We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Ferrosilicon� is an alloy of iron and silicon that is made by reducing silica in the presence of iron, and which plays an essential role in steelmaking.
Silicon iron, also known as ferrosilicon, is a ferroalloy composed of iron and silicon, with a silicon content ranging from 15% to 90%. It is commonly used as a deoxidizer in steelmaking and as a reducing agent in ferroalloy production and the chemical industry. In the steelmaking industry, approximately 3-5 kg of 75% ferrosilicon is consumed to produce one ton of steel. Ferrosilicon can also be used as an alloying element additive, which is widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel, and electrical silicon steel.
Ferrosilicon is also used in the production of cast iron, as it helps to control the initial content of silicon in the melt, which is important for the microstructure and properties of the final product. Ferrosilicon cast magnesium is an alloy that contains magnesium and is used as a nodulizer in the production of ductile iron. It has a big mechanical strength, and the effect of deoxidization and desulfurization is strong. Modifiers are added to molten metal to change its properties, and ferrosilicon is one of the most commonly used modifiers in the production of cast iron. The material forming the base Ferrosilicon analysis ferrosilico cast magnesium and modifiers.
The role of Ferrosilicon in Steelmaking:
In steelmaking, Ferrosilicon is used for:
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe
Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps.
Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
Silicon dioxide, often referred to as silica, is a naturally occurring compound composed of silicon and oxygen atoms (SiO2). It is one of the most abundant minerals on Earth and exists in various forms, including quartz, sand, and glass. Silicon dioxide is a versatile material with applications spanning multiple industries. In the electronics industry, it is used as an insulator and substrate in semiconductor devices. In construction, it is a key component in concrete and building materials. It is also employed in the production of glass, ceramics, and abrasives. Additionally, silicon dioxide has applications in the food and pharmaceutical industries as an anti-caking agent and flow aid. Its wide availability and diverse properties make silicon dioxide an indispensable material in numerous industrial and consumer applications.
Silicone rubber surfactant (Organic silicone surface additive) Application:
It can be used as a spray modifier, foliar absorption aids, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Silicone surfactant ZINCA-2000 is lower phytotoxicity and environmental hazards than the normal fatty amines, ethoxylated alcohol surfactant, and greatly reduce human and environmental impact.
Beverages
Cosmetics & Pharmaceuticals
Food
Industrial & General
Potential Functions:
Anti Caking Agent
Colourant
Defoamer
Potential Applications:
Cleaning Chemicals Non-Alcoholic Drinks Skin Care
Dairy Personal Care Snack Foods
Health Care Ready Meals Water Treatment
Paints Seasonings
MATERIAL : PET Airbag scrap with silicon
CATEGORY : PET
TYPE : Airbag
SPECIFICATION : 2 full container available
Origin : Tunisia
LOADING WEIGHT : 19 Ton
FOB (USD/Ton) : 450$ - 550$
Packaging : Jumbo Bag
Est. Shipping Time 15, 30, 45 days
Appearance
White or Light Yellow Emulsion
pH
6.5-8.5
Emulsion Lonic
Weak Anionic
Appropriate Thinner
10-30 â?? Water Thickening
Standard
GB/T 26527-2011
Organic Silicon Defoamer
1. The defoamer is composed of polysiloxane, modified polysiloxane, silicone resin, white carbon black, dispersing agent and stabilizer, etc.
2. At low concentrations, it can maintain good elimination bubble suppression effect.
3. Foam suppression performance is prominent
4. Easily dispersed in water
5. The compatibility of low and foaming medium
6. To prevent the growth of microorganisms
Advantage
It is composed of dispersant and stabilizer, low dosage, good acid and alkali resistance, stable chemical properties, easy to disperse in water, effectively prevent bacterial growth. The properties are stable during storage.
Application
1. Papermaking chemical pulping high temperature vacuum or pressure in the defoaming in pulp washing machine
2. When the alkali refining agent of textile industry, inhibit elimination of treatment before
3. Circuit board cleaning
4. Oil mud defoaming in the process of mining
5. Textile printing and dyeing processing
6. Agricultural chemicals
5:Appearance and Properties: colorless transparent dense liquid
Products Description
Melting point
â??59 �°C(lit.)
Boiling point
101 �°C(lit.)
density
0.963 g/mL at 25 C
vapor density
>1 (vs air)
vapor pressure
<5 mm Hg ( 25 C)
refractive index
n20/D 1.377(lit.)
Fp
>270 C (518 F)
storage temp.
2-8C
form
Oily Liquid
color
Clear colorless
Specific Gravity
0.853
Odor
Odorless
Water Solubility
PRACTICALLY INSOLUBLE
