Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.
Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction.
Upset Parallel Threaded Rebar Coupler 100% bar break through tensile test. Material of the rebar coupler is No.45 steel. High precision thread, full thread type, no false thread.
1. Wide range of application, no weldability requirements for rebar, suitable for �?12 ~ 50mm HRB400, HRB500 same diameter or reducing diameter steel bar connection in any direction; 2. Convenient construction, fast connection speed, and the on-site connection and assembly operations take up a short time; 3. Environmentally friendly construction, no noise and pollution on site, safe and reliable.
Rebar Cold Extrusion Technology The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.� Only 1 â?? 3 kw power of oil pump, which is not limited by power capacity, has flexible structure and suitable for operation on several machines. Advantages: No professional and experienced worker needed, able to connect changed steel bar of different diameters. Save 80% of connector steel consumption. Only needs 1 3m to stamp each connector, which is about ten times faster than ordinary welding. No flammable gases, not affected by rainy or cold weather. Relieve congestion of the connecting point, facilitated concrete pouring.
Through the headed bars of anchor plate to increase the friction between the concrete and steel, improve its ability to resist drawing, in case of steel was pulled out,instead of bent ends. It is approach greatly simplifies rebar placement and reduces congestion.
Comparison of using laps and rebar coupler: 1. Reduce or eliminate some of the costs of lap splicing by using rebar coupler. 2. The use of laps can be time-consuming in terms of desigh and installation and the increased amount of rebar creats congestion within the concrete The Characteristics of the Usage Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
Packaging Type- Customer preference Quality Available- Indian, European, Singapore Minimum Order Quantity- 1 METRIC TON Payment Term- L/C AND ADVANCE Machine Clean- SORTEX
Bubble wrap for packing fragile products . size : width 40 inches length 10 yards. 24/7 delivery service available in Karachi .
Wall mount picture frames available in all standard sizes , sizes in inches : 4x6 , 5x7 , 6x8 , 8x10 , 8x12 , 12x16 , 12x18 . Customs sizes can be made.
Thermopore Insulated box for safety of your product . Custom sizes can be made .
Shandong Micflon Technology Co.,Ltd. is a processing company specialized in production, marketing and research of high performance Fluorine materials with certification of ISO9001, ISO14001 and ISO45001. Our products range from PTFE, PFA, PCTFE to their machined parts, which can be mainly used in the field of Semiconductor, 5G, New Energy, Medical, Aviation, etc.. At present, our customers have spread to more than 30 countries and areas, including Europe, USA, Korea, Japan, Brasil and China. Since establishment of our company, we are committed to research and production of high performance of Fluorine materials, we also started our Modified PTFE compounds project from the second half year of 2022. As a quality-driven company, our independent research laboratory undergo strict testing from raw material to finished products, ensuring our stable and high-level quality standards. Micflon is your reliable fluorine material solutions partner.
THE BEST quality of Indonesian hair 100% human hair, no synthetic ,no tangle and thick
Fluoron PTFE fine powder F100 is a soft, white polymer made from an aqueous dispersion of PTFE. These fine powders have the lowest friction coefficient of all fluoropolymers and the highest heat resistance, chemical resistance, electrical properties and non-stick properties. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. Fluoron PTFE F100 is designed for machining with low compression ratios of 10:1 to 300:1. It aims to promote the production of high-quality, low-density tapes Processing suggestion PTFE F100 is extruded using liquid processing AIDS, such as naphtha. During the paste extrusion process, the powder is mixed with a lubrication agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical preformed blank. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through the finishing mold under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F100 is usually further processed under heat into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.
Spot welding machine (terminal weld ), laser weld machine, balance furnace, ultrasonic cleaning and drying machine, laser marking machine, pneumatic testing machine, air compressor, induction regulator, enemal furnace.
Multiposition premade ziplock bag packaging machines, premade bag packaging machines, mini type vertical packaging machines, vffs vertical packaging machines, flow packaging machines .
Hot press machine, veneer peeling machine, log debarker machine, cold press machine, sanding machine, veneer dryer, glue spreader, edge trimming saw.
Bblack textile fabric, kind of polyester , cotton , tc , tr items, plain dyed and print both we are also exporting embroidery items.
Stylish and functional, our jute laptop bags are perfect for stowing your laptop while adding a rustic, eco-conscious vibe to your style. The intricate embroidery offers a premium touch, blending style with sustainability. Features: + 100% biodegradable jute material, eco-friendly. + Sturdy construction, ideal for long-term use. + Spacious design for versatile storage needs. + Intricate embroidery for beauty and elegance.
Automatic argon arc welding equipment, clean pipelines, pipes, automatic welding machines, pipe flange automatic welding machines, tube plate automatic welding machine, plasma automatic welding machine, pipe cutting machine, flat mouth machine, tungsten electrode grinding machine.
