Hydrocarbon Suppliers and Manufacturers

Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.

Liquified Petroleum Gas also referred to as Liquid petroleum gas (LPG or LP gas) is a fuel gas which contains a flammable mixture of hydrocarbon gases, specifically propane, propylene, butylene, isobutane, and n-butane. LPG is a versatile and clean-burning fuel used for a variety of purposes such as; heating appliances, cooking equipment, and vehivles for transportation. With its high energy content and low carbon emissions, LPG has become an increasingly popular choice for businesses and individuals around the world.

Toluene is also known as toluol. It is a colorless clear aromatic hydrocarbon with the formula C7H8, it is also referred to by the name methyl benzene. Toluene occurs naturally at low levels in crude oil and is a byproduct in the production of gasoline by a catalytic reformer or ethylene cracker. It is also a byproduct of the production of coke from coal. Toluene is used across several industries for various applications. It is predominantly used as an appreciable solvent. Application: As a solvent, toluene can be used in paints, paint thinners, adhesives, inks, resins, cleaning agents, leather tanners and inks. It can also be used to manufacture polymers that produce nylon, plastic soda bottles and for pharmaceuticals, dyes and cosmetic products. Toluene is also used as a coolant in sodium cold traps underneath nuclear reactor loops. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Purity (GC): 99.9 % Identity (IR): conforms Evaporation residue: 2.0 mg/l Water: 0.05 % Acidity: 0.0002 meq/g Alkalinity: 0.0006 meq/g Transmission (at 300nm): 70 % Transmission (at 310nm): 80 % Transmission (from 350nm): 98 %

Jet fuel is designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification. Jet fuel is a mixture of a large number of different hydrocarbons. The range of their sizes is restricted by the requirements for the product, for example, the freezing point or smoke point. Kerosene-type jet fuel has a carbon number distribution between about 8 and 16 carbon numbers (carbon atoms per molecule); wide-cut or naphtha-type jet fuel (including Jet B), between about 5 and 15 carbon number. Jet A-1 is the standard specification fuel used in the rest of the world. Jet A-1 has a flash point higher than 38 C (100 F), with an autoignition temperature of 210 C (410 F).

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation

PE (Polyethylene) Expansion Joint Filler Board is a pre-moulded, high performance joint filler board. It has a closed cell and cross linked structure. It has an excellent recovery of 95% (after compression upto 50% of original thickness), which makes it the most suitable product for the said usage. It is an exclusive product specially designed to be used as expansion joint filler in concrete, brick, block work and isolation joints. It is also rot free and has no bitumen. What are the features and advantages of filler board? Resilient â?? Our EJF boards delivers 95% compression recovery after deflection (compression), that it is the most important and excellent attribute for any expansion joint filler boards. Weathering Effect â?? Joint filler board is resilient and additionally absolutely does not distort under less load transfer from wet concrete. Closed cellular composition â?? Very low water absorption consequently non deteriorating and also resilient Bitumen free â?? Non-staining and easy to apply. Chemically Resistant â?? to almost all types of acids, alkalies and hydrocarbon group materials. Simple â?? Easy to handle, carry, load/unload, install. Load absorption is higher and transfers to the structures very little. What is the use of filler board? Expansion joints at airport runways and taxi tracks The next usage are in mall parking lots as well as structures Furthermore these are applied to Isolation Joints to infill sections In addition to water-proofing also used in concrete flooring. Water retaining as well as water eliminating structures Inter-connecting pathways between buildings Basements, flyovers as well as subways. These kind of boards used in concrete roads as well as toll plaza flooring. Bridges, verandas, abutments and pier hinge joints For more details please visit: https://www.kampun.com/expansion-joint-filler-boards-kampun-hd100-board/

Purity 99% Physical State Liquid Grade Standard Industrial Grade Packaging Size 200 ml Packaging Type Bottle Color Water White Usage/Application Cosmetics We are offering our clients, accurately composed mineral turpentine oil. The oil consists of volatile fraction derived from petroleum. The main composition of the oil is paraffin, naphthenic and aromatic hydrocarbons in different propositions. Clear and water- white in color, our range of mineral turpentine oil is also used to be dissolved resins, rubber, bitumen and also to reduce the viscosity of the solutions produced.

