SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
Foot Massage Ball, Spiky Mini Massage Ball, Deep Tissue Massage Ball For Sale Spiky Massage Ball System Parameters: Product Name Bulk Small Pilates Spiky Mini Deep Tissue Massage Ball for Back Pain Exercises Material: PVC Color: Custom Color Size: 5/6/7/8/9/10cm or Custom Size Logo: Custom Logo MOQ: 500pcs Delivery time: (1)7-10 working days-for existing products (2)10-15 working days-if need customized logo OEM Service: Yes Certification Available: Yes Packing details: Poly Bag+Carton Production Capacity: 200000 Piece/Pieces per Month Payment Term: L/C,T/T,D/P,PAYPAL,Trade assurance Spiky Massage Ball Description: Imagine yourself feeling totally relaxed, pain and stress free after a long hard day. SAVE YOUR PRECIOUS TIME AND MONEY and HAVE AN INSTANT PAIN AND STRESS SOLUTION available anytime and anywhere! Afford it quickly with our Massage ball foot rollers. You will love and enjoy the Best massage therapy with our physical therapy Balls! Wouldn't you love to easily RECOVER YOUR PLANTAR FASCIITIS, IMPROVE REFLEXOLOGY and eliminate those stubborn Headaches or Backaches without taking pills? Due to high quality and pvc material our compact stress ball with strong spikes will provide you the deepest body and tissue massage effect with the softest touch with your skin. Ease your tight muscles with our trigger point massage roller ball.You can use our massage roller for massaging the feet or hands before, during or after physical activity for tight muscles and cramping in conjunction with rehabilitation to complement physiotherapy treatment. When the balls need cleaning simply soak them in soap water for a few minutes, thoroughly rinse and air dry. It is also known by various names, including massage ball, yoga massage ball, foot massage ball, hand massage ball, spiky massage ball, deep tissue massage ball and therapy ball. It can also be used inphysical therapy and athletic training, with below functions: 1. Experience a full body and muscle relief 2. Enhance body awareness 3. Correct bad posture 4. Reduce joint stiffness 5. Improve flexibility both in individual muscles and large muscle groups 6. Increase blood flow to local areas, which in turn can improve blood circulation 7. Spiky Balls are used to soften the muscle and help to relieve muscle tension in specific areas of the body which is causing niggling pains. They can also release the Fascia especially in the foot. Bingehua specializes in the production and export of fitness accessories, body-sculpting and power training goods, mainly including yoga ball, Resistance Band Loop, Half Balance Ball, etc. Our own factory was founded more than 10 years.
Quartz Sand Proppant Quartz sand proppant, also known simply as frac sand or proppant, plays a crucial role in hydraulic fracturing (fracking) operations in the oil and gas industry. What Are The Different Types Of Quartz Sand Proppant? During the hydraulic fracturing process, clean fracturing fluid is initially pumped to create sufficiently wide fissures. Subsequently, a mixture of proppant and fracturing fluid, commonly referred to as slurry, is injected into these fractures.The primary design objective of proppants is to fill the fracture space, possessing enough strength to keep the fracture walls separated. This ensures the maintenance of a conductive pathway to the wellbore even after the completion of the treatment and potential leakage of fracturing fluid. Types of Proppants for Hydraulic Fracturing Proppants for hydraulic fracturing applications can be broadly categorized into two types: natural silica sand and synthetic ceramic proppants. Fracturing quartz sand is a highly pure, granular material with hardness and toughness. Its main component is silica, and its particle size meets the requirements of fracturing operations. This kind of quartz sand has high density and compressive strength and is not easily washed away and worn by fluids. What Is The Density Of Quartz Sand Proppant? Most resin-coated proppants still have a sand base. However, their shape is smoother and more rounded, improving their performance compared to traditional fracking sand. In contrast to irregularly shaped natural sand proppants, they exhibit lower compaction in fractures, resulting in higher permeability compared to other types of proppants.
