Polyolefin shrink film.
Fluoro elastomer, perfluoro elastomer, fluoro silicone.
Product Description Tensile King PO785T is a new type of polymer modified material, which uses nanotechnology surface modification technology. It will carry out coating treatment for the ultrafine particles, at the same time it uses a special dispersion technology, making the ultrafine particles uniformly dispersed in resin, thereby to create some high-performance composite materials. The adding of master-batch can improve the toughness and brightness performance of the plastic products, which will realize the high-performance and low-costs for the related plastic products. The master-batch uses the natural materials such as inorganic powders, which will not only save the oil resources, but also could be recycled. Tensile King PO785T have good compatibility with HDPE,LDPE,LLDPE, and PP plastic, this product is featured with the acid and basic resistance, organic solvent resistance, and excellent electrical insulating properties, therefore it could be used as a substitute product for the polyolefin plastic. Product applications Tensile King PO785 is a high-grade modified plastic material, which is applicable to HDPE and LLDPE blown film, PP Injection molding, PP sheet materials, PP wire drawing and HDPE pipe, and so on. Tensile King PO785 is particularly applicable to the film materials, and it can reinforce the films rally. Product Features 1. The product costs: According to the forms of different products, this addictive can be added with more than 10 per cent, and therefore to reduce the product cost up to more than 5 per cent. 2. The mechanical property: the strength and toughness of the plastic products can be increased by adding this product. 3. The features of the finished products: the brightness of the finished products can be increased by adding this product, as for the film products, by adding this product, their transparencies will be increased, they will be featured with more smooth-touch, as well as the opening performance of the film products will also be increased. 4. The processing performance: its flowing property is very good, and has good compatibility with PE and PP resin. The ordinary equipments can be used, so that it has no necessary to change the related processing technology, and it has excellent processing performance, therefore the productivity will be improved. 5. An ideal additive: non-toxic, non-stimulation, good plasticizing, uniform particle size. Since the Tensile King PO785 have a good plasticizing performance and mobile performance, add Tensile King PO785 processing temperature can be reduced by 5 íµ -10 íµ, the typical adding ratio: 10% ~ 30%, and the ratio is adjustable according to the customersí» requirements. The following three steps will be passed when processing: [batching] í· [pre-mixing] í· [forming] 1. Batching: in accordance with the requirements of plastic parts, choose the batching ratio. 2. Pre-mixing: adding the weighed materials and suitable amount of colorants or master-batch into the mixer, to carry out the simple pre-mixing. 3. Forming: loading the well pre-mixed materials into the plastic jetting-molding machine or the hopper of the extruder, execute injection molding or extrusion.
Heat shrink tube kosso k-2(3x) Shrinkage ratio: 3:1 Flexible, high flame retardance Excellent physical, chemical and electrical properties Resistance to abrasion and fluids Operating temperature range Operating temperature range: -55p+G-ªG+GG¦fP+T-ª+GG¦ß~135p+G-ªG+GG¦fP+T-ª+GG¦ß Minimum shrink temperature: 70p+G-ªG+GG¦fP+T-ª+GG¦ß Minimum full recovery temperature: 110p+G-ªG+GG¦fP+T-ª+GG¦ß Packed in roll
Kosoo k-2 (z) heat shrink tube Features/benefits Shrinkage ratio: 2:1 Flexible, high flame retardance Low shrink temperature Good thermal stability Excellent physical, chemical and electrical properties Complied with en71 part 3, en1122, epa3050b, epa3052 european environmental standards Free of pcbs, pcps, pbbs, pbbos, pbbes, pbdes, which are classified as environmentally hazardous substances, conform to european rohs environmental standards Operating temperature range Operating temperature range: -55póGÇPµÆ~135póGÇPµÆ Minimum shrink temperature: 70póGÇPµÆ Minimum full recovery temperature: 110póGÇPµÆ Packed in rolls
Rubber, plastic & thermoplastic elastomer.Indenting agent service from india, china, singapore, Japan & USA
PTFE, PVC and polyurethane elastomer.
PU elastomer, polyurethane products.
Cosmetic, thermoplastic elastomer.
Thermoplastic polyurethane elastomer ( TPU ).
