R290 or propane gas currently stands out for its wide range of applications in both the commercial and industrial fields. This gas has practically unbeatable properties in any of its applications, due to its GWP (Global Warming Potential) = 3 and an ODP (Ozone Depletion Potential) = 0. However, on the other hand, being a class A3 refrigerant, it is a non-toxic, but extremely flammable refrigerant. R290 has similar thermodynamic properties to R22, although certain characteristics such as capacity and working pressures are lower. Even so, it has excellent therm-physical properties and its thermal efficiency is good for most conditions, including high ambient temperatures, where the discharge temperature is low. Advantages â?¢ Natural, environmentally friendly and efficient refrigerant. R290 or propane gas is a natural refrigerant and has a low cost due to its abundance. In addition, it has high energy efficiency, thanks to its thermodynamic properties and high performance, which will lead to cost reduction. Climate adaptability. R290 gas has been shown to be better adapted to hot climates than HFCs. Performance. Their smaller displacement compressors further increase efficiency in industrial equipment, while also delivering high performance in commercial applications. Wide range of application. R290 refrigerant is fully suitable for both commercial and industrial equipment and systems. Good compatibility with other components. Reduced charge of R290 refrigerant. Obtaining a higher efficiency and performance than other refrigerants with only 40% charge. Long-term solution free of fluorinated refrigerants. This natural refrigerant is a safe bet for the long term, as it has no future environmental restrictions and is free of refrigerant taxation. Applications: â?¢ Commercial Refrigeration Systems. â?¢ Industrial Refrigeration Systems. Chiller Systems. Chill Cabinetry. Vending. Cold Storage. AC Systems. Heating Pumps.
Double sided scrim tape is made of high strength glass fiber yarn for strengthening the back material, coated with strong adhesion pressure sensitive adhesive on both sides; The double-sided scrim tape has high tension strength, strong viscosity, high wear resistance and moisture resistance. There is a thin layer of high temperature resistant glass fiber mesh cloth in the middle of the adhesive layer (glass fiber in a very wide range of temperature to maintain dimensional stability very little deformation) can provide vertical and horizontal two-way stable size without deformation. Adhesive materials range is very wide, including rubber, PP/PE, PBT/PET, ABS, PMMA, general plastics, metals, inorganic glass and so on. The adhesive can be maintained in a wide temperature range (temperature range depends on the nature of the adhesive material and the weight of the load). Features of Double Sided Scrim Tape Use high duty fiber glass(PES/PVS) mesh cloth as backing Both sides coated with aggressive pressure sensitive adhesive Protected by gold glassine paper release liner Backing material has very good tensile strength Extremely high adhesion strength Can be removed with no glue residue & no de-lamination Excellent resistance to abrasion, moisture, high temperature Can easily conform to many irregular surfaces Double Sided Scrim Tape vs Paper Tape Double Sided Scrim Tape (or Double Sided Fiberglass Tape) Composition: Double-sided scrim tape typically consists of a strong fiberglass mesh (also known as scrim) embedded between two layers of adhesive. This construction provides excellent strength and durability. Double-coated scrim tape is commonly used in construction and building projects for applications such as mounting, bonding, and sealing. The fiberglass mesh provides reinforcement, making it suitable for heavy-duty applications where strength and stability are crucial. Key Features of the Double-sided Scrim Glass Tape: Strong adhesion on both sides. High tensile strength due to the fiberglass mesh. Resistant to tearing and stretching. Suitable for indoor and outdoor use. Paper Tape Composition: Paper tape is typically made of paper or a paper-like material with an adhesive coating on one side. It lacks the reinforcement provided by fiberglass mesh. Paper tape is commonly used in painting and drywall applications for tasks such as masking, taping joints, and covering gaps. It is designed to be easily torn by hand and is often used in situations where flexibility and conformability are more important than sheer strength. Key Features: Easy to tear by hand. Flexible and conformable to irregular surfaces. Suitable for indoor applications where strength requirements are moderate. As a professional adhesive tape factory, Egret has high-quality aluminum foil tape for sale. Welcome to contact us if needed.
