Ffp3 Cupped Valved Mask Suppliers and Manufacturers

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Optional feature Valved or nonvalved Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 99 Disposable Inward leakage lt2 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants  It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Decide for yourself Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step Choose the design Cupped or Folded Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask I want the folded FFP3 respirator mask The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup  However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles I want the nonvalved FFP3 respirator mask Nonvalved FFP3 masks offer a twoway protection Our respirator masks will be effective whether your goal is to avoid inhaling the virions or avoid spreading the virus to people close to you A mask without a valve is also less bulky being a more lightweight solution I want the nonvalved FFP3 respirator mask Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both handsto ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask

FFP3 Cup-Shaped Respirator Face Mask without Valve Valveless, avoid projecting contaminating particles into the air With adjustable head straps CE approved by UNIVERSAL (NB no. 2163) Tested and certified according to EN 149:2001+A1:2009 Class: FFP3 NR This valved respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.

FFP3 Cup-Shaped Valved Respirator Face Mask Easy to breathe with an exhalation valve CE approved by UNIVERSAL (NB no. 2163) Tested and certified according to EN 149:2001+A1:2009 Class: FFP3 NR * Small orders are acceptable. This valved respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.

We offer all types of FFP3 face masks. Our FFP3 filtering half masks are manufactured in accordance with regulation (EU) 2016/425 of the European Parliament and of the council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC and EN 149:2001+A1:2009 Respiratory protective devices Filtering half masks to protect against particles Requirements, testing, marking. The masks are non-reusable particle filtering half masks and intended exclusively for personal protection. FFP3 cup type filtering half masks are designed and produced to protect against both solid and liquid aerosols, which can be only used in the general working environment. The mask cannot be used under the following environment(s): - Do not use inflammable or explosive environment; - Do not use for respiratory protection against atmospheric contaminants/concentrations which are unknown or immediately dangerous to life and health.

Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services

we can offer 300 millions masks OTG USA inspect and pay price 1.85 per mask

Black mask production is not done due to its harm to human health. * Produced at EN 14683 and 93/42/EEC standards. * The mask, produced from non-woven material, is anti-allergic. * Medical Surgical Mask does not contain fiber glass, rubber latex, dry rubber, latex, and glass fiber materials. * Mask providing comfortable breathing is suitable for use with protective goggles. * There is a 50-gr Spunbond fabric on the 1st front layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 2nd middle layer, 30-gr Spunbond fabric on the 3rd middle layer of the 5-layer mask, an electrostatic charged 25 gr MELTBLOWN fabric that prevents the entry of microbes such as virus, bacteria etc. on the 4th middle layer, and a 25 gr Spunbond fabric on the 5th back layer. * It has a polypropylene (PP) coated, aluminum, soft and adjustable double nasal wire. * The mask fabrics made of PP raw material carry odors, caused by the production and due to subsequent transportation, storage, humidity in the storage area and other reasons, that disturb the mask users. * OURMASK offers you N95 masks with lavender oil and antiseptic properties. N95 masks with the scent of lavender are offered for your use as being free from germs and bacteria due to the antiseptic feature of lavender oil. The scent of lavender in our masks is obtained from lavender oil, not from lavender essence. Packaging Information

Nickel sludge, zinc ash, copper ore, lead ore, chrome ore, manganese ore, bauxite ore, iron ore, iron ore pellets, tin ore, ir64 rice, ir 64 5% broken rice, zinc ash, raw red chilli, chrome ore, iron skull, 1121 sella white basmati rice, 3 ply surgical masks.