Transformer Oils manufactured by Panama Petrochem Ltd are from selected, severely Hydrotreated Naphthemc & Isodewaxed / Hydrocracked Paraffinic Oils and Naphthenic Oils that are free from polar compounds, having high oxidation stability and ageing properties. The ultra low sulphur and wax free Naphthenic Oils/Paraffinic oils along with low Viscosity Index ensure excellent cooling characteristics, high solvency and low corrosivity. These optimally refined Transformer Oils also possess very good electrical and insulating properties, oxidation stability and controlled low or negative gassing tendency. Panama Petrochem Ltd manufactures Transformer Oils that meet the following standards: IS 335:1993 IEC 296 Class I & II IEC 60296 BS148 Grade I & II
1. Technical data coal: . Residual moisture (adb) : 2, 63% . Total moisture (ar) : 3, 90% . Inherent moisture (adb) : 2, 63% . Ash content (adb) : 6, 17% . Volatile matter (adb) : 45, 52% . Fixed carbon (adb) : 45, 68% . Total sulphur (adb) : 0, 47% . Calorific value (adb) : 7583 cal/g . Calorific value (ar) : 7484 cal/g . Calorific value (daf) : 8315 cal/g 2. Quantity : . 3.000mt per day, . 15.000mt per week, . 50.000mt per mont. 3. Size : +-/50mm 4. Origin : indonesia 5. Port : kalimantan 6. Price : $85 per mt 7. Payment : t/t.(50%-40%-10% negociate)
Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds Artificial Stone & Concrete Casting Silicone Rubber Features: Amazing fluidity and easy to operate Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic) Delicate design available Mixing ration: 1:1, easy to mix Easy de-molding Excellent tension and tear strength High performance in duplication Shrinkage is almost zero (below 0.1) Excellent resistance to weather, temperature, aging, acid and aging-proofing. High resistance to high temperature and aging(resist -60â?? to 250â??) Appearance: Part A:a non-toxic and odorless liquid with translucent color and platinum inside. Part B: a non-toxic and odorless liquid with translucent color. ATT: We can do any curing time as your requirements. Technical Data Characteristics of the non cured product Properties G-820 G-825 G-830 G-835 G-840 A B A B A B A B A B Appearance low viscous liquid Colour translucent Density [g/cm 3 ] at 23 �°C, approx 1.10 1.10 1.10 1.10 1.10 Viscosity [mPa�·s] at 23 �°C, approx 5000�±1000 6000�±1000 7000�±1000 8000�±1000 9000�±1000 Polymerisation Curing conditions: 1h at 80 �°C Properties G-820 G-825 G-830 G-835 G-840 Hardness Shore A 20�±2 25�±2 30�±2 35�±2 40�±2 Tensile strength [N/mm 2 ] 45�±10 50�±10 55�±10 55�±10 60�±10 Elongation [%] 500�±50 500�±50 450�±50 450�±50 450�±50 Tear strength [N/mm] 22�±2 24�±2 26�±2 24�±2 12�±2 Application: GC RTV silicone G-8 series are great for artificial stone casting. They are widely used for architectural elements, block-outs & hole former, concrete counter tops, flexible form liners, GFRC, manufactured stone veneer, ornamental precast & statuary, stamped & textured concrete, etc. Operation Method: Both pouring and brushing operation methods for our artificial stone casting silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brushing. Notice What is the hardness should I choose? Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design. Warm Tips: The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry. Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing. Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices). Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include: -Natural or synthetic rubber, vulcanized with sulphur derivatives. -Poly-condensation RTV catalyzed with metallic salts. -PVC stabilizing agents. -Amine cured epoxies. -Sulphur, tin and amines derivatives. -In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.
