Acrylonitrile CAS Number C3H3N or H2C(CH)CN Formula 107-13-1 Acrylonitrile is a clear, colorless or pale-yellow liquid at room temperature with chemical formula H2C(CH)CN. It has a sweet, sharp odor like onion or garlic. It is soluble in water and is volatile in nature. Acrylonitrile is an important commercial chemical. SPECIFICATION Acrylonitrile 99.60 wt % Acetone 1 ppm Oxazole 1 ppm Acetonitrile 5 ppm Propionitrile 11 ppm Methyl acrylonitrile 15 ppm Acrolein 103 ppm Acidity (as Acetic acid) 8.8 ppm Aldehydes (as Acetaldehyde) 6 ppm HCN 1.2 ppm Copper 0.01 ppm Iron 0.01 ppm Water 0.39 wt.% Peroxides Less than 0.01 Appearance Clear Color (APHA) 10 APHA Inhibitor (MEHQ) 37 ppm Non-volatile matter (ppm mass) 56.0 Oxygen bomb stability (hours) More than 4 pH 6.8 Tritation Value (mL) Less than 0.5 MAJOR USE: In the manufacture of acrylic and modacrylic fibres for use in clothing and textiles, such as fleece jumpers, sportswear, carpets and upholstery. Acrylic fibres are also used as a precursor in the production of carbon fibre. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Isopropyl Alcohol CAS Number 67-63-0 Formula C3H8O Isopropyl alcohol is a secondary alcohol.it appears as volatile, colorless liquid with a sharp musty odor. Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform. SPECIFICATION Appearance Clear and Bright Platinum Cobalt Color 5 Pt/Co Water Content 0.037 % (m/m) Water Miscibility Pass Density at 20�°C 0.7851 g/cm3 Acidity (as Acetic Acid) 0.0005 % (m/m) Carbonyl Content (as CH3COCH3) 38.2 mg/kg Non-Volatile Matter < 0.001 %(m/m) Sulphur < 1 mg/Kg Purity 99.92 %(m/m) MAJOR USE: Rubbing-alcohol antiseptic, aftershave lotions, hand lotions, and other cosmetics. In industry it is used as an inexpensive solvent for cosmetics, shellacs, and gums, as well as for denaturing ethanol (ethyl alcohol). These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Ethylene Dichloride (EDC) CAS Number 107-06-2 Formula ClCH2CH2Cl or C2H4Cl2 Ethylene Dichloride is a clear, colorless, oily, synthetic, flammable liquid chlorinated hydrocarbon with a pleasant chloroform-like smell that emits toxic fumes of hydrochloric acid when heated to decomposition. It is miscible in methanol, diethyl ether, n-octanol, acetone, very slightly miscible in water. SPECIFICATION Acidity (as HCl) 1.67 ppm wt. Appearance Clear Liquid Color (APHA) 10 APHA Distillation Range 0.3C Iron 0.20 ppm wt. Density at 15C 1.2602 g/mL Water 30 ppm wt. Purity 99.98 wt.% High Boilers 187 ppm wt. Low Boilers 41 ppm wt. Benzene < 1 ppm wt. Residue on Evaporation < 5 ppm wt. Free Chlorine NIL MAJOR USE: As a raw material in the manufacture of vinyl chloride monomer (VCM), polyvinyl chloride (PVC) pipes, packaging materials, furniture, auto mobile parts, wall coverings and housewares EDC is also used as an intermediate in the manufacture of chlorinated and fluorinated compounds. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Methylene Dichloride (MDC) CAS Number 75-09-2 Formula CH2Cl2 Methylene Chloride is a clear, colorless, nonflammable, volatile liquid chlorinated hydrocarbon with a sweet, pleasant smell and emits highly toxic fumes of phosgene when heated to decomposition. Methylene chloride is primarily used as a solvent in paint removers, but is also used in aerosol formulations. SPECIFICATION Appearance Colorless and Transparent , no suspension Specific Gravity (at 20/20C) 1.331 Water Content 0.0013 wt.% Non-Volatile Substance < 0.0003 wt.% Free Acid (as Hydrochloric Acid) < 0.0001 wt.% Chloride < 0.0001 wt.% Purity 99.99 wt.% MAJOR USE: Process solvent in the manufacture of paint strippers, removers and film coatings; as a metal cleaning and finishing solvent in electronics manufacturing; and as an agent in urethane foam blowing. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Vinyl Acrylate Monomer (VAM) CAS Number 108-05-4 Formula C4H6O2 Vinyl Acetate Monomer is a colourless mobile liquid with a pungent odour. It is slightly miscible in water and is considered slightly toxic. It has the formula C4H6O2 and is a key raw material in the production of chemicals which are then used to manufacture a wide variety of consumer and industrial products. SPECIFICATION Appearance Clear and Bright Vinyl Acetate Monomer 99.95 %(m/m) Benzene 4 mg/kg Organic Impurities 0.024 %(m/m) Color (Pt-Co) 5 Water 0.021%(m/m) Relative Density at 20/20C 0.9338 Acidity (as Acetic Acd) 0.0023 %(m/m) Acetaldehyde Content 0.004 %(m/m) IBP 72.5C Dry Point 72.9C Distillation Range 0.4C Hydroquinone 14.8 ppm(m/m) Non-Volatile Matter < 0.001 % (m/m) MAJOR USE: In the production of a wide range of resins and polymers for paints & coatings, adhesives, glues & sealants, elastomers, textile finishes, paper coatings, binders, films, and a myriad of other industrial and consumer applications. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Butyl Acrylate Monomer (BAM) CAS Number 141-32-2 Formula C7H12O2 Butyl acrylate is an acrylate ester obtained by the formal condensation of the hydroxy group of butan-1- ol with the carboxy group of acrylic acid. Butyl acrylate appears as a clear colorless liquid with a sharp characteristic odor. Very slightly soluble in water and somewhat less dense than water. Used for making paints, coatings, caulks, sealants, adhesives. SPECIFICATION Purity 99.73 wt.% Color 5 APHA Water 0.01 wt.% Inhibitor (MEHQ) 100 wt ppm Acidity 6 wt ppm Specific Gravity (20/4C) 0.9 MAJOR USE: It is used commercially on a large scale as a precursor to polybutylacrylate, which is used in paints, sealants, coatings, adhesives, fuel, textiles, plastics, caulk. acrylic rubber, and emulsions. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Styrene Monomer (SM) CAS Number 100-42-5 Formula C8H8 Styrene is a colorless to yellowish oily liquid with a distinctive aromatic odor. It is sparingly soluble in water but soluble in alcohols, ethers and carbon disulfide. This valuable monomer is flammable, reactive and toxic. Styrene Monomer is a light liquid. It has a low vapour pressure and high refractive index. SPECIFICATION Purity, 99.9423 wt %. Ethyl benzene < 10 ppm wt. Polymer 1 ppm wt. Color (APHA) 8.1 APHA Aldehydes, as benzaldehyde NIL Chlorides, total, as Cl < 1 ppm wt. Sulfur, total, as S < 1 ppm wt. Peroxides, expressed as H2O2 10 wt.% Inhibitor, TBC 40 ppm wt. S. Gr. 0.908 MAJOR USE: To make latex, synthetic rubber, and polystyrene resins, plastic packaging, disposable cups and containers, insulation, and other products. Styrene is also produced naturally in some plants. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
MONOMERS Styrene Monomer (SM) Butyl Acrylate Monomer (BAM) Vinyl Acrylate Monomer (VAM) These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
N-Hexane CAS Number 110-54-3 Formula C6H14 Hexane is an unbranched alkane with chemical formula C6H14. It is a colorless liquid with a slightly disagreeable odor. It is highly flammable, and its vapors can be explosive. It is miscible with alcohol, chloroform, acetone and ether. It has acts as a non-polar solvent. SPECIFICATION API Gravity at 60�°F 77.7 Initial Boiling Point at 760mmHG 152.2�°F FBP at 760 mmHG 156.2�°F Boiling Range 4�°F Corrosion Copper Strip 1A Temperature 50�°C Time 3 Hours Acidity Neutral Non-Volatile Matter 0.1 mg/100g Doctor Test Negative Saybolt Color > 30 Total Sulfur < 1.0 ppm Benzene < 1.0 ppm Water Content 69 ppm n-Hexane 61.56 wt. % MAJOR USE: Formulation of glues for shoes, leather products, and roofing, as a cleaning agent in the printing, textile, furniture, and shoemaking industries and also used. to extract vegetable oils from crops such as soybeans. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Solvent C-9 CAS Number 64742-95-6 Formula C9H12 Aromatic hydrocarbons are a series of organic molecules that form flat ring-shaped bonds. Aromatic hydrocarbon C9 resins are conventionally named because it is defined by the number of carbon monomers in the chemical. C9 have a distinctive aromatic odour and a typical Gardner colour of 6- 10 (dark yellow to dark brown). It is insoluble in water, low alcohols and ketones, however are soluble in aliphatic hydrocarbons and chlorinated hydrocarbon solvents. SPECIFICATION Aromatic Content 99.56 %wt Benzene < 10 ppm wt Non-Aromatics 0.44 %wt Acidity No Free Acid Copper Strip Corrosion Pass 1A APHA Color 3 Initial Boiling Point 164.1C Dry Point 177.2C Specific Gravity @ 15.6/15.6C 0.8763C Density at 15C (in Vacuum) 0.8759g/mL Density at 15C (in Air) 0.8748g/mL Density at 30C (in Air) 0.8628g/mL Density at 30C (in Vacuum) 0.8639g/mL Appearance Colorless, Clear, Free of Foreign Matter Total Sulfur 0.1 ppm wt MAJOR USE: In adhesives, printing inks, sealants, polychoroprene rubber, concrete curing compounds, anti-drying agents and paints. It has a good compatibility with SBR, SIS, SEBS and SEPS and can be used as a pressure sensitive adhesive, hot-melt adhesive and synthetic rubber. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Ortho Xylene CAS Number 95-47-6 Formula C6H4(CH3)2 or C8H10 O-xylene is a xylene substituted by methyl groups at positions 1 and 3. It appears as a colorless watery liquid with a sweet odor. It is less dense than water and insoluble in water. SPECIFICATION Styrene < 0.010 Cumene 0.1748 o-Xylene 99.29 Total Aromatics 99.81 Specific Gravity 60/80�°F 0.8840 Color (Pt-Co) 5 Appearance Pass MAJOR USE: To produce phthalic anhydride, an important intermediate that leads principally to various coatings and plastics, used in solvent applications bactericides, soya bean herbicides and lube oil additives. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Mixed Xylene CAS Number 1330-20-7 Formula C24H30 Mixed xylenes refer to the equilibrium mixture of four isomers with the same chemical formulaâ??paraxylene (PX), ortho-xylene (OX), meta-xylene (MX), and ethylbenzene. Mix Xylene appears as colorless, flammable liquids, which are of great industrial value. SPECIFICATION Density at 20�°C (g/cm3) 0.8652 Non-Aromatic (wt.%) 2.70 Color (Pt-Co) No.1 Distillation Range (�°C) 2.0 IBP (�°C) 136.7 DP (�°C) 138.7 Density at 15(�°C) (g/cm3) 0.8686 Density at 30(�°C) (g/cm3) 0.8583 Benzene Content (%wt.) < 0.01 Ethyl Benzene (%wt) 60.97 o-Xylene (%wt.) 8.18 m-Xylene (%wt.) 19.93 p-Xylene (%wt.) 7.93 Styrene (%wt.) < 0.01 MAJOR USE: Solvent for paint and pesticide., raw material for orthoxylene (phthalic anhydride), metaxylene (isophthalic acid), paraxylene (terephthalic acid) and ethylbenzene (styrene monomer). These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Isopropyl Alcohol CAS Number 67-63-0 Formula C3H8O Isopropyl alcohol is a secondary alcohol.it appears as volatile, colorless liquid with a sharp musty odor. Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform. SPECIFICATION Appearance Clear and Bright Platinum Cobalt Color 5 Pt/Co Water Content 0.037 % (m/m) Water Miscibility Pass Density at 20C 0.7851 g/cm3 Acidity (as Acetic Acid) 0.0005 % (m/m) Carbonyl Content (as CH3COCH3) 38.2 mg/kg Non-Volatile Matter < 0.001 %(m/m) Sulphur < 1 mg/Kg Purity 99.92 %(m/m) MAJOR USE: Rubbing-alcohol antiseptic, aftershave lotions, hand lotions, and other cosmetics. In industry it is used as an inexpensive solvent for cosmetics, drugs, shellacs, and gums, as well as for denaturing ethanol (ethyl alcohol). These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Iso Butanol CAS Number 78-83-1 Formula C4H10O or (CH3)2CHCH2OH Isobutanol is an aliphatic alcohol with structural formula (CH3)2CHCH2OH. It is a colorless, flammable, organic compound with a characteristic smell. Isobutanol is widely used in industry, as a solvent in chemical reactions, as well as being a useful starting material for organic synthesis. SPECIFICATION Color < 5 i-Butanol 99.86 %wt. Acidity as Acetic Acid 0.0015 %wt. Water 0.018 %wt. Appearance Clear MAJOR USE: Producing antioxidants, paint solvents, flavors, and synthetic rubber , fuel additive. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
