21.5 Inch 1920x1080 FHD 30PIN LVDS-Double IPS 600nits Open Frame LCD EX21501-A01 is a 21.5 inch 19201080 Resolution IPS TFT LCD module that supports LVDS interface. It can be operating at temperatures from 0~50 and storage temperatures range from -20~65. And, it features with 600(nits) high brightness and wider viewing angle technology. Open frame tft display is Suitable for industrial and medical imaging self-service terminals retail terminals supermarket checkout machines,etc. General Specifications of� 21.5 Inch 1920x1080 FHD 30PIN LVDS-Double IPS 600nits Open Frame RGB vertical stripe No. Item Specification 1 LCD size 21.5 INCH 2 Resolution 19201080 3 Active area 476.64(H)268.11(V)mm 4 Module size 487.54(H)279.684V1.335Dmm 5 Interface LVDS-Double 6 Brightness 600cd/m2 7 Contrast Ratio 4000:1 8 Pixel arrangement 9 Surface Treatment Anti-Glare� 10 Display Colors 16.7M 11 Polarizer Transmissive 12 Display mode Normally Black As a professional tft module factory, we provide tft lcd display module, ips tft capacitive touchscreen, ips capacitive, ips capacitive screen, ips lcd capacitive, ips touch panel, ips capacitive touchscreen, ips lcd touch screen, ips lcd capacitive touchscreen, china tft lcd display, etc. For more information, please feel free to contact us!
EX02002-A01 is a 2.0inch, IPS TFT LCD module with transmissive mode. Its resolution is 480 360dots (480 vertical by 360 horizontal pixel) and every pixel is made up of three vertical strips of Red, Green and Blue dots. This miniature 2.0 inch TFT module has built-in IC ST7701S supporting MIPI serial interface. The brightness is 250 cd/m2 with contrast ratio 1000:1.Operating temperature covers from -20~+70, storage temperature range is from -30~+80.This single-display module is suitable for use in industry, household appliances, toys and medical treatment,etc. General Specifications of 2.0 Inch 480x360 HVGA 24PIN MIPI IPS 250nits No. Item Specification 1 LCD size 2.0inch 2 Resolution 480(RGB)360 3 Active area 40.8(W)30.6(H) 4 Module size 49.1(W)45.96(H)2.53(T)(Exclude FPC)mm 5 Interface MIPI1 6 Polarizer Transmissive 7 Brightness 250cd/m2 8 Pixel arrangement RGB vertical stripe 9 Back Light 450cd/m² 10 Viewing Direction All 11 Contrast Ratio 1000:1 As a professional china lcd module manufacturer, we provide china lcd display panel, dsi tft display, dsi tft, dsi lcd panel, mipi dsi lcd panel, mipi lcd panel, mipi tft, hvga lcd, hvga tft, etc. For more information, please feel free to contact us!
Ceramic Fiber Board Density: 260-320 kg/m ³ (16-20 lb/ft ³) Raw materials: Spun ceramic fiber bulk Thickness: 10mm, 20-50 mm Asbestos: 100% Non Asbestos Function: Refractory & Fireproof & Insulation ROSEWOOL ceramic fiber board is made of ceramic fiber cotton by the process of vacuum forming or dry process refined by dry and machining. It has good specialties of rigid ity flexibility heavy intensity anti-wind erosion, non-expansion, lightweight, and easy to construct. It can be cut and bent optionally. Thus, it is the practical and efficient material of kiln and furnace, pipe and other thermal insulation equipment. Ceramic Fiber Board Application 1. The wall liner and back lining materials of high-temperature reaction, reheating equipment and various industrial furnace such as used glass tempering furnace, pottery kiln, ceramic kiln and tunnel kiln 2. Insulating and fire proof plate of furnace door and roof or house chimney and fireplace 3. Lows fire proof and insulation for chimney cake ovens, pizza oven 4. Boilers and heater combustion chamber 5. Aluminum factories-reduction cell firebricks back linings 6. Ladle furnace backing 7. Shipping, aviation, precision industrial equipment 8. Refractory and thermal insulation material in kiln or furnace of construction industry for heating and wall liner of high-heat treatment
Place of Origin Hubei, China Type railway tools Material Aluminum alloy Dimensions (L x W x H) (mm) 184*50*28cm Brand Name Linkage Type: Rail Track square ruler Product name: Railway Track Square Ruler MOQ 2PCS Size: 1760mm Color: customized Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1)Measure the switch angle steel whether is square when installed 2)Measure the internal lock switch parts whether is square when installed 3)Measure the switch rail whether creeping 4) Measure the sleeper whether square when installed.