WHITE REFINED SUGAR WHOLESALE BRAZIL ORIGIN WHOLESALE SUGAR ICUMSA 45 ICUMSA-45 Sugar is a most Highly Refined form of Sugar. ICUMSA-45 Sugar has a Sparkling White Color, and is the type most often sold direct to Consumers. It is suitable for Human Consumption and use in a wide range of Food applications. It is perpetually in High demand as it is the safest form of Sugar, due to the fact that the refining process by which it is created removes the Bacteria and Contaminants often present in raw sugars. Note: Our sugar sales are made on a ship-based basis. 12.500 TON internal orders are not accepted. We have transit sales. Origin: Brasil Item Condition: New Brand: Unbranded Package Shape: Big Bag or 50KG sacks Sales Type: Wholesale, Complete Ship Documents: Analysis Reports, Quality Documents Payment Method: Cash or SBLC (Standby Letter of Credit) Specifications Colour: MAX. 45 Icumsa Polarization: MIN. 99.8 % Degree Polarization (0Z) Moisture: MAX. 0.04 % by weight Conductivity Ash: MAX. 0.10% by weight Invert Sugar: MAX. 0.10 % by weight Average Size: 0.60 - 0.90 mm. Target M.A: 1.00 �± 1.50 mm. Sediments: MAX. 0.02% by weight Arsenic: MAX. 0.50mg/kg Lead: MAX. 0.50mg/kg Copper: MAX. 1.50mg/kg Pesticide: NONE Sulphur Doixide: NONE Pathogenic Bacteria: NONE Coli-form Bacteria: MAX. 10 CFU/10 GM E. Coli: NONE Yeast & Mold: MAX. 10 CFU/10 GM
MAZUT (M100) ORIGIN: QATAR QUALITY: Established by the International Standards (SGS). Specification: Standard Form of Packing: As Per Buyers Request Minimum Order Quantity: 10.000 Metric Tonnes Production Capacity: 500.000 Metric Tons Per Month. Shipping Terms FOB or CIF ASWP PORT : RAS LAFFAN/HAMAD/ROTTERDAM/ FOB PRICE: USD: $ 380 Metric Tons Inspection: SGS or Equivalent CiF PRICE USD: $ 410 Metric Tons COMMISSION CHARGED SHIPMENT TIME within 20 days from LC DATE and DELIVERY within 35 to 45 days from date of bill of ladings depend on chosen port. NO, TTM/FTF Mazut is a heavy, low-quality fuel oil, used in generating plants and similar applications. Mazut-100 is a fuel oil manufactured to GOST specifications, for example, GOST 10585-99. The most important thing when grading this fuel is the sulfur content. Mazut 100-75 VLS and Mazut 100-99 Grade I are actually the same thing. GOST merged the old classifications of 75 and 99 into a new seven-grade classification, all under 100-99. The grades are represented by these sulphuric levels: â??Very Low Sulphurâ?? is mazut with a sulfur content of 0.5% â??Low Sulphurâ?? is a mazut with a sulfur content of 0.5-1.0% â??Normal Sulphurâ?? is a mazut with a sulfur content of 1.0-2.0% â??High Sulphurâ?? is a mazut with a sulfur content of 2.0-3.5%.
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200°C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200°C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance -> 1580 °C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025°C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �?± x 10-7 (°C-1) [50°C-500°C]  63.8 RESIDUE CONTENT Residue Content on 63m (w/w %)  1.7 Residue Content on 106m (w/w %)  1.6 Fired Shrinkage (%) (@1200°C)  8.5 Water Absorption (%) (@1200°C)  2.6 DRY MOR (kg/cm2)  57 FlRED COLOUR L Value  71.3 a Value  4.4 b Value  21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%)  60.23 Aluminium as A2O3 (%)  25.26 Titanium as TiO2 (%)  1.00 Iron as Fe2O3 (%)  1.94 Sodium as Na2O (%)  0.04 Potassium as K2O (%)  1.70 Calcium as Cao (%)  0.01 Magnesium as MgO (%)  0.60 Phosphorus as P2O5 (%)  0.03 Manganese as MnO (%)  0.01 Chromium as Cr2O3 (%)  0.01 Zirconium as ZrO2 (%)  0.04 Hafnium as HfO2 (%)  0.00 Sulphur as SO3 (%)  0.00 Strontium as SrO (%)  0.01 Loss on Ignition (%) (@1025°C)  9.1 MOISTURE CONTENT (%)  28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, ± x 10-7 ( C-1) [50 C-500 C] - 63.8 RESIDUE CONTENT Residue Content on 63¼m (w/w %) - 1.7 Residue Content on 106¼m (w/w %) - 1.6 Fired Shrinkage (%) (@1200 C) -8.5 Water Absorption (%) (@1200 C) - 2.6 DRY MOR (kg/cm2) - 57 FlRED COLOUR L