We offer soya , sunflower and rapeseed lecithin liquid.
We offer Premium Alfalfa Hay, Rhodes Grass, Oats Hay Ready / Oats Hay Animal Feed Packed as as required. 15kg cube, 10kg cube, 50kg cube, 120kg roll, 320kg roll SPECIFICATIONS; CRUDE PROTEIN (ODM) 16-18 % ADF Acid Detergent FIbre 32-35 % (plus/minus 10 percent) NDF Neutral Detergent Fibre 40-44 % (plus/minus 10 percent) MOISTURE : 12 % MAX AFLATOXIN : 20 ppb MAX PURITY : > 90% CHOP SIZE: > 10 cm GMO : Free RADIATION : Free DRIED : DRIED : Suncured
We offer contract spray drying located in Poland for chemical and food.
Urea Fertilizer 46% N GOST 2081-92 Prilled Urea (Prilled) GOST 2081-92 Nitrogen: 46.0% MIN (ON DRY BASIS) Moisture: 0.5% Max Biuret %age By Weight: 1.0% MAX Particle Size (i) Material Passing thro ugh 2.8mm IS Sieve (Tyler Sieve 7) and retained on 1mm IS Sieve (Tyler Sieve 16) by weight i) To pass through 1mm IS Sieve by weight : 90% MIN,5% MAX MELTING POINT: 132 Degrees Celsius COLOUR: Pure white RADIATION: NON-Radioactive. FREE FLOWING: 100% Treated against caking, free from harmf ul substances. PHYSICAL: PRILLED, free from harmf ul substances, impurities & dust. FREE AMMONIA: 160 PXT, PPM. MAX. UREA 46%N Agriculture grade PRILLED | GRANULAR -GRADE EXTRA- | Total nitrogen: 46.2% min. | Humidity: 0.3% max. | Biuret: 1% max. | Allowed production class: 0.85-2 mm/2-4 mm. | Formaldehyde: 0.35 - 0.55% min. | Free Ammonia: 50 ppm. | Resistance to fragmentation: 3 kg for granule with a diameter of 3.15 mm. | Temperature: Max 50 min 5 | Density: 760 to 800 kg / m3 | Appearance: white Granules. -Get your shipment from our factory DIRECTLY. -We ship Urea 46%N either in Bulk loose in shipload OR FIBC 1Mt OR 50 kg bag package of woven polymeric laminated, polyethylene bags. -Two years validity in optimal storing conditions. -ETD 8000 Mt=10 days, prices vary according to packing terms
Urea formaldehyde, phenyl formaldehyde, marine formaldehyde, epoxy resins, subhcol resin.
Urea formaldehyde resin, melamine formaldehyde resin.
Formaldehyde, urea, melamine, phenol and formaldehyde based resins.Buying agent, selling agent
Ethyl Hexyl Acrylate CAS Number 103-11-7 Formula C11H20O 2-Ethylhexyl acrylate belongs to the acrylates. It appears as a clear colorless liquid with a pleasant odor. It is less dense than water and insoluble in water. and the vapors are heavier than air. With a flash point 180�°F. it is used in making of paints and plastics. SPECIFICATION Color 5 APHA Purity 99.9 wt % Water 0.01 wt % Acidity (as Acrylic acid) 0.002 wt % Inhibitor (MEHQ) 75 ppm MAJOR USE: As a plasticizing co-monomer, 2-ethylhexyl acrylate is used in the production of resins for pressure-sensitive adhesives, latex, paints, textile and leather finishes and coatings for paper. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
N Propanol CAS Number 71-23-8 Formula C3H8O Normal propanol is a primary alcohol with a molecular formula of C3H8O. It is a colorless, transparent liquid that has a typical sharp musty odor that is comparable with the smell of rubbing alcohol. The product is fully miscible in water and freely miscible with all common solvents such as glycols, ketones, alcohols, aldehydes, ethers and aliphatic hydrocarbons. SPECIFICATION Purity 99.89 wt% Water Content 0.02 wt% Color 5 APHA Specific gravity (20/20�°C) 0.8050 Acidity as Acetic Acid 0.0010 Distillation range at 760mmHg 96.8-97.1 Non-Volatile Matter (g/100mL) 0.001 Appearance Free from insoluble and haze MAJOR USE: N-propanol is used as a solvent in the manufacturing of pharmaceuticals, polishes, dental lotions, coatings, lacquers, printing inks, natural gums, pigments, intermediates, dye solutions, antifreeze, fuel additives, paint additives and de-greasing fluids. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Tetrahydrofuran (THF) CAS Number 109-99-9 Formula C4H8O or (CH2)3CH2O Tetrahydrofuran (THF) is a clear, colourless, volatile, and water-miscible liquid. It has low viscosity at standard temperature and has the formula C4H8O. It has smell similar to diethyl ether and is one of the most polar ethers. SPECIFICATION Appearance Clear Liquid Purity 99.993 wt % Color < 5 APHA Moisture 52 ppm Peroxides 8 ppm Specific Gravity (20/4�°C) 0.88746 Refractive Index 1.4071 MAJOR USE: As a solvent for special resins such as photosensitive resins, because even at room temperature it can dissolve various resins, and it is miscible with water and most organic solvents. In, addition, it is used as a solvent for Grignard and Wittig reactions. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Urea (Technical Grade) CAS Number 57-13-6 Formula CH4N2O or NH2CONH2 Urea is a nitrogenous compound containing a carbonyl group attached to two amine groups with formula CH4N2O. It is a colorless, odorless solid, highly soluble in water, and non-toxic. It has pKa close to 0. It is neither acidic nor alkaline. Urea is widely used in fertilizers as a source of nitrogen (N) and is an important raw material for the chemical industry. SPECIFICATION Nitrogen Content (as Total N) (on Dry Basis) 46.30 % Moisture 0.07 % Biuret 0.82 % Sieve Analysis (1mm-3mm) 91.75 % MAJOR USE: In Dyes and Pigment industries. Used in cattle feed. Used for manufacturing of Urea Formaldehyde resin. Used in production of Diesel exhaust fluid for pollution abatement. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Melamine CAS Number 108-78-1 Formula C3H6N6 or C3N3(NH2)3 Melamine is an organic base and a trimer of cyanamide, with a 1, 3, 5-triazine skeleton having formula C3N3(NH2)3. This white powder contains 66% nitrogen by mass and, if mixed with resins, has fire retardant properties due to its release of nitrogen gas when burned or charred, and has several other industrial uses. SPECIFICATION Purity Min. 99.8 % wt Water Max. 0.1% wt Color Max. 20 APHA Ash Max. 0.03% wt MAJOR USE: In making thermosetting plastics, ire-retardant additives in paints, plastics, and paper. A melamine fibre, Basofil, has low thermal conductivity, excellent flame resistance and is self-extinguishing; this makes it useful for flame-resistant protective clothing, either alone or as a blend with other fibres.
Maleic Anhydride CAS Number 108-31-6 Formula C4H2O3 Maleic anhydride is an organic compound with the formula C4H2O3. Maleic anhydride is a cyclic dicarboxylic anhydride. It is a colorless or white solid with an acrid odor. Maleic anhydride is produced by oxidation of benzene or a C4 hydrocarbon such as butane in the presence of a vanadium oxide catalyst. SPECIFICATION Appearance White Briquettes Purity 99.96 wt% Molten Color 10 APHA Molten Color After Heating 14 APHA Solidification Point 52.6 C Ash Content 4.99 ppm Iron Content 0.47 ppm MAJOR USE: Maleic anhydride has a very broad range of uses from food additives to industrial applications. synthetic resin raw material (unsaturated polyesters), paints and coatings., resin modifiers., vinyl chloride stabilizers., food additives (fumaric acid, succinic acid, malic acid), agricultural chemicals, paper sizing agents, imides. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Ethyl Acylate CAS Number 140-88-5 Formula C5H8O2 Ethyl acrylate is an acrylate monomer with a molecular formula of C5H8O2. It is a clear and volatile liquid which is slightly soluble in water and completely soluble in alcohols, ethers and almost all organic solvents. It is a very flammable liquid and has a sharp acrid odour. SPECIFICATION Colour 5 APHA Purity 99.9 wt% Water 0.01 wt% Acidity (as Acrylic acid) 0.000 wt% Inhibitor (MEHQ) 50 ppm MAJOR USE: As a raw material for fiber processing agents, adhesives, coatings, plastics, acrylic rubber, and in the production of emulsion-base polymers. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Ethyl Acetate CAS Number 141-78- Formula 6 C4H8O2 or CH3COOC2H5 Ethyl acetate is the acetate ester formed between acetic acid and ethanol with a molecular formula of C4H8O2. It is a colourless liquid with a fruity characteristic odour that is commonly recognized in glues and nail polish remover. This product is highly flammable and it is miscible with all common organic solvents (alcohols, ketones, glycols, esters) but only slightly miscibility in water. SPECIFICATION Water 120 mg/kg Acidity (as Acetic Acid) 21 mg/kg Platinum Cobalt Color 5 Relative Density at 20/20�°C 0.9021 Distillation Range of Volatile Organic Liquid - Initial Boiling Point 76.9 �°C Dry Point 77.5 �°C Distillation Range 0.6 �°C Non-Volatile Matter < 1 mg/100mL Residual Odor Non-Residual Alcohol Content and Purity of Acetate Esters by GC - Ethanol 100 mg/kg Ethyl Acetate 99.94 %(m/m) MAJOR USE: Ethyl acetate is a widely used solvent, especially for paints, varnishes, lacquers, cleaning mixtures, and perfumes. Like last week's MOTW, dichloromethane, it is used as a solvent for decaffeinating coffee beans. In the lab, ethyl acetate is a common solvent for column and thin-layer. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Acrylic Acid CAS Number 79-10-7 Formula C3H4O2 Acrylic acid is an organic compound with the formula CH2=CHCOOH. It is the simplest unsaturated carboxylic acid, consisting of a vinyl group connected directly to a carboxylic acid. Acrylic acid is a clear and colorless liquid with a distinctive acrid (tart) odor. It is miscible with water, alcohols and ethers. SPECIFICATION Purity 99.9 wt% MQ 208 ppm Acrylic Acid Dimer 0.02 wt% Water Content 0.12 wt% Colour 5 Appearance Clear MAJOR USE: In the production of acrylic esters and resins, which are used primarily in coatings and adhesives. It is also used in oil treatment chemicals, detergent intermediates, water treatment chemicals, and water absorbent polyacrylic acid polymers. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Dimethylformamide (DMF) CAS Number 68-12-2 Formula C3H7NO or HCON(CH3)2 Dimethylformamide appears as a water-white liquid with a faint fishy odor having chemical formula HCON(CH3)2. It is widely used in industries as a solvent, an additive, or an intermediate because of its extensive miscibility with water and most common organic solvents. SPECIFICATION Appearance Clear Liquid Color (APHA) 3.0 APHA pH at 25C in 20% solution 7.0 Conductivity in 20% water @ 250C 0.80 Dimethyl Formamide Content 99.98 wt % Water Content 0.005 wt % Methanol Content < 0.001 wt % Acidity as Formic Acid (mg/kg) 4.0 Base as DMA (mg/kg) 1.0 Iron ppm 0.010 MAJOR USE: In production of acrylic fibers and plastics, used as a solvent in peptide coupling, in the development and production of pesticides, and in the manufacture of adhesives, synthetic leathers, fibers, films, and surface coatings.
Acrylonitrile CAS Number C3H3N or H2C(CH)CN Formula 107-13-1 Acrylonitrile is a clear, colorless or pale-yellow liquid at room temperature with chemical formula H2C(CH)CN. It has a sweet, sharp odor like onion or garlic. It is soluble in water and is volatile in nature. Acrylonitrile is an important commercial chemical. SPECIFICATION Acrylonitrile 99.60 wt % Acetone 1 ppm Oxazole 1 ppm Acetonitrile 5 ppm Propionitrile 11 ppm Methyl acrylonitrile 15 ppm Acrolein 103 ppm Acidity (as Acetic acid) 8.8 ppm Aldehydes (as Acetaldehyde) 6 ppm HCN 1.2 ppm Copper 0.01 ppm Iron 0.01 ppm Water 0.39 wt.% Peroxides Less than 0.01 Appearance Clear Color (APHA) 10 APHA Inhibitor (MEHQ) 37 ppm Non-volatile matter (ppm mass) 56.0 Oxygen bomb stability (hours) More than 4 pH 6.8 Tritation Value (mL) Less than 0.5 MAJOR USE: In the manufacture of acrylic and modacrylic fibres for use in clothing and textiles, such as fleece jumpers, sportswear, carpets and upholstery. Acrylic fibres are also used as a precursor in the production of carbon fibre. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Isopropyl Alcohol CAS Number 67-63-0 Formula C3H8O Isopropyl alcohol is a secondary alcohol.it appears as volatile, colorless liquid with a sharp musty odor. Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform. SPECIFICATION Appearance Clear and Bright Platinum Cobalt Color 5 Pt/Co Water Content 0.037 % (m/m) Water Miscibility Pass Density at 20�°C 0.7851 g/cm3 Acidity (as Acetic Acid) 0.0005 % (m/m) Carbonyl Content (as CH3COCH3) 38.2 mg/kg Non-Volatile Matter < 0.001 %(m/m) Sulphur < 1 mg/Kg Purity 99.92 %(m/m) MAJOR USE: Rubbing-alcohol antiseptic, aftershave lotions, hand lotions, and other cosmetics. In industry it is used as an inexpensive solvent for cosmetics, shellacs, and gums, as well as for denaturing ethanol (ethyl alcohol). These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Ethylene Dichloride (EDC) CAS Number 107-06-2 Formula ClCH2CH2Cl or C2H4Cl2 Ethylene Dichloride is a clear, colorless, oily, synthetic, flammable liquid chlorinated hydrocarbon with a pleasant chloroform-like smell that emits toxic fumes of hydrochloric acid when heated to decomposition. It is miscible in methanol, diethyl ether, n-octanol, acetone, very slightly miscible in water. SPECIFICATION Acidity (as HCl) 1.67 ppm wt. Appearance Clear Liquid Color (APHA) 10 APHA Distillation Range 0.3C Iron 0.20 ppm wt. Density at 15C 1.2602 g/mL Water 30 ppm wt. Purity 99.98 wt.% High Boilers 187 ppm wt. Low Boilers 41 ppm wt. Benzene < 1 ppm wt. Residue on Evaporation < 5 ppm wt. Free Chlorine NIL MAJOR USE: As a raw material in the manufacture of vinyl chloride monomer (VCM), polyvinyl chloride (PVC) pipes, packaging materials, furniture, auto mobile parts, wall coverings and housewares EDC is also used as an intermediate in the manufacture of chlorinated and fluorinated compounds. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.