Vrla Battery Suppliers and Manufacturers

Model 4L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 495(364)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.9 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 102 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536

Model 4L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 450(331)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.3 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 88 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536

Model L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 400(294)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.85 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 77 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345

Model L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 360(265)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 67 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345

Model MD196TI Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 320(235)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 16.5 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 61 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model TK450 (TaePyongYang) Gear ratio 1.97 2.53 3.04 3.42 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,397 x 933 x 1,077 with M. gear mm 1,695 x 933 x 1,155 Engine dry weight without M/G kg 1,009 with M. gear kg 1,329

Model L086TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 315(232)/2300 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.66 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 62 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A (Dong-I) Gear ratio 1.77 2.09 2.42 2.82 3.19 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,364 x 919 x 965 with M. gear mm 1,552 x 919 x 1,062 Engine dry weight without M/G kg 790 with M. gear kg 1,015

Model L136TI Engine type 4 cycle In line direct injection water cooled with turbo charger inter cooler Rating output BHP PSkWrpm 2301692200 Displacement cc 8071 Cylinder number bore x stroke mm 6 111x 139 Mean piston speed msec 1019 Compression ratio 167 1 Firing order 1 5 3 6 2 4 Governor type of injection pump Mechanical all speed RSV Fuel consumption lit h 45 Starting system Electric Starting by starter motor Starter motor capacity V kW 24 45 Alternator capacity V A 24 50 Battery V Ah 24 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max Min lit 27 25 Fresh water pump type Centrifugal type driven by V belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A DongI Gear ratio 177 209 242 282 319 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size L x W x H without MG mm 1364 x 911 x 937 with M gear mm 1552 x 911 x 1027 Engine dry weight without MG kg 773 with M gear kg 994

Model L136T Engine type 4 cycle, In line, direct- injection, water cooled, with turbo charger Rating output (B.H.P) PS(kW)/rpm 200(147)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 37 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90A (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,351 x 893 x 937 with M. gear mm 1,351 x 893 x 937 Engine dry weight without M/G kg 748 with M. gear kg 938

Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928

CNDIP is your trusted partner in supplying highest quality ,best price for diesel engine spare parts. With thousands of parts in stock, we have what you are looking for Material Type: High-speed Steel Our AdvantagesaThis sliding designed Weatherproof Batten� is easy for installation, and this Weatherproof LED Batten Fixture adopts stainless steel base, so that the intensity of this led linear luminaire can achieve IK10. This Emergency Weatherproof LED Battens has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this emergency waterproof luminaires can achieve 125lm/w. The safety hooks design of this Emergency LED Batten Fixture is more convenient and safe for installation. The clip-fixed backup battery design of this emergency weatherproof LED battens makes the maintenance and replacement more easier. And the emergencny function enable the Emergency LED Batten Light to operate continuously for more than 3 hours in emergency situations. It's very practical. Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-NSBLP60-5FT-CE Color Temperature(CCT): 6000K Input Voltage(V): AC 220V( ± 10%) Color Rendering Index(Ra): 82 Support Dimmer: No Lifespan (hours): 50000 Working Time (hours): 50000 Length: 5ft Beam angle: 120 Degree 1. High quality,Best price. 2. Timely delivery; Within 7 days after confirmation. 3. Stable performance, Safety and stability,Long-standing durability. welcome to inquiry!

DCM3366D series electronic DC energy meter is a new generation product produced by our company. It adopts a liquid crystal display and has an RS485 communication function for data exchange with a microcomputer. It is suitable for power measurement and energy metering of DC signal equipment such as batteries and solar panels. It can also be used in modern supply and distribution DC systems such as industrial and mining enterprises, civil buildings, and building automation. It is composed of a measurement unit, data processing unit, communication unit, display unit, etc., and has the functions of electric energy measurement, data processing, real-time monitoring, and LCD. The electric energy meter has the characteristics of high overload, high accuracy, low power consumption, automatic saving of power outage data, and long life. Rated voltage (Un): DC100V, DC300V, DC500V, DC1000V Rated current (Ib): 50A, 100A, 200A, 300A, 500A, etc. can be set (maximum measured value 4800.0000A), using an external 75mV shunt input Auxiliary power supply: power supply voltage, DC20Vï½?60V or AC85ï½?265V/DC85ï½?330V optional Working temperature range: -25â??ï½?60â?? Dielectric strength: Voltage/power supply/casing: 3.0kV/min Communication/power supply: 3.0kV/min Static electricity immunity: contact discharge 8 kV, gas discharge 15 kV Electrical fast burst immunity: 4kV Surge immunity: 2kV/4kV

