A gate valve is a type of valve that uses a gate or wedge-shaped disc to stop or start the flow of a fluid. The gate is attached to a stem that is operated by a handle or a wheel, and it can be raised or lowered to open or close the valve. When the gate is fully raised, it allows the fluid to flow freely through the valve. When the gate is fully lowered, it blocks the flow of the fluid. Gate valves are widely used in a variety of applications, including oil and gas, chemical processing, water treatment, and power generation. They are available in a range of sizes and materials to suit different applications and fluid types. In China, gate valves are commonly used in industrial piping systems and are designed to meet Chinese national and industry standards. They are known for their reliability, durability, and ease of use, and they are often used in applications where a tight seal is required to prevent leaks. Like JIS flanged ball valves, gate valves are typically connected to the rest of the piping system using flanges, which are fastened together with bolts or other fasteners. The valve body of the gate valve can be made of metal. Such as: forged steel gate valve, stainless steel gate valve, alloy gate valve, bronze gate valve, cast steel gate valve, carbon steel gate valve, etc. Among them, forged steel gate valves are widely used, especially as a cut-off device when the size is greater than 50mm. The main body can also be made of non-metallic materials. For example, ceramic gate valves have good wear resistance and hardness. Some other gate valves are made of special materials, such as Hastelloy gate valves, special steel gate valves and special alloy gate valves. To transport and process strong corrosive media, duplex stainless steel gate valves or super stainless steel gate valves are usually used to alleviate the problem, because they can work well in areas with corrosive environments.
Gate Valve Extended Stem
Specialityvalve is one of the top notch Pneumatic Knife Gate Valve Manufacturer in India. The Pneumatic Knife Gate Valve has a blade to cut through the clogging of heavy liquids. The valve is used in a lots of processing plants and it comes in larger sizes which makes them easier to handle. The Pneumatic Knife Gate valves are mostly used to shut off fluid flow in a fully open position, provide full flow. It is used in industries which deals with fluids. This pneumatic knife gate valve is operated automatically, using an actuator. Types of Pneumatic knife gate valve:- Pneumatic Bidirectional knife gate valvePneumatic Unidirectional knife gate valve Pneumatic Knife Gate Valve are used in industries such as: Chemical industry Refineries Mining and Mineral process Power Plant Cement Industry Description:- Materials: Cast Iron , Ductile Iron, CF8M, CF8, SS316, SS304 CF3M, WCB. Ends: Wafer, Lug, Flanged Size: 2 to 80 Class: 150 to 600 Pressure: PN 100 PN 450 Operations: Pneumatic Actuated Configuration for pneumatic actuators: Pneumatic single acting actuators Pneumatic double acting actuators Pneumatic rotary actuators Pneumatic Scotch and Yoke actuators Pressure: 25 bar Temperature: Standard -4F to 200F (-20C to 93C) Low -40F to 176 F (-40C to 80C) High 0F to 300�°F (-18C to 149C) Looking for the best Pneumatic Knife Gate Valve? Specialityvalve is the best Pneumatic Knife Gate Valve Manufacturer in India. Here we supply valves to our clients globally. We provide customized valves of the best quality and it is cost-effective. Our company main aim is quality, safety, and reliability of our products. Our valves are manufactured using best quality materials in our advanced manufacturing unit.
Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-1 F.F. undrilled Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-1 F.F. undrilled Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45' C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-2 F.F. undrilled Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product :Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45C Our Worksâ?? Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-2 F.F. undrilled Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product : Gun Metal Gate Valve Product Standard : IS-778:1971 Pressure/Class/Rating : Class-3 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 50 Kg/cm Hyd. Seat & Back Seat Test Pressure : 40 Kg/cm Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Design - API 600, BS 1414 Application - Oil and Gas, Refinery, Petrochemical, Pharmaceutical, Chemicals, Steel sectors, Power, Textile Face to face - ASME B16.10 Flanges - ASME B16.5 from 2" to 24" BW to asme B16.25 Testing - API 598
Handwheel Nut - Steel Handwheel - SG Iron / Steel Identification Plate - Aluminium (anodised) Yoke Sleeve - ASTM AS82 Type 416 Wedge Disc - ASTM A217 Gr. CAI 5 Body Seat Ring - ASTM A276 Type 410 Body - ASTM A105 Applications - Refinery, Petrochemical, Pharmaceutical, Steel Sectors,Textile Class - 800 We have carved a niche amongst the most dominant names in this domain, instrumental in providing an excellent quality range of Forge Steel Gate Valve. Material of Constructions: Bonnet: ASTM A105 Stem: ASTM A479 type 410 Wedge disc: ASTM A217 Gr. CA15 Stem packing: Graphite moulded rings with braided top/bottom rings Gasket: Spiral-wound SS type 304 with graphite filler Cap screws: ASTM A193 Gr. B7 Gland bush: ASTM A276 type 410 Gland flange: ASTM A105 Gland stud/nut: ASTM A276 type 410/ASTM A194 Gr. 2H Identification plate: Aluminium (anodised)
Slab Gate Valve Wholesale can be separated into guidebook flat entrance valve, pneumatic flat gateway valve as well as electric flat gate valve according to the driving mode. According to the use and celebration, it can be separated into diversion hole level entrance shutoff, non-diversion hole flat gate valve, oil area flat entrance valve, pipe flat entrance valve and also gas level entrance valve, etc wellhead equipment manufacturers Usage characteristics This series of products takes on a new sort of floating seal framework, which is suitable for oil as well as gas pipes with a pressure not higher than 15.0 MPa and also a temperature level of -29 to 121 �° C. It is used as a control tool for opening and also closing and also managing gadgets. The product has an unique structural design., Appropriate material option, rigorous testing, light procedure, strong rust resistance, put on resistance, disintegration resistance, is an optimal new equipment in the oil sector.
2000-15000psi 1-13/16" to 7-1/16" The AQE wellhead valves is available with an optional manual closing and locking screw. The adjusting nut in the bind cylinder head absorbs the overload or testing pressure applied to the opening side of the valve, protecting the stem from overload. The cylinder ports are located a sufficient distance from the wellhead systems cylinder head to allow in the piston cover the exhaust port before the end of the stroke. This arrangement provides enough damping to protect the cylinder from shock loading. The overload or testing pressure applied to the closing side of the cylinder are absorbed when the piston bottoms out against the packing gland of the stem. The tail rod and the operating stem have back seating shoulders which allow replacement of the stem packing
2000-15000psi 1-13/16" to 7-1/16" The wellhead gate valve wholesale is available with an optional manual closing and locking screw. The adjusting nut in the bind cylinder head absorbs the overload or testing pressure applied to the opening side of the valve, protecting the stem from overload. The cylinder ports are located a sufficient distance from the cylinder head to allow in the piston cover the exhaust port before the end of the stroke. This arrangement provides enough damping to protect the cylinder from shock loading. The overload or testing pressure applied to the closing side of the cylinder are absorbed when the piston bottoms out against the packing gland of the stem. The tail rod and the operating stem have back seating shoulders which allow replacement of the stem packing
Expanding Gate Valves Expanding gate valve consists of one gate body and related gate segment. The contact surface between are designed to milled V structure. AQE Expanding gate valves are available in sizes 2-1/16 "through 4-1/16". working pressure of 2000 psi through 5000 psi. wellhead design Features The upper/lower roller thrust bearing minimizes operation torque; Seats can be lubricated from grease injection fitting to reduce abrasion and promote long life; Non-rising stem design minimize operation space
Ball Screw Gate Valves The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance. rac valves - ball screw gate valves supplier is a type of large bore gate high pressure valve which were improved from Cameron FLS-R gate valve, its the main component of frac tree, the frac valve is often used on the top of the wellhead on high pressure oil well, can do the frac job for Isolating the fluid from the well. The body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphating to improve corrosion resistance. Features: Valve with Ball Screw Ball screw structure lowers operating time Gate valve design Stem structure is pressure balanced with switch indicator wellhead equipment manufacturers Specifications: Applies to big bore high pressure system Working pressure:2000 PSI-20000 PSI Connection: Flange* Thread Union BW Size: 1 13/16"-7 1/16' Working temperature:K. L .P. R .S. T. U. V Material Class :AA.BB.CC ,DD .EE.FF.HH Specification level: PSL1-PSL4 Performance Requirement: PR1. PR2 AQE wellhead valves Application Oil, Chemical industry, etc. Medium Oil Gas Water.etc
Slab Gate Valve The FC gate valve features a non-rising stem with a slab gate, Full-Bore Thru-Conduit Design, Floating Slab Gate and Seats .floating seat ring body bushing design to provide safe dependable service. The FC gate valve features a non-rising stem with a slab gate wholesale, Full-Bore Thru-Conduit Design, Floating Slab Gate and Seats .floating seat ring body bushing design to provide safe dependable service. It Is available in flanged or threaded ends in standard bore sizes from 1-13/16" thru 7-1/16" in working pressures of 3000 psi thru 15000 psi wp. Seat rings, body bushings, gate, stem are easily replaced in the field. Simple routine maintenance program limits repairs, eases operation, protects against corrosion, and extends service life. wellhead components China SPECIFICATIONS Manufactured and Tested in Accordance with API Spec 6A Forged Steel Body and Bonnet True Bi-Directional Valve Low Operating Torque Quick Release Hand Wheel API Spec 6A PSL 1,2,3 AQE wellhead service companies Material Class DD, EE. FF, to NACE MR-01-75 Available from 3000 psi to 15,000 psi in all Full-Bore Sizes Learn more information about AQE,you can visit our website.