Good X-ray transmission Good waterproof and moisture resistance Good waterproof and moisture resistance Introduction: The polymer fracture splint is a functional polymer, in which the peptide fiber layer is sterilized by ethylene oxide and used in combination with the polymer bandage to achieve a double-effect combination, used for fixation and bandaging of fracture, dislocation, soft tissue injury and other parts. Outstanding advantages Good X-ray transmission Good waterproof and moisture resistance Good waterproof and moisture resistance Usage 1.Select the appropriate type of polymer splint according to the required fixed part. 2.Open the packaging (open one bag at a time, not more than one at a time to avoid failure), remove the splint, soak it in room temperature water for 3~4 seconds and squeeze it for 2~3 times. 3.Remove the excess water and wipe off the water droplets on the surface of the splint. 4.Put it on the place that needs to be fixed, shape it, wrap it with gauze bandage or elastic bandage in spiral form, with moderate tightness. Scope of application Orthopedic or orthopedic fixation, used for orthopedic, hand surgery fracture, sprain, soft tissue, joint ligament tendon fixation, braking.Production of molds, prosthetic AIDS, protective supports for burns, etc. Matters needing attention 1.This product is only for use by medical practitioners 2.If more than two bags are needed, open the second bag after using one bag, and do not open the second bag at the same time. 3.Store it in a dry environment at room temperature, and the packaging bag should not leak air to avoid hardening and failure
Orthopaedic polymer splint is composed of multilayer polymer fiber soaked by polyurethane and polyester. Product Details Introduction:Orthopaedic polymer splint is composed of multilayer polymer fiber soaked by polyurethane and polyester.This product is used in the medical field because of its good biocompatibility. Medical polyurethane is non-toxic and has no teratogenic effect. It has no local irritation and allergic reaction The basic information Name Orthopedic Polymer Splint Appropriate people Fracture patients, orthopedic fixation, sprain Side effects No Storage Store at room temperature and dry place Advantage Convenient operation Sanitary Light, comfortable and suitable Easy to observe injured part Air permeability Good chemical stability The material classification Glass fiber and polyester,namely glass fiber high polymer splint and polyester high polymer splint. Scope of application Orthopaedic or orthopedic fixation, joint ligament tendon fixation, braking. Production of molds, prosthetic AIDS, protective supports for burns, etc.
The high polymer splint is composed of many layers of high polymer fiber soaked by polyurethane and polyester. Product Details Introduction The high polymer splint is composed of many layers of high polymer fiber soaked by polyurethane and polyester. Feature High hardness and light weight Little and light Equivalent to the 1/5 weight of gesso,1/3 weight of polyester Smaller load on injured body Better blood circulation Advantage High hardening speed High strength Waterproof Will not cause itching, ulceration and odor. Method of use 1.Select the appropriate type of polymer splint according to the required fixed part. 2.Open the packaging (open one bag everytimeto avoid failure), remove the splint, soak it in room temperature water for 3~4 seconds and squeeze it for 2~3 times. 3.Remove the excessive water and wipe off the water droplets on the surface of the splint. 4.Put it on the place that needs to be fixed, shape it, wrap it with gauze bandage or elastic bandage in spiral form, with moderate tightness. Samples Photos
Medical Polymer Orthopedic Splint Production:Medical Polymer Orthopedic Splint which is designed specifically for Fixation for fracture , sprain and pull. Product Details Production:Medical Polymer Orthopedic Splint which is designed specifically for Fixation for fracture , sprain and pull. Product description Good waterproofing quality The moisture -absorbed percent is 85% less than plaster bandage, Even the patient touch the water situation, it still could keep dry in the injury position. Comfortable & safe to patient/doctor Material is friendly to operator and it wont become tension after concretion. Usage method 1?Choose the appropriate size splint according to different parts. 2?According to the actual needs, the splint is shaped and trimmed. The curing time is 3 to 5 minutes, and it is wrapped and fixed with ordinary gauze bandage or elastic bandage. After 20 minutes, it can bear full load. Matters needing attention 1?Avoid use in areas where swelling may occur. 2?When the packing is damaged, it is forbidden to use it; it is forbidden to reuse it.
