Chemical Propeties: 1.Heat and cold resistant, can work between -50C~+200C in the long run. 2.Viscosity ranging from 5-5 million cs, also insignificant temperature dependence of viscosity. 3.Excellent insulation performance, good water repellent and moisture resistant. 4.Good chemical stability, high resistance to weathering and oxidation conditions. 5.Inert, odorless, tasteless, stainless, and therefore ideal for medical and food applications. 6.Low surface tension, high flash point, low freezing point. Application: 1.Lubricant for rubber, plastic bearing, gear, also for reducing the friction 2.Release agent for plastic forming process, rubber process, metal cast, making paper, etc. 3.Material for making defoamer 4. Surface treating agent for glasses, ceramics, metals 5.Additive agent for paint, rubber, paraffin, resin, etc. 6.Medical defoamer for artificial heart-lung machine and basic pharmaceutics to treating pulmonary edema. 7.Insulating, dustproof and mildewproof coating on glassed, ceramics 8.Finishing agent for textile 9.Basic material of cosmetics, skin care products, hairdressing products 10.Softening agent, water repellent, hand modifier for textile and leather 11.Hydraulic oil, especially in aircraft 12.Material of shaving cream, toothpaste, soap powder, washing powder 13.Heat transfer fluid
At H&M we offer a high quality Silica Sand from Egypt and we have the relevant experience to supply tens of thousands metric tons of silica sand (SiO2) around the globe. Our silica sand offerings are uniform in size and shape with low Iron Oxide (FeO3) that is desirable in various industries. We ship 27 metric tons in each 20ft shipping container and we provide up-to-date chemical analysis for each of our products, and we offer samples to our partners to do their own chemical analysis if they desire. Our motto is 100% satisfaction in every deal we make, and we work diligently to maintain that. Our main silica sand (SiO2) offerings Grade 1: $24.6 per ton (SiO2: 99.87% FeO3: 0.017%) Grade 2: $23.8 per ton (SiO2: 99.66% FeO3: 0.035%
At H&M we offer a high quality Silica Sand from Egypt and we have the relevant experience to supply tens of thousands metric tons of silica sand (SiO2) around the globe. Our silica sand offerings are uniform in size and shape with low Iron Oxide (FeO3) that is desirable in various industries. We ship 27 metric tons in each 20ft shipping container. We provide up-to-date chemical analysis for each of our products, and we offer samples to our partners to do their own chemical analysis if they desire. Our motto is 100% satisfaction in every deal we make, and we work diligently to maintain that. Our main silica sand (SiO2) offerings �� Grade 1: $24.6 per ton (SiO2: 99.87% FeO3: 0.017%) ��� Grade 2: $23.8 per ton (SiO2: 99.66% FeO3: 0.035%
We deals in the following Chemicals :- Defoamer : Silicone BasedBentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite ClayQuartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica GritsMica Powder, Mica Flakes, Mica Blocks, Mica SheetsDolomite PowderBarite Powder, Barite OreHematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide )Ilmenite (Synthetic Rutile)Fly Ash PowderAlumina Silica ( Cenosphere ) PowderCalcium Carbonate PowderMagnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Ferro Silicon Ferro Silicon has a melting point of 1200°C to 1250°C with a boiling point of 2355°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores. Ferro Silicon is an atomised alloy, which is formed by combining iron and silicon with a silicon content range of 15% to 90%. Ferro Silicon is a universal “heat-blocker” used in the production of carbon and stainless steels.
SPECIFICATION: AL: 1.50% SI: 70-75% C: 0.15% P: 0.05% S: 0.05%
FerroSilicon uses coke, quartz (or silica) as raw material,and is made by electric furnace.Ferrosilicon is widely used in the steel making,iron casting ,low-carbon ferroalloy producing. Application: 1.In the steel making field,Ferrosilicon is used as deoxidizer and alloying agent to precipit and diffuse deoxidation.Adding a certain amount silicon of fe-si to the steel can obviously improve the strength ,hardness ,elasticity and permeability of steel. 2.In the iron casting,ferrosilicon is used as ball mile agent and alloying agent, especially in the nodular iron casting,Adding ferrosilicon to cast iron,it can prevent the formation of carbide and promote the precipitation of graphite and the nodulizing.then the mechanical capacity can be the same of steel's. 3.High-silicon ferrosilicon can be used for the production of the low-carbon reductant in ferro alloy industry. 4.In addition, ferrosilicon powder can be used as a suspended phase in the mineral processing industry and coatings for welding electrodes in the electrode manufactruing.
