CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Its maximize product capacity can reach 1000pcs/h. 1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally. 2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. 3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine. 4. The machine can be operated in the step-by-step mode and the semi-auto mode. 5. The machine is small with low investment, easy and safe to operate. Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available. - Key Specifications/Special Features: * Heat-resistant bottle blow-molding machine * Suitable for producing PET plastic containers and bottles from 10-2,000ml * Used to produce carbonated bottle, mineral water pesticide bottle, oil bottle cosmetics wide mouth bottle and hot fill bottle * Adopts double crank to adjust mold, heavy locking mold, stable and fast * Adopts infrared oven to heat perform, perform rotated and heated equally * Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow * Can provide sufficient and steady high pressure for blowing large irregular shaped bottles * Equipped with muffler and oiling system to lubricate mechanical part of machine * Can be operated in step-by-step mode and semi-auto mode * Small with low investment, easy and safe to operate * Can produce PET bottles which can resist high temperature, such like 92 deg. C * For traditional juice and other liquid food packing * Container: o Material: PET, PP and PE o Volume: 0.1-2L o Theoretical output: 600 to 800 pieces/H o Preform length: 15 to 350mm o Preform inner diameter: ? 5 to 38mm * Molding: o Maximum mold plate dimension (L x W): 350 x 380mm o Maximum mold thickness: 180mm o Clamping force: 45kN o Mold opening stroke: 16mm * Machine size and weight: o Main machine (L x W x H): 160 x 60 x 161cm o Main machine weight: 500kg o Heater (L x W x H): 187 x 63 x 145cm o Heater weight: 250kg * Power: 24.8kW Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water, beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
Injection moulding machine.
Injection moulding machines.
Injection moulding machine .
Spare parts of injection molding machines.Export import
Precision mold, precision part, plastic part, injection molding.
Ppe hdpe products manufactured by us through injection blow moulding machines.
Injection Molding Machine..
Rubber injection moulding machine.
We can ensure customer: 1. Quickly response and complete understanding 2. The most competitive and reasonable price 3. Short delivery time 4. High quality. Primary Competitive Advantages : . Well and High Quality Control . Prompt Delivery . Customer's Designs and Logos are Welcome . Competitive Prices . In a Variety of Designs . Small Order Acceptable . OEM Accepted.
Cm-9a stretch blow-moulding machine is an economical machine for blowing various pet bottles of max. Volume up to 5l. This set of machines uses rotary infrared oven for preheating with high production capacity. Features of cm-9a are automatic control, high output, working safety, simple structure, convenient in operation and less power needed. It is an ideal equipment to make mineral water bottle, shampoo bottle, washing bottle, edible oil bottle, wine bottle, pharmacy container, milk bottle and other daily usage bottles and containers from 50ml to 20l with different shape and neck diameter Specifications: Bottle volume: 0.1l to 5lmax. Production capacity: 500 to 750 bph ( 0.1l to 2l) 150 to 180 bph (2l to 5l)mould-clamping pressure: 10kgmax. Size of mould: 300mmmax. Mould opening stroke: 280mmmax. Mouth diameter of bottle preform: 120mmmax. Length of bottle preform: 250mmmax. Heating speed of preform: 1800pcs/h Wooden cases
Pet bottle blow moulding machine to make mineral water bottle, shampoo bottle, washing bottle, edible oil bottle, wine bottle, pharmacy container, milk bottle and other daily usage bottles and containers from 50ml to 20l with different shape and neck diameter: Isemi-automatic blow molding machines: 1cm-9a stretch blow molding machine for pet bottle from 0.1l to 5l 2cm-9b stretch blow molding machine for pet bottle from 5l to 10l 3kintl-5g stretch blow molding machine for pet bottle up to 5 gallon Iiautomatic blow molding machines: 1cm-a2b automatic blow molding machine with single cavity moulds for pet bottle up to 5l 2cm-a2 automatic blow molding machine with 2 cavities moulds for pet bottle up to 2l 3cm-a4 automatic blow molding machine with 4 cavities moulds for pet bottle up to 2l 4cm-a6 automatic blow molding machine with 6 cavities moulds for pet bottle up to 2l Iiiautomatic rotary blow molding machines: 1cm-g4 automatic rotary blow molding machine with 4 cavities moulds for pet bottle up to 2l 2cm-g6 automatic blow molding machine with 6 cavities moulds for pet bottle up to 2l We also supply following products: 1various moulds for preforms and bottles 2bottling lines 3preforms and caps 4injection molding machine to make preforms and caps