N-Butanol CAS Number 71-36-3 Formula C4H10O Normal butanol (n-butanol) is a primary alcohol with a molecular formula of C4H10O. N-butanol is a colourless liquid of medium volatility and a characteristic banana-like odour. It only has limited miscibility in water, however is easily soluble in regular solvents such as ethers, alcohol, glycols and hydrocarbons. This solvent is very flammable. The major use n-butanol is in the industrial arena. SPECIFICATION N-Butyl Alcohol 99.88 wt.% B-Butyraldehyde 0.00140 wt % 1-Butyl Alcohol 0.3360 wt.% N-Butyl Ether 0.01600 wt.% Acidity as Acetic Acid 0.0007 wt.% Carbonyl as (C=O) 0.00623 wt.% Iron 0.01 ppm Color (Pt-Co) 2.2 Specific Gravity at 20/20�°C 0.8110 Appearance Clear Clean Liquid Non-Volatile Matter < 0.0010 g/100mL MAJOR USE: Solvent for paints, lacquers & varnishes, natural & synthetic resins, gums, vegetable oils, dyes & alkaloids. It is used primarily as an industrial intermediate in the production of ethers and butyl ether acetates, pharmaceuticals, polymers and plastics. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Product Name Tert-Butylhydroquinone Identification Synonyms TBHQ; 2-tert-Butylhydroquinone; 2-(1,1-Dimethylethyl)-1,4-benzenediol; Butylhydroquinone Molecular Formula C10H14O2 Molecular Weight 166.22 CAS Number 1948-33-0 EINECS/CLINCS 217-752-2 Properties Appearance White to light tan crystalline powder Melting Point 126.5-128.5�°C Solubility Almost insoluble in water, and Soluble in alcohol, acetone & ethyl acetate Stability Stable under ordinary conditions Application Used as antioxidant to preserve various oils, fats and food items by retarding their oxidative deteriation. It is used in formulating vanish, lacquar, resin and oil field additives. It is used as a fixative in perfumary to reduce the vaporation rate and improve stability. It is also used as a stabilizer to inhibit the auto-polymerization of organic peroxides. Packing and Storage Packing In kraft paper bag, carton or cardboard drum. Storage Keep tightly closed. Safety Information Non-hazardous for air, sea and road freight.
Methanol, acetone, ethyle acetate..
GPPS The English name for polystyrene is Polystyrene, abbreviated as PS. PS is a thermoplastic non crystalline resin that is polymerized from styrene monomers and can be synthesized through various synthetic methods. In industry, bulk polymerization and suspension polymerization are mainly used. PS is mainly divided into general grade polystyrene (GPPS, commonly known as transparent benzene), impact grade polystyrene (HIPS, commonly known as modified benzene), and foam grade polystyrene (EPS). General grade polystyrene is a thermoplastic resin that is colorless, odorless, odorless, and glossy, transparent, bead like or granular solid.General grade polystyrene is a thermoplastic resin that is colorless, odorless, odorless, and glossy, transparent, bead like or granular solid. It is soluble in Aromatic hydrocarbon, chlorinated hydrocarbons, aliphatic ketones and esters, but can only swell in acetone. It can withstand the action of certain mineral oils, organic acids, alkalis, salts, lower alcohols, and their aqueous solutions. Low water absorption, able to maintain its mechanical properties and dimensional stability in humid environments. The optical performance is second only to acrylic resin. Excellent electrical performance, high volume and surface resistivity, and unaffected by temperature and humidity changes, as well as corona discharge. The radiation resistance is also very good. Its main drawbacks are brittle and easy to crack, low impact strength, poor heat resistance, and inability to withstand boiling water. It can only be used at lower temperatures and loads. Poor sunlight resistance and flammability. When burning, it emits black smoke and has a special odor.
Phenyl acetone harpic colin.
Acetone Cyclohexanone Methyl Ethyl Ketone Methyl Iso Butyl Ketone Di Methyl Carbonate