Prisms: Right angle prism, Dove prism, Beam splitter, Penta Prism, Corner prism, Trapezium Prism, Rhomoboid Prism, Roof  Prism, Cube prism, customized prisms, etc. Description Of Light Guide Prism. Specifications Of Light Guide Prism Flatness 2/10 Surface Quality 80/50-10/5 Angle Tolerance 3-15 Clear Aperture >85%-95% Chamfer 0.3mm 45°-0.1mm 45° Coating As per customers requirement As a light guide manufacturer, we provide light guide rod, guide rod light, custom light guides, etc. For more information, please feel free to contact us! If you are looking for a reliable custom lens manufacturer, don't hesitate to contact us!
Stdfsm 3666 digital fiber spectrometer Detector: toshiba tcd1304 ap linear ccd array Detector wavelength response range: 200nm-1100nm (200nm-850nm or 350nm-1100nm) Pixels: 3648 Pixel size: 8um*200um Pixel well depth: 105 number electrons Snr: 300:1 (full signal) A/d resolution: 12 bit Dark noise: 50 rms counts Corrected linearity: 99.8% Sensitivity (photon/count): 400nm:130, 600nm:60 Optical system: f/4, asymmetrical crossed czerny-turner Focal length: 45mm (input), 70mm (output) Entrance aperture: 5um, 10um, 15um, 20um, 50um width slits or fiber (customizable) Grating: various kinds of scoring grating or holographic grating with different grating constants and flare wavelengths (customizable) Cylindrical lens: optional Optical filter: band pass or long pass filters to eliminate secondary spectrum Fiber and fiber connection: na 0.22, sma 905 (customizable) Wavelength range: depend on optical grating Optical resolution: 0.2nm-10nm fwhm (depend on grating constant, width of slit and detector model) Wavelength tolerance: about 0.2mm Integration time: 10us-64s Dynamic range: 2.0*108 (system), 1300:1 (single acquisition) Stray light: < 0.05% at 550nm Power consumption: 250ma*5 vdc Data transfer speed: full spectrum into memory every 5ms at usb 2.0 (16ms at usb 1.1) Standard
Penta Angle Prism are widely used in laser level, Image system, precision system, and optical area. For penta prism, the deviation angle of 90 is independent of the orientation of the prism, thus it is particularly important and wide in application which the prism orientation cannot be precisely controlled, we can produce high precision penta angle prism,and make coating according to customer's request.
Sunday Optics provides many kinds of roof prisms including Schmidt Roof Prism Lehmann Roof Prism Abbe Roof Prism Penta Roof Prism and Combined Roof Prism, etc. Lehamann Prism Material: Optical glass, H-K9L, Quartz Size:5-300mm Angle Tolerance:3' Size Tolerance:+/-0.05mm Coating: AR BBAR Metal
Properties 1. Excellent transparency, outstanding resistance to aging. 2. It has good insulating properties and mechanical strength; to acid, alkali, salt has a strong resistance to corrosion; and because easy processing. Applications 1.Extruded sheets for signage, displays and building material 2.Motive parts such as tail lamps, meter covers and sun visors 3.General sundries such as tableware, kitchenware, giftware and bathroom accessories 4.Optical lenses such as sunglasses, reading glasses and camera lenses 5.Light guide panels for LCD displays 6.Other applications such as mobile phone display panels, clock covers, lighting covers/accessories, optical fibres, toys, etc.
Porro Prism A refracting optical prism used in optical instruments to modify image orientation, In use, the light enters through the largest rectangular plane in the prism, passes through two total reflections of the inclined plane, and then penetrates the original plane of incidence, Because the light comes in and out normally, the prism does not disperse. But the image that passes through Porro prism will be flipped 180 degrees, and it will travel in the direction it entered, which means it will travel 180 degrees. Porro Prism Material BK7, UV Fused Silica, Sapphire, ZnSe,Caf2,Si,Ge,etc. Size 3mm-300mm Size tolerance 0.00/-0.05mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10 1/4lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Corner Cube Retroreflectors Corner Cube Prism is also called Retroreflector or Trihedral Prism. In the Corner Cube Prism, three reflecting surfaces are perpendicular to each other, like the side wall of the cube. The input surface is perpendicular to the cube diagonal. Disregarding the angle of incidence, the output beam is parallel to the input one, but it is of opposite direction. Inset of the several corner prisms, for better matching, their entrance-exit surface is often hexagonal. In case of this prism the phenomenon of full internal reflection occurs so it is not necessary, (however it is possible) to put mirror coating on the reflecting faces. Normally the reflection surfaces are Al reflection coating, and then covered with Cu and Black Painting. Specifications: Material: BK7 Glass Dimension Tolerance (mm): 0.2 (General), 0.1 (High Precision) Deviation: 180 3 arc secs Flatness (per 25mm 633nm): 2(General), 10 (High Precision) Clear Aperture: 80% (small size),90%(large size) Surface Quality: 60/40 (General), 10/5 (High Precision) Bevel (mm): 0.1-0.5 Coating on input and output sides: Note for corner cube retroreflector: (1). Besides N-BK7, custom-made corner cube Prisms made of other optical materials are available. (2). Corner Cube Prisms with lower deviation tolerance, such as 1, 30, or 10, are available. (3). Corner Cube Prisms with better surface Quality (better than 40/20 or 20/10) are available. (4). HR or Metal reflection coating(Al, Ag, Cu, etc.) on reflection surfaces is available. (5). AR coating on input/output surface is available upon request. (6).Custom-made non-standard Corner Cube Prisms at any other size are available upon request.
Magnifying Glasses (standard)
Fuel LPG. Fuel Tank Capacity 2.0 L Fuel Consumption : App. 225 g P/H Length : 350 mm Height : 330 mm Width : 150 mm Weight(kg) Empty : 1.5 Kg (Empty)
Optical machinery & equipment.
Wedge prism has plane inclined surfaces. It deflects light toward its thicker portion. It can be used individually to deflect a beam to a special angle. Two wedge prisms work together can assembly an anamorphic prism to correct the elliptical shape of laser beam. The wedge prism is ideal for laser beam steering applications. By combining two wedge prisms which can be rotate individually, we can direct the input beam to anywhere within the cone angle �¸d, where �¸d is 4x the specified angular deviation of one wedge Wedge Prism Specifications Material BK7, UV Fused Silica, or customer request. Size 1mm-600mm Size tolerance +/-0.02mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10lambda at 632.80nm Chamfer 0.25mmx45 Wedge Angle tolerance
Digital imaging sensors, industrial & scientific camera lenses, custom optics, illumination systems.Consulting electrical, electronics, and optical engineers
Cylindrical lens, achromatic doublet lens, spherical lens, windows, prisms, mirrors, filters and wedges from flint glass, uv-grade fused silica, infrared fused silica, caf2, ge, si, znse, sapphire.
Optical, optical lens, optical laboratory.
Optical lenses, prism, optical window, filter, mirror and optical kits.
Optical lens includes balsaming lens, cylindrical mirror, spherical mirror, prism, plane mirror, mirror, filter, polarizers, wave plates and other products.
Optical display solutions .Manufacturer
Optical parts like lens, prism, filter.
Optical instruments.Inspections and shipping
Optical equipment.
