A swage nipple eccentric is a type of pipe fitting that is used to connect two pipes at an angle. The fitting has an eccentric bore, which means that the center of the bore is offset from the center of the fitting. This allows the fitting to be aligned with the two pipes at an angle. The technical specifications of a swage nipple eccentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples eccentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple eccentric: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.
Forged flanges are a type of flange that is commonly used in highpressure piping systems They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel Forged flanges are stronger and more durable than cast flanges making them a better choice for applications where high pressure andor temperature are present Benefits of Forged Flanges High strength and durability Better resistance to corrosion and wear Can withstand high pressure and temperature Available in a variety of sizes and materials Applications of Forged Flanges Piping systems Valves Pumps Heat exchangers Pressure vessels Types of Forged Flanges Slipon flanges Socket weld flanges Lap joint flanges Threaded flanges Blind flanges Spectacle blind flanges Selection of Forged Flanges When selecting forged flanges it is important to consider the following factors The pressure and temperature rating of the piping system The type of material that the flange is made from The size of the flange The type of connection that the flange will be used with Forged flanges are a critical component of many piping systems They provide a strong and reliable connection between pipes valves and other equipment Additional Information Forged flanges are typically made from carbon steel stainless steel or alloy steel Forged flanges are available in a variety of sizes from NPS 12 to NPS 24 Forged flanges are available in a variety of pressure ratings from PN 25 to PN 400 Forged flanges are available in a variety of connection types including slipon socket weld lap joint threaded and blind flanges
Carbon Steel Forged flanges are a type of flange that is commonly used in high-pressure piping systems. They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel. Forged flanges are stronger and more durable than cast flanges, making them a better choice for applications where high pressure and/or temperature are present. Benefits of CS Forged Flanges â?¢ High strength and durability â?¢ Better resistance to corrosion and wear â?¢ Can withstand high pressure and temperature â?¢ Available in a variety of sizes and materials Applications of CS Forged Flanges â?¢ Piping systems â?¢ Valves â?¢ Pumps â?¢ Heat exchangers â?¢ Pressure vessels Types of CS Forged Flanges â?¢ Slip-on flanges â?¢ Socket weld flanges â?¢ Lap joint flanges â?¢ Threaded flanges â?¢ Blind flanges â?¢ Spectacle blind flanges Selection of CS Forged Flanges When selecting forged flanges, it is important to consider the following factors: â?¢ The pressure and temperature rating of the piping system â?¢ The type of material that the flange is made from â?¢ The size of the flange â?¢ The type of connection that the flange will be used with CS Forged flanges are a critical component of many piping systems. They provide a strong and reliable connection between pipes, valves, and other equipment. Additional Information â?¢ Forged flanges are typically made from carbon steel, stainless steel, or alloy steel. â?¢ Forged flanges are available in a variety of sizes, from NPS 1/2 to NPS 24. â?¢ Forged flanges are available in a variety of pressure ratings, from PN 2.5 to PN 400. â?¢ Forged flanges are available in a variety of connection types, including slip-on, socket weld, lap joint, threaded, and blind flanges.
Product Name: Hammer Union Brand: S K Material: Carbon Steel, Stainless Steel, or Alloy Steel Sizes Available: Ranging from 1" to 12" Pressure Rating: Varies according to size and material (e.g., 1,000 PSI to 20,000 PSI) Thread Type: NPT, API line pipe, or butt-weld Description: A hammer union is a robust, threaded connection fitting designed for use in oil, gas, and hydraulic applications. It provides a quick and reliable means of connecting various fluid transfer lines in high-pressure environments. The union comprises three main components: a threaded male end, a threaded female end, and a nut with a hammer lug or nut for secure tightening. Key Features: High Pressure Capability: Constructed from durable materials, the hammer union offers excellent resistance to high-pressure conditions, making it suitable for rigorous industrial applications. Versatile Connection: Its threaded ends facilitate easy and rapid connections and disconnections, ensuring efficiency in assembly and maintenance. Variety of Sizes and Materials: Available in different sizes and materials such as carbon steel, stainless steel, or alloy steel, providing versatility to meet specific operational requirements. Reliable Sealing: Equipped with robust seals or elastomers to prevent leakage, ensuring a secure and tight connection during operations. Adaptability: Compatible with a range of pipe sizes and pressure ratings, making it adaptable to diverse industrial setups. Applications: Oil and Gas Industry: Used in drilling rigs, well testing operations, and oilfield services for temporary pipe connections. Hydraulic Systems: Employed in high-pressure hydraulic systems for quick and reliable hose connections. Industrial Pipelines: Suitable for transferring fluids in pipelines where a robust and secure connection is essential. The hammer union's design and construction adhere to industry standards, ensuring reliability, durability, and safety in demanding operational environments. It is a crucial component for facilitating efficient fluid transfer in various industrial sectors.