Yw-101 spray pure polyurea is a new solvent-free, pollution-free, environment friendly two-component waterproof coating. Component a is a quasi-prepolymer obtained from the reaction product of hydroxyl-terminated compound and isocyanate; component b is the mixture made up of amino-terminated polyether, amino-terminated chain extender, filler and additives. It features quick curing, suitable for corrosion-proof and seepage-proof works in sewage treatment plants and power plants, and waterproof for high-speed rails, subways, tunnels, culverts and other projects A:220kg/barrel b: 200kg/barrel
Introduction Performance and characteristic This product can form a rubber elastomer after cured. It has utmost strong water resistance, good ductility and cohesive property, and the advantages of heat resistance, cold-resistance, tensile, aging resistance, long service life, easy construction and can be constructed on the wet base. Use range It can be constructed directly on various wet or dry insulation courses and waterproof courses (i.e. Sbs, polyurethane) of the brick stone, mortar concrete and metal, and also can be used for various new and old buildings and structures (i.E. Roof, basement, external wall, toilet, tunnel, bridge and water tank).
KINGTOP timing belts deliver reliability and excellent dimensional stability., widely used in the machine of ceramic industry, textile industry and so on. Type: truly timing belt & opening timing belt. Model no.: XH, H, L, XL, AT5, T20, AT20, T10, AT10, T5, AT5, HTD 5M, HTD 8M, H, TT5. KINGTOP also can produce special timing belt according to customers drawing or sample, such as with red rubber , pvc, cleats , suppergrip coating.
Description:- It is a specially formulated polyurethane putty to be used as levelling coat on Metallic and Non Metallic Surfaces.It is easily applicable and has excellent filling properties, it does not crack on ageing & has good adhesion to various substrates like Tiles, Metals, Concrete, Plastics etc. It Provides an excellent base for further painting. TECHNICAL SPECIFICATIONS:- Supplied as: Bodyfill A + Bodyfill B. Mixing Proportions: 10 : 1 P.B.W. Application: Putty Knife. Pot Life: 60 Minutes. Drying Time: Touch Dry : 1 û 2 Hours. Hard Dry: 6 û 8 Hours. Colour: Off white/Pink/Grey. Shelf Life: 6 Months. Specific Gravity:- 1.4 +/- 0.1
Product Description:- Two pack polyurethane based Acid resistant Mastic. Properties:- Highly chemical resistant Mastic, resists dilute Sulfuric acid, Nitric acid , Hydrochloric acid, functions at elevated temperature upto 90¦C in most aggressive acqueous media. High Tensile Strength, Abrasion Resistance, excellent hydrolytic stability elastomer in nature with compression and extension capabilities, forming strong durable bonds with most substrates. The cured materials allow for thermal expansion and contraction whilst also dampening vibration thus preventing the loosening of joints making it an ideal materials for filling between panels of any material. Antacid has excellent low temperature flexibility ideal for cold storage and other below zero Celsius application. Supplied as:- Antacid A , Antacid B. Uses:- Sealant, Caulk, Coating, Lining. TECHNICAL SPECIFICATIONS:- Mixing Proportions: 1 : 1 pbv. Pot Life: 15 minutes at 30¦C.8 minutes at 55¦C. Colour: Black. Volume Solids: 100% Application: Pour, Putty knife, Caulking gun. Shelf Life: Unopened containers 6 months.
Description:- Eurobond is an crosslinking agent for use in rubber based adhesive. The product improves the resistance of the bond to heat, fats,oils plasticisers and various organic solvents:The product improves the adhesion of rubber, to many surfaces difficult to bond. Specification:- 20% Solution of di, tri and polyisocyantes in Methylene Chloride. Colour:- Clear, Yellow to brownish liquid NCO %:- 7.0% Specific Gravity:- 1.3 Viscosity:- 3m.pas Storage Stability:- Highly sensitive to moisture. Keep containers tightly closed after withdrawal of materials.
Description:- Pale Yellow to light yellow clear transparent liquid. Usage:- As Diluent, Thinner for Enamel Paints, Chlorinated Rubber Paints, Epoxy Paints, Polyurethane Paints, Lacquers varnishes, Inks. Dissolves for Resins etc.
Styrene based thermoplastic elastomers (TPES).
Silicone, EPDM, NBR, NR rubber parts, EPDM, NBR, NR, HNBR, FKM.Manufacturing
'o' ring, washer, diaphragm, rubber gasket, bellow .Manufacturing