A crawler type shot blast cleaning machine, also known as a tumble belt shot blasting machine or rubber belt shot blasting machine, is designed for the efficient and uniform surface treatment of bulk quantities of small to medium-sized workpieces. This type of machine is particularly well-suited for removing rust, scale, sand, and burrs from various parts; preparing surfaces for painting, coating, or plating; and even shot peening to increase fatigue strength. It is commonly used in industries such as foundry, forging, automotive, and metal manufacturing. Tumblast Machine & Barrel Blasting Machines Types Tumble Belt Shot Blasting Machine Barrel Blasting Machines Benefits of Crawler Shot Blasting Machines Efficient Cleaning of Large Workpieces: They are ideal for blasting large, heavy, or oddly shaped parts that wouldn't fit well in traditional blasting cabinets. The continuous movement on the crawler track ensures all surfaces are exposed to the abrasive media for uniform cleaning. Improved Productivity: The continuous processing nature of these machines allows for faster blasting of large workpieces compared to manual methods or using smaller blasting cabinets. Reduced Labor Costs: Automating the blasting process with a crawler machine minimizes reliance on manual labor for handling heavy pieces, potentially lowering overall production costs. Versatility: Some shot blasting machine crawler type offer adjustable track speeds and blast intensity settings to accommodate a variety of workpiece sizes and cleaning requirements. Function of Crawler Shot Blasting Machine Industrial Sandblasting Equipment Continuous Blasting: Unlike blast cabinets where blasting stops for loading/unloading, crawler shot blasting machines offer a more continuous process. Workpieces are placed on a caterpillar track (hence the name "crawler") that moves them steadily through the blasting chamber. This allows for efficient processing of large or heavy pieces. Multiple Blast Wheels: Strategically positioned blast wheels within the chamber bombard the workpieces with abrasive media as they travel on the crawler track. This ensures thorough cleaning of all surfaces, even on complex-shaped objects. Durable Construction: These machines are built to handle the weight and potential impact of large workpieces. They typically feature robust construction materials and heavy-duty components for reliable operation in demanding environments.
Product Description Product Info for Swarovski 10x25 CL Pocket Mountain Binoculars (Green, Mountain Accessory Package) The Swarovski Optik 10x25 CL Pocket Binoculars are a lightweight optic with the quality construction and viewing precision that nature enthusiasts have come to expect from the brand. They feature a dual-hinge bridge that allows the optical barrels to fold tightly underneath for space-saving compact footprint that can easily fit in a pocket, pack, or purse. The folding bridge design also yields a broad 51-74mm interpupillary distance, so the binoculars are comfortable for a wide range of adults and children. High-quality glass bearing Swarovski's SWAROBRIGHT, SWAROTOP, and SWARODUR lens coatings deliver a crisp image with accurate color rendition across the entire field of view. The optical tubes are nitrogen-filled to prevent internal fogging from condensation and submersible to a depth of 13'. This model of the Pocket CL comes with the Mountain accessory packageâ??a rope-style neck strap and an orange carry case. Optical Performance 10x magnification 25mm objectives Compact roof prism optical path Highly reflective SWAROBRIGHT prism coating optimizes color representation and contrast Anti-reflection SWAROTOP lens coating reduces glare and improves contrast, color rendition, and clarity Scratch-resistant SWARODUR coatings protect exterior lens surfaces 294' field of view at 1000 yards Use and Handling Closed-bridge/dual-hinge configuration Recessed center focus wheel with raised ridges to more easily control the focus precision �±5 right eye dioptric correction 51-74mm interpupillary adjustment range accommodates a wide variety of users from children to adults Twist-up eyecups for comfortable use with or without eyewear Long 17mm eye relief Comfortable 2.5mm exit pupil Construction Details Dual hinges on the bridge allow the optical tubes to fold tight underneath for an extremely compact form factor when closed Lightweight and durable aluminum-alloy chassis Inert gas filled and O-ring sealed to be waterproof and resistant to internal fogging when moving through extreme temperature changes or environmental conditions Waterproof to a depth of 13' Protective rubber armoring with textured palm pads provides a comfortable slip-resistant grip Broad -13 to 131�°F operating temperature range Compact 4.3 x 4" footprint Lightweight: 12.3 ounces
