We are ready to offer you high-quality glued beams and structural beams made of spruce and pine in various sizes. Thickness from 100 to 250 mm, width from 160 to 400 mm, length up to 12 meters. Price starts from $ 480 per m3. In addition, we can offer furniture boards made of pine grade O/O, O / B, A/B with a thickness of 18 and 40 mm. Price starts from$ 490 per m3. Volume from 45 to 1000 m3. FOB Kirov region, Russia. Worldwide delivery is possible.
Furniture, timber wood, pallets Onions, garlic, onion powder, garlic powder, dried green onions Dried cabbage, dried carrots Seaweed powder
Sawn timber: Pine, Spruce, oak, maple, ash, beech... F/jointed floor (furniture boards) Pine, Spruce shavings wood
LVL Laminated Veneer Lumber for construction, packaging, furniture and other industry with high quality made from Leloi Global factory. We produce and supply many kind of LVL as: LVL Structural Timber LVL for furniture parts. LVL for packing. Above products are different to each other, from the quality to the price as well. We specially use all A grade local wood veneer for this product. Vietnam local wood species which made LVL look bright white and eye catching.
Formwork H20 Timber Beam (Wood Girder) A) Flange: pine LVL flange and solid sawn pine lumber flange B) Pine plywood web. C) WBP phenolic resin D) Painting on the surface of flange and web: with yellow, waterproof, fireproof, rot-proof and frozen-proof painting, and the painting is environment friendly, meeting the environmental protection request Formwork H20 Timber Beam (Wood Girder) A) Flange: pine LVL flange and solid sawn pine lumber flange B) Pine plywood web. C) WBP phenolic resin D) Painting on the surface of flange and web: with yellow, waterproof, fireproof, rot-proof and frozen-proof painting, and the painting is environment friendly, meeting the environmental protection request
Origin: ukraine 2. Grade: 1, 2, 3 3. Length (cm): 2+ 4. Timber type: pine and spruce Humidity 10-30% Products type: Pine/spruce board Pine/spruce timber Log Firewood Freshly sawn Impregnation antiseptic Delivery condition: cif, cfr, fob We can produce any size, diametr, lenght and other.
Iron Trunks Set of 2 pcs
Spruce timber - commonly also known under its latin name "Picea Abies" is widely distributed throughout continental Europe and is a timber tree of major economic importance. The large tree usually has a straight, cylindrical trunk and growns to a height of about 30 m (up to 55 m), with a large diameter of about 60 cm (up to 1,5m). Big sizes - beams: Thickness - from 100 up to 300 mm Width - from 100 up to 300 mm Length - 3000/4000/5000 mm Small size - beams: Thickness - from 40 up to 95 mm Width - from 60 up to 95 mm Length - 3000/4000/5000 mm Boards: Thickness - from 18 up to 50 mm Width - from 50 up to 250 mm Length - 3000/4000/5000 mm
Pine timber - also referred to redwood timber, commonly also known under its latin name "Pinus Sylvetris" is the most widely spread in the East European Countries. The tree is generally 30m high with a diameter of about 1m but larger trees may be found on favorable sites. Big sizes - beams Thickness - from 100 mm up to 300 mm Width - from 100 mm up to 300 mm Length - from 3000 mm up to 5400 mm Small sizes - beams Thickness - from 40 mm up to 95 mm Width - from 60 mm up to 95 mm Length - from 3000 mm up to 5400 mm Boards Big sizes - beams Thickness - from 20 mm up to 50 mm Width - from 50 mm up to 200 mm Length - from 3000 mm up to 5400 mm
Beech timber - commonly also known under its Latin name "Fagus sylvatica" is the one most widely spread in the Romanian Carpathian Mountains, belonging thus to the only unpolluted forest area in Europe. TASS - SUPER SHORT Thickness - 25/32/38/50 mm Width - from 80 mm and wider Length - from 300 mm till 900 mm TAS - SHORT Thickness - 25/32/38/50 mm Width - from 100 mm and wider Length - from 1000 mm till 2000 mm TAL - LONG Thickness - 25/32/38/50 mm Width - from 120 mm and wider Length - from 2100 mm and longer