4FT Tri-proof linkable Batten Fixture with emergency function The emergency tri-proof luminaires adopt LED chips SMD2835, so the Waterproof Batten Fixture can achieve 130lm/w high lumen out put. This Waterproof Batten Fixture has emergency function, able to ensure lighting for more than 3 hours in the event of a power outage. The emergency battery of this tri-proof emergency luminaire has a special clip-fixed housing, it's easy for maintenance and replacement. The protection rating of this led tri-proof luminaire is high up to IP65, has a high dustproof and waterproof performance. Besides, the huge terminal block design of the orrosion-resistant Batten Fixture is easy for wiring. Lamp Luminous Efficiency(lm/w):125 Warranty(Year): 3-Year Type: LED triproof light Application: Office, Warehouse, Garage, Factory Other attributes Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-EWPLP40-4FT Color Temperature(CCT): 6000K (Daylight) Input Voltage(V): AC 110 or 230V( �¯ 10%) Color Rendering Index(Ra): 82 Support Dimmer: NO Lifespan (hours): 50000 Working Time (hours): 50000 Product Weight(kg): 2.4 Length: 4ft IP Rate: IP 65 Beam angle: 120 Degree Material: PC + PC

AVITA Magus 12.2" 2-in-1 Touch Screen Notebook/Laptop Detachable Keyboard (N4020/4/64GB eMMC/W10H) 2-in-1 detachable design MAGUS is both a recreational gadget and the best partner in the office. The 2-in-1 comes vivid color line-up with a 12.2â?? 1920x1200 IPS touch screen that offers ultra-wide viewing angle. With a keyboard cover, the MAGUS 12.2" 2-in-1 transforms from a tablet into a laptop by simply opening the built-in stand, enabling users to stay productive with ease anytime, anywhere. Inside-out Vibrancy MAGUS combines minimalistic design with a metallic casing. Be it in tablet form or laptop mode. Accommodate daily work and entertainment needs MAGUS can run a variety of Windows applications with battery life up to eight hours. It has a microSDXC card reader built in, equipped with a 3.5mm audio jack, HDMI port and a USB 3.0 interface, taking care of the users' needs in every way possible. Brand Series: Avita Magus Part: NS12T5MYC42B Processor: Intel Celeron N4020 Memory: 4GB LP DDR4 2400 MHZ Storage: 64GB eMMC Operating System: Win Home 10 Graphic: Intel UHD 600 Graphic Display: 12.2" FHD TFT 1920* 1200 IPS. Capacitive Touch Panel. (P+G). Video Output 1080P Camera: 2.0MP (Front Only. No rear camera) Wifi/Bluetooth: Yes/4.0 I/O Ports: 1 x USB 3.0 Type A HDMI: 1 x Full Size Card Slot: 1 x micro SD (max 256GB) Headphone: 1 x 3.5mm Finger Print: No Keyboard: Detachable Ethernet Jack: No Dimension (mm): 299(W) x 206(H) x 22(D) Weight (kgs): 1.396 (keyboard weight 0.3535kgs) Warranty: 12 Months (Local)

BENEFITS 1. Smart and Portable The size of the horizontal rod is about 300mm, and the vertical rod is about 250mm. The ruler body is smart and portable. 2. LCD Digital display, easy to read. 3. High Accuracy The measurement accuracy can reaches 0.01mm.The measurement results can be display instantly 4. Multifuncional, Wide range of application . It can measure five items to meet different requirements: 1) The descent height value of the switch rail 2) The descent height value of the point rail 3) The height of check rail 4) The height of switch roller 5. This device is equipped with a simple calibrator ,could be used for quick calibration before each use 6. The measure head could be moved from side to side,suitable for all kinds distance tracks. Measure head could move range is 60mm,could be used for measuring different distance switch rail and point rail. 7. Replaceable measuring probe, suitable for different usage When measuring the height of the switch rail and point rail relative running rail, using the flat measuring probe; When measuring the rail surface dent, using the sharp measuring probe. 8. Metric /Imperial unit Specification Model LJ-JGJD-I Type Switch Rail Gauge Material Stainless Steel Dimensions (L x W x H) (mm) 270*22*180mm Measure range -5~30mm Accuracy 0.05mm Resolution 0.01mm Working humidity 93%RH Size 270*22*180mm Weight 0.45kg Power Button battery(1.5V)

