Voltage class kv: 69, 115 & 135 -easier construction thanks to the light weight - excellent impact resistance Excellent mechanical properties - the characteristics to repel water of polymer material
Basic weight (g/m²) = 220 ± 10% Tensile strength (astm d 828) knm = md: 14 - 16; xd: 10 – 12 Corrosion or delamination (95% rh @ 50°c, 30 days) = none Permeabilty/wvtr = (astm e96-80), g/h/m²) = max 0.01 Water resistance = no delamination Vapor resistance = excellent Tear resistance = good - using 99% pure aluminum foil with high reflectivity & low emissivity surface is the most effective radiant barrier. - reinforced with special fiberglass scrim for higher mechanical product strength. - special bonding layer combined with aluminum foil giving it superior vapor barrier & fire retardant properties. - resistance to moisture, mold and fungi. - no change of performances over time due to compaction, disintegration or moisture absorption. - light weight but high tensile strength with special fiberglass scrim reinforced - installation friendly & durability. - no crumbling material / non-itchy - eco friendly. - characteristics of this product is not easily change & is stable & will not delaminated when exposed to high temperature/high humidity of tropical climate. Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Basic weight (g/m²) = 220 ± 10% Tensile strength (astm d 828) knm = md: 14 - 16; xd: 10 – 12 Corrosion or delamination (95% rh @ 50°c, 30 days) = none Vapor resistance = excellent Tear resistance = good Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Thickness: 20mm Density: 52 kg/m3 ¡¨¤ 3% Panel diameter: 4000mm x 1200mm Thermal conductivity: 0.020 -0.21w/mk Aluminum foil: 80 |¨¬m both sides Aluminum finish: embossed Fire and smoke classification: non-combustible class ¡¡ãa¡¡à Carton
Thickness: 20mm Density: 52 kg/m3 ¡¨¤ 3% Panel diameter: 4000mm x 1200mm Thermal conductivity: 0.020 -0.21w/mk Aluminum foil: 80 |¨¬m both sides Aluminum finish: embossed Fire and smoke classification: non-combustible class ¡¡ãa¡¡à Carton
1. Type:Post type insulator. 2. Model Number: ZNQ6 post insulator. 3. Material:epoxy resin. 4. According to IEC GB. Carton box.
Long rod composite insulators are mainly used in high voltage overhead power transmission & distribution lines for insulation and mechanical connection. Normal operation conditions: 1 Ambient temperature: -50c-+50c 2 Altitude: not more than 3000m 3 Frequency: not more than 100hz.
F-grade DMD (6641) polyester film polyester fiber non-woven soft composite material Features and Applications: Polyester film polyester fiber composite material is a composite material made of polyester film coated with F-grade adhesive on both sides, and polyester fiber nonwoven fabric on both sides. The heat resistance rating is F grade, with good dielectric performance and high mechanical strength, suitable for Y series and J02 series motors, as well as slot and turn to turn insulation in electrical appliances.
Red insulation paper materials Red insulation paper is a soft composite material made of polyester film coated with adhesive and a two-layer insulation paper made of wood pulp insulation paper on one side. Insulation level: Class B; Temperature resistance: 130 â??. Appearance: The surface is uniform, free from burrs, bubbles, wrinkles, and defects Usage: Red Kuaiba paper combines the excellent insulation performance of wood pulp insulation paper and the good dielectric strength of polyester film, widely used in electrical equipment, suitable for slot to slot insulation, turn to turn insulation, and pad insulation of B-class motors. Characteristics of Red Quick Bus Paper Products Red fast paper has insulation and anti-interference effects, high electrical insulation, mechanical strength, softness, and elasticity; Red fast paper is particularly resistant to acid and alkali corrosion, tear and wear resistance, insensitive to moisture, non-toxic and flame resistant. Red fast paper has strong inherent dielectric strength, mechanical toughness, flexibility and resilience, and good thermal stability.