HY-1040 Molecular formula H2[AI2O3·mSiO2(OH)2]·nH2O Properties This product is a sub-white powder, which is not dissolved in water, oil or organic solvent. It has strong properties as cation exchange capacity, selective adsorption, hydrophilic property, surface activity and catalysis, It can adsorb and eliminate mineral materials as pitch, neutral colloid, sulfide and olefinenaphthenic acid in lubrication to improve the durability and photo-stability of the lubricant and to increase the ability of corrosion-resisting, and can also absorb and eliminate the pigment, aflatoxin and the carcinogenic substance of 3-4 benzpyrene in vegetable oil, in addition, it has strong ability of oil, in addition, it has strong ability of oil decolorization, high speed of filtering oil and low oil retention of filter cake. Functions�¯�¼?it's widely used in the absorption and refinement of lubricant, paraffin wax, and vaseline, the decolorization of animal and vegetable oil, and the purification of honey, wax and glycerine. Specifications Performance indicators of activated clay Technical requirements for active clay manufacturers' products: 1, appearance: grey or light fine powder. 2, water (2 hr. 105 C) : 12% 3, decoloring force: 154 4, active degree: 180 mol/kg 5, particle size (0.076 mm) : 95% 6, free acid (in - H2SO4) : 0.20% 7, heavy metal content (Pb) : 10 mg/kg 8, arsenic content: 3 mg/kg
Usage: Choose cold or hot drinks. Raw material : Choose PE OR PLA OR FSC PAPER Feature: Disposable Eco Friendly Stocked BiodegradableSize : Customer Requirement Color: Customized Color Logo : Customized Logo Acceptable Certification: FDA/SGS/BRC/ISO9001 Packing: 50pcs*20bags/carton or customized packing way Product Keywords: biodegradable paper Material: PE coated paper Capacity: We can accept various capacities Printing: Flexo print; water ink with food grade ink Use: Paper cups for food or beverage Packing: Carton or customized OEM Service: Yes Payment T/T L/C etc. Port: Quotation Based on material, size, print colors, quantity MOQ 5 tons Sample Availableï¼? 1.Product name: Printed paper for paper cup in roll or paper fan. 2.Material:Food grade wood pulp paper. 3. Weight: 170gsm-350gsm with PE coating in different weight. 4. Width:550mm-1200mm. 5.Package: in roll/sheet/cutting paper cup fan with wrap and pallet. 6.Printing: Flexo printing/offset printing. 7.Application:Mateial for making paper cup fan and bottom paper, Mateial for makng paper plate, paper meal box, package box Other disposable paperfood package; Waterprooflgrease proof package material. Here are the size which can meet your needs. 4oz -Espresso 6oz -Flat white 8oz - Small takeaway 10oz- Regular (designed for use under automatic machines) 12oz - Regular coffee 16oz -Large coffee-to-go 20oz- Oversize / extra large coffee Single wall Paper cup Size Paper gsm Top*Bottom*Height(mm) PCS/CTN 4oz APP 210+18 PE 63*46*62 1,000 6oz 250+20g PE 71*53*77 1,000 6oz APP 230+20 71*53*77 1,000 8oz 280+20g PE 80*57*92 1,000 8oz APP 250+20 80*57*92 1,000 8oz 300+20g PE 80*57*92 1,000 10oz 280+20g PE 90*60*95 1,000 10oz 280+20g PE(APP) 90*60*95 1,000 12oz 280+20g PE 90*60*111 1,000 12oz 300+20g PE 90*60*111 1,000 12oz APP 270+20 90*60*111 1,000 12oz APP 260+20 80*52*116 1,000 160z 320+20g PE 90*60*132 1,000 16oz APP 300+20 90*60*132 1,000
