Model name V600 Rated power 600w Max power 700w Output voltage 24v Start wind speed 2.0m/s Rated wind speed 13m/s Working wind speed 2-45m/s Gross weight 15kg Rotor diameter 1.85m Blade number 3 Blade material Cfrp Generator Three-phase permanent magnet synchronous generator Control system Manual&electromagnetic brake Tower pole type 6m Capacity and quantity of battery(reference) 12v100ah 2pcs Can supply power for Lighting, electric fan, tv, washer. 98*58*26cm 18kg.
Rotor diameter: 8.0m Blades quantity: 3pcs Direction: Always downwind Blades material: Carbon fiber reinforced plastic Rated output power: 10000w Maximum output: 12500w Working voltage: Dc240v/500v, ac220v/380v Annual average energy production: 20mwh (in rate 5m/s wind speed) Working wind speed: 3-35m/s Initial wind speed: 2.0m/s Nominal wind speed: 10.8m/sï¼?36.4mphï¼? Storm-stand: Up to 55m/s Max rotate speed: 160r/min Wind turbine type: Three-phase, pmg alternator Working temperature: From -40 to +60 c Blade pitch control Variable pitch-www.Windpowercn.Com Over-speed protection Aerodynamic brake + electromechanical disc brake Shut down methods Positive blade pitch Gearbox: None, direct drive
PARAMETER VERTICAL WIND TURBINE MODEL NUMBER WKV-1000 Rated Power 1KW Size(Height / Diameter) 2.1/2(M) Blades Material aluminum alloy Start-up Wind Speed 1m/s Minimum Power Generation Wind Speed 2m/s Cut-in wind speed 3m/s Rated Wind Speed 13m/s Cut out Wind Speed 15m/s Survival Wind Speed 60m/s Generator Type AC, 3 phases Controller Output Voltage 24V/48V Controller Braking System 3-Phase short circuit by NFB brake Ambient Temperature .-30;C more information please check the video on youtube: https://youtu.be/ddESkPg64zw
Wind turbines
Generator Rating 50KW 59 rpm 50HZ/60HZ Windward way: upwind mode & down wind mode (recommend type is downwind mode) Induction motor: 55KW 1500RPM provided by SIEMENS(CHINA) Gear box type: level helical Service factor: 2.1 Weight: 3000kgs Blades Material: Fiberglass reinforced polyester Rotor diameter: 13.8m Swept area: 150m2 Weight: 240kgs Controller: Mitsubishi PLC Schneider contactor GPRS/ADSL remote control Touch screen interface . IP65 cabin Protection Mode High speed shaft brake--failure type brake Low speed shaft brake--disk brake Yawing brake--disk brake Operational Data Start-up wind speed: 2.5m/s Rated wind speed : 12.5m/s Cut-out wind speed: 20m/s Survival wind speed: 45m/s Tower Tower type:24m free standing tower Material: Hot dip galvanized steel Weight: 4200kgs. Plywood Cases And Weave Bag.
Parameter Rated power(W) : 10000 Rated voltage(DCV) : 240 Rated current(DCA) : 42 Rotor diameter(m) : 8.0 Blade material : GFRP Rotation direction : Clockwise Start-up wind speed(m/s) : 2.5 Rated wind speed(m/s) : 10 Cut-out wind speed(m/s) : 16 Survival wind speed(m/s) : 45 Net weight(T) : 1.0 Wind turbine type : Upwind Rated Rotating speed(RPM) : 180 Blades No. : 3 Hydraulic tower height (m) : 12 Yaw mechanism : Electrical Annual yield(kwh) : 24000 Yaw mode : Auto/manual Efficiency : 0.85 Wind turbine tilt-angle : 6¡ã Protection mode : Yaw -Hydraulic brake -Dumpload. Plywood cases and weave bag.
Model S-600 Rated voltage dcv : 24 Rated current dca: 25 Rated power w : 600 Start-up wind speed m/s : 2.5 Rated wind speed m/s : 9.5 Security wind speed m/s : 45 Protection mode :Dump load Generator type : Pmg Rotor diameter m : 1.6 Blades quantity pcs : 3pcs Nacelle material : Carbon reinforced fiberglass Blades material : Carbon reinforced fiberglass Designed life time year :15 Warranty(year) : 2. Plywood cases and weave bag.
