Wanted : Heavy Duty Electric Truck Suppliers and Manufacturers

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation

Fuel oil is any of various fractions obtained from the distillation of petroleum (crude oil). Such oils include distillates (the lighter fractions) and residues (the heavier fractions). Fuel oils include heavy fuel oil (bunker fuel), marine fuel oil (MFO), furnace oil (FO), gas oil (gas oil), heating oils (such as home heating oil), diesel fuel and others. Fuel oil has many uses; it heats homes and businesses and fuels trucks, ships, and some cars. It is often used as a backup fuel for peaking power plants in case the supply of natural gas is interrupted or as the main fuel for small electrical generators.

Input Voltage 12V / 24V DC optional Output Voltage 115V / 230V AC optional Portable power for AC products, AC outlets for connecting multiple loads High surge capacity for products that require more power to start High efficiency converts virtually all of the battery's power to AC Mounting brackets for convenient installation Heavy duty stud-connection mounting RS232 communication port WIFI/BMS Optional Overload and over temperature shut down Low voltage and over voltage alarm/cut off Input reverse protection Short circuit protection PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter, outdoor electricity and other occasions.

7 Inch Hub Axle Rod Heavy Duty with BNP CLR Bolt 45 INR/Piece Product Details: Product Type : Hub Axle Rod Heavy Duty with BNP CLR Bolt Size : 7 inch Color : Black Usage : Used to provide the power to the wheels in order to rotate Use Automobile Industry 7 Inch Hub Axle Rod Heavy Duty with BNP CLR Bolt Price And Quantity Price 45 INR/Piece

Baby Cradle Product Code: MEF6063 Description Frame made of strong and precise CRCA Pipe with hanging hook for cradle. Cradle made of strong and heavy Steel Wire framed with CRCA Pipe with hanging clamp. Mounted on heavy duty PVC stumps. Provided with 2 inches/50 mm thick PU foam sheet covered with Heavy Duty Long Lasting Rexene. Finish: Pre-treated and Epoxy Powder Coated.

Over Bed Table With Adjustable Height Product Code: MEF6030 Description Laminated board top fitted on heavy tubular steel frame mounted on 5cm. Swivel castors. Height adjustable sliding pipe made of heavy duty stainless steel and maneuverable by knob. Finish: pre-treated and epoxy powder coated.

Electrically Foot Operated Heavy Mild Steel base with Fiber wheels provide stability to Entire Table. Auto Floor locking device

Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at Affordable Prices Buy electric motor scraps scrap electric motors Electric motor scrap Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at cheap price electric moto scrap for sale electric motor scrap Dear buyers here are a list of our product which we supply Electric Motor Scrap,AC fridge compressor scrap,Alternator Scrap,Starters scrap with 100% copper wind.We collect locally from our small We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment. Our Company is a prestigious company with a good reputation to suite all customer`s across the world and we look forward to providing good quality products and we will offer at very good price as our prices are 100% NEGOTIABLE. Operating conditions: Ambient temperature: -15?C

Autoclave Pressure cooker type, Mirror Finish, Non-Electric (External Fuel Heated), Capacity 40 Ltrs Specifications: It uses steam to sterilize medical equipment, surgical dressings, glass, utensils, etc. rapidly and efficiently. Made of heavy duty seamless aluminum sheet. Long lasting. The lid is equipped with both a safety valve and steam release valve. A pressure gauge allow precise pressure tracking and safety. Mirror Finish. External Fuel Heated. Perfect for hospitals, public health centers, health stations, clinics, and research institutes. Size (D x H) : 350mm X 330mm + 90mm Lid. (14x16). Approximate Capacity (Ltrs.) : 40 Liters. With lid. Finish : Mirror Finish. Suitable for two Sterilizing / Dressing Drum (11x9) & (11x4.5) (Drum Not Included Drum Cost is Extra). Supplied with inner & outer stand. OPERATING INSTRUCTION / INSTRUCTION MANUAL : PASTED ON THE AUTOCLAVE. All aluminum deep-drawn seamless construction Mirror Finish. External Fuel Heated Supplied with inner & outer stand. All autoclaves are constructed from heavy gauge aluminum. It generates steam under pressure and temperature between 120C to 135C. Made from seamless Aluminium, top-loading autoclaves. Seamless construction ensures a bacteria-free environment, 25-30 minutes sterilizing cycle at 121c. With two stages overpressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve. With heat-resistant handles and steam release/control valve. Pressure Gauge: Color-coded pressure gauge showing internal chamber conditions during the cycle. The sterilization zone in green color is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121c to 127c. Dial size- 2.5?,Dial show measurement in 2 units (i) kg/cm² (ii) lb/inch². Full scale dial of pressure gauge is 0-30 lb/ inch or 0-2 kg/ cm. Caution zone in red color.