2040/1530 thin mild steel sheet CNC plasma table cutting machine is especially designed for thin steel plate ( 0-3 mm )fast cutting. It adopts cylinder compacting system to prevent steel plate moving during cutting. It has a very fast cutting speed for the thin plate. 2040 1530 thin mild steel sheet CNC plasma table cutting machine features: 1. The beam uses light structural design, with good rigidity structure, light deadweight and small movement inertia. 2. STARFIRE control system, the file incision and export automatic correction , real-time tracking detection of plasma power in the process of cutting current. The control system uses the U-disk exchange processing document, easy to operate. 3. Z axis adopts Cylinder pressure, so high precision and long life time using are assured. 4. It can apply to iron sheet, the aluminum sheet, the galvanized sheet, hundred steel plates , metal plates and so on. Equipped with other metal equipment, forming the advertising word processing tubeline. Completely solve the traditional manual processing methods. Improve the efficiency of several times. 5. Cutting kerf is small, tidy, and avoid a second dressing processing. 6. High cutting speed, high precision, and low cost and cheap. 7. Support FASTCAM, Astronautics Haire, ARTCAM software, Type3 produce standard G code way document, also can change software to read AUTOCAD software produce DXF form documents. Applicable Materials: Especially for all kinds of metal materials such as steel, copper, aluminum and stainless steel that thickness less than 8mm cutting. 2040 1530 thin mild steel sheet CNC plasma table cutting machine parameters: Model RB 1560 2040 Working area (X-Y) 1500mm*6000mm, 2000mm*4000mm Working material Iron, Steel, Aluminum, sheets, Galvanized, sheets. Titanium, Plates Working Thickness 0-8mm Cutting Speed 0-12000mm/min Power 8.5kw Input Voltage 380V 50HZ/60HZ Plasma Current 63A Connecting Way USB Working Mode Untouched arc striking Cooling method With water pump and tank provide circulating water cooling Rail guide HIWIN square rails Transmit way Taiwan imported ball screw Operation language Chinese or English Command G code, *uoo, *mmg, *plt Optional power source America HYPERTHERM or China HUAYUAN Spare parts Electrode ,Electricity nozzle and Water jacket
High quality single tag printe ribbons reinforced wear-resistant label printer enhanced hanging tag printer ribbons barcode paper label paper 2023 Hot Sale New Arrival Wax Resin Thermal Transfer Printer Ribbons for Barcode Printer Heat transfer printing ribbons have a wide range of applications and high-speed printing capabilities Excellent image durability, excellent wear resistance, corrosion resistance, and heat resistance Product features: 1.Excellent high-quality and high-speed printing performance. 2.Excellent wear resistance, heat resistance, corrosion resistance, and durability. 3.The label has a wide range of adaptability and meets various demanding environmental requirements. 4.High sensitivity ensures excellent image printing results. 5.The anti-static coating on the back can effectively protect the print head. 6.Applicable substrates: water washed standard materials, fabrics, nylon standards, acetate fibers, etc. Product specifications: Basic maximum width: 100%; a: 40, 60, 70, 80, 90, 110, 130, 170 mm Basic length: 210m, 300m, 450m Carbon tape rolling direction: outer carbon, inner carbon Carbon belt hub: 1 inch, 1/2 inch Shaft bayonet: 180 �° bayonet Note: Carbon belts of different sizes and colors can be customized according to your needs. if you need other specifications, please consult us!+86-13924290301 w w w . d h m t t . c o m sales@g z d h m . c n Printer Consumable-Toner, Ink and Ribbon Cartridges Satin ribbon Ricoh thermal transfer ribbon Ink ribbon printing Manufacturer of standard and custom resin and wax ribbons thermal transfer printer ribbons manufacturer of ribbon Ribbons resists scratching, smearing, flaking, and ultraviolet rays Distributor of printer ribbons Wax and resin thermal transfer ribbons types of ribbon participation ribbon rhinestone ribbon grosgrain ribbon decorative ribbon christmas ribbon wholesale ribbon lavender ribbon custom ribbon organza ribbon halloween ribbon miscarriage ribbon Single tag printer, zx40 ribbon printer, printer ribbon cartridge, digital ribbon printer, brother ribbon printer, thermal printer ribbon, label printer ribbon, satin ribbon printer, epson ribbon printer, zebra printer ribbon, ink ribbon printer, barcode printer ribbon, ribbon out