Medical Polymer Fracture Splint Production Medical Polymer Fracture Splint which is designed specifically for Fixation for fracture , sprain and pull. Product Details Production:Medical Polymer Fracture Splint which is designed specifically for Fixation for fracture , sprain and pull. Application Fixation for fracture, sprain and pull Good air permeability Thereby preventing unnecessary infection in the process. Protection of injured parts Reduction of pain, Prevention of impact Convenient movement Easy X-ray diagnosis Product description 1.Curing Speed It ossifies in 3-5 minutes after open the package and could bear weight after 20 minutes,But plaster bandage need 24 hours for full concretion. 2.Excellent X-ray Projection Good x-ray penetration ability makes X-ray photo clearly without remove the bandage, but plaster bandage need remove to make x-ray inspection. 3.Simple operation Room temperature operation, short time, good molding feature. Usage method 1 Choose the appropriate size splint according to different parts. 2 Open the package, soak the splint in room temperature water for 5 - 6 seconds and extrude it 2 - 3 times at the same time, then extrude the excess water. 3 According to the actual needs, the splint is shaped and trimmed. The curing time is 3 to 5 minutes, and it is wrapped and fixed with ordinary gauze bandage or elastic bandage. After 20 minutes, it can bear full load. 4 Cut the gauze bandage or elastic bandage to remove it.
Polymer Splint Fracture Splint Production Polymer Splint Fracture Splint which is designed specifically for Fixation for fracture , sprain and pull. Product Details Production:Polymer Splint Fracture Splint which is designed specifically for Fixation for fracture , sprain and pull. Product description 1.Simple operation Room temperature operation, short time, good molding feature. 2.High hardness & light weight 20 times hard than plaster bandage; light material and use less than plaster bandage. 3.Lacunary (many holes structure) for excellent ventilation Unique knitted net structure make sure good air ventilation and prevent skin damp and hot & pruritus. 4.Environment friendly Material are environmental friendly, which could not produce polluted gas after inflammation. Usage method 1?Choose the appropriate size splint according to different parts. 2?Open the package, soak the splint in room temperature water for 5 - 6 seconds and extrude it 2 - 3 times at the same time, then extrude the excess water. 3?Cut the gauze bandage or elastic bandage to remove it. Matters needing attention 1?Avoid use in areas where swelling may occur. 2?When the packing is damaged, it is forbidden to use it; it is forbidden to reuse it. Advantage 1. Good quality: we have good reputation in the world market. 2. Good deliver: we have big discount and ensure that safety delivery. 3. Strict quality control before shipment
Introduction:This item is made from medical materials which are used in medical devices such as polyurethane orthopaedic fixation bandage Product Details Introduction:This item is made from medical materials which are used in medical devices such as polyurethane orthopaedic fixation bandages, artificial heart catheters, cardiac pacemakers, blood filters and artificial kidney hollow fiber dialyzers. Range of application: medical industry Advantage ?Comfortable and safe ?Good air permeability ?Light weight and high hardness ?Excellent projection ?Easy to operate, flexible, good molding ,water temperature action By adjusting the water temperature, the hardening time can be adjusted.Low water temperature, longer hardening time. Instruction 1.Choose suitable size. 2.Keep it at room temperature and in the water for 3 to 4 s.
High Quality Polymer Roller is one of our main product. Custom Polymer Roller is suitable for the steel industry, harbor, coal industry, power industry, cement industry, etc. We will be your best choose! Polymer roller manufacturer:Hengguang Conveying Machinery Notes: Application: High Quality Polymer Roller High Quality Polymer Roller is Used under loading points where material impact (lump size,density, height) could damage the belt if no cushion. Impact Idler fitted with rubber rings made from natural / Synthetic / Neoprint material. The fixing arrangement and dimension of rings are suitably design for easy replacement and interchangeability which protect the belt by absorbing impact at loading point. 20º, 35º and 45º Trough Angle. It is suitable for the steel industry, harbor, coal industry, power industry, cement industry, etc. it's widely used in Chemical Industry,Fertilizer, Salt, Sugar, Pulp Paper, Acid and Alkaline, General Industry,Coal Mining, Cement, Concrete, Limestone and Quarry.