Product Description Product Info for Swarovski 20-60x80 STR 80 Spotting Scope (Straight Viewing, MRAD Reticle) Swarovski's 20-60x80 STR 80 Spotting Scope combines a powerful and versatile zoom capability with an illuminated reticle to give you an ideal spotter for use at the range or on the trail to estimate distances or the size of objects. With an 80mm objective lens and multiple lens coatings, the scope produces images that are bright, clear, and distortion-free across the entire field of view with faithful color fidelity even in low-light conditions. The Porro prism design provides an enhanced depth of view that offers the user an immersive visual experience. To expand the usability of the STR 80 is an illuminated ranging reticle. This duplex reticle has stadia markings set at 0.10th MRAD on the horizontal and vertical axes, with additional ranging markings on the lower left and right quadrants. The reticle is set on the front focal plane, so no matter what magnification the scope is set at, the ranging markings are accurate. There are 15 brightness settings for use at night or in full daylight. If the reticle is not needed, it can be turned off to completely remove it from sight. Swarovski STR 80 Specs Design Viewing Angle Straight Performance Magnification 20 to 60x Objective Lens Diameter 80 mm Angle of View 20x: 65�° (Apparent) 60x: 40�° (Apparent) Field of View 20x: 108.0' @ 1000 yd / 36.0 m @ 1000 m 60x: 60.0' @ 1000 yd / 20.0 m @ 1000 m Minimum Focus Distance 19.0' / 5.8 m Exit Pupil Diameter 20x: 4 mm 60x: 1.3 mm Eye Relief 17.0 mm Features Reticle MRAD Illuminated Crosshair Fogproof Yes, Nitrogen Filled Water Resistance Waterproof General Battery / Runtime 1 x CR123 / Up to 1300 Hours Filter Thread M82 x 0.75 Tripod Mounting Thread 1/4"-20, 3/8"-16 Operating Temperature -40 to 131F / -40 to 55C Storage Temperature -40 to 158F / -40 to 70C Dimensions L: 13.2" / L: 33.5 cm (Without Eyepiece) Weight 3.8 lb / 1.7 kg

Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation(cant), check rail gauge and back to back distance measurement.Ican be used for track inspection and fine adjustment of rail gauge.This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying. FEATURE 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. Bluetooth connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) SPECIFICATION Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4Vï½?5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30 +55 Insulation performance 1M Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error â?¤�±0.25mm Superelevation max indication error â?¤�±0.3mm Length 1700mm Net Weight Net Weight

Product Description MOTOR SyncDrive Core, 50Nm, Powered by Yamaha CONTROLLER RideControl Dash, full color LCD screen DISPLAY RideControl Dash, full color LCD screen BATTERY EnergyPak 400Wh FRAME ALUXX Aluminum, Overdrive 1�½ - 1â??" head tube, integrated KS18 kickstand mount FORK SR Suntour XCM ATB Coil 29" 100mm travel, Tapered 1�½ - 1â??" steerer SHOCK - HANDLEBAR Giant Connect TR Riser 31.8x690~750mm GRIPS Giant Sole-O Grip STEM Giant Contact SEATPOST Giant 30.9mm, 2-bolt Micro Adjustable, Forged Aluminium SADDLE Giant Sport PEDALS Aluminum Platform SHIFTERS Shimano Altus FRONT DERAILLEUR - REAR DERAILLEUR Shimano Alivio, 9-speed BRAKES Tektro HD-M275, hydraulic disc, 160/180mm BRAKE LEVERS Tektro HD-M275 CASSETTE Shimano CS-HG200, 11-36T, 9-speed CHAIN KMC e.9 Sport, e-bike optimized CRANKSET FSA Comet E-Bike crank arm set FSA MegaTooth Direct-mount 1X steel 36T BOTTOM BRACKET N/A RIMS Giant GX03V HUBS Giant eTracker Sport, [F] 9mm QR [R] 135mm QR SPOKES Stainless steel TIRES Maxxis Rekon 29x2.4" Wire Bead 60TPI LIGHTING - CARRIER -