A slip on flange is a type of flange that is designed to slip over a pipe and be welded in place. The flange has an inner diameter that is slightly larger than the outer diameter of the pipe, so that the pipe can be inserted into the flange and welded in place. Slip on flanges are commonly used in piping systems where the flanges need to be installed quickly and easily. Technical Specifications: A. Nominal pipe size (NPS): 1/2 inch to 24 inch B. Class range: Class 150 to 2500 C. Types: RF,FF D. PN range: PN 2.5 to PN 250 E. Materials: Carbon steel, stainless steel, alloy steel F. Standards: ANSI B16.5, BS 3293, DIN 86029 Applications: Slip on flanges are commonly used in low-pressure applications, such as water and gas piping. They are also used in some high-pressure applications, such as fire sprinkler systems. Benefits: 1. Slip on flanges are easy to install. 2. Slip on flanges are cost-effective. 3. Slip on flanges are available in a variety of sizes and materials. 4. Slip on flanges can be ordered with a variety of features.
A blind flange is a type of flange that does not have a bore in the center. It is used to block off the end of a pipe or vessel. Blind flanges are available in a variety of materials, including carbon steel, stainless steel, aluminum, and plastic. They are also available in a variety of face types, including flat face, raised face, and ring joint. Technical Specifications A. Material: Carbon steel, stainless steel, aluminum, plastic B. Face type: Flat face, raised face, ring joint C. Bolting pattern: ANSI B16.5, ASME/ANSI B16.47, DIN 2576, API D. Pressure rating: 150 to 2500 psi E. Type: RF,FF,RJT F. Temperature rating: Up to 1200�°F Blind flanges are used in a variety of applications, including: 1. Blocking off the end of a pipe or vessel 2. Providing a support for a gasket 3. Sealing a nozzle opening on a pressure vessel 4. Providing a temporary closure for a pipe or vessel The benefits of using blind flanges include: I. They are a versatile and cost-effective way to block off the end of a pipe or vessel. II. They are available in a variety of materials and face types to meet different application requirements. III. They are easy to install and maintain. To order a blind flange, please contact us and provide us with the following information: I. Material II. Face type III. Bolting pattern IV. Pressure rating V. Temperature rating VI. Quantity
Product Description A socket weld flange is a type of flange that is used to connect two pieces of pipe together. It is made up of a flange body with a socket, which is a recess that the pipe is inserted into. The pipe is then welded to the flange body, creating a secure connection. Socket weld flanges are typically used in small-diameter pipes, up to 4 inches in diameter. They are a popular choice for applications where internal welding is difficult or impossible, such as in high-pressure or high-temperature systems. Technical Specifications 1. Materials: Carbon steel, stainless steel, alloy steel, nickel alloy, copper alloy 2. Classes: 150, 300, 400, 600, 900, 1500, 2500 3. Face type: Flat, Raised and Ring Joint 4. Finish: Black, hot dip galvanized, epoxy coated 5. Dimensions: ANSI B16.5, ASME B16.47, MSS SP44 Advantages of Socket Weld Flanges A. Simple to install B. Secure connection C. No need for internal welding D. Suitable for small-diameter pipes
A lap joint flange is a type of flange that is used in piping systems. It is made up of two parts: a stub end and a lap joint ring flange. The stub end is butt welded to the pipe, and the lap joint ring flange is then slid over the stub end. The flange ring has a flat face that is used to seal against the gasket. Technical Specifications Material: Carbon steel, stainless steel, alloy steel Size: 1/2" to 48" Pressure class: 150 to 2500 Face type: Flat Face Sealing method: Gasket Advantages of Lap Joint Flanges Easy to install and maintain Can be used in a variety of materials and sizes Available in a variety of pressure classes Applications Lap joint flanges are used in a variety of applications, including: Chemical processing Oil and gas Power generation Water treatment
A long weld neck flange LWN flange is a type of flange that has a long tapered neck that extends from the flange face to the pipe This longer neck provides more support to the pipe at the weld joint making it a more robust and reliable connection LWN flanges are typically used in highpressure and hightemperature applications such as in the oil and gas industry Technical Specifications Dimensions 12 to 24 in diameter The neck length is typically 15 to 2 times the flange diameter Materials Carbon Steel Stainless Steel or Alloy Steel Pressure ratings 150 psi to 2500 psi Temperature ratings 200F to 1000F Types RFFFRTJ LWN flanges are used in a variety of applications including Oil and gas industry Chemical industry Power generation Water treatment HVAC The benefits of using LWN flanges include Increased strength and reliability Longer service life Wider range of applications Easier to assemble and disassemble
An orifice flange is a type of flange that is used to measure the flow rate of fluids in a pipeline. It consists of a flange with two pressure tappings machined into it, opposite each other. The orifice plate is installed between the two flanges, and the pressure drop across the orifice plate is used to calculate the flow rate. Orifice flanges are typically made from carbon steel or stainless steel, and they are available in a variety of sizes and materials. They are used in a wide variety of industries, including oil and gas, chemical, and water treatment. Technical Specifications: Material: Carbon steel, stainless steel, other materials Size: NPS 1/2 to NPS 24 Inch Pressure rating: 150 to 1500 psi Temperature rating: -40 to 800�?�°F Finish: Black, hot dip galvanized, other finishes Applications Orifice flanges are used in a variety of applications, including: Oil and gas pipelines Chemical plants Power plants Water treatment plants HVAC systems Benefits Orifice flanges offer a number of benefits, including: Accuracy: Orifice flanges are a very accurate way to measure flow rate. Durability: Orifice flanges are made from durable materials that can withstand harsh environments. Cost-effectiveness: Orifice flanges are a cost-effective way to measure flow rate.
