Name:Sodium thiosulphate Pentahydrate Molecular formula:Na2S2O3.5H2O CAS: 7772-98-7 Molecular weight:248 Properties: Monoclinic crystal, Melting point: 40-45â??, Relative Density: 1.729(17â??). Use: 1. used in photographic processingas a photographic fixer 2. electroplate applications in steel, as part of patina recipes for copper alloys 3. used in the tanning of leather 4. in PH testing of bleaching substances 5. in Waste water treatment, neutralizing bleached and chlorinated water. 6. to lower chlorine levels in swimming pools and spas following super chlorination 7. used in bleach 8. used in paper industry 9. used to remove iodine stains, e.g. After the explosion of nitrogen tri-iodide. 10. used in aquaculture Packing: 25KG pp bags, 1MT/1.25MT jumbo bags
China manufacturer 25mm pvc foam board for construsion PVC celuka foam board is new material of environmental protective plastic material which in stead of woods and steels. Comparing to woods, It has many advantages: light, flexible, anti-flame, alkali-acid resistance, moisture proof, water proof, good heat preservation, sound insulation, shock absorption etc. can be filmed or printed colorfully, and it can be processing easily. Thickness: Density : specification1220mm*2440mm PVC celuka foam board mechanical property: project unit Index Apparent density Kg/ m3 500-850 Schauder hardness D55 Water absorption 1.0 Tensile strength Mpa12 free beam Impact strength kjm214 Elongation rate at break %12 Heating size variance ration % 2.0 Vicat softening strength C73 Bending strength Mpa22 Modulus of elasticity in bending Mpa650 Screw holding capacity N580
PVC celuka foam board is new material of environmental protective plastic material which in stead of woods and steels. Comparing to woods, It has many advantages: light, flexible, anti-flame, alkali-acid resistance, moisture proof, water proof, good heat preservation, sound insulation, shock absorption etc. can be filmed or printed colorfully, and it can be processing easily.PVC celuka foam board features: 1 Strong and durable 2 Lightweight and easy to install 3 Not easy to scratch 4 Will not rot, warp, delaminate, cup or twist 5 Resistant to weathering, shock and abrasion 6 Salt water corrosion resistant 7 Impervious to salts, insects and many chemicals, including some acids 8 Doesn't mold 9 Can be worked just like wood 10 Non-toxic 11 100% recyclable 12 Fire-retardant(self-extinguishing) 13 Easy to clean and virtually maintenance free
PVC celuka foam board is new material of environmental protective plastic material which in stead of woods and steels. Comparing to woods, It has many advantages: light, flexible, anti-flame, alkali-acid resistance, moisture proof, water proof, good heat preservation, sound insulation, shock absorption etc. can be filmed or printed colorfully, and it can be processing easily. Recommended size for the bathroom and kitchen cabinet 3mm,5mm for the cabinet back panel. 8mm for the bottom panel of drawer. 12mm for the drawer frame and the internal shelf. 15mm for the cabinet body, side panel or door panel. 16mm,18mm for the sink cabinet of kitchen cabinet. 18mm for door panel. 25mm foe door panel in case of routing.
Used in conjunction with special purpose pallet handling equipment which may require guidance, by electronic wire or by steel rail. Pallet support rail is punched and roll formed, so it has the character of long inertial distance/strong load capacity. Be used in food industry, chemical industry, clothes industry and freeze warehouse and so on. Picking direction has single and double rows. Single one (near wall) depth is not exceed 6 pallet depth. Double one(middle area can pick goods) depth is better control in 12 pallet depth. This kind system usually not exceed 10 meter high. To fasten it, not only need the strong structure, but also need to add fix equipment. Goods is better not too big and too weight, usually less than1500kg. The width is not excees 1.5 meter. And can work in trucks.
Features: 1). Longer length shelving with a heavier weight loading. 2). Up to 1000kg weight loading per level. 3). A choice of 2 heights, 3 depths and 4 lengths to maximize your storage space. 4). All shelves or beams can be adjusted freely every 50mm. 5). Shelves or panels can be made from Wire Mesh or moisture-resistant steel board. 6). Consists of upright frames, beams and shelves. 7). Easily assembled in minutes. 8). Powder coated paint finish. 9). Extra shelves easily added. 10). Increase your storage space by adding extension units. 11). Especially suitable for those small in size but large quantity products like retailing industry.