Product Description FRAME Timemachine 01 Disc Premium Carbon with Vmax Aero Design and P2P Positioning SyStem Internal Di2 Battery Mount PF86 Bottom Bracket Rear Storage Box Aero Caliper Cover Sliding Dropouts Flat Mount Disc 12x142mm Thru-Axle FORK Timemachine 01 Disc Premium Carbon with Vmax Aero Design, Hinge Design Aero Caliper Cover Flat Mount Disc 12x100mm Thru-Axle GEARS 2x12 CHAINWHEEL SRAM FORCE AXS 48-35T CASSETTE SRAM FORCE XG-1270 10-28T CHAIN SRAM FORCE 12 Speed FRONT DERAILLEUR SRAM FORCE eTap AXS REAR DERAILLEUR SRAM FORCE eTap AXS SHIFTERS SRAM eTap AXS BRAKES SRAM S-900 Aero HRD Disc Brake, Centerline XR Rotors (160/160) HANDLEBAR BMC Flat Cockpit / Profile T4+ Carbon Extensions STEM BMC Flat Cockpit SEATPOST Timemachine 01 Premium Carbon V-Max Aero Seatpost â?¢ 62mm Offset Adjustment â?¢ P2P Dual-Mount Aeropost Configuration (Triathlon & Time Trial) SADDLE Fizik Mistica Mg HUBS DT Swiss ARC 1650 Disc RIMS DT Swiss ARC 1650 Carbon Disc, 62mm TIRES Pirelli P ZERO RACE TIRE CLEARANCE 27mm (Measured Width)

Features: 1) Beautiful The remote control robot chassis is beautiful in appearance. The fuselage is large, and the space reserved for development is sufficient. 2) Strong The bottom of the fuselage is reinforced to carry heavy loads. The installation position of the travel motor has also been reinforced to prevent deformation and displacement. The tires are lawn tires with a width of 15cm, which are beautiful, durable, large in width and strong in support. 3) Mature technology This product is modified on the basis of our very mature remote control lawn mower, an economical chassis product. It adopts the mature walking motor controller on our remote control lawn mower, which has the characteristics of sensitive response and fast response speed. The built-in smart chip can intelligently detect the current and heating conditions, which can ensure stable use all year round. And it has a slow start function, the operation is smooth, and there will be no frustration when accelerating or decelerating suddenly. 4) Scalability Equipped with a function expansion HUB, which can control additional 4 channels, it can easily control and expand other functions required by customers without professional remote control knowledge. On the basis of our chassis, you can freely add other functional modules to create a new vehicle that meets your own needs. Specification: Walking Speed: 0-6km/h Working Temperature: -20~55�° Remote Control Range: 200m Walking Motor Motor Type: Brush electric traction Voltage / Power: 24V / 350W Reduction Ratioï¼?23.2:1 Rotating Speed: 75RPM Rated/Max Output Torque: 18.4/55Nm Wheel: 15X6.00-6 vacuum tire Battery: 24V 20Ah Remote Control Channel: 7 Extended Controllable Channel: 4 Payload: 50~300kg Wheelbase: 810mm Track: 890mm Overlay Panel: 990*625mm Machine Size: 1070*1035*430mm Machine Weight: 98kg Package Size: 1150*1120*600mm Gross Weight: 130kg

Features: 1) Integrated walking system The brushless motor and gearbox are integrated, with a high transmission efficiency of up to 73% and low energy consumption. The gear reduction ratio is high, and the worm gear system provides durability and longevity. 2) Low maintenance Minimal professional maintenance is required due to the high quality of the integrated motor & gearbox. 3) Servo control The dual-channel servo motor controller ensures excellent synchronization, enabling straight-line movement. 4) Security The self propelled remote control lawn mowers avoid putting staff in unsafe situations to mow, and away from snakes, spiders, insects, etc. 5) Wide range of applications It is widely used in villa lawns, football fields, mountain slopes, communities, greenhouses orchards and gardens. Specification: Model: VTLM600 Cutting Width: 600mm Walking Speed: 0-4km/h Working Degree: 0-45�° Adjustable Cutting Height: 10~150mm Remote Control Range: 200m Engine Fuel Type: Gasoline Brand: Loncin Power / Emission: 9Hp / 224cc Engine Type: Single cylinder, four stroke Start Method: Electric start Emission Standard: Euro5/EPA Fuel Tank: 2L Working Time: 2h Walking Motor Motor Type: Brushless electric traction Voltage / Power: 24V / 500W Dynamo: 28V 1500W Battery: 24V 20Ah Machine Size: 1170*1020*570mm Machine Weight: 170kg Package Size: 1280*1130*720mm Gross Weight: 200kg