A JIS plate flange is a type of flange that is manufactured according to the Japanese Industrial Standard (JIS). JIS plate flanges are typically made of carbon steel, stainless steel, or alloy steel. They are available in a variety of pressure classes and sizes. Technical Specifications Standard: JIS B2220 Materials: Carbon steel, stainless steel, alloy steel Pressure classes: 1.0, 2.5, 6.0, 10.0, 16.0, 25.0, 40.0, 64.0 Sizes: NPS 1/2 - NPS 60 Facings: FF, RTJ, RF Bolt holes: ANSI B16.5 or JIS B2220
A spectacle blind flange is a type of isolation device used in piping systems. It is a forged steel plate that consists of two interconnected discs: a ring with a hole of the same bore size as the pipeline, and a solid disc. In normal conditions, the spectacle blind is installed in the open position and does not interrupt the flow of the fluid conveyed by the pipeline. To stop the flow, the blind end is rotated into place between the flanges. Spectacle blinds are available in standard sizes up to 24 inches and in forged material grades like ASTM A105 (high-temperature carbon), A350 low-temperature carbon), and various ASTM A182 grades (alloy, stainless steel, duplex). They are typically used in conjunction with flanges, and are available with raised face (RF), flat face (FF), or RTJ faces. Technical Specifications of Spectacle Blind Flange Material: Carbon steel, low-temperature carbon steel, stainless steel Standard: ASME B16.48 Size: Up to 24 inches Face: RF, FF, RTJ Handle: Yes
A blind and spacer flange is a type of flange used to isolate a section of pipe or equipment. It is made up of two parts: a solid disc called the "spade" and a ring with a hole in the center called the "spacer". The spade is inserted into the spacer and then bolted in place between two flanges. This creates a barrier that prevents fluid flow through the pipe. Blind and spacer flanges are used in a variety of applications, including: 1. Maintenance and repair 2. Testing and commissioning 3. Decommissioning 4. Temporary isolation Technical Specifications 1. Material: Steel, stainless steel, or other non-corrosive materials 2. Size �½â?? inch to 24â?? Inch 3. Face finish: Raised face, Flat face, or Grooved face 4. Pressure class: 300, 600, 900, 1500 or 2500 psi Benefits Blind and spacer flanges offer a number of benefits, including: â?¢ They are a cost-effective alternative to isolation valves. â?¢ They are easy to install and remove. â?¢ They provide a reliable seal against fluid flow. â?¢ They are available in a variety of sizes and materials to meet the needs of different applications. Applications Blind and spacer flanges are used in a variety of industries, including: 1. Oil and gas 2. Chemical 3. Power 4. Water treatment 5. HVAC
Forged threaded fittings are one of the oldest types of pipe fittings that have been used for ages. They are made by forging solid blocks of steel into the desired shape, and then threading the ends to create a female or male thread. Forged threaded fittings are typically used for piping applications where pipes have a smaller bore and diameter, such as water distribution systems, cooling systems, and fire protection systems. Technical Specifications Materials: Carbon steel, stainless steel, alloy steel Sizes: 1/8" to 4" nominal pipe size (NPS) Pressure ratings: 2000, 3000, 6000, and 9000 psi Threads: Tapered Applications: Water distribution systems, cooling systems, fire protection systems, other low-pressure applications
Forged socket weld fittings are pipe fittings that are used to connect two pipes together. They are made from forged steel, which makes them strong, durable, and resistant to corrosion and high pressure. Forged socket weld fittings are available in a variety of shapes and sizes, including elbows, tees, reducers, unions, and couplings. They are typically used in piping systems that transport water, oil, gas, and other fluids. Pressure rating: Class 3000, Class 6000, and Class 9000 Material: Carbon steel, stainless steel, alloy steel Size: 1/8" to 4" Style: Elbows, tees, reducers, couplings
