Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Agro products like pepper, cinnamon, ginger, turmeric, rice, animal feed, tapioca starch, corn starch, cashew, mosquito coils, incense stick, coconut shell charcoal, active carbon charcoal, hard wood charcoal, wooden pallet, sawdust charcoal, kaolin, gypsum.Manufacturer, importing and exporting
Introduction: The coco peat is extracted from the shell of the coconut consisting of the coir fiber and the coir dust. These are natural material used for many purposes from agriculture and industry. Advantages: - Help improve the fallow conditions as well as the calluses from the soil - Helps soil to retain more nutrients and retain moisture. - Helps increase soil ventilation -Furthermore, they will promote full root development and plant growth - Contains natural organic matter and is good for soil and plants - No harm to the environment.
Premium and high quality agriproducts like bold peanuts, java peanuts, peanuts in shell roasted peanuts, peanuts, blanched peanuts, red skin peanut, fresh onion red, fresh onion white, dehydrated onion kibbled, red dehydrated onion flakes, red dehydrated onion powder, red dehydrated onion granules, white onion kibbled, white onion flakes, white onion granules , white onion powder, dry red chilli teja s 17,dry red chilli sannam/334/s4 , 355 byadgi, 5531 syngenta.
Product name: Peanut Hulls HS Code: 1202420000 Peanut hulls are the outermost shell of the peanut and can be obtained as a low-cost by-product from the food processing industry. Peanut hulls are cheap. Applications: Horse feed / Camel feed / Cattle feed If you love peanuts but have always thrown away the shells, you've been wasting a valuable resource. Peanut shells are used in the manufacture of soap, cosmetics, wallboard, plastics, and linoleum, among other things. Peanut shells are great for mulching. They are a terrific source of nitrogen, phosphorus, and potassium. Peanut shells, or hulls, have a hard texture similar to wood chips. The shells take a long time to decompose, which makes them useful as a protective layer, as mulch, and as a fertilizer, which will decompose to benefit plant growth. We could supply in Jumbo bags in Bulk Containers at very cheap $ Contact Us Now to get your offer
Alfalfa Pellets Thank you for contacting us. We can offer best quality Alfalfa Pellets. Further, this is a 100% Natural Product grown and cultivated in Gujarat State of India, the nutritional specifications are subject to vary as no additions of foreign matters are made to increase/control the nutritional specification of the same. Available In : 8 x 25 mm We produce widest range of Alfalfa Pellets for Animal Feeding Objective. We produce 8� mm Alfalfa Pellet and 10� mm Alfalfa Pellet for Animal Feed Forage Industry Alfalfa Pelleting Process Generally its grown during the period of November to April Months of the year in India and the cutting process begins from the 45th� day of the plantation. The field cut green alfalfa is spread on the agriculture land for sun drying process (which is generally called sun curing process). This is the most important phase of administration, wherein during the sun curing process the alfalfa leaves and stem has to be dried in such a manner that the leaves should not turn yellow or loose green pigments. After 7 days of meticulous administration, the green alfalfa is converted in to hay. The hay is loaded in trucks and transported to production side, where the first stage is to sieve (clean) the entire hay, so minor or major dust articles are removed from the same. After cleaning process the hard stem particles are removed through a mechanical machining process and the available residue is absolutely clean and dehydrated soft leaves and soft steam. The dehydrated alfalfa particles (leaves & steam) are grinded to a finer particles size. The overall texture of hay is now converted to Powder Form. The powdered alfalfa is then passed through 100 degree Celsius stream for about 8 minutes, which detoxifies the alfalfa from any toxic elements and also gets cooked at a very digestible ratio. The highly cooked alfalfa meal is then pelleted through feed extrusion methodology, during the process of pelleting again the cooked meal reaches to an extremely high temperature of 123 Degree Celsius, due mechanical thrust of the extruder in its 22 ft long barrel The extremely hot pellets are then cooled down to a room temperature level, enabling the moisture level below 12%. The above process produces the most advance format of Alfalfa Hay Pellet in 8 x 25 mm� and 6 x 25 mm size absolutely hygienic for Animal and Poultry feeding Purpose Facts of Indian Alfalfa The pricing of the alfalfa hay / pellet is totally dependent of the physical hay recovery after sun curing process, which varies 10% to 15%, which means when 100 Kgs of green alfalfa is sun dried, the hay recovery varies between 10Kgs to 15 Kgs. The recoveries are totally dependent on the environmental factor and the water content within the stems of the alfalfa. Countries like Canada, Northern US, New Zealand and Northern European Countries donâ??t get direct sun light (rather they get inclined sun lig
