to ensure sound tightness and allow for mass production of any polymers. Capable of being coupled with extruders of various specifications. 2. Screen -changing time less than 2 seconds. The filtering area may vary between? 30mm 250mm. 3. Come with grinding--resistant, pressure--resistant and high precision filter to ensure maximized filtering area and optimized filtering results. Its performance will not be compromised when the pressure is kept between 25--30Mpa and temperature around 300C. 4. Nearly all the polymers are fit for screen changer, such as PC, PMMA, PET, PS, PP, PU, PE, EVA, ABS etc. How to Order 1. Standard packing is wooden case; 2. Delivery: By sea, by air or others, depend on you; Our Superiority 1. Delivery on Time; 2. Professional Service: Customized is our advantage; 3. Good Quality: Ce, SGS, BV, TUV Certificated; 4. Fast and Low Cost Deliver: Long-term cooperated shipping forwarders; Packaging: Packing: Wooden case Port: Shanghai or Ningbo
Radiant tube steam superheaters are one of the most important accessories of boiler that improves the thermal efficiency. In super heaters there should not be any fins as it increases the thermal stresses and carful should be taken when choosing the superheater material that is stand for high temp and corrosion resistance. Parameter China supplier argon arc welding radiant tube steam superheater with best price We are boiler parts manufacturer, we supply boiler parts with high quality. Info.of pipes O.D. 10MM to 114MM W.T. 0.8MM to 15MM Tolerance AS STANDARD Certificated by TUV,SGS,ISO Other service Special specifications are aslo supplied according to customers' requirements Payment as the order Delivery time Within 30days upon receving the deposit, Company name  Shandong Hengtao Energy Saving & Environment Protection Co., Ltd. Market Asia,Europe,North America, Africa and so on Please feel free to contact me to know more information about the products,and warmly welcome to visit our factory when you come to China Contact information Material China supplier argon arc welding radiant tube steam superheater with best price is made of bare pipes (including carbon steel, alloy steel, heat resistant steel, etc), headers and other auxiliary materials. The pipes generally have OD32, OD38, OD42, etc or customized specifications for the users. Features With the artistic appearance and accurate size, the advance process for bending tube and welding, the first rate test equipment and sophisticated technology. Application Reheaters and superheaters are a set of tubes located in the boiler. Steam from the water walls passes to the superheaters where it is heated above its saturation temperature until the maximum required operating temperature is achieved. The superheated steam then flows through the main steam piping to the high-pressure turbine. Exhaust steam from the high-pressure turbine is guided to the boiler for reheating and from there to the intermediate and low-pressure turbines. High reheating temperatures improve the output and efficiency of a power plant.
coil typed tube boiler pressure parts reheater for coal fired boiler Description: In power station boilers, the effect of superheaters is to heat the steam to certain temperature for higher efficiency of the power station. Reheaters are steam superheaters to reheat the over-worked long-pressure or middle-pressure steam to certain temperature. The use of rehearters can further improve heat power of the power station circulating and control the steam temperature of the end blades of the steam turbine within allowed range. Zigzag superheaters and reheaters of the Company are also unique with rigorous production technique, first-class production flow line and complete test methods. Accessory of coil typed tube boiler pressure parts reheater for coal fired boiler It is consisted of a serious of bare coil (carbon steel, alloy steel, or durable heat steel) and header and other auxiliaries. Tubes Ï?32, 38, 42 and so on, also as the request. Structure Horizontal or vertical. Characteristic of coil typed tube boiler pressure parts reheater for coal fired boiler With the artistic appearance and accurate size, the advance process for bending tube and welding,the first rate test equipment and sophisticated technology. Pls feel free to contact me for any inquiry: Sunny/Jia International Dept. Add: Xiazhuang Industrial Park, Gaomi City, Shandong Province, China Tel: +86-536-2215771 Fax:+86532-2215367
Square head bolt Standard: Asme b 18.2.1;gb/t8 Size: 1/4â?�-1 1/2â?�; m6-m38 Material: Carbon steel, alloy steel, stainless steel, brass Grade: Sae j429 gr.2, 5, 8; a307 gr.A; class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping;high quality;competitive price;timely delivery;technical support;supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Heavy hex structural bolt Standard: Asme b 18.2.1;din6914;gb1228;gb3632 Size: 1/2â?�-1-1/2â?�, m12-m36 Material: Carbon steel, alloy steel Grade: Astm a325, a490, cl10.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel;metal building;oil&gas;tower&pole;wind energy;mechanical machine;automobile;home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
S-316N S-316A SHUR-LOC - Eye Hook Chain Size S-316A Stock No. Grade & Alloy chain working load limit(tons) 4:1 Wire Rope XIP IWRC Mechanical Splice Weight each kg in mm size (mm) Working load limit (tons) 5:1 6 1097918 1.12 8 0.9 0.39 1/4-5/16 7-8 1097920 2.0 11 1.7 0.82 3/8 10 1097921 3.15 13 2.3 1.47 1/2 13 1097922 5.3 16 3.5 2.70 5/8 16 1097926 8.0 22 6.9 5.78 * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. Positive Lock Latch is Self-Locking when hook is loaded Forged Alloy Steel- Quenched and Tempered Rated for both Wire Rope and Grade 8 Chain Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting Fatigue rated. The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B) G-414 Heavy Thimble should be used with wire rope slings Individually Proof Tested at 2-1/2 times the Working Load Limit with certification Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger Designed with Engineered Flat to connect to Grade . 8 chain fittings.
