More Auto Spare Parts In Offer Variety Auto Bulb Holder, Bulb Socket, Hid Connector, Wiring Harness Material:pottery, Ceramic, High Temperature Resistance Straight/curved Available Waterproof Better Resistance To Vibration High Safety Long Life Time Defferent Color Available.
Wire Harness Probe Pogo Pin CHD136 for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of the automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHD136 harness probe we will introduce here is 1.36 mm in diameter and 33 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4.6 mm at most when this probe works, although the plunger can move as far as 7 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4.6 mm, its loaded force is about 255 gf, namely 9 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 7 mm Rated Stroke: 4.6 mm Spring Force: 255�±75 gf (9 oz) at load 4.6 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: Beryllium Copper, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Wire Harness Probe Pogo Pin CH203 Series for Electronic Test Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CH203 harness probe we will introduce here is 2.03 mm in diameter and 35.9 mm in total length. Its barrel is made of phosphor bronze plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of stainless steel plated with gold and nickel. This probe can withstand up to the current 5 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 5 mm at most when this probe works, although the plunger can move as far as 7.75 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 5 mm, its loaded force is about 145 gf, namely 5.5 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 5 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 7.75 mm Rated Stroke: 5 mm Spring Force: 145 ±43 gf (5.5 oz) at load 5 mm Materials (plated) Barrel: Phosphor Bronze, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SUS, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Wire Harness Probe Pogo Pin CHL165 for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHL165 harness probe we will introduce here is 1.65 mm in diameter and 35.4 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 100 milliohms. It is suggested the plunger be pressed at a distance of 3.5 mm at most when this probe works, although the plunger can move as far as 5.3 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 3.5 mm, its loaded force is about 113 gf, namely 4 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 100 milliohms Full Stroke: 5.3 mm Rated Stroke: 3.5 mm Spring Force: 113�?�±35 gf (4 oz) at load 3.5 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Wire&Harness with 3P connector DESCRIPTION 124667-01: Wire&Harness with 3P connector (1) Wire: UL1015 AWG16 (black, green, yellow and white) (2) Terminal: MOLEX-02-09-1102, MOLEX-19007-0024, MOLEX-19007-0053, MOLEX-19073-0088 (optional domestic alternatives) (3) Connector: MOLEX-19-09-1039 (optional domestic alternative) (4) Length: L = 737.87mm (29.05 In)
Tape width:2-40mm Taping length:0-600mm/second Wire diameter:0.1-40mm    Installation 1. Place the harness taping machine to the working area. 2. Make sure the machine is horizontal before fixed. 3. Conect the power cabel with foot switch.  Operation 1. Put the tapes into the tape rack. 2. Turn on the machine with "ON/OFF" button. 3. Select an operation mode with "AUTO/MANU" button. 4. Set a required speed. 5. Rotational speed should be defined under AUTO mode.
A&S Construction Machinery Co., Ltd. supplies all types of cables. All the brands of cables we can provide: CAT cables, KOMATSU cables, JOHN DEERE cables, SANY cables, XCMG cables, VOLVO cables, HITACHI cables, SUMITOMO cables, LIEBHERR cables, DOOSAN cables, CASE cables, BOBCAT cables, KUBOTA cables, YANMAR cables, HYUNDAI cables, DAEWOO cables, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
Plaster mesh.Plaster mesh
Copper content 40% Quantity 42000 Pounds(LBS)
Harnesses for auto industry, for boats.
Wire Harness Probe Spring-loaded Pogo Pin CHZ136-J Series Applied to Electronic Test Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHZ136-J harness probe we will introduce here is 1.36 mm in diameter and 32.8 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4.6 mm at most when this probe works, although the plunger can move as far as 6.9 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4.6 mm, its loaded force is about 130 gf, namely 4.5 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 6.9 mm Rated Stroke: 4.6 mm Spring Force: 130�?�±40 gf (4.5 oz) at load 4.6 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Wiring harnesses, wire connections, plastic molded components.Wiring harness design and development
Wire Harness.
