Occ 95\5 Waste Paper Suppliers and Manufacturers

The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -

Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper

Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper

Moisture: 15% max. 95% pineapple, 5% sugar. No addtives & preservatives. Taste: soft, sour and sweet. Origin: Vietnam. Drying process: Air Drying. Shelf life: 12 months. Min order: 1000kgs. Quantity capacity: 50 tons/month. Packaging: in 10kgs carton, 1x20ft = 6mts, label as buyerâ??s requirement.

Very high quality N-95 mask available 5 layer with two layer of Melt-blown mask. All certificate available

1. Product Functions and Features Sodium Selenite is a supplement of selenite for animal nutrition. The product has stable quality and good liquidity and is easy to mix process. 2.  Introduction Mixed feed additives and sodium selenite. The additive of microelement selenite in feed. Usage & Dosage:The recommended amount in the compound feed(calculated by Selenite mg/kg)0.1-0.3mg for livestock,0.1-0.3mg for fishes. 3. Appearance Light Grey Powder 4. Product quality standard 1%selenite 5%  selenite Sodium selenite (counted by Se)% 1 ±0.05 5 ±0.10 Moisture % 5 Pass 450 m test sieve% 95 Total arsenic content (counted by As)% 0.0005 Lead content (counted by Pb)% 0.002 Cadmium content (counted by Cd)% 0.001 5.Packing:25kg/bag 6. Storage conditions, methods and precautions: stored in cool and dry places, and used up as soon as possible once unpacked.

We can supply kinds of sodium chloride (salt). Please first check the following information. Molecular formula: NaCl Molecule Weight: 58.44 H.S code:250100 CAS: 7647-14-5 Purity: 85% - 99.5% Granular Particle size :from 0.15 mm to 5 cm Usage: for dye , alkali ,textile ,drilling oil , water treatment ,melting snow/de-icing , food , pharmaceutical and so on Packing 250gram,500gram,750gram,1KG, 2LB,3LB, 4LB, 10LB PE&PET complex plastic bags or bottle in cartons, 20kg,25kg, 50kg ,1000kg,1200kg,1250kg plastic woven bags and kraft paper bag with PE inside.

Commodity: Sodium Metabisulphite Molecular formula:Na2S2O5 Molecule Weight:190.10 H.S code:28321000 CAS:7681-57-4 Product Features Appearance : White Or Light Yellow Crystal Powder Odour: Sulfur Dioxide Taste : Salty Melting Poing : 150 Specific Density1.48 Ph : 4.0-4.6 Solubility : Soluble In Water ,insoluble In Alcohol Application: 1. For industry Mordant of printing and dyeing; Dechlorinate of textile after bleaching; Sulphonated agent and reducer of chemical industry and pharmacy; Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ; The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment. 2.For food additive Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc) Specifications: Na2S2O5 97% min SO2 65% min Fe 0.0015% max water-Insoluble 0.01% max As 0.0001% max PH 4.0-4.6 Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months

Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12

Trichloroisocyanuric acid (TCCA) 90% Min intro: 1. Molecular formula: C3N3O3C13 Molecular Weight: 232.44 CAS: 87-90-1 HS NO:29336922 UN NO:2468 2. Structural formula: 3. Uses: 1) water treatment: it can be used to disinfect drink water and water in swimming pool, algae-removing in circulating water. 2) Disinfection: It can be used in disinfecting dinner, food, and dishes, or used in the prophylactic disinfection of home, hotel and public place; hygiene and disease control of hospital; or used in the disinfection of silk worm, animals, birds and fish 3) Other: It can be used in anti-shrinkage finishing of wool, textile bleaching, antimoth of paper and chlorinated agent of rubber. 4. Technical Index: Appearance: white powder/granular Available chlorine: 90%Min PH (1% Aq. Solution): 2.7-3.3 Moisture: 0.5% Max Granular Size: 8-30mesh or 20-60mesh Package: 25kg/50kg plastic drum, 50kg fiber drum. 5. Product: According to the requirements of production from customers.

1,Name: Sodium nitrite Molecular formula: NaNO2 Formula weght:69.00 2Property: (1) ordinary sodium nitrite: white little crystals or light yellow  (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status. Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures. 3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc. Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten. 4 Specification: (Technical Standards:GB2367-2006) Item Unit Molten salt G High G First G Qualified G Dry powder G Assay % 99.3 99.0 98.5 98.0 98.5 Sodium nitrate % 0.6 0.80 1.00 1.90 0.80 Chlorides % 0.03 0.10 0.17 -- 0.1 Water insolubles % 0.02 0.05 0.06 0.10 0.06 Moisture % 1.0 1.4 2.0 2.5 0.2 Loose degree -- -- -- -- 95 5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.

1.Name: Sodium nitrate Chemical formula: NaNO3 Formula weght:84.99 2.Property: (1) ordinary sodium nitrate: white little crystals or light yellow (2) dry powder sodium nitrate: non-caking, showing loose status. Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc. 3. Usage:  it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc. 4. Specification: (Technical Standards:GB/T4553-2002) Item Unit High G. First G. Qualified G. Dry powder G. Assay % 99.7 99.3 98.5 99.3 Sodium nitrite % 0.01 0.02 0.15 0.02 Chlorides % 0.25 0.30 -- 0.25 Water insolubles % 0.03 0.06 -- 0.03 Moisture % 1.0 1.5 2.00 0.2 Carbonates % 0.05 0.10 -- 0.1 Iron % 0.005 -- -- 0.005 Loose degree -- -- -- 95 5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.