Packaging Size 50 LTR,200 LTR Packaging Type Barrel Usage/Application Industrial Color Water White Product Type Turpentine Oil Tops We are offering our clients, accurately composed mineral turpentine oil. The oil consists of volatile fraction derived from petroleum. The main composition of the oil is paraffin, naphthenic and aromatic hydrocarbons in different propositions. Clear and water- white in color, our range of mineral turpentine oil is also used to be dissolved resins, rubber, bitumen and also to reduce the viscosity of the solutions produced.

Polyethylene glycol is a kind of high polymer, the chemical formula is HO(CH2CH2O) NH, non-irritating, slightly bitter taste, with good water solubility, and many organic components have good compatibility.It has excellent lubricity, moisture retention,dispersion and adhesion Polyethylene glycol series PEG200 PEG400 PEG600 PEG800 Product performance: This series product non-toxic, without excitant, soluble in water ethanol and a variety of organic solvents, insoluble in most of the fatty hydrocarbon and ethyl ether .in accordance with different relative molecular mass and different nature. With the increase of molecular weight of the moisture absorption ability, and the corresponding lower solubility, and the frizzing point, relative density, flash point and viscosity increase.

Virgin Oil D6, also known as residual fuel oil, is a petroleum product that is obtained from the refining process. It has a high density and a high viscosity, making it a suitable heavy fuel oil used in large marine engines and power plants that require high levels of energy. Virgin Oil D6 is produced from the residue left over after the lighter hydrocarbons, such as gasoline and diesel fuel, are removed from crude oil. It is a heavy, black viscous liquid that is resistant to flow. The product has a high sulfur content, typically between 2.5% and 4%, and a calorific value of approximately 38 MJ/kg.

BASE OIL SN 100-150-300-500-600-700 Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds. Base oils chemical properties and their impact on the usage of final lubricant: 1 volatility: reduction of the oil, oil thickening, sediments 2 surface activity: foaming, pressure tolerance, air release, emulsion expansion 3 oxidations: sediments, oil thickening, metal oxidation, mud forming 4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling 5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;

Methanol Technical Data Sheet Property Specification Analytical Test Methanol Purity WT % 99.85 min IMPCA 001-21 Water W/W% 0.100 Max ASTM E91064 Ethanol W/W% 0.0050 Max IMPCA 001-21 Specific Gravity 20/20,C 0.7928 Max. ASTM D-4052 Acetone, W/W% 0.0030 Max. IMPCA 001-21 Permanganate Time Test @ 15 C, Minutes 60 Min. ASTM D-1363 Non Volatile Matter, mg/1000 ml 8 Max. ASTM D-1353 Distillation Range @ 760mm Hg C 1.0 Max., ASTM D-1078 Color Pt-Co, APHA 5 Max. ASTM D-1209 Carbonizable APHA 30 Max ASTM E-346 Total Iron, mg/kg 0.10 Max ASTM E-394 Chloride as CI, mg/kg 0.5 Max ASTM D-512 Appearance Clear and free from suspended matter IMPCA 003-98 Acidity as CH3COOH, W/W% 0.0030 Max, ASTM D-1613 Hydrocarbons Pass Test ASTM D-1722 Sulphur mg/kg 0.5Max, ASTM D-5623 Aromatics, UV Test Passes Test IMPCA 004-15

Light Crude Oil: Crude oil is a naturally occurring, unrefined petroleum product composed of hydrocarbon deposits and other Organic materials. Distillates Include Naphtha, Light Kerosene and Heavy Kerosene, Gas Oil, MTO and Fuel Oil. Parameter Method Unit Result Appearance - Black Density :150C ASTM D-1298 Kg/L 0.830 Flash Point : ASTM D-93 OC 0 Water Content : ASTM D-95 %vol 0.5 Distillation : ASTM D-86 IBP ASTM D-86 OC 45 10% ASTM D-86 OC 75 20% ASTM D-86 OC 95 30% ASTM D-86 OC 125 40% ASTM D-86 OC 155 50% ASTM D-86 OC 170 60% ASTM D-86 OC 230 70% ASTM D-86 OC 300 75% ASTM D-86 OC 320 Remark: Cracked at 320OC. Total Recovery 75%, Residue 25%

