Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise.
Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise.
FD6.0-5KW Technical Parameter Power : 5KW Blade Diameter: 6.0m Material of the blades : Fiber glass-reinforced plastic Rated Rotor Speed: 220r/min Rated Speed: 10m/s Rated Power: 5KW Max Power: 6kw Output Voltage: 216v Start Up Wind Speed: 3(m/s) Work Speed: 3-20(m/s) Security Wind Speed: 40(m/s) Working Temperature : -40--+40 Height of Guy Cable Tower: 8m Top Quality Except Tower: 100kg Generator Style: 3-phase AC PM Output Controller System: Controller , Inverter Suggested Batteries and its Capacity: 18 PCS 12V 100AH CONTROLLER & DIVERTER: Model: WWS50A-220 Rated Wind Turbine Power: 5kW Rated Solar Power: 1.5kW Rated Battery Voltage: 220V Wind Turbine Maximum Input Current: 45A Wind Turbine Maximum Input Power: 10kW Unload Voltage factory default : 252 V Unload Current factory default : 25A Control Mode: PWM Display Mode: LCD Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current , PV Voltage, PV Charge Current, PV Power, Battery Voltage Working Temperature &Humidity: -20~+50 /35~85%RH Without Condensation Temperature Compensation (Optional : 4mV/ /2V ,¨C35 --+80 , Precision, 1 Communication Mode optional : RS232, RS485, RJ45, GPRS. Etc Protection Function: Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake. Model: WI50-220-S-B Rated Output Capacity : 5kVA Rated Battery Voltage : 216VDC Over Voltage Shutoff: 306VDC Over Voltage Recovery: 297VDC Under Voltage Shutoff: 189VDC Under Voltage Recovery: 216VDC No Load Loss: 0.1A Output Wave Form: Pure Sine Wave Display Mode: LCD Display Parameters: Battery Voltage, Output Voltage, Status parameters Cooling Mode: Fan Rated Output Voltage: 110/120/220/230/240VAC Wave Distortion: 4£¥ Output Frequency: 50/60 Hz0.05Hz Dynamic Response: 5% Overload Capacity: 120% 1min,150% 10s Inverter Efficiency: Maximum 90% Noise 1m : 40dB Insulating Strength: 1500VAC,1min Protection Function: Battery over voltage protection, Battery under voltage protection, Battery reverse connection protection, Output overload protection, Output short circuit protection, Overheating protection. Working Ambient Temperature: -20¡«50 Working Altitude: 4000m Working Ambient Humidity: 0~90%, no condensing. In plywood.
FD8.0-10KW Technical Parameter: Power : 10KW Blade Diameter: 8.0m Rated Rotor Speed: 160r/min Rated Speed: 10m/s Rated Power: 10KW Max Power: 14kw Output Voltage: 380v Start Up Wind Speed: 3(m/s) Work Speed: 3-20(m/s) Security Wind Speed: 40(m/s) Working Temperature : -40--+40 Height of Guy Cable Tower: 12m Generator Style: 3-phase AC PM Output Controller System: Controller , Inverter Suggested Batteries and its Capacity: 30pcs 12v 200AH. Can Supply Power for: Small Village,Air-Condition, Refrigerator, Washing Machine,Water Pump, Electric Pan, Color TV, Lighter, Fanner, Charger. Controller & inverter: Model: WWS100A-220 Rated Wind Turbine Power: 10kW Rated Solar Power: 3kW Rated Battery Voltage: 220V Wind Turbine Maximum Input Current: 90A Wind Turbine Maximum Input Power: 20KW Unload Voltage factory default : 252 V Unload Current factory default : 40A Control Mode: PWM Display Mode: LCD Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current , PV Voltage, PV Charge Current, PV Power, Battery Voltage Working Temperature &Humidity: -20~+50 /35~85%RH Without Condensation Temperature Compensation optional : 4mV/ /2V , 35 --+80 , Precision 1 Communication Mode optional : RS232, RS485, RJ45, GPRS. Etc Protection Function: Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake. Model: WI100-220-S Rated Output Capacity : 10kVA Rated Battery Voltage : 216VDC Over Voltage Shutoff: 306VDC Over Voltage Recovery: 297VDC Under Voltage Shutoff: 189VDC Under Voltage Recovery: 216VDC No Load Loss: 0.55A Output Wave Form: Pure Sine Wave Display Mode: LCD Display parameters: Battery Voltage, Output Voltage, Status parameters Cooling Mode: Fan Rated Output Voltage: 110/120/220/230/240VAC Wave Distortion: 4 Output Frequency: 50/60 Hz0.05Hz Dynamic Response: 5% Overload Capacity: 120% 1min,150% 10s Inverter Efficiency: Maximum 90% Noise 1m : 40dB Insulating Strength: 1500VAC,1min Protection Function: Battery over voltage protection, Battery under voltage protection, Battery reverse connection protection, Output overload protection, Output short circuit protection, Overheating protection. Working Ambient Temperature: -20¡«50 Working Altitude: 4000m Working Ambient Humidity: 0~90%, no condensing. in plywood.
FDV-1KW Technical Parameter: Power : 1KW Blade Height: 1.8m Material of the blades : Fiber glass-reinforced plastic Rated Wind Speed: 10m/s Cut-in Speed: 3m/s Cut-out Speed: 25m/s Security Wind Speed: 40m/s Output Voltage: 48v Working Temperature : -40--+40 Height of Guy Cable Tower: 6m Top Quality Except Tower: 120kg Generator Style: 3-phase AC PM Output Controller System: Controller , Inverter Suggested Batteries and its Capacity: 4PCS 12V100AH Can Supply Power for: Washing machine,Color TV, Lighter, Fanner, Charger 1KW OFF GRID QUOTATION. CONTROLLER & INVERTER: Model: WWS10A-48-B Rated Wind Turbine Power: 1kW Rated Solar Power: 300W Rated Battery Voltage: 48V Wind Turbine Maximum Input Current: 40A Wind Turbine Maximum Input Power: 2kW Unload Voltage factory default : 56V Unload Current factory default : 25A Control Mode: PWM Display Mode: LCD Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current, PV Voltage, PV Charge Current, PV Power, Battery Voltage. Working Temperature & Humidity: -20~+50/35~85%RH Without Condensation Temperature Compensation optional : 4mV//2V ,¨C35--+80 , Precision 1 Communication Mode optional : RS232, RS485, RJ45, GPRS. Etc Protection Function: Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake. Model: WI10-48-S Rated Output Capacity : 1kVA Rated Battery Voltage : 48 VDC Over Voltage Shutoff: 68VDC Over Voltage Recovery: 66VDC Under Voltage Shutoff: 42VDC Under Voltage Recovery: 48VDC No Load Loss: 0.35 A Output Wave Form: Pure Sine Wave Display Mode: LCD Display Parameters: Battery Voltage, Status parameters Cooling Mode: Fan Rated Output Voltage: 110/120/220/230/240VAC Wave Distortion: 4 Output Frequency: 50/60 Hz¡À0.05Hz Dynamic Response: 5% Overload Capacity: 120% 1min,150% 10s Inverter Efficiency: Maximum 90% Noise 1m : 40dB Insulating Strength: 1500VAC,1min Protection Function: Battery over voltage protection, Battery under voltage protection, Battery reverse connection protection, Output overload protection, Output short circuit protection, Overheating protection. Working Ambient Temperature: -20¡«50 Working Altitude: 4000m Working Ambient Humidity: 0~90%,no condensing. In plywood.