Orange Oil Cold Pressed & D-Limonene 03165 Oil : Citrus sinensis (L.) Pers Fob price : USD 10,25 - 10,75 per KG, USD 9,25 - USD 9,75 per KG Product origin :Brazil Specifications : CAS # 5989-27-5 FEMA# / EINECS# 2633 / 307-891-8 FDA#182.20 (GRAS) Harmonized# 330112900 Shelf life 18 months. CAS # 8008-57-9 FEMA# / EINECS# 2825/ 307-891-8 FDA# 182.20 (GRAS) Harmonized# 330112000Shelf life 18 months. Minimum Order Size and Packgaing details : Packing 200 L (173.kg.nett) Steel drums coated with a food grade epoxy Notes : Certification Kosher/Passover-Parve
Why Choose Us 1. 20 Years Professional Experiences in Hydraulic Hose & Hydraulic Seal 2. Imported Italian VP Hydraulic Hose Production Line 3. High Quality Material from Nantex & Cabot 4. Strict Quality Control, Every Piece of Product Will Be Inspected before Shipment 5. Approved by ISO9001:2008, ISO14001:2008 and OHSAS18001:2007 6. Professional Technical Guide and Support 7. OEM Service 8. Shorter Lead Time Production Details This hose is consisted by one layer oil resistant inner rubber hose, one/two layers steel wire braided reinforcement layer and one layer oil and weather resistant synthetic rubber.
Why Choose Us 1. 20 Years Professional Experiences in Hydraulic Hose & Hydraulic Seal 2. Imported Italian VP Hydraulic Hose Production Line 3. High Quality Material from Nantex & Cabot 4. Strict Quality Control, Every Piece of Product Will Be Inspected before Shipment 5. Approved by ISO9001:2008, ISO14001:2008 and OHSAS18001:2007 6. Professional Technical Guide and Support 7. OEM Service 8. Shorter Lead Time Product Details This hose is consisted by one layer oil resistant inner rubber hose, one/two layers steel wire braided reinforcement layer and one layer oil and weather resistant synthetic rubber. Quality Control Before leaving the factory, Kelong's all products will be inspected by quality inspector, we must ensure all products with high quality for you.
Basalt Rebar Basalt rebar is a perfect material for civil and industrial construction with continuous spiral ribbing formed by means of winding by basalt strip oiled in highly durable polymeric compound. Basalt Rebar is an alternative to steel and fiberglass for reinforcing concrete. Basalt Rebar is demanded in the construction market, nevertheless, many people are not even aware of its existence. The material has many useful features which are essential for modern construction, due to which it is in serious competition even with metal. A basalt rebar consists of numerous basalt filaments, which being bound to each other, create a durable and a strong bond, thereby forming an excellent material for construction. Despite the fact, that for a long time, the rebars for the construction, have been made entirely of metal, recently the situation has dramatically changed, as basalt has also become a prospective one, which means that its quality and features will be improved with time.
PE Coated Lean Tube (KJ-2010RE) Coated Pipe China Coated Pipe, PE Coated Lean Tube, ESD Lean Pipe for Pipe Rack System Lean pipe for pipe rack systems, other name is lean tube, come of TOYOTA company, used for lean production, manufact line, warehouse, famly, office etc. The detailed for lean pipe: Name lean pipe No. KJ-2810RE Thickness 0.7, 0.8, 1.0, 1.2, 2.0mm Material antirust(inside) + steel pipe(middle) + plastic coated(outside) Packing 10 pieces packing in two film Surface treatment black,bule,ESD,red,ivory,wihte etc. OD 28mm The advantage of lean pipe 1)Sample and easy to operate. 2) High glossy and have different loading capacity. 3) It can be re-used again and again Meat joints
HDPE Pipe for Drawing Out Methane Tengyuan HDPE mining pipes are made of special polyethylene-based raw materials with flame-retardant and anti-static properties. And all of the pipes are produced by advanced production equipments through extruding technique at high temperature. We arrange production and inspection in accordance with national coal industry standard MT588.1-2005 (the first part of plastic mining pipe: PE pipe),MT181-88 "safety inspection specification of plastic mining pipes" and AQ1071-2009 "safety technical requirements for non-metallic gas transmission mining pipe" .We obtain the coal mine safety signs (MA)for polyethylene mining pipes. Looking for HDPE mining tailing pipe, HDPE Pipe for Drawing Out Methane, Mining Pipe and HDPE steel mesh reinforced pipe? We views innovation as the driving force of sustainable development and creates value for society, customers, shareholders, employees.
HDPE Irrigation Pipe PE pipe is widely used in the field of sewage, water supply, drainage and water transportation attribute to its high strength, high temperature resistance, corrosion resistance, non-toxic and wear-resistant. The irrigation pipe made from PE material contains low density PE pipe, medium density PE pipe and high density PE pipe. As the PE polyethylene pipe has the characteristics of wear resistance, acid proof, corrosion resistance, high temperature resistance and high pressure resistance, it gradually replaced the position of the traditional pipe, such as steel pipe and cement pipe, especially for its light weight and convenience to install and move, it is the first choice of the new material. Tengyuan is a manufactuere of HDPE irrigation pipe fittings, Elbow Pipe Fitting and HDPE irrigation pipe. We are committed to improving the efficiency and safety of fluid delivery, realizing a healthier and more wonderful world.