We are manufacturer of UL style wires and cables. Customized according to standards
Lightweight, comfortable air-mesh harness for small and medium size dogs Function & Design Lightweight, air-permeable Air-Mesh outer material, when dipped in water can be cooling in the summer Air-Mesh Harness, quick and easy to put on Adjustable in size with Velcro closure and push button clasp/buckle with sound bumper, makes it Cross-stitched nylon straps for optimal tension distribution and protection against neck injuries -Two lightweight D-rings for securely attaching a leash Reflective elements on the neck and legs for additional safety in darkness Available in 6 sizes and 8 colors, from 24cm (9.44in) to 54cm (21.25in)Chest circumference Every Harness has macth color leashes. Sold separately Suitable between 1,5kgs- 12kgs for all dogs Handwash only %100 made in Turkey
OMG is committed to becoming a world-class provider of cable solutions for new energy vehicles, and was rated as one of the top 100 enterprises in core parts of electric vehicles in 2017. This product has been widely used in Dena, Amphenol, Te, Yutong, Ningde times, BYD and other companies OMG has passed ISO 9001:2015 and IATF 16949:2016 system certification. Omigr 's in car high-voltage cable products comply with international standards such as iso6722-1, iso6722-2, iso14572, LV216, iso19642 and UL758. At the same time, it also widely produces domestic standard products dominated by QC / t1037. On this basis, it also launched enterprise standards higher than industry standards and rose to local standards in Guangdong Province, The standard number is DB44 / T 2100-2018. In addition, it can widely produce some customized products. Conductor materials include bare copper, tinned copper, aluminum alloy and other conductor types. The product is soft and the bending radius is less than 5D; High and low temperature resistance, oil resistance, acid and alkali resistance, water resistance, wear resistance, cracking resistance and UV resistance; Good flame retardant performance; Good conductivity and small conductor temperature rise; All materials comply with rohs2.0 environmental standards.
ECU Conversion Harness Custom Ecu Wiring Harness Harness Supplier In China Solution for Automotive Wiring Harness With years of experience in wire harness manufacturing, Kinkong Wire Harness can provide complete solutions for a wide range of different applications in the automotive industry. We produce wiring harness for engine, light & lamp, sensor, ignition coil, accelerator pedal, fuel injection, car radio, chassis, etc, but not limited to the above mentioned. Weâ??re looking forward to getting inquiry from you.� Click here� to find out more.� Overview Kinkong Wire Harness is a derivative brand of KINKONG, mainly focus on the custom wire harness assembly and over-molding service for after-market and tuning-market in the vehicle industry, including cars, motorcycles, racing cars, agricultural machinery, mining machine, ATV, superbikes, scooters, e-bikes, sea-doo, Can-Am... We began from very small pigtail harnesses and have grown to be a very specialized and quality-ensured wiring manufacture for more intricate wiring harnesses, from auto lamp harness, engine harness, to chassis harness, and all the customized harness if needed. Our mission is to provide our customers with super qualified products & services with a low total cost of ownership to help our customers gain a big advantage in this cut-throat competitive contemporary world. To ensure the quick turn around time, we make huge stock of connectors, terminals, wire seals, wires, PVC, clips...at all times to react quickly. We even have our own tooling workshop and 3D prototyping technology to make custom components, which better assists the custom wiring process. Vehicle Wiring Harness Manufacturer specializes in providing Customized Car Wiring Harness, you have any question on Cable Harness, Automotive Wire Loom, Wiring Loom. We will give the professional answers to your questions.
fuse box cable harness Vehicle Wiring Harness Manufacturer harness supplier in china Solution for Automotive Wiring Harness With years of experience in wire harness manufacturing, Kinkong Wire Harness can provide complete solutions for a wide range of different applications in the automotive industry. We produce wiring harness for engine, light & lamp, sensor, ignition coil, accelerator pedal, fuel injection, car radio, chassis, etc, but not limited to the above mentioned. Weâ??re looking forward to getting inquiry from you.� Click here� to find out more.� Vehicle Wiring Harness Manufacturer specializes in providing Customized Car Wiring Harness, you have any question on Cable Harness, Automotive Wire Loom, Wiring Loom. We will give the professional answers to your questions.
features: Resistant to shock Seamless finish Precisely designed Top notch quality Heat resistant Crack proof finish Quick release design High wearing strength SKU: woo-beanie-1 Categories: Accessories, Cable harness Description Additional information Reviews (0)
features: Resistant to shock Seamless finish Precisely designed Top notch quality Heat resistant Crack proof finish Quick release design High wearing strength SKU: woo-beanie-1 Categories: Accessories, Cable harness Description Additional information Reviews (0)