2.Technical parameters: 1. Box size in the laboratory: DL-120LA W1200 * D1000 * H500 (mm), Approximate dimensions: 2300 * 1300 * 1400mm, 2 standard temperatures, Laboratory temperature: nss acss 35 ± 1 /pass 50 ± 1 Pressure bucket humidity: nss acss 47 ± 1 /pass 63 ± 1 , Salt water temperature: 35 ± 1 It can be heated without water, 3 volumes, Laboratory capacity: 800L Salt water tank capacity: 40L, 4 compressed air, Compressed air pressure: 1.00 ± 0.01kgf/c 5 spray volume: 1.0-2.0ml/80c /h, 6 spray mode: continuous spray, timed spray, programmable spray, intermittent spray, demisting in the box, 7. Power supply: AC220V 50Hz/20A, 8. Material: The entire PVC board is made, and the salt spray testing machine adopts advanced three-dimensional reinforcement technology internally, with a strong and solid structure that never deforms. 9. Water adding method: An automatic water adding system is adopted, which has the function of automatically replenishing the water level when the water level is insufficient, and the test is not interrupted. 10. Nozzle: Precision glass nozzle, salt spray testing machine used for 4000 hours to ensure no crystal blockage. 11. Protection system: Equipped with dual over temperature protection and insufficient water level warning to ensure safe use. 12. Temperature controller: digital display, PID control, high stability platinum temperature probe, error 0.3 13. Heating method: The laboratory adopts direct steam heating method, which increases the temperature quickly and shortens the standby time of the salt spray testing machine. 14. The spray tower is equipped with two conical dispersers, which have the functions of guiding fog, adjusting fog volume, and even fog falling. 15. The pressure bucket adopts Henry's law to heat and humidify, and provide the humidity required by the salt spray testing machine laboratory. 16. Opening method: Pneumatic automatic opening is adopted, The salt spray testing machine is one of the "three prevention" (humid heat, salt spray, mold) testing equipment for artificial climate environments. It is an important salt spray testing equipment for studying the adaptability and reliability of various environments in industries such as machinery, national defense, light industry, electronics, light industry electronics, and instruments. This salt spray testing machine can perform neutral salt spray tests in accordance with GB/T2423.17 "Basic Environmental Testing Regulations for Electronic and Electrical Products - Test Ka: Salt Spray Test Method", and can also perform acetate spray tests. This salt spray tester complies with CNS, ASTM, JIS and ISO standards. The salt spray test is to test the corrosion resistance of the products after coating, electroplating, Anodizing, anti-rust oil and other anti-corrosion treatments on the surfaces of various materials.
The 707-99-67120 seal kit boom cylinder is a replacement kit that is compatible with the PC400-5 Excavator model. This kit contains various seals that are designed to seal the boom cylinder of the excavator, preventing hydraulic fluid from leaking out of the cylinder. A boom seal kit is essential for maintaining the efficiency and safety of the excavator, as hydraulic fluid leakage can lead to reduced performance, increased maintenance costs, and safety hazards. MODEL PART NO PART NAME ROD BORE PC400-5 707-99-67120 BOOM CYL 110 MM 160 MM 707-99-68510 ARM CYL 120 MM 185 MM 707-99-67010 BUCKET CYL 110 MM 160 MM If you are looking for a reliable mechanical parts factory, don't hesitate to contact us!
