Description The chemical, electrical and thermal performance of ptfe is second to none among any other available plastics. So it is known as ¡¡ãthe king of plastic¡¡à. It is among the most widely used of all the fluoropolymers. Characteristics -non-stuck Applications Bearings Gaskets Sealing rings Wear rings Friction pads Insulators Chemical resistance linings Medical apparatus such as hoppers, beakers By plastic pallet or wooden pallet
Ptfe extruded rod: Description: 1.Ptfe rod could work in temperature of -180~260 2. Good dielectric in mediums. 3. It has not-sticky property. 4. Nice insulation property 2. Self-lubrication Specification of ptfe rod: (oem is available) Diameter(mm)Length(mm)Tolerance 51000-3000mm Properties: ItemData Apparent density2.10-2.30 g/ cm3 Tensile strengthy14 mpa Elongation at breaky140% Working temp-180~260 Melting point330 Produce max.Temp390 Compressive strength 1% deformation400-500% Hardness50-60 shored Water absorption0.01% Application: 1 chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc. 2. Machine: used in piston ring, guide ring, machine tool guideways etc. 3. Electrical and electronic engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc. 4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper. 5. Light textile and other industry: ptfe product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc. Wooden case
PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE(teflon) rod and molded PTFE(teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE rod has similar friction levels to ice. The material of PTFE can work at -180 C ~+260 C and is the best electrical insulator of all known plastics. Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on. Remarks: We can also produce PTFE(Teflon) sheet in other sizes and thickness according to customers' specific requirements.
Ptfe teflon rods Ptfe teflon rods are available from 6mm dia to 500mm dia in pure teflon and various filled grades
Ptfe rod extruder dia 80mm-150mm 1.Horizontal ram extruder for ptfe rod 2.Ram extruding machine for ptfe rod 3.Using for pre-sintering ptfe material. 4.Suit for new ptfe material or recycle ptfe material. Teflon extruding machine for ptfe rod(80-150mm) This ptfe extruder is able to extrude rod which dia from 80mm to 150mm. The automatic Production line is controlled by computer, which is really easy to operate. Meanwhile, the Plastic extrusion machine is advance designed, high output, low energy consumption, Long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Technical data Description model no. Machine model pfb-150 Plastic extruderptfe rod Power33 kw Min - max dia80-150 mm Tolerance1-2mm Lengthunlimited Production per hour8-16 kg Electricity consumption per hour2.5 kw Weight of the machine1220 kg High of the machine1680mm Floor area of the machine1.6 m2 Warrenty for parts1 year Machine gurantee period1 year Free spares1 set
Specifications of single screw plastic ptfe teflon extruded rod 1. Use virgin ptfe resin to make 2. The size is: A)od: 3mm~25mm, max length 4200mm. B)od: 25mm~150mm, max length 4200. C)od 150~500mm, 1000mm. 3. Tolerance: -0.1~+0.1mm 4. Color: natural white, red, yellow, black. 5. Surfact: smooth, no impurities, no black spot. 6. Perfect package: inside is plastic paper, outside is fumigation wooden box. 7. Delivery time is usually 10days, as can according to the fact quantity to deliver. Characteristics of single screw plastic ptfe teflon extruded rod One key important advantage of ptfe rod is its operating temperature range, it can Easily out perform other engineering plastics by being able to perform continuously At -250°c, right up to an amazing 250°c. Another important advantage of ptfe rod Is its outstanding co-efficient of friction, ptfe is in the record books as having one of The lowest friction values known to man. Ptfe also has excellent acid and chemical Resistance. Another feature of ptfe is its ability to set by or due to compression. Ptfe has excellent electrical resistance. Ptfe is also water repellent and is often used In the manufacture of modern high performing, water repellent and breathable clothing.
Specifications PTFE Rod Ram Extruder PTFE Tube Ram Extruder PTFE Mould Press Machine PTFE Flim Skiving Machine PTFE Paste Extruder For Hoses wooden box
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Wire Rod Aluminium Billets
We deals in the following products of India, China, Taiwan and Korea Origin:- Steel Tie Rod
We at BDMG, provide PTFE Teflon Tapes for electric insulation purpose or for release film. PTFE Tapes are available in any required width 6 mm to 150 mm and in any required thickness 0.003 to 0.025 inch as per the customer needs.
Diameter 5.5MM-50.0MM Coil Weight - 2 tons around SPEC - SC/SCR/SCM/HIGH CARBON
Size : 5,5 mm-25 mm production range Weight min. 2050 max 2400 kg Outside diameter 1250 mm Internal diameter 850 mm Height 1700-2200 mm
Can supply: PE Fish Net (mix Color) Bales Scrap/waste. Materials are POST INDUSTRIAL. Can load in 1x40HC container approx. 26 MT (+ 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Hindalco's copper division, Birla Copper, operates one of the largest single-location custom copper smelters in the world. The custom copper smelter at Dahej in the state of Gujarat (west coast of India) houses three copper smelters, three refineries, two rod plants, a captive power plant, a captive oxygen plant, phosphoric acid plant, di-ammonium phosphate plant, precious metal recovery plant, captive jetty and other utilities. Hindalco produces LME grade copper cathodes, continuous cast copper rods in various sizes, and precious metals like gold and silver. Hindalco is one of the major manufacturers of 19.6mm diameter copper rods, which is used for railway electrification. The co-product, sulphuric acid, is partly utilised to produce phosphoric acid and fertilisers like di-ammonium phosphate (DAP). Birla Copper's brands, Birla Copper and Birla Copper II, are recognized for their high purity and consistent quality in the domestic as well as global markets. Birla Copper is an ISO 9001, 14001, 27001, 50001 and OHSAS 18001 certified company, registered on the London Metal Exchange as Grade-A copper brand, and certified as a Star Trading House having labs for chemical, mechanical and electrical testing accredited by the National Accreditation Board for Laboratories (NABL).
Copper cathode , copper millberry scrap, copper scrap, copper ingot, copper wire rod.Exporter
300mm long rods as per standards.
Teflon rods.
Product Name : Carbon Steel Wire Rods Material : Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Wall Thickness : 0.1MM~12MM Length : in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard : JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape : Round Technique : Hot rolled Packing : Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement Ends : Plain end MOQ : 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient * Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. * Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. * Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