Bis(2-hydroxypropyl) Ether is commonly used as a plasticizer, an intermediate in industrial chemical reactions. Properties: Dipropylene glycol is a kind of high purity product, suitable for flavor, cosmetics and other applications sensitive to odor. It is an odorless, colorless, water-soluble and hygroscopic liquid. Dipropylene glycol has a low vapor pressure and a moderate viscosity. Application Used in the manufacture of polyester resin. It is used as the solvent of cellulose acetate, cellulose nitrate, shellac varnish, castor oil, the component of fiber lubricant, and the preparation of plasticizer, fumigant, synthetic detergent, etc. In addition, dipropylene glycol can be used alone or in combination with diethylene glycol to extract aromatic hydrocarbons from hydrocarbons. (1) Chemical synthesis: Dipropylene glycol is often used to synthesize other chemicals, such as polyethers, polyesters, etc. (2) Solvent: Since dipropylene glycol has good water solubility, it can be used as a solvent to dissolve or dilute other substances. (3) Spices and condiments: Dipropylene glycol can be used as a food additive to increase the taste and flavor of food. (4) Cosmetics: Dipropylene glycol can be used as a moisturizer in cosmetics to improve the moisturizing effect of cosmetics. (5) Pharmaceuticals: Dipropylene glycol can be used in the pharmaceutical field as a carrier or auxiliary for drugs. Usage 1) Dipropylene glycol is the most ideal solvent for many fragrance and cosmetic applications. This raw material has good water, oil and hydrocarbon co-solubility and mild odor, little skin irritation, low toxicity, uniform distribution of isomers, excellent quality. 2) Dipropylene glycol can also be used as a coupling agent and moisturizer in a variety of different beauty cosmetic applications. In the field of perfume, the proportion of dipropylene glycol is more than 50%; In some other applications, the proportion of dipropylene glycol is generally less than 10% (by weight). Some of the specific product application areas include: curling lotions, skin cleans (cold creams, body washes, body washes, and skin lotions) deodorants, face, hand, and body skin care products, moisturizing skin care products, and lip balms, among others. 3) Dipropylene glycol can also play a role in unsaturated resins and saturated resins. It produces resins with superior softness. Crack resistance and weather resistance. The long-term yellowing resistance of the product is the value.

Wholesale Light cycle oil Light Cycle Oil (LCO) is a secondary liquid product derived from the fluid catalytic cracking (FCC) process in refineries. This process breaks down larger hydrocarbon molecules from heavy gas oils into smaller, more valuable products like gasoline and diesel. LCO typically sits between diesel and heavy gas oil in terms of boiling range and weight. Primary Characteristics: Appearance: Typically amber to dark brown liquid. Odor: Characteristic petroleum smell. Density: Intermediate, falling between lighter distillates and heavier oils. Sulfur Content: Can vary based on the feedstock and refining process, but often higher than diesel and gasoline. Applications: Blending Component: Frequently blended into diesel fuel to enhance volume, though this requires treating to meet emissions standards.

Liquefied petroleum gas or liquid petroleum gas (LPG or LP gas), also referred to as simply propane or butane, are flammable mixtures of hydrocarbon gases used as fuel in heating appliances, cooking equipment, and vehicles. It is widely used alternative fuel. It has substantial reserves due to its dual origins from natural gas processing and crude oil refining. Liquefied Petrol Gas (LPG) powered passenger cars have about 10% lower tailpipe CO2 emission than comparable gasoline powered cars. When compared to a diesel car, there is no significant CO2 emission reduction per km driven; however, LPG powered vehicles do have substantially lower NOx emissions than diesel powered vehicles.