Product information Model: hummer wind turbine 2kw H-3.8-2kw wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. Application Well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Technical parameter Rated power(w) 2000 Maximum output power (w) 3200 Charging voltage (v) dc 120v Blade quantity 3 Rotor blade material grp Rotor blade diameter(m) 3.8 Start-up wind speed (m/s) 3.0 Rated wind speed (m/s) 9.0 Rated rotating rate (r/min) 450 Wind energy utilizing ratio (cp) 0.45 Generator output single-phase Frequency conversion ac Rated charging current (a) 15 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0-370 Generator efficiency >0.8 Tower diameter(mm)114*2000*5 Tower height(m) 10 The weight of generator(kg) 25 Battery 12v 150ah/200ah 10pcs Plywood container.
Hf3.2-1kw Blade diameter (m):3.2 Rated rotated speed(r/min): 400 Rated speed (m/s): 8 Rated power: 1kw Max power: 1.5kw Output voltage (v): 48 Start up wind speed (m/s): 3 Work speed (m/s):3-25 Security wind speed(m/s):50 High of tower (m): 6 Top weight except tower: 95kg Tower steel tube model (mm): 76 Capacity and quantity of battery: 12v100ah4 pcs Speed regulation: leaning tail and electric brake Can supply power for: Refrigerators, water pumps (350), color tv sets, washing machines, lighting, electric fans, charge 178kg
Hf2.0-150w Blade diameter (m): 2.0 Rated rotated speed(r/min):400 Rated speed (m/s):8 Rated power: 150w Max power: 250w Output voltage (v): 24/12 Start up wind speed (m/s):3 Work speed (m/s): 3-25 Security wind speed(m/s):50 High of tower (m): 6 Top weight except tower: 35kg Tower steel tube model (mm): 60 Speed regulation: leaning tail and electric brake Capacity and quantity of battery: 12v100ah1 pcs Life span: 20-25 years; Warranty: 1 year Can supply power for: color tv sets, electric fans, lighting, charge 93kg, 0.37cmb
Hf2.6-300w .Blade diameter (m): 2.6 .Rated rotated speed(r/min): 400 Rated speed (m/s): 8 .Rated power: 300w Max power: 400w Output voltage (v): 24/12 Start up wind speed (m/s): 3 Work speed (m/s): 3-25 Security wind speed(m/s):50 High of tower (m): 6 Top weight except tower: 56kg Tower steel tube model (mm): 60 .Speed regulation: leaning tail and electric brake Life span:20-25 years; Warranty:1 year Capacity and quantity of battery: 12v100ah 2 pcs Can supply power for: color tv sets, electric fans, lighting, charge 96kg
Hf2.8-600w Blade diameter (m): 2.8 Rated rotated speed(r/min): 400 Rated speed (m/s): 8 Rated power: 600w Max power: 1000w Output voltage (v): 24 Start up wind speed (m/s): 3 Work speed (m/s): 3-25 Security wind speed(m/s):50 High of tower (m): 6 Top weight except tower: 85kg Tower steel tube model (mm): 76 Speed regulation: leaning tail and electric brake Capacity and quantity of battery: 12v100ah2 pcs Can supply power for: color tv sets, washing machines, lighting, refrigerators 168kg
Hf2.2-200w .Blade diameter (m): 2.2 .Rated rotated speed(r/min): 400 Rated speed (m/s): 8 .Rated power: 200w Max power: 350w Output voltage (v): 24/12 Start up wind speed (m/s): 3 Work speed (m/s): 3-25 Security wind speed(m/s):50 High of tower (m): 6 Top weight except tower: 45kg Tower steel tube model (mm): 60 .Speed regulation: leaning tail and electric brake Life span:20-25 years; Warranty:1 year Capacity and quantity of battery: 12v100ah 2 pcs Can supply power for: color tv sets, electric fans, lighting, charge 93kg, 0.37cmb
Green energy---300w wind turbine Model number: fd2.6-300w Rotor blade diameter: 2.6m Number of blades: 3pcs Materials of blade: glass fiber Rated rotation speed: 400(r/m) Type of generator: permanent-magnet 3 phase ac Rated power: 300w Max power: 450w Output voltage: 12v/24v Cut-in wind velocity: 3(m/s) Working wind velocity: 3-25(m/s) Survival wind velocity: 40(m/s) Tower height: 6m Output controlling system: electrified controller & inverter Recommended batteries: 12v100ah, 2 pieces Can load: light, fan and charge and tv within 29 inch Authentication: ce and iso certificate Ce, iso
