Virgin coconut oil (VCO) can be produced from fresh coconut meat, milk, or residue. Producing it from the fresh meat involves removing the shell and washing, then either wet-milling or drying the residue, and using a screw press to extract the oil. VCO can also be extracted from fresh meat by grating and drying it to a moisture content of 10–12%, then using a manual press to extract the oil. Producing it from coconut milk involves grating the coconut and mixing it with water, then squeezing out the oil. The milk can also be fermented for 36–48 hours, the oil removed, and the cream heated to remove any remaining oil. A third option involves using a centrifuge to separate the oil from the other liquids. Virgin coconut oil looks slightly different from ordinary coconut oil and this differentiation cannot be made with the naked eye. This difference is mainly due to the presence of certain colloidal and other particles and moisture within it. On the other hand, ordinary oil is refined and is mainly left with the fatty acids in it and almost nothing else. Ideally, virgin coconut oil should be as clear as water. However, its color may vary slightly depending upon its processing. Virgin coconut oil has a very good taste and smell, like that of fresh coconuts, since it is derived from fresh coconuts and is subjected to very low, if not totally nil, heat and sunlight. It is also not refined. This preserves all the natural goodness of this oil, including a high content of vitamin-E and minerals, which are otherwise almost completely robbed from ordinary coconut oil during processes like heating, filtration, refining, and bleaching, which are done to make it colorless and odorless. Furthermore, virgin coconut oil is very effective as a moisturizing agent. Its antioxidant properties are far better than those of normal coconut oil.
Crude Palm Oil (CPO) is an edible oil which is extracted from the pulp of fruit of oil palms. The color of pulp is naturally reddish in colour as it contains high amounts of beta-carotene. Crude palm oil or palm oil is one of the most consumed and produced oils in the world. This easy to produce, and very stable oil is used for a wide variety of foods, cosmetics, hygiene products, and can also be used as a source of biofuel or biodiesel. Palm Kernel Oil is produced after separating the seed from the oil palm fruit, cracking and removing the shell. It can be further processed into Crude Palm Kernel Oil and Palm Kernel Expeller or Cake. Palm Kernel Oil is commonly used as a commercial cooking oil due to its stability at high temperatures. RBD Palm Olein is the liquid fraction of palm oil obtained by dry-fractionation process. The product is widely used in food processing industries such as confectionery, noodles, snacks, dairy beverages, canned food, etc.
BASE OIL SN 100-150-300-500-600-700 Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds. Base oils chemical properties and their impact on the usage of final lubricant: 1 volatility: reduction of the oil, oil thickening, sediments 2 surface activity: foaming, pressure tolerance, air release, emulsion expansion 3 oxidations: sediments, oil thickening, metal oxidation, mud forming 4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling 5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;
Light-Heavy Crude Oil, from Arab Gulf non sanctioned origin, best realistic economic conditions, safest workable procedures, transparent annul contracts, 12 monthly deliveries, transaction executed bank to bank through our Primary Banks, , delivery on STO & CIF ASWP,, zero upfront payment
Virgin coconut oil is the purest form prepared from fresh meat of the mature coconut and coconut milk. Virgin coconut oil extraction process does not involve any chemical processing that helps to retain natural qualities with the oil. It is known as the mother of all oils as it is a treasure trove of vitamins, minerals, and antioxidants that imparts good health. The Virgin coconut oil is considered superior for use as edible oil, hair oil and baby oil because of its pleasing aroma and purity. It is applied on the body of babies to protect from skin diseases. Virgin coconut oil contains much higher amounts of vitamin E and bioactive compounds like polyphenols and because of its low free fatty acid (FFA) content, this oil has a longer shelf life. Available in: 500ml, 1L, 5L, 20L
Coconut oil is rather a unique cooking oil as it contains the short and the medium chain saturated fatty acids It finds extensive use in the food industry due to its characteristics such as easy melting behavior resistance to oxidative rancidity pleasing flavor and good digestibility Coconut oil has gained importance as a dietary fat because of its high content of lauric acid the source of monolaurin in the body and 16W content of Omega 6 The refined coconut oil is water white in color with no aroma Since coconut oil has the lowest level of unsaturated fatty acids among all vegetable oils the cost of hydrogenation is much less than all other oils Studies showed that coconut oil Does not elevate blood total cholesterol and increases blood HDL cholesterol If consumed along with coconut kernel lowers blood cholesterol Does not elevate LDL cholesterol or LDL cholesterolHDL cholesterol ratio Decreases serum triglycerides Available in 500ml 1L 5L 20L
Rose petals are edible and a traditional ingredient in the foods in the middle east, especially in desserts. In addition to sprinkling rose water on desserts, it is sprinkled on guests as a sign of welcome before the meal. Rose petal jam and cordial are still popular in Europe. Rose hips are a rich source of vitamin c and can be made into a conserve or jam. The petals are then eaten as a candy or used to decorate desserts. Roses are used for excess menstrual bleeding, digestive problems, gonorrhoea, and for liver symptoms. Delicious medicinal preparations can be made from rose petals, including syrup of roses, honey of roses, sugar of roses, rose water, and vinegar of roses. Rose petals have been used for conditions such as fevers, headache, jaundice, joint pain, fainting, weakness, trembling of the heart, poor digestion, and infection.
Juniper oil is used in aromatherapy to help stimulate and strengthen the nerves and bolster the spirits in challenging situations, while helping to relieve urine retention. It is used for treating rheumatism, arthritis and gout, as well as cellulite, acne, dermatitis, blocked pores, psoriasis and weeping eczemas. The main chemical components of juniper oil are a-pinene, camphene, b-pinene, sabinene, myrcene, a-phellandrene, a-terpinene, y-terpinene, 1,4-cineole, b-phellandrene, p-cymene, terpinen-4-ol, bornyl acetate, cayophyllene and trace amounts of limonene, camphor, linalool, linalyl acetate, borneol and nerol.
COCONUT OIL COLD PRESS Odor Mild Sweet Color Transparent Clear Taste Mild coconut taste Characteristics Liquid Oil (above 25 degree Celcius) Analytical Properties Moisture (Karl Fischer) 0.08 % Peroxide Value 0 mEq O2 / kg Lauraic Acid 48.22 % Iodine Not detected Free Fatty Acid 0.08 % Color Lovibond R=0.2; Y=0.6; B=0.0; N=0.0
COMMODITIY : OMAN LIGHT CRUDE OIL ORIGIN : OMAN Quantity per Month: 6,000,000 Barrels Contract : 12 months Roll's extensions Price : Gulf Platt minus 4.50$ per bbl Inspection: Inspection document must be issued by SGS, Or similar International Inspection companies, like CHEOCHEM. Payment Terms : Payment by DLC MT700 Verbiage (100% sight, Irrevocable and Confirmed), valid for 365 days to be issued by / from a credit worthy Bank in Euro currency in Favour of the Seller. Packing : Bulk Delivery : 30 days from LC
100% sunflower oil, refined, deodorized and winterized, manufactured in China. It is available in 1, 3 & 5L PET bottles. It is product of premium quality, manufactured at ISO & HACCP certified factory. KINDLY CONTACT US DIRECTLY WITH YOUR EMAIL ADDRESS FOR MORE DETAILS AND QUOTATION!!! Products Details : Type Sunflower oil Product Type Nut & Seed Oil Processing Type Refined Refined Type Fractionated Oil Cultivation Type Organic Use Cooking Packaging 1L, 2L, 2.5L, 5L bottles, or flexitank Place of Origin China Color Yellow, clear yellow Purity 100% Grade 1st Grade, Grade A Certification ISO, HACCP Specification PARAMETER CHEMICAL SPECIFICATIONS Specific Gravity at 20c 0.916-0.923 Refractive Index at 20c 1472-1474 Lodine Value 120-143 . Unsaponification 2.5 Max Free Fatty Acid 0.1% Max. Peroxide Value 1 Max. (meg/kg) Color Max. 2 Red (on 5 Lovibond cell) Moisture 0.1% Max Appearance Clear and Bright Odor and Flavor Odorless and Bland Our products obtain HACCP and ISO certificate, and approved by international customers. Labeling customized is acceptable, we can print labels on the bottles to be provided by buyers Packing details: Packing in Flexitank: 22MT in one 20FCL; Packing in bottles and carton , 18 MT in one 20FCL; 1 litre bottle,20 bottles/carton; 2 litre bottle,10 bottles/carton; 2.5 litre, 10 bottles/carton; 5 litre, 4 bottles/carton; 1MT=1100L ,19800L/FCL packing in bottles and carton, 24200L/FCL packing in Flexitank.
We supply Light Cycle OIl (LCO) Origin: Kazakhstan First Lift: 50,000 Metric Tonnes Contract: up to 100,000 MT/month x 12 months CIF Price: USD $270/MT LCO, a by-product of the fluid catalytic cracking (FCC) process in a petroleum refinery, can be used as a blendstock for the production of diesel and jet fuels. Light Cycle Oil (LCO) is the diesel boiling range material, which is produced in addition to gas and petrol in the Fluid Catalytic Cracking Unit (FCCU). The optimised partial conversion hydrocracking process provides an effective and flexible process to process LCO into desired products such as very-low sulphur diesel and high-octane high-aromatics naphtha.