Super tank Polymer Concrete Electrolytic Cells are designed, built and installed to satisfy the most stringent requirements requested by tank house operators worldwide. In most case their main request is to guarantee full operating availability throughout the plant' s lifespan, maximizing production of high-purity metal (copper, zinc, nickel, cobalt, lead or other) with absolute safety for people and the environment. Additionally, Polymer Concrete Electrolytic Cells must accommodate changes for continuous improvement of electrolytic process, integrating efficiently with upgrades of complementary equipment such as anodes, cathodes, cap boards, overhead crane, electrolyte agitation systems, acid mist control devices, thermal insulation, among many others. Super tank electrolytic cells are cast monolithically based on a patented, three stratum composite material system. the internal stratum is a monolithic tank made with multiple layers of fiber-reinforced vinyl ester resin (FRP) complying with chemical barrier international norms that assure long term impermeability and corrosion resistance. the intermediate stratum is the structural core made with Hyperbonded Polymer Concrete, with a patented formulation to achieve a low coefficient of thermal expansion, providing long term structural integrity with low thermally-induced stresses. the external stratum is a standard seal layer of FRP that further protects the structural core from electrolyte splashes and spills. Optionally, this external seal may be specified with multi-layered oriented fiber reinforcements to guarantee trouble-free operation in unusually extreme operating environments.
Super tank Polymer Concrete Electrolytic Cells are designed, built and installed to satisfy the most stringent requirements requested by tank house operators worldwide. In most case their main request is to guarantee full operating availability throughout the plant' s lifespan, maximizing production of high-purity metal (copper, zinc, nickel, cobalt, lead or other) with absolute safety for people and the environment. Additionally, Polymer Concrete Electrolytic Cells must accommodate changes for continuous improvement of electrolytic process, integrating efficiently with upgrades of complementary equipment such as anodes, cathodes, cap boards, overhead crane, electrolyte agitation systems, acid mist control devices, thermal insulation, among many others. Super tank electrolytic cells are cast monolithically based on a patented, three stratum composite material system. the internal stratum is a monolithic tank made with multiple layers of fiber-reinforced vinyl ester resin (FRP) complying with chemical barrier international norms that assure long term impermeability and corrosion resistance. the intermediate stratum is the structural core made with Hyperbonded Polymer Concrete, with a patented formulation to achieve a low coefficient of thermal expansion, providing long term structural integrity with low thermally-induced stresses. the external stratum is a standard seal layer of FRP that further protects the structural core from electrolyte splashes and spills. Optionally, this external seal may be specified with multi-layered oriented fiber reinforcements to guarantee trouble-free operation in unusually extreme operating environments.
Super tank Polymer Concrete Electrolytic Cells are designed, built and installed to satisfy the most stringent requirements requested by tank house operators worldwide. In most case their main request is to guarantee full operating availability throughout the plant' s lifespan, maximizing production of high-purity metal (copper, zinc, nickel, cobalt, lead or other) with absolute safety for people and the environment. Additionally, Polymer Concrete Electrolytic Cells must accommodate changes for continuous improvement of electrolytic process, integrating efficiently with upgrades of complementary equipment such as anodes, cathodes, cap boards, overhead crane, electrolyte agitation systems, acid mist control devices, thermal insulation, among many others. Super tank electrolytic cells are cast monolithically based on a patented, three stratum composite material system. the internal stratum is a monolithic tank made with multiple layers of fiber-reinforced vinyl ester resin (FRP) complying with chemical barrier international norms that assure long term impermeability and corrosion resistance. the intermediate stratum is the structural core made with Hyperbonded Polymer Concrete, with a patented formulation to achieve a low coefficient of thermal expansion, providing long term structural integrity with low thermally-induced stresses. the external stratum is a standard seal layer of FRP that further protects the structural core from electrolyte splashes and spills. Optionally, this external seal may be specified with multi-layered oriented fiber reinforcements to guarantee trouble-free operation in unusually extreme operating environments.
MAISSEN REDISPERSIBLE POLYMER POWDER Redispersible polymer powder is soluble in water. Maissen RDP is based on Vinyl acetate ethylene copolymer and used PVA as the protection collid. Could disperse in water very well and form the emulsion. Maissen redispersible polymer powder can increase the fleibility, workability, bonding strength and water proofing of mortar. Can be widely usedd in many kinds of dry mortar. Application Recommendation: Wall putty, tile adhesive, EIFS surface mortar, EIFS adhesive mortar, plaster, joint filler. Package: 25kgs per bag 20'FCL can load 14 tons with pallets / 16 tons without pallets 40'FCL can load 28 tons with pallets
APD type--Automatic Polymer Preparation System Made by SUS-304 with corrosion resistant material and completely auto-operation to assure the highest efficiency and lowest cost of operation and maintenance. Innovative design of the wetting mixing device to prevent congeal and uneven mixing, and also be designed to multi-tank for speedy mixing and storage for continuous usage. This device has no limit in every kind of industry, such as Municipal, Settling, Flotation, Petrochemical, Sulphate, Plating, Paper Mill and other process. Besides, we will do customize as client's request.