Basic Parameters rated Power(kw) 15 Survival Wind Speed(m/s) 45 Max Power(kw) 16 Working Wind Speed(m/s) 1-25 Rated Voltage(v) 384/560 Rated Wind Speed(m/s) 9 Rated Rotation(r/min) 200 Blade Length(m) 4.30 Cut-in Wind Speed(m/s) 1 Blade Material FRP Cut-out Wind Speed(m/s) 25 Generator Life(year) 20 Some Key Technology Control Method Adjust speed method centrifuge variable pitch Brake Method electromagnetic Generator Generator Configuration 3-phase 380/220v 50/60hz Generator Type 3-phase permanent magnet Protect Class IP54
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.
Green energy---5kw wind turbine Model number: fd6.0 íºc 5kw Rotor blade diameter: 6.0m Number of blades: 3pcs Materials of blade: glass fiber Rated rotation speed: 200(r/m) Type of generator: permanent-magnet 3 phase ac Rated power: 5000w Max power: 7000w Output voltage: 220v Cut-in wind velocity: 3(m/s) Rated wind velocity: 10(m/s) Working wind velocity: 3-30(m/s) Survival wind velocity: 50(m/s) Monopole tower height: 8m Output controlling system: electrified controller & inverter Recommended batteries: 12v100ah, 18 pieces Can load: light, fan, charger, tv, pump, washer, refrigerator, electric cooker and air conditioner Authentication: ce and iso certificate Iso, ce, tuv
Wind turbine Specifications : Rated output power: 500w Rotor blade diameter: 2.7m Start up wind speed: 2.5m/s Rated wind speed: 7m/s Max output: 1000w Output voltage: ac 220v dc 28v Generator weight: 6.5kg Temperature: +45pc Speed protection: tower leaned Four parts
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
rated output¡êo600w épeak output¡êo1100w ¡érated voltage¡êo24v ¡éstart-up speed (m/s)¡êo0.20.4 ;¡écut-in speed (m/s)¡êo1.3 ;¡érated wind speed (m/s)¡êo10 ¡éworking wind speed (m/s)¡êo1.25 8¡ésurvival max. Wind speed (m/s)¡êo40 9¡érotor diameter¡êo|¦ì1.7m 10¡énumber of blade¡êo3pcs 1blade material¡êoaviation duralumin 1éworking temp range¡êo-30æ50æ As buye's request
We have a total of more than 500 sets of equipments, can produce various flanges forgings and bearings that outside diameter Qualification certificate :
Technical specification: Our generator is the most advanced in the world. It is coreless and brushless; its starting torque is very low and high efficiency. Advantages of our product: Coreless motor High-stability Nd-Fe-B materials Low Speed of wind of starting up Low rated speed/Higher Reliability etc. Win The products are made of high-stability Nd-Fe-B materials. The specific outer rotor magnetic circuit is designed in a way that the products have high generating efficiency, light weight, low starting torque, appealing appearance, easy installation and higher electric performance and use performance than kindred products. (1) Patent Technology: use newest ¡°Precise Coil¡± technology, make it more international competitive. (2) Original Structure: use disc coreless motor to take place traditional motor makes it less volume and weight. (3) Higher Utilization: use special coreless motor technology to eliminate the use bottlenecks of lower speed wind energy. (4) Higher Reliability: special structure make it bigger ratio of power to volume, power to weight and have long life of 8 times longer than traditional motor. (5) Gearless, direct drive, low RPM generator. (6) High standard, quality components for use in harsh and extreme environments for wind turbines (7) High efficiency and Low mechanical resistance energy loss (8) Excellent heat dissipation due to the Aluminum alloy outer frame and special internal structure. Gen. Diameter mm 220 Gen. Length mm 212 Gen. Weight kg 8.5 Shaft. Diameter mm 30.
Technical specification: Our generator is the most advanced in the world. It is coreless and brushless; its starting torque is very low and high efficiency. Advantages of our product: Coreless motor High-stability Nd-Fe-B materials Low Speed of wind of starting up Low rated speed/Higher Reliability etc. Win The products are made of high-stability Nd-Fe-B materials. The specific outer rotor magnetic circuit is designed in a way that the products have high generating efficiency, light weight, low starting torque, appealing appearance, easy installation and higher electric performance and use performance than kindred products. (1) Patent Technology: use newest ¡°Precise Coil¡± technology, make it more international competitive. (2) Original Structure: use disc coreless motor to take place traditional motor makes it less volume and weight. (3) Higher Utilization: use special coreless motor technology to eliminate the use bottlenecks of lower speed wind energy. (4) Higher Reliability: special structure make it bigger ratio of power to volume, power to weight and have long life of 8 times longer than traditional motor. (5) Gearless, direct drive, low RPM generator. (6) High standard, quality components for use in harsh and extreme environments for wind turbines (7) High efficiency and Low mechanical resistance energy loss (8) Excellent heat dissipation due to the Aluminum alloy outer frame and special internal structure. Gen. Diameter mm 152 Gen. Length mm 169 Gen. Weight kg 3.8 Shaft. Diameter mm 20.