Introduction The ARTB series filter cartridge uses high-purity titanium powder as the raw material, processed through high-temperature vacuum sintering. It features high porosity, uniform pore size distribution, and unique capabilities to withstand temperatures up to 300 degrees Celsius (in wet conditions) as well as strong acids and alkalis. This product is easy to backwash, enabling effective regeneration, and is suitable for separating and purifying various gases or liquid media. Specification Filter material: High-purity titanium Pore size: 0.22 ~ 100 micron Length: 5" ~ 40" Diameter: 60 ~ 100 mm Physical regeneration methods: a. Pure water backwashing b. Steam blowback c. Ultrasonic cleaning Chemical treatment methods: a. Alkaline washing b. Acid washing Interface type: 222, 226, 215, DOE, M20, M30, M36, M42 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical industry: Decarbonization and impurity removal filtration in the production of raw pharmaceutical materials. Chemical industry: Filtration of strong acidic and alkaline chemical solvents. Water treatment industry: Pre-filtration for reverse osmosis systems, seawater desalination, wastewater treatment systems, etc. Gas industry: Purification of compressed air and catalytic gases, filtration in ozone sterilization systems. Food industry: Clarification filtration for food and beverages, edible oils, soy sauce, vinegar, and other products.
Description for S&S Cycle T124 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three Piece Flywheel assemblies with main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 cam Stock 96 Twin Cam bolt patter Forged dished piston 4-1/8 bore 4-5/8 stroke 10.2:1 compression ratio Requires oil line installation kit 434-336 for 1999-2006 FLT models, 434-335 for 1999-05 Dyna models 58MM throttle body highly recommended Carbureted engines will require a performance ignition module that allows adjustments to the advance curves S&S engines are shipped without oil 2 Year Warranty
Description for S&S Cycle T111 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three piece flywheel assemblies with the main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 camshafts Stock 96 Twin Cam bolt patter Forged piston 9.8:1 compression ratio 4-1/8 bore 4-1/8 stroke Requires oil line installation kit 725-169 S&S engines are shipped without oil 2 Year Warranty
Arm seal kit also know as arm cylinder seal kit.The china arm seal kit introduce know is used on the arm hydraulic cylinder of excavator,Mainly used to prevent hydraulic oil leakage and ensure that the middle arm can be used normally. Types of Arm Cylinder Seal Kit 14512950 14589140 Arm Cylinder Seal Kit Fits EC360 Excavator 707-99-67110 Arm Cylinder Seal Kit Fits PC300-5 Excavator Why Choose Sanping Arm Cylinder Seal Kit? Versatility: Arm cylinder seal kits are available in a variety of sizes and shapes, allowing them to be used in a variety of applications. Cost: Arm cylinder seal kits are generally less expensive than other sealing solutions, making them a more affordable option. Maintenance: Arm cylinder seal kits are easy to maintain, increasing the life of the seal. Arm Cylinder Seal Kit FAQs How Does Arm Cylinder Seal Kit Work? Air arms s410 seal kit are composed of two main components: the seal itself and the seal housing. The seal is made from a rubber material and is usually shaped in an oval or circular shape. The seal housing is a metal cylinder that is attached to the arm or shaft of the device. When the arm is turned, the seal is compressed against the sides of the housing, creating a seal that prevents air, liquids, or other materials from entering or leaking out. The seal also prevents dirt, dust, and other particles from entering the device. What is a Cylinder Seal Kit? A cylinder seal kit is a set of seals that are used to seal the connection between the cylinder and the piston in an engine or other mechanical apparatus. If you are looking for a reliable arm seal kit factory, don't hesitate to contact us! Contact us to buy china machinery spare parts.
GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness. Rational capacity design Various panel designs are used to design tanks of all capacities and dimensions. Convenient installation Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation. Excellent thermal protection Single panels are used for water tanks installed underground, while the insulated panels, which are single panel with insulation material compressed together, provide excellent insulation on water tanks installed outdoors.