Value - 71.3 a Value - 4.4 b Value - 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) 60.23 Aluminium as A2O3 (%) 25.26 Titanium as TiO2 (%) 1.00 Iron as Fe2O3 (%) 1.94 Sodium as Na2O (%) 0.04 Potassium as K2O (%) 1.70 Calcium as Cao (%)  0.01 Magnesium as MgO (%)  0.60 Phosphorus as P2O5 (%)  0.03 Manganese as MnO (%) 0.01 Chromium as Cr2O3 (%) 0.01 Zirconium as ZrO2 (%)  0.04 Hafnium as HfO2 (%)  0.00 Sulphur as SO3 (%)  0.00 Strontium as SrO (%) 0.01 Loss on Ignition (%) (@1025 C) 9.1 MOISTURE CONTENT (%)  28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 yearsâ?? experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �± x 10-7 (�°C-1) [50�°C-500�°C] --> 63.8 RESIDUE CONTENT Residue Content on 63�¼m (w/w %) --> 1.7 Residue Content on 106�¼m (w/w %) --> 1.6 Fired Shrinkage (%) (@1200�°C) --> 8.5 Water Absorption (%) (@1200�°C) --> 2.6 DRY MOR (kg/cm2) --> 57 FlRED COLOUR L Value --> 71.3 a Value --> 4.4 b Value --> 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) --> 60.23 Aluminium as A2O3 (%) --> 25.26 Titanium as TiO2 (%) --> 1.00 Iron as Fe2O3 (%) --> 1.94 Sodium as Na2O (%) --> 0.04 Potassium as K2O (%) --> 1.70 Calcium as Cao (%) --> 0.01 Magnesium as MgO (%) --> 0.60 Phosphorus as P2O5 (%) --> 0.03 Manganese as MnO (%) --> 0.01 Chromium as Cr2O3 (%) --> 0.01 Zirconium as ZrO2 (%) --> 0.04 Hafnium as HfO2 (%) --> 0.00 Sulphur as SO3 (%) --> 0.00 Strontium as SrO (%) --> 0.01 Loss on Ignition (%) (@1025C) --> 9.1 MOISTURE CONTENT (%) --> 28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200�°C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200�°C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025�°C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025 C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
100% Guaranteed Environmental Friendly Resource Coconut shell charcoal is a 100% guaranteed environmental friendly resource as it made of sustainable natural resource. Coconut Shell charcoal can be easily briquetted, safe and also it leaves less ash and makes the surrounding environment friendly. Coconut Shell retains moist after the nut is used and water is removed which helps in safe and quick ignition. There is no emission of Sulphur or any other toxic gas hence it is safe to cook indoor. The high calorific value in coconut shell charcoal gives a long burning time compared to the usual hard wood charcoal. It is safe when used indoor and outdoor. Definitely It will be very efficient fuel like BBQ, Garment factory, Paper Industry, Tea factory and metallurgy industry. Fuel Comparision Coconut Shell Charcoal-Natural Lumps Moisture Less than 14% Ash Less than 5% Volatile matter Less than 17 % Calorific value More than 7500 Kcal/kg Fixed carbon More than 70% More than 70% Appearance Uneven lumps & Granules Length 5 mm -70 mm Breadth 5 mm - 70 mm Thickness 01 mm -03 mm Weight 2 - 20 grams Packing 25 & 500 Kg Package (pp material filled in HOPE & Jumbo bags respectively) Product Specification Fixed carbon 70 to 75% Volatile Matter 14 to 18% Ash 5 to 8 % Moisture Below 5 % Gross Calorific Value Above 7000 Kcal / Kg Packing 1Kg,2Kg, 5 Kg, 10 Kg carton box and 25 Kg Bag Transportation 40 Feet Container 20 to 24 Metric Ton 20 Feet Container 12 to 15 Metric Ton
Name of the Product: Manuka Gluco VENZ Product Description: Manuka GlucoVENZ is innovative natural product formulated from special blend of NZ Manuka honey, Glucosamine HCL, Bee venom VENZ, collected by ApiHealth NZ Ltd from New Zealand bees with use of ApiHealth patented technology (NZ patent #329585). The product designed for joint mobility support. Main ingredient of Manuka GlucoVENZ is Multifloral Manuka honey MGO100+, which is gathered in New Zealand from Manuka bush, Leptospermum scoparium. Manuka honey is fully certified with MPI definition and MGO testing. Innovative ingredient of Manuka GlucoVENZ is NZ Bee Venom VENZ. It is a unique multi- component complex, which contains about 30 biologically active compounds. The main components are peptides: melittin, apamin, peptide 401, adolapin, and protease inhibitors. Bee venom support the immune system in health condition and contribute production of endogenous cortisol in the adrenal glands, which protect body from unfavourable environmental factors and provide joint mobility support. Third ingredient is Glucosamine HCL. Glucosamine is a major component of soft tissues such as cartilage, ligament, tendon, skin etc. Glucosamine is produced in the body from glucose and an amino acid, glutamine. It stimulates the manufacture of the soft tissue, as well as promoting the incorporation of sulphur into the tissue, and is therefore responsible for both the manufacture and proper function of joints and tissue such as ligaments, tendons and cartilage. Product Origin: New Zealand Origin Packed size: 250g, 500g
Total Moisture : 18% Inherent Moisture : 12% Ash Contens : 10% Volatile Matter : 36% - 40% Fixed carbon : 40% - 45% Total sulphur : 1.0% (MAX) ADB : ARB : 4.200 to 5.500 GC : Ash Melting Poin : AMP : >1250 Hard Grove Indx : 42- 50 Size : 90 Quantities : 100.000 MT Contract : (1) one year Spesification Basis Result Unit Test Mode Mercury Dried Basis 0,3 UG/G GB/T 16659 - 2008 Arsenic Dried Basis 1,8 UG/G GB/T 16659 - 2008 Fluorine Dried Basis 4.1 UG/G GB/T 4633- 2014 Phosphorus Dried Basis 0.008 % GB/T 216 - 2003 Chlorine Dried Basis 0.008 % GB/T 3358 - 2014 We would like to convey a coal payment scheme as a form of our reply to the LOI, that your company sent. Where the coal payment scheme can be done in the following ways : 1.Basic price CFR (ICI + Freight Cost ) 2.Contract 100.000 MT/Month ( 2 x Shipment 50.000 MT) 3.Payment terms : 10% LC at sight, 90% TT RTGS II. PAYMENT METHODE 1.The buyer must place 100% of the purchase value in the account of the buyer's company name in preparation for payment at DBS Bank or Prime International Bank. 2. Before the vessel departs, the buyer issues LC 10% of the value of the price I Vessel must be released, the first vessel departs the buyer does not need to transfer ,after the second vessel departs and enters the port area of your Port, The buyer transfer the RTGS in the amount of 90% of the contract value. If you agree with system the offer from our company PT.Malinau Berkat Sejahtera , please send a DRAFT CONTRACT to our company email address above and our company PT.Malinau Berkat Sejahtera will prepare a purchase request related to all mining seller documents of PT.Malinau Berkat Sejahtera to the buyer copany
Products Offered At Best Possible Price : CIF Aviation Kerosene Colonial Grade 54 Jet Fuel (JP54) Aviation Kerosene Colonial Grade Jet A1 Fuel (JET A1) Russian D2 Diesel Gas Oil L-0.2-62 GOST 305-82 RUSSIAN MAZUT M100 GOST 10585-75 Russian Mazut M100 Gost 10585-99 Russian Hsd2 (high Speed Diesel) 50ppm Russian D6 Virigin Fuel Oil Russia Export BLEND CRUDE OIL (REBCO) GOST 51 858-2002 [R.E.B.C.O.] Russian Export Blend Crude Gost 9965-76 [r.e.b.c.o] Russian Hsd2 Gas Oil L-0.2-62 Gost 305-82 Ago (automative Gas Oil) Russian LIQUEFIELD PETROLEUM GAS (PROPANE (C3H8) 50%+ BUTANE (C4H10) LPG RUSSIAN LIQUEFIELD NATURAL GAS 5542-87 (LNG) Russian Bitumen:40/50.60/70&80/100/ Peiroleum Asphalt Russian UREA N46% GRANULAR RUSSIAN CST-180 FUEL OIL DIESEL EN 590 10 PPM; EURO 5, Euro4 Russian Super Gasoline 91 Ron (unl) 93, 89, 95 Octane Russian Base Oil Sn.150, Sn 100, Sn 300, Sn 500 Petroleum Coke (russian Origin) Sulphur Urea Granular (russdian Origin) Light Crude Oil
