Premium fuel adhering to European standards, ensuring clean and efficient engine performance with superior combustion efficiency and reduced emissions. Delivery Terms : CIF / FOB Shipment Payment Term : MT103 TT Wire Transfer Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of seller Products Origin : KAZAKHSTAN Contract Term : 12 Months minimum after first successful trial (with rolls andextensions) PORT OF LOADING : JURONG PORT, SINGAPORE AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON PORT PORT OF DESTINATION / DISCHARGE : TBA PACKING : Bulk for Vessel Loading INSURANCE : 110% By Seller DELIVERY : : Within 2-4 Weeks, From the Date of Approval of Documents, Depending Upon Availability Of Vessel. INSPECTION : All Products Are Quality & Quantity Wise Certified By SGS. PAYMENT TERMS : To Be Discussed
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
1. BUYER issues LOI with full company KYC including: Company Details, Contact Details for Signing Authority, and Passport Facing Page.2. SELLER issues Soft/Full Corporate Offer SCO/FCO) including: Full Company Details, Contact Details for Signing Authority, Passport Facing Page, and Company Banking Details.3. BUYER accepts terms and issues Irrevocable Corporate Purchase Order (ICPO) addressed to the SELLER. ICPO MUST include SELLERâ??S procedures on BUYERâ??S official company letterhead.4. Included with ICPO, BUYERâ??S Bank issues a BCL/POF/RWA bearing the SCO REF Number: SCOKVPL0524001 a. BUYER authorizes SELLER and/or SELLERâ??S Financial Service Provider to verify BCL/POF/RWA via BUYERâ??S Bank. 5. SELLER issues PPOP upon successful verification of BUYER bank BCL/POF/RWA. Documents included in the PPOP document package are:a. SELLER Bill of Lading b. Loaded SGS Report Q&Q -(Notarized).c. Chief Officers Ullage report-(Notarized) d. SELLER Charter Party Agreement (CPA) e. Product Passport (product analysis report) -(Notarized) f. Certificate of Origin -(Notarized) g. Statement of Product Availability -(Notarized) h. Commitment and Assurance Letter to supply -(Notarized) i. Authority to sell and collect (ATSC) -(Notarized) 6. End-to-end procedure after issuing PPOP is NOT expected to exceed TEN (10) working days, including 96 hours for vessel loading laycan. 7. Included with PPOP, SELLER issues Commercial Invoice (CI), and NCNDA / IMFPA to BUYER. 8. The BUYER signs and returns the executed documents to the SELLER. If the documents are not executed in a timely fashion. The SELLER may terminate this agreement without prejudice to any rights or remedies of the SELLER. Notice will be in writing. 9. After safely receiving the PPOP and returning the executed CI and documents. The BUYER MUST issue either MT 700 DLC or MT 799 BLOCKED FUNDS to the full value of commercial invoice amount. 10. Additionally, the BUYER MUST present his vessel for loading in the nominated port and be ready within 24 Hrs to load the full cargo. When requesting the UDTA to be issued, BUYER MUST provide the following details to the SELLER: a. VESSEL NAME b. VESSEL Q88 c. Vessel Agent full contact details 11. After fund instruments and vessel nomination details are received. The SELLER will issue Unconditional Dip Test Authority (UDTA) to the BUYER. SELLERâ??S agent will contact the BUYERâ??S agent and program the vessel for ShipTo-Ship (STS) loading within 24 hours. 12. BUYER loading LAYCAN will commence 24hrs after the UDTA is issued to the BUYER. BUYER has 96 hours Laycan to finish loading the vessel. CIN: U74999DL2016PTC298417 13. BUYER Dips Tanks prior to vessel berthing. BUYER obtains fresh SGS Quantity and Quality report. 14. After successful Dip Test and Q&Q report. BUYER instructs account manager to make full payment of the full value of commercial invoice via SWIFT MT103 to SELLERâ??S nominated accounts.
Product Description - Used globally as a refined diesel oil, having very low sulphur content. Price of product is offered on CIF MED Prices, with deliveries to European ports, buyer's LOI is required, 100% genuine supply from UAE. All fuel offers that we sell are 100% genuine offers, only send us enquiries from 100% genuine buyers who can provide an LOI, and if NO LOI can be sent/available, please do not contact us! As we are only interested in talking to real genuine buyers who are Ready Willing and Able to proceed, who want to secure real product from a genuine seller at real market discounted prices! Product origin - UAE fuel Non - Sanctioned Fuels. Key Specifications/Special Features - Ultra Low Sulphur Diesel 10 ppm & 50 ppm Minimum Order Size and Packaging details - First initial trial shipment of 50,000 MT, 12 month contract, after 1st successful shipment, 200,000 MT to 300,000 MT per month is possible negotiated directly between buyer and seller. SORRY, NO SPOT CONTRACTS ARE ACCEPTED.
- Commodity: Diesel Fuel EN590 (10PPM), JET FUEL A1 - Origin: Kazakhstan I let the buyer deal directly with Refinery (Seller). Buyers can trade with FOB TTT Rotterdam, FOB TTT Houston, and Refinery, which can trade CIF. Please contact me only if you are interested in real buyers.