The set with oxygen reservoir bag,Silicone mask and oxygen tubing 100% medical level silucone Material,Latex free Additional accessories(PEEP Valve,B Valve ,etc.)and customized label are available All parts(excluding the oxygen tubing oxygen reservoir) are fully autoclave up to 134 Reusable for 20 times Size:Adult/Pediatric/Infant
The baking mould use food grade silicone material, non-toxic, tasteless, non-stick, leak proof, professional design and break through the ancient workmanship. There is 6 cavities, round shape. The product is used for home, restaurant, party, wedding, as a present etc. You can eat 6pcs delicious doughnuts once. The baking mould cavity quantity and product color can be customized according to customer's requirement. There is other shapes, for meeting customers' different demands. Size: 29.5*17.3*1.7(cm) Material: Full Silicone Product Net Weight: About 120g Quantity of cavity: 6pieces,it can be customized. Shape: Round Color: Brownish Red or Red, other colors can be customized. MOQ of product in stock: 100pcs, one carton MOQ of product customized: For example: color customization, MOQ is 1000pcs.
We offer Sub unsold- Silicone caoutchouc, clean natural-dull, punched foil, in octabins, suitable for colour industry, Impact modifying quantity: abt. 18 - 20 mts per loading --- today abt. 200 mts and up Price: EURO 335,--/mt cfr Asian mian port
Strong products: CaF2/BaF2/MgF2/LiF/Si crystal blanks/rods and their windows/lenses/wafer.
6N Polycrystalline Silicon
Granule 1-4mm 99.99%
Products information Silicone oil ln-201 Description Other name:polydimethylsiloxane fluid Mf:(ch3)3sio[(ch3)2sio]n-si(ch3)3 Cas no:63148-62-9 Ln-201 is a series of products with viscosity of 100~300, 000cst.Under strict production process, the quality of the ln-201 is able to reach the stand of food, cosmetics and pharmaceutical usage. It is tested which established that silicone oil is essentially non-toxic and non-irritating. Not harmful to textiles, garments and human body. Application 1.Used in skin care, bath gel, shampoo and other cosmetics. 2.Used in additives and agent in rubber, sealant, plastic, latex, etc. 3.Used as deforming agent, lubricant, release agent in pharmaceutical, food, chemical, paint and other industries. 4.Used as mold release agent 5.Used as softener, lubricants for sewing line, and other textile. Storage: Keep away from fire and direct sunlight, it has 12 months shelf life in closed containers, products beyond the shelf life can be usable.
Mould Release Agent (SS EM -) is Silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and Release properties are advantageous. Antifoam – Defoamer (SS AF -) is Antifoam Emulsion designed to provide optimum antifoam performance for general purpose and special pH conditions, combined with good dilution stability and good foam knock down performance. Methyl Hydrogen Emulsion (SS ER -) is reactive methyl hydrogen emulsion especially designed for treating variety of substrates & fibers where water repellent or hydrophobic properties required. Textile Softners ( SS SOF -) Amino Silicone Fluids Emulsions specially designed to provide excellent elastic properties, bounce, excellent softness, silky finish to variety of fabrics with durability and unique handle. Shine – Polish Agent ( SS SP -) is specially designed Shine and Polish emulsions formulations which provides high Gloss and good adhesion to variety of surfaces .The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness. Poly Urethane release Agent (SS-PU) Release Agent has been specially formulated as a semi permanent release agent in a wide range of applications, including:• Polyurethane Release: particularly polyester type, polyurethane shoe sole, Microcellular automotive parts and furniture (integral skin), Automotive parts: bumpers, crash pads, dashboards.
ARG 100 is a hydrolytically stable Silicone polyether surfactant, which can be used in wide range of applications in Paints, Agriculture, PU Foams, Textile, Petroleum Refineries, Detergents, Automotive and Household cleaning products, due to its excellent surface property (surface tension below 22 dynes/cm). SS ARG 166 is used as emulsifier in Textiles and other applications. SS ARG 110 is a Super Wetting and Spreading Agent, which have a low molecular weight nonionic silicone surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as a formulation ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals SS ARG 210 All purpose cost effective Spray Adjuvant , which on mixing with insecticides, fungicides, herbicides and other agriculture chemicals increases their penetration, spread and efficiency.