A forged street elbow threaded is a type of pipe fitting that is used to join two pieces of pipe or tubing at a 90-degree angle. It has a female fitting on one end and a male fitting on the other, which allows it to be connected to pipes with either male or female threads. Forged street elbows are typically made from carbon steel, stainless steel, or alloy steel, and are available in a variety of sizes and bend angles. Specifications: Material: Carbon steel, stainless steel, or alloy steel Size: 1/8" NB to 4" NB Bend angle: 90 degrees Thread type: NPT or BSP Pressure rating: 150 psi to 2500 psi Temperature rating: -65 F to 1200 F
A forged threaded coupling is a type of pipe fitting that is used to connect two lengths of threaded pipe. It is made from a solid piece of metal that is then threaded on both ends. Forged threaded couplings are typically made from steel, stainless steel, or brass. They are available in a variety of sizes and pressure ratings. Specifications: Material: Carbon steel, stainless steel, alloy steel, nickel alloy Size: 1/8 inch to 4 inches NPS Pressure rating: Varies depending on material and size Thread type: NPT, BSP, BSPT Finish: Black, galvanized, stainless Applications: Oil and gas industry, chemical processing industry, petrochemical industry, water treatment industry, HVAC industry, fire sprinkler industry
A long radius long sweep swivel joint is a type of swivel joint that has a longer radius of curvature than a standard swivel joint This longer radius allows for smoother rotation and less turbulence which can improve flow characteristics and reduce wear and tear on the joint Long radius swivel joints are often used in high pressure applications such as oil and gas drilling where smooth rotation and low turbulence are critical Here are some of the applications of long radius swivel joints Oil and gas drilling Fluid handling Mud lines Sour gas Acidizing and fracturing Testing lines Crude oil and gas Here are some of the specifications of long radius swivel joints Sizes 14 inches Working pressure 300020000 psi Materials Steel stainless steel alloy steel End connections Threaded flanged union Working Pressure 25 Mpa 70 Mpa
A weld neck flange is a type of flange that is joined to a piping system by butt welding. The flange consists of a circular fitting with a protruding rim around the circumference. The rim has a series of drilled holes that permit the flange to be affixed to another flange with bolts. The flange also has a long tapered hub that gradually meets the wall thickness of the pipe or fitting. Technical Specifications: Materials: Carbon steel, stainless steel, duplex steel, alloy steel, etc. Dimensions: 1/2" to 24" Class range: Class 150 to 2500 (ANSI/ASME B16.5) Type: RF,FF,RJT PN range: PN 2.5 to PN 250 Hub length: Short hub (SH), Long hub (LH), Extra long hub (XH) Finish: Black, mill finish, painted, etc. Advantages of Weld Neck Flanges: Increased strength and durability Reduced stress concentration Smooth transition from flange thickness to pipe or fitting wall thickness Easy to radiograph for flaw detection Can be used in high pressure and high temperature applications Applications: Power plants Chemical plants Oil and gas industries Water treatment plants HVAC systems Other industrial applications
A threaded flange is a type of flange that uses a screw thread to connect the flange to a pipe. A male thread is cut onto a pipe end whilst a female thread is cut into the bore of the flange; the male threaded pipe is then screwed into the female threaded flange. Threaded flanges are available in a variety of sizes and pressure ratings, and are typically made from Various Materials. Technical Specifications 1. Materials: Carbon steel, stainless steel, alloy steel, 2. Size: �½ inch to 24 inches 3. Classes: 150, 300, 400, 600, 900, 1500, 2500 4. Thread type: NPT, BSP, BSPT, BSPP 5. Face type: Flat, Raised and Ring Joint 6. Dimensions: ANSI B16.5, ASME B16.47, Advantages of Threaded Flanges: A. Easy to install and maintain B. No welding required C. Suitable for a variety of applications D. Available in a variety of sizes and pressure ratings Applications: Threaded flanges are used in a variety of applications, including: a. Water and wastewater systems b. Oil and gas pipelines c. Chemical processing plants d. HVAC systems e. Fire protection systems