Organic cane sugar is unrefined sugar minus the cancer-causing and environmentally damaging pesticides present in conventionally-grown sugarcane. Compared to white sugar, organic cane sugar has the full-bodied taste of sugarcane and is much less processed, retaining a lot of the nutrients present in cane juice. Unrefined cane sugar contains 17 amino acids, 11 minerals and 6 vitamins, including antioxidants, that may help reverse oxidative damage. It is made up of sucrose, fructose and glucose. Table sugar is just sucrose and calories, plus traces of chemicals utilized in the refining process such as lime, sulphur dioxide and phosphoric acid. Organic cane sugar is not like brown sugar, which is white sugar with molasses thrown back in. The light color of organic cane sugar is comparable to turbinado or raw sugar, a sign that it is less processed compared to other wholesome sweeteners such as muscovado and molasses. Spec : - Crystal Form - Unrefined - Shelf life 2 years - IU 500 - Certified of LOW-GI 55 - MOQ : FCL 20ft - Packing : As per buyers' requirement - Port Of Loading : Tanjung Emas, Semarang - Price : Start from USD1000 ( ExWork) Delivery Terms : FOB/CNF/CIF Payment terms: - (T/T) : 80% after signing contract, rest of that after release Bill Of Lading - (L/C) : Full Irrevocable at sight against Bill Of Lading - Product Model And Origin Brand: According to Buyer Requirement Seller Code: 04. brown sugar caneHS Code: 170290 - Competitive Advantages Pure organic Low-gi 55 We accepts orders for oem private labels - Other Details Dark to light brown color Shelf life : 2 years Unrefined
We supplying wide range of Lab Chemicals. Acetic Acid EP / Acetone / Ammonia Buffer SOLUTION / Ammoniun purpurate / Amyl alcohol/Antimony tri chloride AR / Barium chloride UR/Bromine UR/Bromophenol blue AR / Bromothymol blue / Carbon disulphide UR / Chloroform / Diethyl ether / Diethylamine / Dry methanol AR / EDTA UR / Ferrous ammonium sulphate AR / Ethylene glycole / Ferroin solution AR / Furfuraldehyde / Hydrochloric Acid / Iodine monochloride / Karl fisher reagent AR / Liquid Paraffin light / mercuric acitate / mercuric sulphate / methyl orange SOLUTION / methyl red SOLUTION/ methylene blue MS / n-Heptan UR / Nitric acid / Petrolium Ether / phenol red IND AR / phenolphthalein POWDER / PH-Indicator SOLUTION / phloroglucinol ARANHYDRUS / potassium chloride AR / potassium chromate AR / potassium dichromate / potassium hydroxideFLAKES / Potassium iodide AR / potassium permangnate AR / silver nitrate AR / silver sulphate / sodium azide UR / sodium chloride ARsodium chlorite / sodium hydroxide PELLETS AR / Sodium iodide UR / Sodium meta periodate UR / sodium sulphate AR / sodium thiosulphate AR / Solochrome black T / Eriochrome AR IND / stannous chloride UR / Starch SOLUBLE (POTATO) AR / sulpher DIOXIDE SOLUTION AR / Sulphuric Acid / Thymol blue IND. AR / Thymolphthalein (PH IND AR)
Product Name Native Potato starch Grade Food grade, Country of Origin INDIA Final Description Potato starch is produced in mechanical process of separating starch from whole potatoes and drying process. It is intended for application purpose in food and pharma. Organoleptic Requirement Apperance Texture Free flowing fine powder Colour Pure White, Approx 94% whiteness Aroma Typical, no foreign aroma Flavour Typical, no foreign flavour Viscosity Minimum 1280BU Physical Chemical requirement Moisture content not more than 20%(M/M) Ph Content 5 to 8 ph Ash content no more than 0.25% Particle size 100% below 150 �¼m Sulphur Di oxide content No more than 10mg/Kg Metal Content Arsenic No more than .10mg/kg Cadnium No more than .10mg/kg Lead No more than .10mg/kg mercury No more than .05mg/kg Microbiological Requirement Total Plate Count No more than 1000 in 1g Total Yeast count No more than 100 in 1 g Total Mould count No more than 500 in 1g Escherichia Coli Absent in 1g Salmonella Bacteria Absence in 25 g Other Requirement List of Ingredient ONLY Potato Starch Packaging Type 25 kg HDPE with food grade Liner of 250 micron Storage Condition Keep in dry place, DRY FRESH & AIRY ROOM, FREE from foreign Scents Best by Date Potato starch is stored in original packaging in conditions complaint with specifications retain its qualities for the period of 2 years. Batch Number Identified by the date and shift designation must be labelled on bags. Transport Requirement Use clean and dry mode of transport that will protect the packaging against damage and getting wet. The product is not classified as hazardous and does not required high safety mode of transport.