SAP( Super Absorbent Polymer). chemical name: Polyacrylic acid sodium salt, sodium polyacrylate CAS No. 9003-04-7 SAP For Sanitary Napkins,SAP for sanitary towel, SAP for feminine hygiene,SAP for Agriculture, Super Absorbent Polymer, SAP For Diaper. Appearance: white crystal. Free absorbency of Distilled water:450~550 g/g Free absorbency of saline solution: 50 min. g/g Centrifugal Retention capacity: 35 ming/g Absorbency under Load 0.3 psi,: 26 min. Absorbency under Load 0.7 psi,: 20 min, Absorption speed (by vorlex Method): 60 s max. Moisture: 7.0% max.
SKYPE: dave.zhang88 Super absorbent polymer,SAP,water absorbent polymer: can swell hundreds of times in water to form a clear gel. It is able to absorb, store and release water and nutrient for promoting plant growth even against pressure. It is widely used by mixing with soil or substrate to preserve water and nutrionts,small plants, agriculture and non-soil transportaion.
Major Features: 1 . High energy density,Good consistency, low self discharge. 2 . High working voltage for single battery cell. 3 . Pollution-free. 4 . Long cycle life. 5 . No memory effect. 6 . Capacity, resistance, Voltage, platform time consistency is good 7 . Light weight, small size
Manufacturer leading quality OH Terminated Polydimethylsiloxane CAS: 70131-67-8 High molecular OH-terminated Polydimethylsiloxane CAS No. :70131-67-8 MOLECULAR FORMULA :HO[-Si(CH3)2O-]nH Other Names: 107hydroxy silicone oil, Hydroxy polydimethylsiloxane, Hydroxyl-terminated polydimethylsiloxane, OH-termianted silicone oil, OH-terminated silicone polymer, High molecular hydroxy silicone oil, Hydroxy end group polydimethylsiloxane, OH Polymer, Dihydroxyl polydimethylsiloxane, Hydroxyl dimethyl polysiloxane, Silanol-terminated polydimethylsiloxane, Polydimethylsiloxane silanol Terminated. JP107 Polymer Hydroxyl silicone oil is the organosilicon material polymerized by siloxane monomer terminated with hydroxyl groups . Conventionally the hydroxyl silicone oil with viscosity above 1500 mpa.s is called 107silicone sealant/adhesive. Apart from general functions of hydroxyl silicone oil, this product possesses the reactivity of hydroxyl group that can be made into some new material or crosslinked as elastomer(or film body). This product is colorless transparent liquid with excellent electrical insulation, high and low temperature resistance,high flash point, low freezing point,long-term adaption to temperature from -50°C to 250°C, low viscosity-temperature coefficient, high compression rate, low surface tension, good water repellent and moisture resistance, chemical inertness, physical inertness. [MAIN PROPERTIES] Excellent waterproof and dustproof performance; Sealing for various installation of aluminum alloy glass doors and windows; Sealing for organic glass, polycarbonate. Excellent weather resistant performance and excellent ageing resistant performance; Excellent adhesion to most of building materials and excellent compatibility with other neutral silicone sealants. APPLICATION Used as main raw material in RTV mold silicone rubber, defoamer and silicone glass cement. 1. Used as insulating, moisture resistant, anti-shock and heat resistant perfusion sealing material in radio, electronic equipment, semiconductor and other electronic components and assemblies. 2. Used as rubber roller material in automobile and machinery industry. 3. Used as rubber roller material in textile, plastic and printing industry. 4. Caulking sealing material in construction industry. 5. It has excellent mold release performance, particularly suitable for the manufacture of precision mold and impression materials.
Product Description: We are working with highly experienced packaging experts and they make every endeavor to meet the personalized and standard requirements of the clients. We sternly make our product safe from external factors. We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients.
Product Description: We are working with highly experienced packaging experts and they make every endeavor to meet the personalized and standard requirements of the clients. We sternly make our product safe from external factors. We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients.
Product Description: We are working with highly experienced packaging experts and they make every endeavor to meet the personalized and standard requirements of the clients. We sternly make our product safe from external factors. We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients.