Assorted garments are made in 100% Polyester knitted and waved fabrics Fabric is available with inside brush finish and without inside brush finish Available in sublimation and cut & sew variants Durable fabric with Azo Free, Bio Polish, Reactive dye and non-bleeding colors Available in colors of your choice (Pantone colors are also possible) We can do customization through direct printing, heat transfer, 3D printing and rubber patches Embroidery and applique are also available
Assorted garments are made in 100% Polyester knitted and waved fabrics Fabric is available with inside brush finish and without inside brush finish Available in sublimation and cut & sew variants Durable fabric with Azo Free, Bio Polish, Reactive dye and non-bleeding colors Available in colors of your choice (Pantone colors are also possible) We can do customization through direct printing, heat transfer, 3D printing and rubber patches Embroidery and applique are also available
MMO Coated Titanium Anodes Mixed metal oxide coatings on titanium substrates are widely used as anodes in various electrochemical processes, such as chlorination, oxygen production, electrolytic deposition of metals and cathodic protection in the chlor-alkali industry. The application of materials with high conductivity and long-term stability in electrochemical environments is considered to be one of the main goals of electrochemical cell engineering. Metal oxides such as RuO2 and IrO2, which have high electrical conductivity and electrochemical activity, have received much attention as electrocatalysts in the electrochemical industry. In order to further improve the stability of these oxides, other oxides such as TiO2, Ta2O5 and ZrO2 have been added to these active oxides. Anodic chloride and oxygen precipitation are the most important reactions in the application of these materials. Oxygen precipitation is the most important reaction in electrochemical processes such as water electrolysis, electrolytic deposition of metals and cathodic protection. In addition, this reaction is unavoidable in many anodic processes. RuO2-based coatings (e.g. pure RuO2 and RuO2-TiO2) are very stable to the chloride precipitation reaction. However, they are unstable to anodic oxygen precipitation and are subject to severe corrosion in acidic media. IrO2 is more stable for the oxygen precipitation reaction, but its oxygen precipitation electrocatalytic activity is lower. Therefore, due to the favourable properties of the two oxides, a mixture of IrO2 and RuO2 could be a suitable electrocatalyst for the oxygen revolution. Mixing two or more different oxides can affect the electrocatalytic performance of the oxides by changing the microstructure, surface composition and morphology of the electrocatalyst components. In addition, the surface composition, morphology and microstructure of mixed oxide coatings are not homogeneous and may be affected by preparation factors and active oxide content. Ruthenium mixed oxide coated titanium anodes are generally used in environments such as hydrochloric acid, electrolytic seawater and electrolytic brine environments. Fields of application Electrolytic production of non-ferrous metals, electrolysis of chlorinated salts, electrolysis of salt/seawater, metal foil manufacturing, electrochemical treatment of metal foil surfaces, disinfection, electrolytic extraction and recovery of non-ferrous metals, organic electrolysis, cathodic protection, electrodialysis, production of acidic and alkaline ionised water, treatment of industrial wastewater.
Description: Pistons are made from aluminium with high silicon content, resulting in a very abrasive material. High-silicon aluminum alloy has higher hardness and wear resistance than other aluminum alloys. When cutting, the cutting tool alternately cuts soft aluminum-based and hard silicon particles, the carbide insert are easy to wear and also easily produce BUE, which will affect the roughness and processing accuracy. In order to avoid the BUE and work hardening, the cutting edge must be sharp and the cutting edge must be smooth. PCD tool just meets all these requirements.Machining such material requires high wear resistant tooling, such as cutters and inserts made of PCD. Details (1) The hardness of PCD can reach as high as 8000HV, which is 8 to 12 times of cemented carbide. (2) The thermal conductivity of PCD is 700W/mk, 1.5 ~ 9 times of cemented carbide,even higher than PCBN and copper alloy; (3) The friction coefficient and expansion coefficient of PCD are small; (4) PCD and non-ferrous metals and non-metallic materials, the affinity between small; (5) Sharp