enviClone Photovoltaic PV Module Solar Panel Wind Resistance Dynamic Mechanical Load Test Machine The PV modules Dynamic Mechanical Load (DML) Test Machine simulates the dynamic load with the pneumatic cylinders and suction cups. Each pneumatic cylinder drives one suction cup, and each cylinder rod is equipped with one tension pressure sensor. Each pneumatic cylinder is a separate control module. Periodic load stress test is performed on the Photovoltaic (PV) Modulesâ?? surface, and PV Modules can be installed according to different requirements. The system also has the ability to monitor the curvature of the PV Moduleâ??s center points in real time. SPECIFICATION Model No.: EVCL-DML-2200, EVCL-DML-2600 Max Dimensions of Tested PV Module Panel 2200 mm x 1200 mm, 2600mm x 1300mm, etc. Quantity for each test 1 Piece of PV Module Pressure Method Pneumatic Cylinders Quantity of Pneumatic Cylinders: 50 pcs, 98pcs, etc (varies as per your Max dimensions of solar panel) Quantity of Pressure Sensors: Each pcs for each pneumatic cylinder The Max Pressure can be tested: 12,000 Pa The Max Pulling Force can be tested: 7,500 Pa Accuracy Deviation: â?¤3% Deformation Sensor: 1 (or customized as per requirement) Controlling Method: Siemens PLC + HM1 Drive Method: Air Compressed Load Amplitude Test Range (Static) Pressure:� +500~12,000 Pa (Continuous, adjustable) Suction:� -500 ~ -7,200 Pa (Continuous, adjustable)� Note: The test time and pressures can be adjusted during the test every time. Load Amplitude Test Range (Dynamic) Pressure:� -2,500 Pa ~ +2,500 Pa Suction:� -500 Pa ~ -7,200 Pa Frequency:� 3~7 times / min Accuracy Deviation:� â?¤� �±50 Pa. Test Standards IEC TS 62782 Photovoltaic (PV) modules â?? Cyclic (dynamic) mechanical load testing IEC 61215 Ed.3 Static: Forward Direction 2400 Pa�·1 IEC 61730 MST 34 Equivalent: IEC TS 60904-12, IEC TS 61836, ISO/IEC 17025, etc. Wuxi EnviClone Test Equipment Company specializes in environmental simulation test chambers for various industries such as automotives, photovoltaic (PV) modules, solar power, new energy batteries, rubber manufacturing, electronics, military, etc.
High quality fresh Garlic, harvest of 2024. Packing plastic box. Caliber 50+. Price is quoted FCA. Includes all necessary customs documents. Also available dried garlic. Origin Uzbekistan Dungan garlic is a variety of winter garlic, which is characterized good yield. Characteristics Appearance:Bulbs have **6 outer scales colored in pink-purple tones with dark dashes. The weight of one bulb ranges from *3 to *6 grams. Taste:Garlic has a sharp flavor, which makes it popular both in cooking and in folk medicine. Substance content: Dungan garlic contains about *1% dry matter and *3% total sugar, indicating its nutritional properties. Growing conditions Dungan garlic requires proper care and adherence to agronomic conditions to achieve high and sustainable yields. Uses Dungan garlic is widely used in cooking for various dishes, as well as a seasoning and natural preservative. Its pungent flavor and aroma make it an indispensable ingredient in many cuisines around the world. Thus, Dungan Garlic is not only a tasty but also a useful product that deserves the attention of both gardeners and cooks.
Our Jamun Honey is derived from the plant of Jamun and it is of darkish darkish black color having very pleasant taste. Here are some specifications Our Honey is 100% pure, unprocessed and without any additives. Our team assure buyer's for the proper laboratory testing with the Government authorized laboratory. Here are the specifications of our Honey Moisture Contents : Around 17-17.50% Total Energy : 330 - 345KCal (per 100gms of Honey) Natural Sugar : 84-86gms C-3 Sugar : Absent/Nil C-4 Sugar : Absent Glucose and Fructose Contents : 45-48gms and 30-33gms respectively (per 100gms of Honey) (AS per USFDA sum of both should be not less than 60gm per 100gm of honey) Sucrose : 3-4gms per 100 gms (Not more than 5gms per 100gms of Honey) Free from Antibiotics We are having a US FDA registered facility for Honey and focusing mainly on the standards set by US FDA and USDA for honey. We are selling our honey in US Retail Stores/Market.
