Biodiesel | Scope Oils, Cooking, Vegetable, Recycled ITEMSTANDARD Free fatty acids 3 % Max M.I.U(Moisture and Impurities)0.1 % max Saponification value: 18185-1955-195 Iodine value 120 Titre C (melting point)13.75 'C Specific Gravity 25'C0.915 Density (kg/m3)920 Flashpoint by P.-M. (Degree C)220 Calorific Value (kj/kg)36,000 Kinematic Viscosity (40 deg.C)(mm2/s) Carbon Residue (mass-%)0.4 Sulphur Content (mg/kg)18 Contamination (mg/kg)24 Acid Value (mg KOH)/g)7.0 Oxidation Stability (110 deg.C)(h)5.0 (min) Phosphorus Content (mg/kg)15 Ash Content (mass %)0.01
Used Engine Oil
We supply 100% used engine oil /Used Engine Oil/Waste Engine Oil/UEO from vehicles, which are of higher quality and quantities at very good competitive prices, and we have the ability to supply up to 2500 MT per month, as we try to keep the quality at the highest in its grade. Water : +/- 2% Gross calorific Value : Min 10 000 Kcal Sulfur content : Max 0. Packaging & Delivery Packaging Details: DRUMS or as per buyer's request Delivery Detail: prompt delivery once order is confirmed
Used Oil Biodiesel Grade at very competitive rates.
Hello, We are a trading company based in Germany specializing in the trade/brokerage of used cooking oil. We offer UCO with following specifications: 1) UCO CIF 840$/MT Free fatty acids: 2% Moisture/Impurities: 0.02% Saponification value: 186 Iodine value: 120 Titre c (melting point): 13.75â?? c TFM: 95% Specific gravity @ 25â??c: 0.915 Density (kg/m3): 920 Flashpoint by p.-m. (degree c): 220 Calorific value (kj/kg): 36,000 Kinematic viscosity: (40 deg.c) (mm2/s) Carbon residue (mass-%): 0.4 Iodine number (g/100g): 110 Sulphur content (mg/kg): 18 Acid value (mg koh)/g): 2.0 Oxidation stability (110 deg.c) (h): 5.0 (min) Phosphorus content (mg/kg): 15 Ash content (mass%): 0.01 Water content (mass%): 0.075 Packing: IBC containers Origin Tanzania/Angola ISCC-certifcation: No Payment terms LC or T/T.
Specification: Ash Content (mass %) 0.01 Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 C Specific Gravity a 25 C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36,000
Specification: Ash Content (mass %) 0.01 Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 C Specific Gravity a 25 C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36,000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 18 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15
Used cooking oil, also known as waste cooking oil (UCO), refers to cooking oils and fats that have been utilized for frying or cooking in food preparation and have subsequently become unsuitable for further culinary use. It is often collected from households, restaurants, and food processing establishments as a byproduct of cooking processes. Recycling used cooking oil is an environmentally responsible practice, as it can be processed into biodiesel or used as an ingredient in animal feed, industrial applications, and even the production of soap and other products. Proper disposal and recycling of used cooking oil are important for reducing environmental pollution and promoting sustainability.
Technical specifications: 1) Free fatty acid: 1-3% 2) Free fatty acid: 3-5% 3) Free fatty acid: 5-10% 4) Free fatty acid: 10-20%
USED ENGINE OIL SPECIFICATIONS Test Units Methods Result Density @ 15 �°C ASTM-D4052 0.88 Colour Max ASTM-D1500 6 Flash Point PMCC Min �°C ASTM-D93 70-80 Pour Point - Max �°C ASTM-D97 -7 Viscosity @ 50 �°C Cst ASTM-D445 60 Sulfur Content - Max WT% ASTM-D4294 below 0.5% Water WT % ASTM-D482 3% Appearance - Visual Black Sediment Below 0.5%
Used Engines HS Code 840820 PRICE = US$1,800/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine. SPECIFICATION General Engine Specifications Basic Engine Specifications I-6, 4-Stroke-Cycle-Diesel Displacement .......................................................................... 12.88 L (in3) Rated engine speed .................................................................... 2300 rpm High idle speed ........................................................................... 2530 rpm Low idle speed (programmable) ................................................... 550 rpm Peak torque ......................................................... 3,355 N m @ 1200 rpm Bore ....................................................................................... 135 mm (in) Stroke ...................................................................................... 150 mm (in) Aspiration .................................. Supercharged-Turbocharged-Aftercooled Governor ............................................................................................. ECU Fuel system type .................................................................. Common Rail Length ........................................................................... 1960 mm (77.1 in) Length to flywheel housing ........................................... 1476 mm (58.1 in) Width ............................................................................. 1195 mm (47.0 in) Height ............................................................................ 1117 mm (43.9 in) Weight, net dry (approx.) ................................................1672 kg (3686 lb) Rotation (from flywheel end) .......................................... Counterclockwise Flywheel housing/flywheel .................................................... SAE No. 01M Flywheel teeth ....................................................................................... 155 Tolerances Power ............................................................................................... +/- 3% Exhaust Stack Temperature ............................................................ +/- 8% Inlet Air Flow .................................................................................... +/- 5% Intake Manifold Pressure ............................................................... +/- 10% Exhaust Flow ................................................................................... +/- 6% Specific Fuel Consumption .............................................................. +/- 3% Heat Rejection ................................
TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc. DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc. HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc. MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc. NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc. SUBARU: EJ20 2000cc AT etc. SUZUKI: M13A 1300cc AT etc. TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc. TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI TOYOTA LITEACE : 7KE 1800CC TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI : 2NZFE 1300CC 16VALVE DOHC EFI TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI TOYOTA CORONA : 2YPU 1800CC
TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc. DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc. HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc. MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc. NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc. SUBARU: EJ20 2000cc AT etc. SUZUKI: M13A 1300cc AT etc. TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc. TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI TOYOTA LITEACE : 7KE 1800CC TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI : 2NZFE 1300CC 16VALVE DOHC EFI TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI TOYOTA CORONA : 2YPU 1800CC
Used Engines
The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features: Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1. Power Output: 147 kW (200 hp)1. Cooling System: Freshwater cooled exhaust manifold and oil cooler1. Alternator: 14 V/50 A1. Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger
USED COOKING OIL SPECIFICATION Free fatty acids 3 Max MIUMoisture and Impurities 01 max Saponification value 181851955195 Iodine value 120 Titre C melting point 1375 C Specific Gravity 25C 0915 Density kgm3 920 Flashpoint by PM Degree C 220 Calorific Value kjkg 36 000 Kinematic Viscosity 40 degC mm2s Carbon Residue mass 04 Sulphur Content mgkg 16 Contamination mgkg 24 Acid Value mg KOHg 70 Oxidation Stability 110 degCh 50 min Phosphorus Content mgkg 15 Ash Content mass 001
Product Name: Used Cooking Oil Quality: Top Quality Delivery Time: 5-7 Days Packaging: Custom Customization Orders: Accepted We Are The Wholesale Supplier and Exporter Of *Used Cooking Oil*. Bulk Stock Available for Worldwide Delivery Contact Us For More Information.
We are the company which is looking for used car engines buy on 40ft container basis from Turkey. Please quote for the following wholesale product requirement Here are the engine brands I searched for ; Volkswagen, Toyota, Opel, Audi, Bmw, Mercedes, Citroen, Peugeot, Hyundai, Honda. etc. So engine must be full with charge, starter, injector, turbo and gearbox. The container take about 140-135 engines. Price must be wholesale. if you have list which keep by you, you can send me to pick from there too
Price - US $ 200.00 Per Metric Ton CIF Payment terms: 100% L/C Preferred. If you want start with a 1st order TT Payment See the details below. : Normal my minimum quantity: 200MT CIF Any port. See the below. 5% security advance payment start with processing & the rest of the deposit (95%), to make goods available and to facilitate packaging, all the documents ready. TT or L/C pay at the sights after the 3rd party inspection reports and loading reports is done & completed. 2nd order & up 100% L/C. Quantity less than 200MT The payment Term: 20% security advance payment start with processing & the rest of the deposit (80%), to make goods available and to facilitate packaging, all the documents ready. TT or L/C pay at the sights after the 3rd party inspection reports and loading reports is done & completed. 2nd order & up 100% L/C.
We Supply Used cooking oil for Bio diesel and others as below : USED COOKING OIL SPECIFICATION Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25 C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36, 000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 16 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01 Packaging & delivery TRANSPERENT PET BOTTLES * 1L, 3 L,5 Liters and in bulk PET Transparent Bottle (With Handle). JERRYCANS * 5 L, 10 L, 20 L, 25 L and 220 Liters Jerry can. METAL TIN * 16 L, 14 kg (with or without carton), 15 L / 15 kg, 16 kg (with or without carton 17 L / 17 kg, 18 L / 18 kg, 20L Metal Tin with Bung Hole (Round or Square) and 211 Liters Metal Drum. FLEXI TANK 20 MT Flexi Tank.