We are amongst the renowned manufacturer, supplier, distributor, exporter and wholesaler of premium quality range of Dry Fodder. These dry fodders we are offering are highly demanded by our clientele as excellent feed for its premium quality and excellent nutrition contents for growing farm animals. Our dry fodders are carefully processed using best quality materials mixed with essential nutrients for healthy livestock.� Our dry fodders are very easy to use, store and feed to the animals which they will surely enjoy. Feed Application:� Dry Animal Fodder is formulated to cater the routine dry matter requirement of Dairy Livestock, Equine, Camel, Pig, Goat, Sheep, Horse, Cattle etc. Feeding Pattern:� Dry Animal Fodder has to be given in ad libitum quantity and itâ??s recommended to be given in free choice feeding. Ingredients:� Wheat Straw, Grain Husk, Paddy Shell, Essential Amino Acids, Vitamins, Minerals with Micotoxin, Aflatoxin and Mold Binders Processed Dry Fodder (AFDF-010306) In general parlance the Dry Fodder or Dry Forage constitutes of Agricultural Hay, Husk, Straw and Pulp. The stated constituents are highly Volumetric Cargo from Transit Perspective, resulting to which the pricing inclines to the higher side. After extensive research activities, HAF has derived a new methodology of production to reduce the volume of the dry forages to a significant level. How the Dry Fodder is Produced? Stage-1: Different types of Agro Hay and Straws are passed through High Temperature Thermal Cooking. Wherein the dry forage is Moisturized and Cooked. Stage-2: Then after its powdered to smaller particle size. Stage-3: The Powdered Forage is Re-cooked at a comparatively lower temperature and finishing of the cooked forage is done. Stage-4: At post finishing stage, the forage is passed through High Compression Dryers to reduce the moisture level at below 10% Stage-5: After De-humidification, the material is passed through Surface Tension sewers to make the final material homogenous Stage-6: The homogenous material is packed in 39 Kgs PP Packing Benefits of Processed Dry Fodder Due to Complex Production Process, the availability of toxic contents in the forage is NIL. Absolutely Transit Friendly Cargo. In 20 FCL 550 Bags of 39 Kgs (21450Kgs) and 40 FCL 720 Bags of 39 Kgs (28080 Kgs) can be stuffed. The Processed Dry Fodder look like Bran, so feed wastage can be controlled. A quality forage in a Standard PP Packing. So no more Bales are required. Needs very less storage Area. Available Round the Year in whatever quantity required. Suitable For Cattle, Camel, Goat, Sheep, Horse and Pig. Reasonable Price for quality controlled product. Product Details :� Protein: 6 % Max Oil: 3.5 % Max Fiber: 37% to 40% Max Acid Insoluble Ash : 4.5% to 8.2 % Max Moisture: Less than 12% Foreign Matters: NIL Crop: Latest Cultivation Quality Grade : Grade-1 Mash Size / Pellet Size : 15 Mash or 8 MM Pellets GENERAL DETAILS Ingredie
Tapioca Residue Pellet : Tapioca residue is a by product of tapioca starch processing from cassava roots. Tapioca residue is often used to produce animal feed, organic fertilizer, ethanol Manufactured in pellets. Price of product ( USD price or FOB price) - Contact Product origin - Viet Nam Tapioca residue Tapioca residue pellet Starch: 50.10% Sand/Silica: 0.85% Raw fiber: 11.70% Moisture: 13.2 % Minimum Order Size and Packgaing details : Packing 50kg/bag, Minimum Order Quantity 20 feet container, 20 MT
Tapioca Residuce Powder: Price of product (USD price or FOB price) - Contact Product origin - Viet Nam Tapioca residue Tapioca residue pellet Starch : 50.10% Tapioca residue Tapioca residue powder Starch: 60% Moisture:13 % Ash: 1-1.5% Minimum Order Size and Packgaing details: Packing 50kg/bag, Minimum Order Quantity 20 feet container, 20 MT
Dried Sugarcane Bagasse: Price of product (USD price or FOB price) - Contact Product origin - Viet Nam Dried Sugarcane Bagasse Appearance: Cutting small size Starch: 24.50% min Sugar: 5% Fiber: 22% Minimum Order Size and Packgaing details: Packing 50kg/bag, Minimum Order Quantity 20 feet container, 20 MT