edge and blade surface roughness Applications of PCD Grooving Tool for Pistons: The idea for machining hard ferrous metals, such as hardened steels, and gray cast iron. PCBN inserts are widely used to machine brake discs, engine cylinder liners, engine blocks, break drumsticks, valve seats & guides, gears, and mold, etc. Application Cases of PCD Grooving Tool for Pistons: Advantages of PCD Grooving Tool for Pistons: Enables high-speed machining while maintaining longer tool life. Provides consistent products, simplified quality control, and lower cost. Maximum stability. Maximum economy. Maximum feed/speed. Suitable for general and optimized final machining Pack: Cartons and bubble wrap Payment: TT; Paypal; Delivery Time: Seven to ten days Sample: No free samples are provided Certification: ISO9001:2008 FOB Port: Shanghai Qingdao Guangzhou
Horizontal dough mixer machine is a type of machine that can evenly mix flour, water, and other raw materials to make the dough soft and elastic. This machine reduce the labor cost, improves the quality and uniformity of the dough, and automatically adjust the dough mixing time, ensures the texture and taste of the dough. Main types classified the capacity:7.5,15,25, 50kgs/batch. Vacuum,non vacuum. Horizontal dough mixer machine Main material:Stainless steel Size:550*410*570mm Capacity:7.5kgs/batch Mixing time:4-10min/batch Power:0.75kw N.weight:43kgs Warranty:One year After sales service:Video and online meeting
Introduction:The PCD Standard Inserts are made by imported element 6, GE raw materials, used high-precision peripheral grinder to produce high-quality PCD tools. PCD Standard Inserts are widely used in high-silicon aluminum alloy, stone and other non-ferrous metals and non-metal processing. Details Photo: Models: Applications of PCD Standard Inserts: 3c field, aerospace, automotive industry, etc. Specificationï¼?Please contact me for specific specifications Application Cases of PCD Standard Inserts: Advantages of PCD Standard Inserts: Higher metal removal rates Faster cycle times Reduce waste Quality improvement Stricter size control Perfect surface finish Increase productivity Improve equipment utilization Pack: Cartons and bubble wrap Minimum Order Quantity: Price Range: Payment: TT; Paypal; Delivery Time: Seven to ten days Sample: No free samples are provided Certification: FOB Port: Shanghai Qingdao Guangzhou
We are supplier and dealer of good quality Lead Ingots and we have available stock for sell in our warehouse
We are supplier and dealer of good quality Zinc Ingots and we have available stock for sell in our warehouse
We are supplier and dealer of good quality Copper Cathode and we have available stock for sell in our warehouse
We are supplier and dealer of good quality Aluminum Ingots and we have available stock for sell in our warehouse
Pet Bottle Fake pack in pp Jumbo Bag, the Pet Bottle Fake ready for loading, hot wash without any attachment
HDPE Blue Drum Regrind pack in pp Jumbo Bag, the HDPE Blue Drum Regrind ready for loading
Intel Gold Pin CPU Processor 386 & 486 Scrap for sell, this Gold Pin CPU Processor 386 & 486 is used for Gold recovery
We are interested in offering 50 tons of CPU 386 & 486 Intel Processor Scrap with Gold Pins. These ceramic processors are highly sought after for their gold recovery potential. Each unit is carefully inspected to ensure it meets the highest standards of quality, making it ideal for gold extraction and recycling. The scrap is packaged securely in cartons to facilitate safe transportation and handling. The loading port for this offer is Sheffield Port
We are interested in selling high-quality PVC (Polyvinyl Chloride) Window Profile Regrind in a substantial quantity of 1000 tons. The PVC regrind is clean, white, and hot washed, ensuring that it is free from liquids and dirt, packed efficiently in PP Jumbo Bags for secure transportation
We are actively seeking buyer for high-quality Natural HDPE (High Density Polyethylene) Milk Bottle Regrind in a large quantity of 1000 tons. Our HDPE regrind is sourced from natural HDPE milk bottles, hot washed, and very clean, ensuring best quality suitable for various recycling needs. We provide HDPE Milk Bottle Regrind in durable PP Jumbo Bags for secure and efficient transportation
Scrap Lithium Battery.
Cooper scrap, plastic scrap.
Scrap like steel scrap.
We offer a wide rage of high yield gold recovery for computer scrap products and below is a list of the cpu scrap types we have. Intel 486 & 386 Cpu Intel I960 & Motorola Cpu Intel Pentium Pro Cpu AMD 486 & 586 Cpu Gold Top Cpu Gold Top & Bottom Cpu Intel Pentium 1 DLP Cpu