Buna-N Rubber Products Buna N rubber products can take different forms, including sheets, seals, gaskets, o-rings, and molded parts. These products are manufactured using processes such as extrusion, compression molding, or injection molding. Features of Buna N Synthetic Rubber Products Buna-N rubber sheets are commonly used in applications that require resistance to oil, fuel, and solvents. They are found in gaskets, seals, or as protective linings for tanks, pipes, and conveyor belts. Buna-N rubber sheets offer excellent mechanical properties, making them suitable for applications in industries such as automotive, oil and gas, and chemical processing. Buna-N rubber seals and gaskets are used to create a reliable and leak-proof seal in mechanical systems, such as pumps, valves, and engines. They provide resistance to various chemicals and can withstand high pressures and temperatures. Buna rubber o rings are commonly used in hydraulic and pneumatic systems to seal connections and prevent leakage. They have excellent sealing properties, even in demanding environments involving oils, fuels, and hydraulic fluids. Molded Buna-N rubber parts are used in various applications, such as vibration mounts, grommets, and diaphragms. These parts offer flexibility, durability, and resistance to wear and tear, making them suitable for challenging industrial environments. Buna N rubber o ring products have a good balance of mechanical properties, including toughness, elasticity, and durability. They excel in applications that involve oils, fuels, and chemicals. However, they may have limitations when exposed to ozone, sunlight, and some polar solvents.
Standard accessories: Guide bar, Saw chain, Manual, Bar cover, Tool kit Quality & Inspection: 1. Cooperated with good reputation suppliers. 2. 100% check the quality of spare parts produced by supporting suppliers. 3. QC checks every step from spare parts to full-line production. Main features of Senwart cs070 gasoline chainsaw: 1. lightweight, full of safety features, consisting of inertia chain brake, chain catcher, felling spikes, and full anti-vibration damping. 2. Ergonomically designed handle, comfortable and balanced. 3. Automatic chain oil lubrication system. 4. Large and tool-free oil filler cap. 5. Easy to clean, maintain, and replace the air filter. Optional accessories: 1. Champion, NGK spark plug 2. Walbro, Tillotson carburetor 3. Oregon, Stihl chain & bar Crankshaft: Dual-ringed pistons provide better compression and longer engine life, double counterweighted crankshaft helps perfectly balance the engine, fan-shaped connector rod deliveries improved acceleration. Digital Ignition: Digital Ignition ensures easy starting in all conditions, a cleaner engine and reduced emissions. Carburetor: The engine utilizes the best quality brand carburetor. Piston: Lightweight pistons/2 piston rings Exhaust: Special materials (1.0mm thick) are used in production to reduce noise emissions. Packaging: Standard export carton, 5-layer box. If there is no special requirement, we will use standard export packing. OEM for above 500pcs. MODEL: CS070 Engine type : Single Cylinder, Two-stroke, Air-cooling Cylinder diameter : 58mm*40mm Power : 4.5kW / 6.0HP Displacement : 105.7cc Working speed : 7,500rpm Idle speed : 3,300rpm Fuel tank : 1200ml Oil tank : 530ml Fuel mixture ratio : 25:1(Gasoline 25 : 2-cycle Oil 1) Standard bar lengths : 36 inch/91.5cm Chain pitch/gauge : .404"/.063" Optional bar lengths : 30"-42" Weight (without bar/chain) : 12.5kg
Atmospheric Plasma Cleaning System chain conveyor Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Product advantages: 1. Significantly improve surface hydrophilicity and enhance bonding 2. Remove surface oil, fingerprints and other organic contamination horizontally, 3. Board walking speed 2~5 meters/minute 4. Double-sided processing is possible, and equipment can be customized according to production capacity 5. Processing under atmospheric pressure, no special gas is required, and installation and use are simple Product Specifications: 1 Dimensions L*W*H:1200*1150*1150 - 1500mm 2 Power supply Single-phase 220V, 50/60HZ, 12A 3 Conveying method Roller conveyor, chain conveyor, belt conveyor 4 Working environment Temperature: -10~40, relative humidity: 50%~93% (non-condensing) 5 Plasma generator 500-700W adjustable; optional 700-1200W (high power version) High power version is suitable for 50mm and 70mm spray guns @25-40KHz 6 Working gas Water-free and oil-free compressed air; optional argon, nitrogen, etc. 7 Effective processing Width 500mm, double-sided processing (optional), the number of rotating nozzles is optional 8 Rotating spray gun Processing width diameter: 50mm, optional 70, 30, 20mm 9 Support plate thickness < 3mm (special specifications of thick plates require special customization of the equipment) 10 Processing speed 2.0m/min ~ 5.0m/min 11 Cooling method Air cooling, factory exhaust > 400m3/h 12 Control system PLC+HMI