Quality Timber BEECH ROUND LOGS / Oak Wood Logs / Eucalyptus Logs Teak Wood - Round Logs, Sawn Timber Logs 1) OUR LOGS ARE FRESH CUT STRAIGHT LOGS 2) THE LOGS ARE FUMIGATED BEFORE SHIPMENT 3) LOGS CAN BE SHIPPED WITH BACK AND CAN ALSO BE DEBACKED DEPENDING ON THE CUSTOMER 4) MOISTURE CONTENT IS 30-45% BUT CAN BE DRIED ACCORDING TO CUSTOMERS REQUIREMENTS 5) DIAMETER OF LOGS FROM 20CM ANDABOVE 6) LENGTH OF THE LOGS FROM 1M AND ABOVE ACCORDING TO THE BUYERS REQUIREMENTS 7) THE LOGS ARE SHIPPED WOTHOUT CRACK AT THE ENDS. THEY ARE ALSO PROTECTED WITH GANG NAILS TO PREVENT SPLITING. 8) WE CAN SUPPLY ACORDING TO BUYERS REQUIREMENTS
We are suppliers of raw and sawn timber from Cameroon as IROKO, Sapelli, PADOUK, Bubinga, Sipo, Maobi, Okan, Tali, Tola, Zebra, Teak, Mahogany, Tioma, Azobe, Bosse, Foga, Bibolo, FRAKE We offer a wide selection of pine, oak, poplar, etc. wood for the production of pallets: freshly sawn; dried; thermal treatment; with anti-mould treatment; boards with Pads: 90mm x 90mm x 90mm Desk: 1200mm x 90mm x 18mm Desk: 1200mm x 80mm x 18mm Desk: 1000mm x 90mm x 20mm Classification system: European - French CTBA classification rules 3A quality The description of Pallet boards elements Other dimensions available on request. Length: 1000mm, 1500mm, 2000mm, 3000mm, 4000mm, 6000mm Thickness: 16mm, 19mm, 22mm, 32mm, 47mm, 50mm, 63mm, 75mm, 100mm Width: 75mm, 100mm, 115mm, 125mm, 150mm, 175mm, 200mm, 215mm, 225mm, 250mm Materials: Radiata Pine (New Zealand, Argentina, Chile etc). Mongolian Scotch Pine (Pinus sylvestris), White Pine (Chinese Northeast) Grade: AA: No knots, blue spot or black line on both face and back), AB: One side has no knots and some knots on the other side, CC: Both sides have knots Colour: Natural wood color or carbonization Certificate: FSC, ISO, Phytosanitary Certificate, Fumigation Certificate etc. Thickness: customer's requirements Moisture Content: Customer Request
Botanical Name: Intsia Bijuga Also known as Kwila, Ipil, Vesi, Johnstone River Teak or Scrub Mahogany The wood grain is variable but usually interlocked or wavy, which produces a ribbon figure on the radial surface. The timber has a coarse but even texture. It has a characteristic oily odour when cut. Once cut, the heartwood will initially appear as yellowish-brown or orange-brown before deepening to a pale to dark reddish brown. Merbau is a versatile wood product. It is utilized for larger-scale projects and general construction, along with common use for outdoor settings and barbeque trolleys, and for joinery, flooring and fitting purposes. As it turns well and responds to hand tools it can be applied to more specialized work, such as cabinet making, musical instruments, boat building, carving and tool handles
Botanical Name: Shorea spp. Also known as Yellow Balau, Balau Kuning, Selagan Batu Native to Malaysia, Indonesia and the Philippines, Bangkirai is a dense hardwood used mainly for heavy construction. The heartwood of Bangkirai is yellow to brown, which is distinct from the paler sapwood. Its moderately fine and even texture presents and interlocked grain, which produces a stripe figure on the radial surface. Bangkirai is also susceptible to pinhole borer damage. In relation to its density, Bangkirai is relatively easy to work. It does not contain sillica, however resin pockets may be present, meaning resin can build up on cutting equipment. Pre-drilling is advisable when nailing. Bangkirai can be painted, stained and polished but is not suitable for steam bending.