High quality heavy duty trolley specially made for jumbo cylinders for transporting and standing. Two strong 6 inches wheels provided in the back and special handle provided on the top to easy movements of cylinders. Made of strong and precise steel tubes/pipes with heavy base made of steel flats. Finish: pre-treated and epoxy powder coated

Obstetric Telescopic Labour Table/Bed Product Code: MEF6041 Description Two section top with head section adjustable on ratchet. Made of crca sheet and pipes. Lithotomy leg holders with straps provided at leg end. Iv rod made of stainless steel provided at the head end. Provided with 50 m.m thick high density special pu foam mattress all side covered with high quality heavy duty raxine. Finish: pretreated and epoxy powder coated.

Gyn. /Obstetric Examination Table Product Code: MEF6038 Description Two section top with head section adjustable on ratchet. Made of crca sheet and pipes. Lithotomy leg holders with straps provided at leg end. Iv rod made of stainless steel provided at the head end. Provided with 50 m.m thick high density special pu foam mattress all side covered with high quality heavy duty raxine. Finish: pretreated and epoxy powder coated.

Fowler Bed Mechanical Product Code: MEF6008 Description Frame made of strong rectangular CRCA pipe mounted on â??Hâ?? type legs. Four section top of perforated CRCA sheets. Back-rest, knee-rest positions obtained by Crank Mechanism at foot end with separates handles. Head & foot Panels made of Laminated Board fitted with Stainless Steel Pipe Frame. Bed Mounted on Heavy Duty PVC Stumps. Provision for Stainless Steel I.V. Rod with foldable Four I.V hooks on four locations. Pre-Treated and Epoxy Powder Coated. Size: 2200 mm x 1000 mm x 600-800 mm (LxWxH)

Baby Resuscitation Trolley Product Code: MEF6052 Description Specially designed resuscitation trolley made of Strong and Precise CRCA Sheet and Pipe Frame. Tilting Top with Four Side Fixed Railings for Trendlenberg and reverse Trendlenberg positions maneuverable by knob. Provision for Lamp at one side of the trolley is provided. Stainless Steel IV Rod is provided at the head end of the trolley. Mounted on 4â?? strong PU Swivel Castors Two with Brakes. Provided with 2 inches/50 mm thick PU foam sheet covered with Heavy Duty Long Lasting Rexene. Finish: Pre-treated and Epoxy Powder Coated.

Plug & Play: E.FOR.U 800 Watt Solar Balcony Power Plant is the perfect solution for anyone who wants to generate electricity in an environmentally friendly and sustainable way. It is easy to install and can be connected in a few minutes. Solar panels: The solar panels have a total output of 800W (2x400W) and come with a 12-year product warranty and a 25-year performance warranty. Thanks to the 210mm PERC cells, the module efficiency is 20.81%. You can generate a lot of green electricity if you set up the system in a sunny location. Inverter: The Deye inverter has a peak power of 600W. You can save up to â?¬327.60 annually on electricity costs. The product has a warranty of 10 years. Smart monitoring: Through the inverter's WiFi function, you can use the SOLARMAN APP to intelligently monitor and record your system. This gives you real-time information about the amount of electricity generated. German company: We are a local company in Germany and deliver by freight forwarder with a fast shipping of 3-5 days. Our experienced staff will be happy to advise you before and after your purchase and will be available to answer any questions you may have.

Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Chemical Composition: C:0.06 â?? 0.082% Mn:0.75 â?? 1.05% SI:0.13 â?? 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%