Product Specification: 1 Botonical Name : Cymbopogon 2 Major Constituents : Citral 3 Other Active ingredients :Myrcene, Limonene, Geraniol, Citronellol, Geranyl acetate, Neral, and Nerol. Although Myrcene and Limonene are Aromatic Compounds, Citral and Geraniol serve as an Antimicrobial and Insecticidal, respectively. 4 Color : Green 5 Packaging Size : 100grms, 200grms, 500grms, 1 kg, 5 kg. 6 Form : Dehydrated Leavws 7 Method : Chopped Green Leaves and Dehydrate 8 Parts Used : Grass leaves 9 Self Life : 2 years 10 Brand : AAF About Company: 1. Year of Establishment : 2023 2. Legal Status of Firm Individual : Proprietor 3. Nature of Business : Cultivation & Manufacturer 4. Number of Employees Upto : Upto 8 People 5. Annual Turnover : Rs. 20 Lakh - 50 Lakh 6. IndiaMart Member : Since Feb 2024 7. GST : 09BFGPN5674D1Z7 8. Based At : Lucknow, Uttar Pradesh (India)
Product Specification: 1 Botonical Name : Cymbopogon 2 Major Constituents : Citral 3 Other Active ingredients :Myrcene, Limonene, Geraniol, Citronellol, Geranyl acetate, Neral, and Nerol. Although Myrcene and Limonene are Aromatic Compounds, Citral and Geraniol serve as an Antimicrobial and Insecticidal, respectively. 4 Color : Greenish 5 Solubility : Soluble in Alcohol and other organics solvents 6 Packaging Size : 100grms, 200grms, 500grms, 1 kg, 5 kg. 7 Form : Powder 8 Method : Grinding of Dehydrated Leaves 9 Parts Used : Grass leaves 10 Self Life : 2 years 11 Brand : AAF About Company: 1. Year of Establishment : 2023 2. Legal Status of Firm Individual : Proprietor 3. Nature of Business : Cultivation & Manufacturer 4. Number of Employees Upto : Upto 8 People 5. Annual Turnover : Rs. 20 Lakh - 50 Lakh 6. India Mart Member : Since March 2024 7. GST : 09BFGPN5674D1Z7 8. Based At : Lucknow, Uttar Pradesh (India)
Product Specification: 1 Botonical Name : Cymbopogon 2 Major Constituents : Citral 3 Other Active ingredients :Myrcene, Limonene, Geraniol, Citronellol, Geranyl acetate, Neral, and Nerol. Although Myrcene and Limonene are Aromatic Compounds, Citral and Geraniol serve as an Antimicrobial and Insecticidal, respectively. 4 Color : dark yellow to light brownish color with a thin consistency. 5 Solubility : Soluble in Alcohol and other organics solvents 6 Packaging Size : 0.5 Litre, 1Litre, 5Litre 7 Form : Liquid 8 Extraction Method : Water & Steam Distillation 9 Parts Used : Grass leaves 10 Self Life : 2 years 11 Brand : AAF About Company: 1. Year of Establishment : 2023 2. Legal Status of Firm Individual : Proprietor 3. Nature of Business : Cultivation & Manufacturer 4. Number of Employees Upto : Upto 8 People 5. Annual Turnover : Rs. 20 Lakh - 50 Lakh 6. IndiaMart Member : Since Mrch 2024 7. GST : 09BFGPN5674D1Z7 8. Based At : Lucknow, Uttar Pradesh (India)
Product Detail PRODUCT SPECIFICATION ASEPTIC POMEGRANATE CLEAR JUICE CONCENTRATE Pomegranate clear concentrate is made from fresh red pomegranates. The process includes washing, crushing, deshelling, pressing, get concentrate through evaporator and aseptically packed after pasteurization and cooling. Colour/Appearance/Texture Homogenous and free from foreign materials. Red to dark red color Odour/Taste/Aroma Characteristic of natural pomegranates, fruity sweet tart pomegranate flavour and aroma Total Soluble Solids, Brix 65 Ã?± 1 Total Acidity (%, as malic acid) 4.4 to 6.0 pH value 2.8 to 3.4 Pesticides / agro-chemical residues Below detectable limits Heavy Metals Below detectable limits Total Aerobic Count Less than 50 cfu/g Yeast & Moulds Less than 10 cfu/g MPN Coliforms Less than 3 / g MPN Faecal Coliforms Less than 3 / g Salmonella / 25g Negative Patulin ≤ 50 ppb