EN590 10 ppm diesel available FOB Singapore & Fujairah, Transaction terms are Tank To Tank, Tank To Vessel or Vessel To Vessel, very competitive prices.
Available products: D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2 Automotive, -EN590 10 PPM, -Diesel D6, -Diesel 10PPM & 50 PPM. -Mazut M100 -Bitumen -Crude Oil -Copper
Jet a1, en590 diesel, crude oil .Connect buyers and sellers
Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!
Product Description - Is one of a number of different grades of diesel oil Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers. Product origin - Middle East and USA Key Specifications/Special Features - D2 Diesel Gas Oil is used in most types of diesel powered engines Minimum Order Size and Packaging details - "First initial trial shipment of 10,000 MT, followed by a 12 month contract, with monthly shipments between 25,000 to 100,000 MT per month. NO SPOT CONTRACTS ARE ACCEPTED "
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6 We have the below available products ready for supply. Contact us for immidate transaction 1) D2- Gas Oil (Diesel) Lo.2-62 Gost 305-82 , Quantity- 50,000mt - 500,000mt For Cif And Fob, Spot And Contract Basis. 2) Jp54 Aviation Kerosine Colonial Grade 54 Russia Origin, Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 3) Aviation Turbine Fuel Jet A-1 Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 4) Bitumen Quantity - 50,000mt - 500,000mt, Cif And Fob, Spot And Contract Basis. 5) M100 Mazut 100 Gost 10585-99 And 10585-75, Quantity- 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 6) Liquid Petroleum Gas.Gost 20448-90, Quantity 50,000mt- 500,000mt, Cif And Fob, Spot And Contract Basis. 7) Liquified Natural Gas, Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 8) Russia Sn 150 Base Oil, Quantity - 5,000mt - 50,000mt, For Cif And Fob, Spot And Contract Basis. 9) Russia Sn 500 Base Oil, Quantity - 5,000mt - 50,000mt, For Cif And Fob, Spot And Contract Basis. 10) En590 Biodiesel, Quantity 50,000mt- 500,000mt, For Cif And Fob, Spot And Contract Basis. 11) Automotive Gas And Oil (Ago), Quantity 50,000mt - 500,000mt, For Cif And Fob, Spot And Contract Basis.
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
EN590 Diesel is an ultra-low sulfur diesel fuel designed for modern diesel engines. It offers: Minimal sulfur content for reduced emissions. High cetane number for efficient combustion. Enhanced lubricity for engine protection. Cold weather performance. Compatibility with emission control systems. Excellent storage stability. This clean-burning fuel promotes environmental responsibility and optimal engine performance.
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
CIF EN-590 10ppm Diesel -12 Month Contract Production Procedures: Please Note: I'm direct to the seller of a billion dollar global trading company who specializes in gas and grains trading. We have impeccable due diligence and a successful 40 year track record. (We have our own refinery in Kazakhstan) Product: EN590 Diesel 10ppm Origin: Kazakhstan - (Our own refinery) Delivery: CIF to any safe world port MOQ: 25mt Quantity & Fixed Pricing: 25mt= $640 50mt= $635 100mt=$630 Commission: $5 per MT starts with you. (sell side closed) CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer's review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller's Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellerâ??s approval. 6. Buyer's Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller's bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer's bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer's Bank releases the Total Value of the Shipping to Seller's Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller. 3) No brokers please. Only direct buyers or direct buyer reps.
Product Specification : Aspect Visual inspection : Clear Color ASTM D 1500 : 2.0 Max Density 15 degree EN ISO 3675:98 EN ISO 12185:96 C1:2001 kg/m3 : 845.0 Max Flash point EN ISO 2719:2002 Degree C : 55-66 Min Distillation : Recovered 150 C % Vol : 2.0 Max. Distillation : Recovered 250 C % Vol : 65.0 Max Distillation : Recovered 350 C % Vol : 85.0 Min Distillation : Recovered 95% C % Vol : 360.0 Max C.F.P.P ( Summer) EN 116:1997 : -2 Degree C Max C.F.P.P. (Winter) EN 116 : 1997 : -12 Degree C Max Cetane number EN ISO 5166 : 1998 : 51.0 Min Cetane index EN ISO 4264 : 1996 : 46.0 Min Viscosity 40 Degree C mm2/s : 2.0Min - 4.50 Max Water content mg/kg 200 Max Sulfur content mg/kg : 10.0 Max Carbon resudue % weight : 0.15 Max Ash content % weight : 0.01 Max Biodiesel content %vol : 4.5 Min - 7.0 Max Min: 50,000MT Max: 300,000MT Quantity: 50,000 MT per Monthly x 12 months Payment : DLC MT700 within 7 banking days and 2%PB Origin: Russian / Non-Russian CIF Price: $385/MT Commission: $5.00 buyer side / MT Issue Price Jan 01, 2024 Expire date: Aug 31, 2024
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.