Cm-a4 automatic pet bottle blow molding machine ooling water: 150l Min size ( lxwxh): 1908x1858x1920mm Weight: 3600kg Auxiliary equipment : preform unscrambler is equipped as standard
Using PET material, KINTL-5G could blow extra-large bottles of 5 gallon volume. Those bottles are mainly used to contain pure drinking water for office and family uses. As the market of pure drinking water is expanding rapidly those years, the inquiry of extra-large bottles is also keeping on increasing. Our KINTL-5G is designed to produce high quality water drums at very competitive prices. It uses high quality electrical and pneumatic parts imported from Germany and Japan to ensure stable and effective work. The complete production line for making 5 Gallon PET bottle manufactured by our factory includes: 1.)Main blow molding machine 1 unit 2.)Preform Preheater 1 unit 3.)Voltage stabilizer ( 50KW) 1 set 4.)Chilling type air dryer(with built in rear/front filter) 1 set 5.)Low pressure air compressor 12.5Kg/0.8M3 1 set 6.)High pressure air compressor 30Kg/0.7M3 1 set 7.)Blow mould for 5 Gallon bottle 1 cavity 1 unit Product Feature MAIN BLOWING MACHINE SIEMENS PLC controller. FESTO hydraulic elements, valves and pipes. MISHUBICH VVVF motor. The mould clamping system design is adopted by the advanced toggled lock design producing strong clamping force. The mould thickness can be adjusted by gear-turned belt automatically. On the blowing base of machine, an automatic moving device is assembled. PREHEATER The preheater is an infrared heater. When the preforms being heated in the infrared heater by circulation movement, they can also be rotating independently. Inside the preheater, there are 22 holding heads for the preforms and 12 infrared pipes providing 12 zones of different heating temperature. It ensures accurate temperature at each zone pipe without fluetuation, guarantee high percentage of perfect end products Product specification / models Total power of the whole system in kw. 22.5kw Total power consumed by pet blowing machine in kw. 3 Power consumed by the preheater in kw. 7.2kw/220v Total power consumed by the two air compressors (high pressure and low pressure). 7.5kwx2 Production capacity 400bph for 5l bottle 90bph for 5 gallon bottle
Dongguan Shengwei Plastic Products Co.,Ltd is a private high-tech enterprises, which is a set of plastic mould design and manufacture, injection molding, assembly, products R&D and sales as one. The company is located in Humen Town, Dongguan, China, where enjoys the convenient transportation conditions and advanced manufacturing bases. Shengwei was established in 2003. After more than ten years of development, it has grown into a complete supporting large-scale factory. the factory has adopted full-automatic dust-free workshop, advanced and complete manufacturing facilities, has strong technical force. Occupy area 12,000 square meters, more than 200 employees, 90% of them has experience over 10 years. Shengwei has advanced equipment for making mold, plastic injection molding, automatic dust-free spraying workshop, as well as advanced measuring testing equipment laboratory. Shengwei has various levels CNC processing centers, EDM machines, Sodick low speed wire cutting, deep hole drilling machine, milling machines, lathes, grinders, CMM etc. From 35 tons to 1000 tons, there are more than 30 high precision single-color, double-color and special injection moulding machines.
Injection Moulding Machines And Spare Parts.
Liquid silicone injection moulding machine.
With background of 20+year experience on extrusion technology for plastic products. our top technology on pvc o pipe extrusion line and cpvc pipe extruder will lead the plastic pipe extrusion to a new level. main of our products: 1. plastic pipe extrusion line. 2. top oriented pvc pipe machine, pvc o extrusion line, opvc pipe extrusion machine. 3. top technology cpvc pipe extrusion line. 4. plastic pipe extrusion mould/die head, extrusion tooling . 5. plastic pipe belling machine, plastic pipe socket machine. 6. plastic pipe threading machine. 7. plastic granulator machine, plastic pelletizing line. 8. plastic pipe grooving/slotting/drilling machine, etc..
Moulding machines, blow moulding machines, fully automatic pet blow moulding machine, semi automatic pet blow moulding machines, extrusion machines, extrusion plants, plastic extrusion machinery.