BERRI coir substrates are optimal and ideal pot Media to cultivation of Tomato, Cucumber, Capsicum, Berry plants in Hydroponic Green house container cultures. Pick Best and optimal Berri Coco Substrates to farming of cucumber, tomato, bell pepper and berrys grow by container cultures in Hydroponic green houses Berri coco substrates are exported to garden supply companies, and retail stores. Graded Coconut coir fibre, husk chips and coco crushed materials are compacted as a small cube bricks. Its lightweight and easy to handle. This coir substrates is available in 1 gallon to 10 gallon sizes variety of pot sizes. Such as excellent water retention, aeration, drainage, and nutrient availability.Its holding around 30% more water than most peat. This special mixture offers superior drainage and air circulation as well as a nutrient content that reduces the risk of root rot. Minimizes harmful pathogens and reduces the risk of pests: This medium boasts antifungal properties, which keeps the roots happy pH-neutral nature, which means there is no need for additional adjustments. It an ideal choice for those seeking sustainable and healthier plant cultivation methods.This not only decreases its carbon footprint; it also ensures that coco coir is a budget-friendly option. BERRI affordable Coco mix blocks highly optimal growing media for tomato, cucumber,berry and capsicum farm cultivation by containers in hydroponic indoors. We at BERRI COIR SUBSTRATE guarantee promised expansion and EC for our products.Products are application centric designed for specific usage BERRI COIR SUBSTRATE guarantee promised expansion and EC for our products. 1.BERRI - BL 30 /COCO MIXED BLOCKS / BRICKS MIXING : COIR 75 % +CHIPS 20 % +COCO CRUSH 2%+ FIBER 3 % WHC: 6.75 Lt/ KG AIR PORACITY: 10.1 % 2. BERRI BL 50/ COIR MIXED BLOCKS / BRICKS / SLAPS / 1 KG / 650 GRAM MIXING : COIR 45 % +CHIPS 50 % % + FIBER 3% + COCO CRUSH 2% WHC: 5.75 Lt/ KG AIR PORACITY: 22.1 % 3. BERRI BL RH 20 / COCO MIXED BLOCKS / BRICKS MIXING : COIR 25 % +CHIPS 50 %% + FIBER 3% + COCO CRUSH 2%+ RICE HULLS 20% WHC: 5.90 Lt/ KG AIR PORACITY: 24.2 % 100% natural. Ideal air to water ratio for hydroponics.
Indulge in the pure essence of nature with our Premium Green Tea from MIQ OVERSEAS. Sourced from the luscious tea estates of India, our green tea is a celebration of freshness and unparalleled quality. Key Features: 1. Unmatched Freshness: Harvested at the peak of perfection, our green tea leaves are carefully selected to ensure maximum freshness. Experience the crisp, vibrant taste that only the finest tea leaves can deliver. 2. Rich in Antioxidants: Immerse yourself in the health benefits of antioxidants with every sip. Our green tea is a powerhouse of natural antioxidants, promoting overall well-being and vitality. 3. Delicate Flavor Profile: Discover a symphony of flavors in every cup. From the initial subtle notes to the refreshing finish, our green tea offers a delicate balance that delights the palate. 4. Sustainably Sourced: MIQ OVERSEAS is committed to sustainable practices. Our green tea is sourced responsibly, ensuring that every cup you enjoy leaves a minimal environmental footprint. Brewing Instructions: Experience the perfect cup of green tea with our simple brewing guide: Water Temperature: Bring fresh, cold water to just below boiling (around 80�°C/176�°F). Tea-to-Water Ratio: Use one teaspoon of green tea leaves for every 8 ounces of water. Steeping Time: Let the tea steep for 2-3 minutes to unlock the full spectrum of flavors. Elevate Your Tea Experience: Unwind and savor the moment with our Premium Green Tea. Whether you\'re a seasoned tea connoisseur or just beginning your journey, MIQ OVERSEAS brings you a tea that transcends boundaries, inviting you to embrace the tranquility in every cup. Order Now and Embark on a Green Tea Experience Like Never Before!