Coke is a kind of main raw materials used for steel makers, with the advantages of low ash, low sulphur and high carbon. Our coke is well sold in European, American, Japanese and South-east Asian markets. Coke obtained from high temperature coking is used for blast furnace smelting, casting and gasification. Coke produced in the process of recovery, purification of coke oven gas is both high calorific value of fuel, but also an important organic synthesis of industrial raw materials. Name F.C. % S % Ash % V.M. % Moisture % min max NF-MC-01 83.5 0.8 13.5 1.8 7 NF-MC-02 86 0.65 12 1.2 5 NF-MC-03 86.5 0.6 12 1.5 5 NF-MC-04 88 1 10.5 1 5 NF-MC-05 85 0.6 12 1.5 5 NF-MC-06 85 0.7 13.5 1.7 6 NF-MC-07 84 1.3 13.5 2 5 NF-MC-08 85 0.8 13.5 1.5 5 NF-MC-09 85 1 13 1.5 6 NF-MC-10 86 0.7 12 1.5 5 Size (mm) 0-1,1-3 mm, 0-5 mm, 1-5 mm, 0-10 mm, 5-10 mm, 5-15 mm,10-15 mm, 10-30mm or at customers' option. RE Other specifications and sizes can be designed as per your requirement, if you need, don't hesitate to contact us. Application Coke is mainly used for blast furnace ironmaking and for the copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal blast furnace smelting, from the reducing agent, heaters and column skeleton role.
PORTLAND 32.5 R-N CEMENT, PORTLAND 42.5 R-N CEMENT, PORTLAND 52.5 R-N CEMENT, CLINKER (BULK/50 KG BAGS) Our company is the world leader in cement trading and able to supply 4.000.000 metric tons of cement per month. The main distinction of our company is a permanent and meaningful improvement of technological processes, reliability and efficiency of delivery. Individual approach to each customer allows us to find the most effective scheme of co-operation. We do not want to aim at one or two good deals for us, without taking into account the interests of our partners. Our target is a long-term and mutually beneficial co-operation. Our company has also the SABS certificate. The countries of origin are: Russia, Ukraine, Bulgaria, Romania, Turkey, Mexico, Brazil. Chemical Analysis Unit Control Range Typical SILICON DIOXIDE (SiO2) % 20.8 23 21 ALUMINIUM AXIDE (Al2O3) % 4.5 6.0 5.30 FERRIC OXIDE (Fe2O3) % 3.1 6.0 3.30 CALCIUM OXIDE (Cao) % 64 - 68 65.60 MAGNESIUM OXIDE (Mgo) % 1.0 5.0 1.10 SULPHUR TRIOXIDE (SO3) % 2.7 3.0 2.70 LOS OF IGNITION (Loi) % 1.0 3.0 1.90 INSOLUBLE RESIDUE % 0.1 0.7 0.4 TRICALCIUM SILICATE (C3S) % 50.0 64.4 60 DICALCIUM SILICATE (C2S) % 14.2 18.2 15 TRICALCIUM ALUMINATE (C3A) % 6.0 9.5 8.05 TRIC. ALUMINO FERRICE (C4Af) % 10.5 12.0 9.76 CHROMIUS ES. (CR6) AT LEST FOR A 6 MONTHS PERIOD % < 2ppm