Technical specification: Our generator is the most advanced in the world. It is coreless and brushless; its starting torque is very low and high efficiency. Advantages of our product: Coreless motor High-stability Nd-Fe-B materials Low Speed of wind of starting up Low rated speed/Higher Reliability etc. Win The products are made of high-stability Nd-Fe-B materials. The specific outer rotor magnetic circuit is designed in a way that the products have high generating efficiency, light weight, low starting torque, appealing appearance, easy installation and higher electric performance and use performance than kindred products. (1) Patent Technology: use newest ¡°Precise Coil¡± technology, make it more international competitive. (2) Original Structure: use disc coreless motor to take place traditional motor makes it less volume and weight. (3) Higher Utilization: use special coreless motor technology to eliminate the use bottlenecks of lower speed wind energy. (4) Higher Reliability: special structure make it bigger ratio of power to volume, power to weight and have long life of 8 times longer than traditional motor. (5) Gearless, direct drive, low RPM generator. (6) High standard, quality components for use in harsh and extreme environments for wind turbines (7) High efficiency and Low mechanical resistance energy loss (8) Excellent heat dissipation due to the Aluminum alloy outer frame and special internal structure. Gen. Diameter mm 165 Gen. Length mm 183 Gen. Weight kg 3.8 Shaft. Diameter mm 25 conicity: 1:10.
Technical specification: Our generator is the most advanced in the world. It is coreless and brushless; its starting torque is very low and high efficiency. Advantages of our product: Coreless motor High-stability Nd-Fe-B materials Low Speed of wind of starting up Low rated speed/Higher Reliability etc. Win The products are made of high-stability Nd-Fe-B materials. The specific outer rotor magnetic circuit is designed in a way that the products have high generating efficiency, light weight, low starting torque, appealing appearance, easy installation and higher electric performance and use performance than kindred products. (1) Patent Technology: use newest precise Coil¡± technology, make it more international competitive. (2) Original Structure: use disc coreless motor to take place traditional motor makes it less volume and weight. (3) Higher Utilization: use special coreless motor technology to eliminate the use bottlenecks of lower speed wind energy. (4) Higher Reliability: special structure make it bigger ratio of power to volume, power to weight and have long life of 8 times longer than traditional motor. (5) Gearless, direct drive, low RPM generator. (6) High standard, quality components for use in harsh and extreme environments for wind turbines (7) High efficiency and Low mechanical resistance energy loss (8) Excellent heat dissipation due to the Aluminum alloy outer frame and special internal structure. Gen. Diameter mm 196 Gen. Length mm 193 Gen. Weight kg 5.8 Shaft. Diameter mm 25.
Technical specification: Our generator is the most advanced in the world. It is coreless and brushless; its starting torque is very low and high efficiency. Advantages of our product: Coreless motor High-stability Nd-Fe-B materials Low Speed of wind of starting up Low rated speed/Higher Reliability etc. Win The products are made of high-stability Nd-Fe-B materials. The specific outer rotor magnetic circuit is designed in a way that the products have high generating efficiency, light weight, low starting torque, appealing appearance, easy installation and higher electric performance and use performance than kindred products. (1) Patent Technology: use newest ¡°Precise Coil¡± technology, make it more international competitive. (2) Original Structure: use disc coreless motor to take place traditional motor makes it less volume and weight. (3) Higher Utilization: use special coreless motor technology to eliminate the use bottlenecks of lower speed wind energy. (4) Higher Reliability: special structure make it bigger ratio of power to volume, power to weight and have long life of 8 times longer than traditional motor. (5) Gearless, direct drive, low RPM generator. (6) High standard, quality components for use in harsh and extreme environments for wind turbines (7) High efficiency and Low mechanical resistance energy loss (8) Excellent heat dissipation due to the Aluminum alloy outer frame and special internal structure. Gen. Diameter mm 260 Gen. Length mm 192 Gen. Weight kg 11 Shaft. Diameter mm 30.
Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise. Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise;packed in plywood case.