Cellulose ether CAS NO.:9004-65-3 Cellulose ether Hydroxypropyl Methylcellulose (HPMC) are non-ionic cellulose ether & its derivatives that have hyrdroxyl groups on the cellulose chain substituted for a methoxy or hydroxypropyl group. HPMC is made from natural cotton linter under chemical reaction,which can be dissolved in both cold water and hot water to form a transparent solution. HPMC is used as a thickener, binder, and film former in construction, pharmaceutical,food, cosmetic, detergent, paints, adhesives, inks, PVC and various other applications. Chemical Specification Specification 60AX ( 2910 ) 65AX ( 2906 ) 75AX ( 2208 ) Gel temperature (â??) 58-64 62-68 70-90 Methoxy (WT%) 28.0-30.0 27.0-30.0 19.0-24.0 Hydroxypropoxy (WT%) 7.0-12.0 4.0-7.5 4.0-12.0 Viscosity(cps, 2% Solution) 3, 5, 6, 15, 50, 100, 400,4000, 10000, 40000, 60000,100000,150000,200000 Food Grade Hydroxypropyl Methylcellulose (HPMC): Food Grade Hydroxypropyl Methylcellulose (HPMC) is a non-ionic water soluble cellulose ether Hypromellose, targeted for the food and dietary supplement applications. Food grade HPMC products are derived from natural cotton linter and wood pulp, meeting all the requirements of E464 along with Kosher and Halal Certifications. Food grade HPMC is in compliance with FDA, EU and FAO/WHO guidelines, is manufactured in compliance with GMP standard, retaining FSSC22000 , ISO9001 and ISO14001 certifications . Package: 25kg paper bags with PE inner ; 25kg/Fiber Drum
ZM-R5860 Hot Air BGA Rework Station ZM R5860C Hot Air BGA Rework Station is a kind of rework station provided by Zhuomao, which has three temperature zone Independently control, convection hot air heating, lower temperature zone height-adjustable, high-precision autonomous control system, high-precision K-type thermocouple with accuracy up to ± 3, dynamic APR multi-loop closed-loop control selective reflow process. Imported high power constant current integrated cooling fan. As one of the most reputable BGA Rework Station suppliers, Seamark ZM provides the best BGA Rework Station with good quality. If you want to know seamark ZM R5860 price, please contact us now! Functions of Zhuomao ZMR5860 Smart BGA Rework Equipment 01 Temperature Curve Setting High-definition touch screen operation, real-time display and, editing of temperature curves, each group of temperature curves can be set to 8 segments, 100 groups of temperature curves can be stored, with temperature self-organizing function. 02 Laser Red-dot Positioning Guide Laser indicator for PCB and component positioning. 03 Vacuum Adsorption The external vacuum suction pen is convenient for taking BGA. Specification Of Seamark Zhuomao BGA Rework Station Power Supply AC220V±10% 50/60HZ Power 5.0KW(Max), Top heater(0.8KW) Bottom heater (1.2KW), IR Preheater (2.7KW),Other(0.3KW) PCB Size 410*370mm(Max); 10*10mm(Min) BGA Chip Size 40*40mm(Max); 10*10mm(Min) IR Heater Size 375*285mm Temperature Sensor 1 pcs Operation Method 7" HD touch screen Control System Autonomous heating control system V1 software copyright Alignment System Laser dot Vacuum Adsorption Manual Temperature Control K-type thermocouple closed-loop control with accuracy up to ±3 Positioning V-groove with universal fixture Dimensions L635*W620*H655mm Weight 43.5KG Principle And Operation Mode Of Seamark ZM R5860 BGA Machine The Seamark ZM R5860 BGA Machine is a rework station used for soldering and desoldering ball grid array (BGA) components on printed circuit boards(PCBs).BGA components are a type of surface-mount packaging used for integrated circuits. Seamark Zhuomao ZM R5860 BGA Machine is based on the hot air rework technique. lt uses precisely controlled hot air to melt the solderballs of the BGA component allowing it to be removed or replaced without damaging the PCB or the component itself. The machine also uses a vision alignment system to accurately align the BGA component with the PCB. The Seamark ZM R5860 BGA Machine allows for precise control over the temperature and airflow, ensuring a reliable and high-quality soldering/desoldering process. lt is suitable for use with a wide range of BGA components and PCBs. The operation mode of the Seamark ZMR5860 BGA Machine involves several steps: Preheating: The PCB is preheated to a suitable temperature to prevent thermal shock to the board when the hot air is applied.
