Foam Tape Suppliers and Manufacturers

Hollyseal PVC Closed Cell Foam Tape Water Seal Foam Weatherstripping For Door Frame 180±20kg/m3 density closed cell PVC foam with pressure-sensitive adhesive on one side designed to provide an economical solution to seal against light, air and moisture. It is ideal for applications such as appliance seals, wall panels, die-cut,gaskets, and window and door weatherstripping. We manufacture finished goods in main types of PVC foam, which are: Quick recovery foams where the material immediately recovers after compression Slow recovery PVC foams ideal for filling irregular surfaces Product Features: 1.Excellent UV resistance and weather resistance 2.Closed-cell foam which seals out air, dust and moisture 3.Conform to curves and different shapes 4.Good compression and adhesive 5.Good vibration dampening and cushioning 6.Thicknesses from 1 mm up to 25 mm 7.Flame resistant product which meets FMVSS 302 8.Dimension stability Technical Information: Density:180±20 kg/m3 Shore 00 Hardness:30±5 30% Compression set: 8% Tensile Strength:519 KPa Elongation;130% Flammability UL-94 HF-1/HBF/FMVSS 302(V0 can be customized) Product application For preventing electrolytic corrosion. Forms a compression air / dust seal. Forms a compression water seal. For cushioning and gap filling. For heavier duty applications.

1"x1"x13' Sealant CR single sided foam tape insulation Single sided CR foam tape DESCRIPTION CR (Neoprene) foam tape provides an excellent seal with good durability. They are less expensive than EPDM Foams. And it provides a good seal against outside elements including moisture. We can make it grid fiber adhesive as well. CR foam tape has very good weather resistance and holding power. It is popular on boat industrial; and other constructer region. Customers requests are available. APPLICATIONS 1,As PE foam and EVA foam are weak in some conditions, CR is the suitable alternative foam tape on the special region and area. 2,assemble and fix the spare in car, air-condition, refrigerator, house hold application. 3, proofing sound, resisting shock in the areas such as construction region. FEATURES 1, water proof. 2, excellent holding power; peel strength and initial adhesion. 3, anti shock, sound proof, heat and humidity resistance. 4, superior stick capabilities to different surfaces such as: metal; plastic; paper; wooden and silicon. 5, it is easy to cut; slit and Joint. Pretty look. APPLY DERECTION:: 1, all surfaces to be attached must be free of dust, dirt, oil, and moisture. (Apply organic solvent to clean surface if necessary.) 2, started from one side of the surface, press the adhesive side of tape firmly in place(leave backing paper on to prevent stretching). 3, remove backing paper. CR FOAM DENSITY75-220KG ELOGATION150% HOLDING POWER1960G/25MM INITIAL TACK25# PEEL ADHESION80G/50MM HEAT RESISTANCE120 DIMENSION AVALIABLE Slit goods thicknesswidthlength 1-50mm3mm-1500mm5m-50m Log roll1-50mm3mm-1500mm300m linerWhite paper; yellow paper Other requests please contact me. STORAGE: 1, keep dry. 2, away from heat; shining and rain.

PE Foam Double Sided Tape For Mirror Mounting Descriptions: PE foam double sided tape is polyethylene foam double sided coated with acrylic adhesive, range provides solutions to practically every industry for bonding, mounting, fixing and joining applications. The products are economical, easy and quick to apply, clean to use, adaptable, versatile and consistent. Features: No residue, easy to control the interface Strong adhension, double-stick and anti-crack Good wather resisitance,heat resisitance and anti-chemicals ect Durable and accmodated irregular surface Good isolation and buffering Applications: Widely used for flexible conjunction of furniture, construction and decoration. Automobile foam tape usually used on rough and uneven surface: sticking signboard, mirror, map etc. Protecting the glass board and packing electric accessories for eliminating noise and reducing vibration function

Die Cutting Custom Size Poron Foam Gasket Tape Foam Strips Product Description PORON is a fine pitch open cell urethane foam produced by Rogers Corporation. The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns. Poron Foam tape Features: Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required. Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices. Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications. Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface. Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies. Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side. Poron Foam tape Applications: Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications. For Sealing, Gasketing, and Cushioning.

Hollyseal Double Sided PVC Foam Glazing Tape for Curtain Wall Hollyseal PVC Foam Glazing is a 300-500 kg/m3 density PVC foam which is coated both sides with high tack acrylic adhesive with blue filmic liner for easy release. It has an closed cell structure to allow curing of structural silicones on all sides of the joint.It is usually used to create a seal between a double glazed unit and the frame on both windows and doors. Product Features: 1.High shore hardness giving guaranteed joint thickness 2.Close-cell foam-seal out moisture and dust 3.Excellent resistance to weathering,oxidation and ultraviolet light 4.Compatible with most silicone sealants 5.Good peel strength and initial adhesion 6.PVC foam glazing tape is smooth on both sides without graininess 7.PVC foam glazing tape with a smooth surface finish 8.Compatible with all commercial silicone sealants used for structural glazing Technical informationï¼? Density:300-500 kg/m3 Shore 00 Hardness 55-90 Tensile Strength: 800KPa Elongation: 70% 180 Peel Strength:0.82N/mm 30% Compression set:7% Flammability:UL-94 HF-1/HBF/FMVSS 302(V0 can be customized) Typical application: 1.Spacer for two- and four- sided structural glazing systems 2.Residential and Commercial window glazing 3.Metal, wood, vinyl sliding window system 4.Commercial refrigeration glazing 5.Vibration Dampening 6.HVAC system

3d Foam Tape Autocollant_self-adhesive (240)

Strong Double Sided Adhesive Foam Tape,Double Sided PE Foam Tape

Strong Double Sided Adhesive Foam Tape,Double Sided PE Foam Tape

Strong Double Sided Adhesive Foam Tape,Double Sided PE Foam Tape