Description ERW508 H.F. Straight Welded Pipe Production Line ERW508 high frequency longitudinal welded pipe production line / pipe making machine / tube mill is designed to produce welded pipes of 273mm-508 mm in OD and 6.0mm-18.0mm in wall thickness, as well as corresponding square and rectangular pipe. Products: architectural structure pipes, API pipes, tower footing tubes, automobile beam steel pipe and other products. Equipment advantages ZTF forming process save roller up to 60% With direct square forming technology, one set of roller can produce all pipe sizes Electric control and automatic adjustment, high precision,high roller change speed
Description ERW140 H.F. Straight Welded Pipe Production Line ERW140 high frequency longitudinal welded pipe production line / pipe making machine / tube mill is designed to produce welded pipes of 60mm-140mm in OD and 2.0mm-5.0mm in wall thickness, as well as corresponding square and rectangular pipe. Products: architectural structure tubes, low-pressure liquid tubes, coal transmission belt tubes, drive shaft tubes, guardrail tubes, tower footing tubes, automobile beam steel tube and other products. Equipment advantages ZTF forming process save roller up to 60% With direct square forming technology, one set of roller can produce all pipe sizes Electric control and automatic adjustment, high precision,high roller change speed
General Information: 1. Concrete Pump hoses be able to use 20,000 cubic meter compared with normal quality of 12,000-15,000 cubic meters in china; 2. Integrated hose end and inner wall hardened, prolong working life; 3. 2 plies and 4 plies of steel wire reinforcement ensure the working pressure; 4. Hose ends can be galvanized. Concrete Pump Rubber Hoses Application: 1. they are used for high-rise buildings, highway, tunnel, water conservancy project , nuclear power station and so on; 2. used for construction machinery , concrete pump delivery concrete; 3. used for the end of pump to send the concrete to exact station while cleaing can resist suction. Usually equipped with hard ground head.
lifting chain LIFTING CHAIN SERIES ODM. Lifting Chain Series, High Quality Lifting Chain Series Size(mm)Width(mm)Approx Weight (kg)Working Load (T)Test Load (KN)Breaking Load min (KN) Inside Outside 6Ã?187.5210.791.12745.2 7.1Ã?21924.51.071.53761.6 8Ã?2410281.3824880.4 9Ã?2710.830.61.752.562.5101.7 10Ã?3012.5352.23.276126 11Ã?4312.636.52.333.892154 12Ã?3615423.14.6109180.9 13Ã?3916.3463.85128212 14Ã?4218494.136.3150250 16Ã?4820565.638192322 18Ã?5423636.8510246407 20Ã?6025708.612.5300503 22Ã?652874.210.715.3366608 26Ã?78359114.8721.3510850 30Ã?903810519.628.36781130 32Ã?964010622.2932.27721286 34Ã?1263810922.736.38701450 LIFTINF CHAIN Material:high-quality alloy steel Surface treatment:self-color,polishing,black,plastic coating,hot-dip,galvanized etc. Manufacture standard:ISO.DIN.BS.JIS.ASTM Quality Grade:G80,G100 Safety factory:min 4 times More information you can view here.
We provide all kinds of thin - walled plastic products, such as fresh box, plastic cup, lunch box and so on. High quality molds not only ensure the quality of injection products, but also we provides customers with an important basis for system solutions. Mould technology has a very direct and important influence on the quality and cost benefit of the finished products. The most important thing is the rich experience of mold structure design and application.We has accumulated rich design experience and processing technology in the injection mold of skin grain, which has created unparalleled performance for the injection mold of skin grain. -Optimizing temperature control -Excellent cooling water design -Easy maintenance -The steel material is optimized for high precision machining - Long service life, durable, high performance
Multi Span Greenhouse (CMR5030) Width:6.0m-8.0m*n Length:4.0m*n, Apex Height:2.5m-4.5m Wall Height:1.8m-2.5m Cladding�Poly Film, Pipe Diameter�Φ32,�50*50*1.5 Advantage High quality steel structure and long service life, The frame works structure is assembled by prefabricated parts, All the greenhouses we designed are easy&quick to be installed and dismantled.No welding involved,all connected by clips and clamps,bolts and screw,slot and springs, The most economical greenhouse for large growers, Optional systems are available for agriculture usage greenhouse: Internal shade system or exterior shade system Cooling and heating system Irrigation system Side Ventilation and roof ventilation(with manual or automatic open-close operation control system is optional ) Hydroponic system
Multi Span Greenhouse (CMB1230) Width:9.0m,8.0m*n Length:20m-100m Apex Height:4.5m-6.0m Wall Height:2.5m-4.5m Claddingï¼?Poly Film, Pipe Diameterï32,â?¡80*60*1.5 Advantage High quality steel structure and long service life, The frame works structure is assembled by prefabricated parts, All the greenhouses we designed are easy&quick to be installed and dismantled.No welding involved,all connected by clips and clamps,bolts and screw,slot and springs, The most economical greenhouse for large growers, Optional systems are available for agriculture usage greenhouse: Internal shade system or exterior shade system Cooling and heating system Irrigation system Side Ventilation and roof ventilation(with manual or automatic open-close operation control system is optional ) Hydroponic system