Green energy---50kw wind turbine Model number: fd18-50kw Rotor diameter: 18m Number of blades: 3pcs Material of blade: frp Rated rotation speed (r/m): 80 Type of the generator: permanent-mangnet 3 phrase ac Rated power: 50kw Max power : 55kw Output voltage: 380v Cut-in wind velocity: 3.5(m/s) Rated wind velocity: 13(m/s) Working wind velocity: 3.5-25(m/s) Survival wind velocity: 50(m/s) Tower height: 18m Main body weight (exclude tower): 1000kg Tower type: 400s. Tube Output controlling system: electrified controller inverter Life span : 15years Warranty: 1year Can load Light, fan, charger, tv, pump, washer, refrigerator, electric cooker, air conditioner, village power supply Authentication: ce and iso certificate Net weightú¦4674.00kg Gross weightú¦4870.00kg Volume : 10.265stere packing numberú¦ 8pieces packing : veneer box
Product description Wind turbine / wind power generator 1. Dual, automatic emergency braking system. 2. Unique anti-vibration design. 3. Waterproofing. 4. Unique anti-vibration design. 5. Efficient aero-dynamic design, compared with the vertical shaft, power utilization rate is greatly improved. 6. High strength, corrosion resisting aluminium alloy. 7. Unique permanent magnetic material generator, small size, light weight, power output is very high. 8. Low noise level. Model Nl-3kl-w Rated powe,3kw Rated voltage(dcv) 240v Rated voltage(dca) 17v Wind wheel diameter 4m Blade material Gfrp strengthening Blade numbe,3 Started wind speed 3.0m/s Rated wind speed 10 m/s Safety wind speed 40m/s Upwind method Upwind Rated rotating speed(rpm) 300 Tower height 9m Generato,Asynchronous Braking system Electronic magnet+manual Protection grade Ip55 Noise level ¡Ü55db Insulation class F Operation mode Automatic or manual Suggested battery capacity 12v 200ah 10pcs Efficiency 0.85
MPPT Solar charge controller Feature 1. We choose high speed and high performance 32-bit processor with excellent EMC design 2. Advanced MPPT tracking algorithm, the tracking efficiency more than 99% 3. High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly 4. Ultrafast maximum power point tracking speed to ensure tracking efficiency 5. Accurate identification and tracking of multi-peak maximum power points 6. With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. 7. Widely PV arraysâ?? voltage input, this can save the cost of PV combiner box, wires and construction 8. Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment 9. It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function 10. The perfect battery protection function and multi-stage charging improves battery life 11. It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. 12. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy 13. It can work with GEL. LEAD-ACID, LITHIUM and other type battery 14. Twice protection function to protect battery from damage when the power switch is down (optional) 15. Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stationsâ?? need, there are 48Vã??96Vã??120Vã??192Vã??220Vã??240Vã?? 360Vã??384Vã??480Vã??492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
We choose high speed and high performance 32-bit processor with excellent EMC design Advanced MPPT tracking algorithm, the tracking efficiency more than 99% High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly Ultrafast maximum power point tracking speed to ensure tracking efficiency Accurate identification and tracking of multi-peak maximum power points With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. Widely PV arrays voltage input, this can save the cost of PV combiner box, wires and construction Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function The perfect battery protection function and multi-stage charging improves battery life It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy It can work with GEL. LEAD-ACID, LITHIUM and other type battery Twice protection function to protect battery from damage when the power switch is down (optional) Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
Capacity - 10 Containers per month.