Cyan / Highland barley paper insulation paper material Green shell paper, also known as highland barley paper, is a common name for blue thin electrical insulating cardboard. Made from a mixture of wood fibers or cotton fibers and processed through certain processes, the green shell paper combines the excellent insulation performance of wood pulp insulation paper and the good dielectric strength of polyester film. The commonly used colors for thin electrical insulating cardboard are yellow and cyan, commonly known as yellow shell paper and cyan paper. Highland barley paper is processed with 100% wood pulp and has good electrical and mechanical properties. It is widely used as an insulation material in motors, appliances, instruments, and switches. It can also be used in 6520 polyester film composite foil base paper. The thickness of the cardboard is 0.1mm-0.5mm, and its colors include natural color, green shell color, red, blue, yellow, and so on. Characteristics and usage: Green shell paper has good mechanical strength, high electrical strength, flat and smooth surface, and high toughness. It is widely used as an insulation material in equipment such as motors, electrical appliances, and instruments. It is also used for slot to slot insulation, turn to turn insulation, and pad insulation of B-class motors. Simultaneously used for making 6250 polyester film composite foil. Use screws to fasten the wings and heads of a ceiling fan for home use, with a layer of green shell paper spaced between them. There is a green shell paper sandwiched between the press ring of the lathe spindle and the gearbox.
P/N:HS-1200A / B / C Color : Grey , Pink , Green Size: 50M(L)*300mm(W) Thickness: 0.23 /0.3 /0.45 /0.8mm Available: Sheet, die-cut and roll Thermal Conductivity : >1.0 W/m-k UL Number: E315996 Good insulation, thermal conductivity and flame retardant. applicable for electronic components IC, CPU, Telecom device, notebook, PC . Available in roll form, sheet form and die-cut parts Please message us via email for additional discussion.
Low & High Voltage Silicon Rubber Insulator Long Rod Composite Suspension Insulator Manufacturer Composite Suspension Rod Insulator (Export Type) Installation Instruction: 1. The transportation and installation of the insulator shall be taken good care without any throwing or collision, fiction with various sundries(wires, iron plates and tools etc.) and solid material. 2. When suspending the composite insulator, the knot shall be made on the attachment at the end. Knot on shed or sheath are strictly prohibted. When the rope has to be contacted with shed or sheath, the contacting area shall be packed with soft cloths. 3. Never apply the composite insulator as the assistant tool for the wire distribution and collecttion and collection in case that the insulator can be damages by impact or bending moment. 4. Do not step on the insulator shed with foot. 5. When installing the grading ring, attention shall be attached on the adjustments to make sure that the ring is vertical with the axial of the insulator. And for opening grading ring, the openning directions at both ends shall be consistent to facilitate the discharging and protect the shed. ______________________________________________________________________________ This's Jack from Nengxing Electric Power Equipment (China). We're an innovative high-tech enterprise integrating Rï¼?D, production, service and construction of surge arrester, composite insulator, fuse cut-out, etc. (as the attached pictures) We undertake a national technical project and supply for the State Grid of China.
Toughened glass insulators produced Electric provide the highest level of performance and long-term security for high voltage insulation. MECHANICAL & VOLTAGE RATING Toughened glass disc insulator 40kN up to 300kN, 11kV up to 765kV. STANDARD glass insulators comply with IEC60383. STRUCTURE Glass insulator consists of cast-iron cap, toughened glass body and pin which are agglutinated together by cement into an integrated piece. Cylindrical head has been adopted for insulators, which is the most advanced structure in the world with superiorities such as less dimension, lighter wieght, higher strength and longer creepage distance which can save metallic materials and reduce transmission line cost. Most High-voltage lines use ball & socket type toughened glass insulator, which is also called cap & pin. Cross-section is as below. Tongue & Clevis assembly is also used for glass disc insulator. Nomal type/Fog type APPLICATION Glass insulators are applied in HV and Extra HV transmission lines as dielectric and use for suspending conductors.
Vacuum Insulated Glass is ultra thin because it is constructed of two pieces of tempered glass with a narrow gap supported by metal pillars. It has higher resistance to deformation under external force, which doubles the wind pressure resistance and anti shock effect compared with common vacuum glass and tempered Low E argon insulating glass. vacuum glass has the obvious advantages Sound insulation performance Heat resistance Thermal insulation Sun proof function Anti condensation function Low e anti radiation function Long lifespan up to 50years Wind resistance Photochromic glass Fireproof and bulletproof performance Unique vacuum eye technology
- Cement-based, high performance, elastic thin plaster mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. SCOPE OF APPLICATION - On rough plaster indoors and outdoors in buildings - As a finishing coat on exposed concrete - Plastering of thermal insulation boards in jacketing thermal insulation systems - It is used to repair fine cracks and gaps on old plaster or concrete surfaces.