HSC-1/2/3/4 Differential Scanning Calorimetry Overview (DSC) Classical differential thermal calorimetry conducts thermal analysis by controlling temperature programs to observe heat effects. This method is extensively utilized across various material and chemistry research endeavors, including process optimization, quality control, and failure analysis. Through DSC, one can investigate inorganic material phase transitions, polymer melt crystallization solid/liquid ratios, drug polymorphs, food items like grease, and more. Instrument Feature of Differential Scanning Calorimeter (DSC) 01 Heat type differential scanning calorimeter repeatability, accuracy, particularly suitable for precise measurements of the specific heat. 02 Independent research and development of the constant temperature controller; Constant temperature gas chromatography and mass spectrometry connected head; Constant temperature. 03 Machine integration, and the furnace temperature control unit volume as a whole, to reduce signal loss and interference. 04 Two perfect atmosphere control system that uses mass flow controllers. 05 Instrument is equipped with standard materials, the user can correct the temperature ranges of their own, to reduce the error of the instrument. 06 Intelligent software design, full automatic drawing instrument, the software can achieve a variety of data processing, such as enthalpy calculations, the glass transition temperature, the oxidation induction period and the melting point of the crystalline material and the like. 07 DSC instrument can automatically generate test reports and oxidation induction period. Instrument Parameter of Differential Scanning Calorimeter (DSC) Temperature data Temperature range HSC-1: RTï½?680â??(optional 1150â??) HSC-2: -30ï½?680â??(mechanical refrigeration) HSC-3: -100ï½?680â??(manual feed nitrogen) HSC-4: -100ï½?680â??(automatic feed nitrogen) Temperature accuracy �±0.1 Heating rate 0.1â??/minï½?100â??/min Repeatability �±0.1â?? DSC data Temperature control Heating thermostat(the program automatically) Gas flow 10ï½?200mL/min Measurement range �±500mw Minimum resolution �±0.1�¼w Sample pan Ceramic 0.06mL Sealed aluminum crucible 30 �¼ L Aluminum 0.06mL Sealed stainless steel high-pressure crucible 30 �¼ L Platinum 0.06mL Temperature correction Baseline correction intelligent freely selectable With standard characteristics(indium,tin,lead,zinc,alumi num),the user can correct the temperature As one of differential scanning calorimeter manufacturers, we can provide kinds of differential scanning calorimeter for sale, if you are interested, please contact us. If you want to know more differential scanning calorimetry dsc solutions, please visit our website. As a thermal energy analyser company, we will do our best to meet all the needs of customers.
Ultima trading is engaged in the production, export and distribution of wood products and agricultural goods to European countries. Thanks to the quality of our products, well-established logistics and customer support from start to finish, we have taken a leading position as an exporter of heating products from Ukraine for 5 years, so more than 50 companies cooperate with us. In 2022, we have significantly increased our production capacity, so we are looking for new partners around the world. All products comply with European quality standards DIN and DIN+. Consistently high product quality is achieved through the use of Ultima carbon retort kilns. FSC 100% certified products Unleash the flavor with Wood Charcoal! Experience the art of grilling with our premium charcoal that delivers exceptional heat, long burn times, and tantalizing smoky aromas. Elevate your BBQ to perfection, searing in mouthwatering flavors that will leave your guests wanting more. Ignite the fire within and let Wood Charcoal bring your grilling skills to new heights. Embrace the essence of authentic outdoor cooking. Production capacity: - 1000 tons per month Price: 500 â?