Specification of Gastec Gas Detection System Detector Tubes/gastec tubes 12LL Tube No.: 12LL Gas to be measured: Hydrogen cyanide(HCN) Measuring Range: 0.2-10ppm Shelf life: 2 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us. Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Specification of Gastec Gas Detection System Detector Tubes/gastech tubes 163LL Tube No.: 163LL Gas to be measured:Ethylene oxide(C2H4O) Measuring Range: 0.1-10ppm Shelf life: 1 year (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us. Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Specification of Gastec Gas Detection System Detector Tubes/gastec stain tube detectors 10 Tube No.: 10 Gas to be measured: Nitrogen oxide(NO) Measuring Range: 2.5-200ppm Shelf life: 3 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us . Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
We would like to introduce ourselves as the leading manufacturer of Automatic Tube Cleaning System and offering such a solution in the HVAC market. The brand name of our product is VOCCSYS. Our product can help save up to 20% energy in HVAC chillers. VOCCSY offers a very promising online solution to mitigate scaling/fouling problems in condenser tubes for HVAC/ industrial process resulting into substantial energy savings to the clients. The patent pending VOCCSYS�® works on the principle of injection and collection of Sponge Balls into the condenser tubes thereby maintaining the condenser tubes clean. Features: 1. Completely Automatic 2. Zero Ball Loss System 3. Reliable Single Pump Control 4. Easy Ball Monitoring and Replacement 5. Intuitive Multi-color Touchscreen HMI 6. Customized Operating System for each Customer 7. Continuous Online-Cleaning 8. Smart System displays alarm for ball replacement Benefits: 1. Energy Savings up to 20% in Chillers 2. Optimizes Heat Transfer Performance 3. Increase in Cooling Capacity of HVAC Chillers 4. 100% Clean Tubes 5. No Downtime from Maintenance 6. Extends Equipment Life 7. Eliminates Manual Cleaning 8. Eliminates need for Harmful Chemicals 9. Reduces Carbon Footprint 10. Effective Technology with short Return-on-Investment
Specification of Gastec Gas Detection System Detector Tubes/gastec tube detector 35 Tube No.: 35 Chemical formula to be measured: Sulphuric acid( H2SO4) Measuring Range: 0.5-5mg/m3 Shelf life: 2 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customer's exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
4 Rails Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:14A(Diode 25A); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP67;Safety degree:II; Flame Class:UL94-V0;Diode Number:Each 1PC; Ambient temperature range:40 85 (IEC); Upper limiting temperature:110 (IEC); Suitable cable cross sections:2.5-6mm2 (14-10AWG); Range of cable gland(mm):O.D.:4.8-6.2; Ribbons size(mm):6(W) 0.2-0.4(T);Connection of bus ribbons:Clamp.
6 layers, 9 layers or 5 layers + 1 layer laminated (PE) production is made from 100% cellulose paper. It adds elegance, elegance and hygiene to your presentations with its completely biodegradable and recyclable, liquid absorbing feature, smooth whiteness and soft texture.â?? Our products; It is also produced in special molds and printing machines from m2 122 gr bobbins, overlapped, glued and laminated (PE) or simply layered glueless and unlaminated (PE). 80 mm 90 mm 120 mm diameter
Caltta PH700 DMR Portable Radio Caltta PH7, a professional digital radio system series working with the DMR Tier III system, helps to keep professional users connected. It comes with an ergonomic design, rich digital functions, and remarkable quality to increase management efficiency and enable customers to be responsive to emergencies. Features of PH700 DMR Portable Radio Digital and Analog Compatible Compatible with both digital and analog trunking and conventional systems, supports smooth analog-to-digital network migration. Excellent Audio Performance 2W high-power loudspeaker with noise reduction design ensures a clear and loud voice even in noisy environments. High-capacity Battery for Long-time Work The standard 2000mAh battery with the power-saving design of digital technology supports 16-hour working in the 5:5:90 working mode. Reliable Quality IP68 and MIL-STD 810G rated, resistant to water, extreme weather, and drop and shock at various levels. Higher Safety The digital standard and deeply customized OS provide high safety. Professional users can use hardware encryption cards to encrypt voice and achieve better safety performance. Full Encryption Support 40bit basic encryption. 128/256bit AES encryption is optional. Easy software settings ensure that the call is foolproof. Dispatching Services PH700 DMR compatible radios support multiple dispatching services, such as registration, radio check, lone worker, and remote stun/revive to realize remote dispatching and meet daily work management needs. Clear Voice Prompt The voice prompt informs users of news and information immediately. Other Features In addition to basic Tier III DMR voice and data services, PH700 also supports many optional features such as GPS, Bluetooth, voice recording, advanced encryption, and ECS (Enhanced Conventional System).
Introduce: Eye Type Webbing Sling This product is W01 Type. It has two layers and eyes. The color, width, and length can be customized. We can provied suittable solution for you. Advantages: 1. Safety Factor: 5:1, 6:1, 7:1 2. Certifications: Perform with EN standard, American standard, Australian standard. Products with CE GS certifications. 3. High quality: Strict quality control, Authoritative testing report can be provided. 4. Product Advantages: High-strength, anti- slip, wear- resistant, high temperature resistant, soft, light, no harm to the cargo, safety, long life, etc. 5.Standard: Standard EN1492-1:2000+A1:2008 Webbing sling is made by weaving machine, spliced smoothly and solid. It divided into double/two layers . It can be provided in a smooth wide surface when lifting goods . They also can match the protection material in order to reduce the damage.