The 35 Series Yoke & Tube Assembly is an extremely durable PTO shaft yoke built to last. This PTO Yoke has an 1-2/9 inch. square bore that makes it easy to connect. The length of the shaft is Centerline (Center of Ear hole to rear of the tube) 34-2/3 inches. Tube Outer Diameter 1-9 in. Tube Inner Diameter 2-9 inches. square The PTO drive shaft yoke runs at 108 kilowatts/81 HP at 1000RPM or 70 HP/52 Kilowatts @ 540 RPM for maximum efficiency. Weight of PTO's yoke: 12.06 lb. How Does Tractor PTO Shaft Work? The PTO shaft is the one that transfers the power of your tractor onto the machine you prefer. This PTO driveline is the place that everything else that requires power from a tractor gets its energy from. PTO drivelines can be ignored during routine maintenance checks because they are so important when operating farm equipment. What are the components of the PTO Tractor Shaft Drive Shaft? 1. The tractor yoke PTO assembly begins with this kind of yoke. It is attached to the tractor and is used to connect to the power train. There are two primary kinds of tractor yokes. One type includes a spring lock which utilizes a spring-loaded neck to join and unhook the yoke. The second is a quick-to disconnect, which connects using a pushpin. The tractor yoke could be identified as a six-spline, 20-spline or 21-spline to indicate the way it connects to the connector to the tractor. It is identified by counting the notches in the collar of the yoke. 2. Kit for Bearing and Cross- This u-joint is used to connect the yokes within the PTO assembly. Its cross-bearing kit could contain a snap ring within the bushing internally or externally. This means that it is located in the ear that connect the yoke. 3. Shaft Yoke - A cross and bearing kit joins the tractor yoke and the shaft of driveline. 4. Shaft - The shaft is the rod made of steel that is located at the heart of the driveline that provides its length as well as connecting the yoke to the attachments. 5. Tube-The shaft goes through this cylinder of steel, adding an extra layer of protection to the driveline 6. Tube Yoke- Connected to the tube's tip it connects the driveline and the device by using a cross that is connected to a bearing kit. 7. Implement YokeThe Implement Yoke links the driveline and the device or machine which is operated by the tractor. 8. Guard- A tough plastic covering is positioned around the driveline to protect it from the driveline from being damaged during operation.
Cooling Tower Gearbox The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is generally used for transmission equipment with low speed and large torque. It uses all levels of gear transmission to achieve the purpose of speed reduction. The gear is made of high strength low carbon alloy steel by carburizing and quenching, and it is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing, dyeing, pharmaceutical, and other fields. Advantages Low noise emission due to torsionally rigid housing Variable output bearing sizes for different ventilator types (depending on the ventilation track) Highest operational reliability due to one-piece housing, reinforced bearings and centrifugal disk on the ventilator shaft Additional cooling by means of a fan cooler on the input shaft Long service life due to optimized gearbox selection and use of high-grade materials Complete drive system from a single source As one of the professional cooling tower spare parts suppliers and cooling tower gearbox manufacturer, we provide different types of cooling tower parts, such as gearboxes. You can select what you need from the different types of cooling tower gearbox below.
Cooling Tower Gearbox The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is generally used for transmission equipment with low speed and large torque. It uses all levels of gear transmission to achieve the purpose of speed reduction. The gear is made of high strength low carbon alloy steel by carburizing and quenching, and it is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing, dyeing, pharmaceutical, and other fields. Advantages Low noise emission due to torsionally rigid housing Variable output bearing sizes for different ventilator types (depending on the ventilation track) Highest operational reliability due to one-piece housing, reinforced bearings and centrifugal disk on the ventilator shaft Additional cooling by means of a fan cooler on the input shaft Long service life due to optimized gearbox selection and use of high-grade materials Complete drive system from a single source As one of the professional cooling tower spare parts suppliers and cooling tower gearbox manufacturer, we provide different types of cooling tower parts, such as gearboxes. You can select what you need from the different types of cooling tower gearbox below.
Description Pup Joint, also referred to as Riser Spool, or Surface Riser Spool is a pressure-containing piece of equipment having end connections, used below or between drill-through equipment. The Spacer spool is a wellhead section that has no provision for suspension of tubular members and which may have no provision for sealing of tubular members. It is used to provide separation between two components with equal-sized end connections. providing exceptional performance as a wellhead extension, securing connection for choke manifold and kill manifold. Features A. Flanged, studded, and rubbed ends are available in any combination. B. We can produce a spacer spool for any combination of size and pressure ratings. C. Integral forged material ensures excellent reliable working performance. D. spacer spools are designed to minimize length while allowing sufficient clearance for wrenches or clamps unless otherwise specified by the customers. E. The standard Spacer Spools do not include outlets, although outlets can be added as per request. F. Our spacer spool is suitable for general working conditions and sour service. G. Stainless Steel 316L or Inconel 625 corrosion-resistant alloy ring grooves are also available. H.Normally we will provide tap-end studs and nuts with studded-end connections.
Type III aluminum anodizing, also called hardcoat aluminum anodizing can be applied to CNC machined aluminum parts to increase their wear and corrosion resistance. A highly abrasive resistant coating will be formed on the hard coat anodized aluminum parts, the metal surface will be harder even than tool steel. The thermal and dialectical properties will also be improved. Junying is a full CNC services supplier that provides an extensive range of surface finishing and post-processing processes for 6061-T6 aluminum parts, including as machined and anodizing type 2 and type 3. Based on your drawings and requirements, weâ??ll perform the specific aluminum anodizing to reach desired appearance and specification with visual aesthetics and high uniformity, hardcoat anodizing can change the color of the aluminum machining parts depending on the alloy grades and anodic thickness. A deep gray-black color is more common for 6xxx-series of aluminum. Please feel free to contact us for more details about our aluminum anodizing services, if tight tolerances are needed, we will keep in close communication with customers to ensure the required dimensions and precision can be achieved.