Composite Station Post Insulator Name: Composite Station Post Insulator No.: F-003 Addtime: 2017-06-22 Views : 25 General Introduction Sali supply Suspension Clamp, Pole Line Hardware, Eye Bolt, Pigtail Bolt, Insulator, Polymer Insulator, Orcelain insulator, Precing Connector, Preformed Guy Grip, Vibration Damper, Fastener etc. All of them with best quality and low price. This product is applied to high voltage power line service, and has features of good hydrophobicity,anti-aging, anti-leakage trace and electrical erode proof, tensile strength and bending strength, strong mechanical strength, with good performance in shock resistance good quakeproof & brittle-break proof, light weight, easy to installation, and the installation outline of top and base are the same size with porcelain pin type, they can exchange to use each other. Sali is a leading manufacturer of Insulator, Polymer Insulator, Orcelain Insulator, Glass Insulator, Guy Grip Deadend, Composite Pin Insulator, Wedge Tension Clamp, Anchor Clamp etc. Welcome to contact us to know more. Main Technical Parametes (performance meet GB/T20142-2006 IEC61952) Product Model Rated Voltage (kv) Rated Mechanical Bending Load (kn) Rated Catileve Load (kn) Structure Height H. (mm) Min. Arc Distance (mm) Min. Creepage Distance (mm) Diameter of Shed (mm) Lightning Impulse Withstand Voltage (peak)(kv) P.F.1min Wet Withstand Voltage (virtual value)(kv) FZSW-10/5 10 5 0.6 215 125 290 100/90 75 42 FZSW-15/5 15 5 0.6 245 170 600 138/118 105 45 FZSW-20/8 20 8 1.2 400 300 920 122/92 125 50 FZS-20/8 20 8 1.2 420 320 700 138 125 50 FZSW-35/6 35 6 2 460 360 900 148/118 185 95 FZSW-66/8 66 8 1.5 770 650 1930 160/130 325 140 FZSW-66/12 66 12 2 760 630 1940 215/185 325 140 FZSW-110/6 110 6 1.5 1150 1050 2950 160/130 325 200 FZSW-110/10 110 10 4 1220 1060 3260 215/185 450 200 FZSW-220/10 220 10 4 2250 2050 6520 215/185 950 395 Note: 1.The mini creepage distance is a little different as per product height. â?¢ 2. The product height and top, bottom accessories install dimension could be choosed from table, also could be supplied their dates to us by yourself. The 220kV insulator could be one section , and also two sections. 3. 110~220kV composite core post insulator only could be applied to busbar post or lateral post. It should be discussed with manufacturer if the prohucts are used for knife switch post.
Nuway Industries Pvt. Ltd. is one of the leading Manufacturer, Supplier and exporter of SMC DMC products in Pune, Maharashtra, India. The quality we deliver is unmatched and second to none. Full form of DMC is Dough Molding Compound. In DMC compounding/formation, used Glass fibre is chop strand form. Materials consistence in DMC is Fiber chop 17%-18%, unsaturated Polyester Resin 28-30%, Filler material like ATH and CaCo3 40%-45%, others are catalysts and pigments. Glass Fiber and other chemicals are mixed in imported mixing machine. Due to it’s dough properties, any shape of insulator and Busbar support can be made.
End Fitting for Insulator Name: End Fitting for Insulator No.: F-002 Addtime: 2017-06-22 Views : 20 Sali is a leading manufacturer of Insulator, Polymer Insulator, Orcelain Insulator, Glass Insulator, Guy Grip Deadend, Composite Pin Insulator, Wedge Tension Clamp, Anchor Clamp etc. Welcome to contact us to know more. -
Features Designed for high quality usage of heat preservation , sound insulation, dustproof. Especially the blinds inside the insulation glass assure the high privacy, long life and cleanness of the door and window. Blinds protected by the insulating glass for clean, privacy, long life Specification Glass thickness: 3.2/4mm+19a+3.2/4/5/6/8mm Glass type optional: Indoor: tempered glass Outdoor: tempered glass / low-e glass / laminated glass /frost glass Customized glass, tripl E pa ne glass is als o av ailable Slat width: 12.5mm , 15m m Size of glass: Height: 26~ 85, Width: 7~85 Heat transmission: k=2.0w/(m2.K) Shading coefficient: sc=0.18. -