¬/ton Types of wood: - Hardwood: Hornbeam, beech, oak, birch - Softwood: Alder, aspen - Coniferous: pine - Fruit: apple tree Characteristics: - Carbon (s-fix): 75%-85% - Humidity: 3%-8% - Ash content: 2%-5% - Volatile substances: 10-15% - Long burning time - Burns without soot, smoke and sparks Granulations are available: - Standard: 20mm-80mm - Gastro: 40mm-120mm - Restaurant: 70mm-150mm - Small: 20mm: -For briquette manufacturers! Advantages: - High heat output - Long burn time - Quick ignition - Low ash production Packaging: - Paper bags from 1-15 kg - Polypropylene 11-14 kg - Big bags - Carton boxes Branding: - Private label paper bags - Private label carton boxes Lead time: -7 days - private label: 20 days Delivery info: - inland, by sea - door-to-door delivery - delivery terms: FCA, DAP, DDP, FOB, CFR, CIF Logistics info: Polypropylene bags: - Hardwood: 17-20 tons - Softwood 12-15 tons Big bags: 14-16 tons Palletized: 8-16 tons *Check the loading scheme in the photos Other products by Ultima: 1. Apple wood charcoal 2. Wood pellets 3. A1 EN Plus wood pellets 4. Pini Kay wood briquettes 5. Ruf wood briquettes 6. Nestro wood briquettes 7. Firewood | nets 8. Firewood | crates 9. Fence posts We are looking for international customers for long-term cooperation! - Buy charcoal, charcoal in bulk, charcoal price per ton, charcoal to buy, charcoal to buy, charcoal price, 1 ton of charcoal, charcoal price per ton, charcoal, charcoal wholesale
Dibutyl Phthalate CAS . 84-74-2 Wholesale & Bulk This product is a plasticizer with strong solubility to various resins, It can also be used in the manufacture of paints, statins, artificial leather, printing inks, safety glass, cellophane, dyes, insect repellent solvents and fixatives, fabric lubricants and rubber softeners. Dibutyl Phthalate CAS Number 84 74 2 Product Name Dibutyl Phthalate Multiple Names Dibutyl Phthalate; DBP; Butyl Phthalate; Di-n-Butyl Phthalate; Phthalic Acid Di-N-Butyl Ester; Benzene-1,2-Dicarboxylic Acid Di-N-Butylester; Dibutyl Benzene-1,2-Dicarboxylate; Dibutyl-O-Phthalate; Dibutyl Phathalate. CAS No. 84-74-2 EC No. 201-557-4 MF No. C16H22O4 MW No. 278.346 Specification of Dibutyl Phthalate CAS No. 84-74-2 Assay Item Standard Form Liquid Color APHA: 10 Boiling Point 340 °C (lit.) Melting Point -35 °C (lit.) Density 1.043 g/mL at 25 °C (lit.) Freezing Point -35â?? Advantage of Dibutyl Phthalate CAS No. 84-74-2 1. Colorless transparent oily liquid with slight aromatic smell. Soluble in common organic solvents and hydrocarbons. 2. It can give good softness to products. Because of its relatively low price and good processability. 3. It is prepared by esterification of phthalic anhydride and n-butanol. As one of bulk chemical companies, we will do our best to meet all the needs of customers.
Introducing our premium Nitrile Examination Gloves,crafted to provide exceptional protection and comfort in medical settings. Made from high-quality nitrile material, a synthetic rubber known for its durability and elasticity, these gloves offer superior performance for various examination needs. Key Features: High-Quality Nitrile Material: Our gloves are crafted from high-quality nitrile material, ensuring excellent durability and elasticity for prolonged use. Powder-Free Design: The powder-free design eliminates the risk of powder-related allergies and reduces the potential for powder contamination in sensitive environments. Enhanced Grip: Featuring a textured surface on the fingers and palm, our gloves provide enhanced grip, ensuring better tactile sensitivity and control, even in wet or oily conditions. Latex-Free: Our gloves are latex-free, making them suitable for individuals with latex allergies. Thinner and More Tactile: Thinner than traditional nitrile gloves, our gloves offer better sensitivity and flexibility, allowing for precise handling of delicate tasks. Benefits: Excellent Barrier Properties: Nitrile gloves offer excellent barrier properties, effectively protecting both the wearer and the patient from cross-contamination and infection. Comfortable Fit: Known for their snug and comfortable fit, our gloves reduce hand fatigue and increase dexterity, essential during prolonged use.Cleaner Environment: The powder-free design reduces the risk of powder-related allergies and prevents powder residue on surfaces, maintaining a cleaner environment. Better Sensitivity and Flexibility: Thinner nitrile gloves enable healthcare professionals to perform delicate tasks with precision, thanks to better sensitivity and flexibility. Specifications: Material: NitrilePowder: Powder-Free Color: Various colors available (e.g., blue, purple, etc.) Thickness: Typically available in various thicknesses (e.g., 3 mil, 4 mil, 5 mil, etc.) Packaging: Available in boxes of 100 gloves or as per manufacturer's packaging Compliance: Meets ASTM D6319 and EN 455 standards for medical gloves
Model 4L126TIL Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 545(401)/2,200 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 11.4 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 114 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