The vehicle mobile DVR represents a technologically advanced device designed to offer comprehensive recording, connectivity, and intelligent functionalities for vehicles. Such a automotive DVR combines cutting-edge technologies to enhance driving safety, provide real-time monitoring, and offer various smart features. Details of DVR Automotive Features 4Ch AHD AV input with 1080P/ 960P/ 720P/ D1/ CIF, 1Ch aviation AV output, and 1Ch VGA signal output. Its built-in high performance image processor and advanced H.264 video compression technology. It can pick up 3G / 4G / WiFi module (optional) for remote monitoring, analysis, and management. It comes with smart power management system which can recognize the power type automatically. Sleep mode leading the MDVR shutdown when the batteryâ??s voltage is lower the threshold value. Aluminum frame easy to heat dissipation, fanless to avoid dust from the outside. Built-in ultra-capacitor, avoid data loss and SD card damage caused by sudden outage. 8V to 36V power input wide voltage, special protection in automobile power system. Multi protection circuits like under-voltage, short, reversed plug-in. Hard disk heating is used to ensure disk storage in a low temperature environment. Smart power management system, shutdown under low voltage, low consumption. 4 I/O input available, record braking, reversing, turning, alarming, and more. 2 I/O output available, enabling telltale lamp, tell-tale signal, and remote control. 2.5-inch HDD or SSD slot, support 2TB maximum, SD card storage slot, support 256GB maximum. 1 UART serial port available and LED display, attendance machine, vehicle PTZ and more.
Electroplating wastewater include the pretreatment rinsing wastewater, plating rinsing wastewater. And the principal pollutants are heavy metal ion . 1.1 Up-to-standard discharge technology The emission of waste water which contains heavy metal ions such as Cr, Cu and Ni must meet the local requirements by adopting the means of Physical and Chemical Reaction + Sequencing Batch Precipitation + Ion Exchange + Compulsory Filtration to reach the standard. 1.2 Electroplating wastewater reuse technology Electroplating wastewater reuse technology means to add reclaimed water reuse system and reuse system on the basis of standardized discharge technology. The effluent can meet reclaimed water reuse standards(such as cleaning). 1.3 Electroplating wastewater zero-discharge technology MVR evaporator Working principle: MVR evaporator will increase the energy of secondary steam by using compressor, and will take advantage of the secondary steam with improved energy to recycle the potential heat of secondary steam. Specifically: Increase the pressure and temperature of the secondary steam generated by evaporator through the adiabatic compression in compressor, and after that, the steam will be fed into the heating chamber of evaporator (heat exchange system) as the heating steam, thus the potential heat of steam can be reused. The cold material will absorb the heat of non-condensable gas through preheating exchanger before being sent into evaporator, so the temperature of the cold material will increase, meanwhile, the condensate can be cooled by this material. This can further improve the utilization ratio of heat.
Rotary Air Blower Product Description The Rotary Air Blower utilizes an involute profile integral shaft ductile iron impeller design. The head plate, gear cover, end caps and rigid one-piece housing are made of gray cast iron. Carburized and ground alloy steel timing gear tapers are mounted on the shaft and secured with locknuts. Cylindrical roller bearings are used on the drive end and ball bearings on the gear end. The characteristics and advantages of rotary blowers 1. Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has high air volume, energy saving, and operates quietly) 2. The operation is smooth and the installation is very convenient (for small models, as long as they are placed properly, the vibration is minimal and there is no need to install anti vibration devices, making the installation very convenient). 3. Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume also changes very little with the pressure change). 4. Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation). 5. The material is excellent, the structure is clever, and the performance is excellent (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, and the performance is excellent, with few faults occurring during long-term use). 6. Simple maintenance, few malfunctions, and long service life (low speed, low wear, and long service life).
Model 4V222TIL Engine type 4 valve, 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 1200(883)/2,300 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 14.3 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 239 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 103 / 92 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,874 x 1,243 x 1,548 Engine dry weight (KG) 1,960
Model 4V222TIM Engine type 4 valve, 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 880(647)/2,100 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 14.3 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 160 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 103 / 92 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,874 x 1,243 x 1,548 Engine dry weight (KG) 1,920
Model 4L126TIL Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 545(401)/2,200 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 11.4 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 114 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 495(364)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.9 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 102 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 450(331)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.3 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 88 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536