Magnetic check valve was designed with magnet diaphragm, and sealed by the metal. it was used on the exhaust pipe of the compressor, for inside, it uses guide device and automatic suchtion design thant prevent reverse refrigerant flow in liquid lines and compressor discharge lines.
1. Its Material Is PVC 2. Size: 3/4" - 8"(20mm-200mm). 3. Alkali and acid resistant 4. Standard: DIN, ANSI, JIS. 5. With Socket End. 6. 100% factory tested no leak. 7. Durable and long lasting. Packing: box or poly bags, Carton.
Check valve class Full port pressure temperature rating 200 psi w.O.G. 350 f.S.P. Threaded ends conform to ansi b 2.1, bs 21, din 259/2999, stainless steel class 200 screwed cap, swing type disc, integral seat. 1/4"---4"
- This is a IBR approved in line FLOW CHECK VALVES for use in any application Water, Condensate, Liquid etc. - Ensure that there is no reverse flow in the line. - Maximum pressure 47.5 kg/cm2 at 105°c. - Material ASTM A 315 Gr. CF8M (SS 316). - Easy installation, fits between flanges joint in any class. - Sizes available 15 NB to 100 NB, large size available on request. - Valve must be fitted with the direction of flow being according to the direction arrow indicated on the body of the valve.
JYL Forged Cw617n Brass Chinese Factory Check Valve Item no:JYL-7107 Size:1/2",3/4",1",1 1/4",11/2",2",21/2",3",4" Function: Water pump necessary brass valve, applicable to mounting in the horizontal pipelines,inside filter net to prevent blockage and backflow, easy operating...
It is also a type of check valve that operates because of the difference between upstream & downstream pressures. When the inlet pressure is high then the disc lifts up and the valve allows the fluid to flow to the outlet side. If the downstream or gravity pressure if higher than inlet pressure the disc gets back to its seat. This way reverse flow is blocked. For the smooth process it is important to have durable working disc and this is what we offer. We examine the raw material to be used in our product’s exporting. This results in durable quality production.
Wafer check valve is another type of check valve that allows only unidirectional flow. The advantage of employing check valves is that they automatically block the reverse flow with the change in pressure difference. Wafer check valves have thin design with the swinging disc as the main component. These valves are made to fit in tight spaces so it is desired to get them accurately designed. We offer cut-to-cut exporting and ensures its proper functioning before releasing the consignment.
Check valves are two port valves i.e. two sides opened. Swing check valve allows unidirectional flow. From one side fluid enters and from other it leaves. These are automatic valves that do not require open and close assistance. As they have single directional functionality, thus, automatically prevents backflow or reverse flow. We at Suraj Steelmet maintain inventory of finished swing check valves at best competitive prices.
Ingersoll rand reciprocating piston air compressor 15T2 check valve 32162943
Valves are used in a variety of applications including industrial, military, commercial, residential, and transportation. Oil and gas, power generation, mining, water reticulation, sewerage and chemical manufacturing would constitute the majority of valves used by industry. The body material is grey cast iron, ductile iron or carbon steel. check valves are mechanical device allowing fluid to flow through it in one direction. These valves have two ports or two openings. From one opening the fluid enters while from the other the fluid leaves. These valves have many applications.
Lift Check Valve The disc of lift check valve is located on the valve seat sealing surface. And the disc can be free to move up and down, other parts is like a globe valve. When the fluid passes, the disc is lift from the seat sealing surface. When the fluid back flow, the disc falls back onto the seat and cut off the flow. Depending on the condition of using, the disc can be made of full metal construction, or be in rubber or rubber ring on the disc holder. Specification: Size: 1/2~12 Pressure Rating: Class150~2500LB Main Materials: WCB, WC6, WCC, LCB, CF8, CF8M, CF3, CF3M, 4A, LF2, F304, F316 etc. Design and Manufacture: BS 1868, ANSI B16.34 Face-to-Face:ASME B16.10, DIN3202 Pressure-temperature Ratings: ASME B16.34 Ends Connection: Flange, Butt Welding Inspection & Testing: API 598, EN12266 Feature: Bolted Bonnet - BB Lift or Piston Type Horizontal or Vertical Service Non-penetrate Disc Shaft
Swing Check Valve The swing check valve is also called non-re valve. The function is to prevent the fluid in the pipeline back flow. Swing check valve is mainly used for the one-way flow of the medium, and only allowing the medium to flow in one direction to prevent accidents. Generally, this type of valves should be installed horizontally in the pipeline. Specification: Size: 1/2~24 Pressure Rating: Class150~2500LB Main Materials: WCB, WC6, WCC, LCB, CF8, CF8M, CF3, CF3M, 4A, LF2, F304, F316 etc. Design and Manufacture: BS 1868, ANSI B16.34 Face-to-Face:ASME B16.10, DIN3202 Pressure-temperature Ratings: ASME B16.34 Ends Connection: Flange, Butt Welding Inspection & Testing: API 598, EN12266 Feature: Bolted Bonnet - BB Swing Type, Anti-rotation Disc Renewable Seat Rings Non-penetrate Disc Shaft Horizontal or Vertical Service
check valves are mechanical device allowing fluid to flow through it in one direction. These valves have two ports or two openings. From one opening the fluid enters while from the other the fluid leaves. These valves have many applications.
Ball Check Valve Fig. No. CV48S Size: DN25-DN80 for Threaded End,DN40-DN600 for Flanged End Design Standard: EN12050-4 Face to Face: EN558 Series48 Threaded according to ISO228-1,BSPP Flange drilling according to EN1092-2 PN10,PN16, ISO 7005-2 PN10,PN16 Working Pressure: PN10.PN16 Hydralic Test according to EN12266-1, ISO5208 Material conform to EN-GJS500-7. Counterweight Control Lever for selection. Suitable for both horizontal and vertical installation
Fig. No. CV3202 â?¢Size: DN40-DN600 â?¢Design Standard: EN1074-1.3 â?¢Face to Face: DIN3202-F6 â?¢Flange drilling according to EN1092-2 PN10/PN16. â?¢Working Pressure: PN10, PN16. â?¢Hydralic Test according to EN12266-1, ISO5208 â?¢ Material conform to EN-GJL-250,EN-GJS500-7. â?¢ Counterweight Control Lever for selection. â?¢ Suitable for both horizontal and vertical installation * EN1074-1.3
Type: Flanged Duckbill Check Valve, Slip on Duckbill Check Valve Size: DN50-DN1800 Rubber Material: EPDM, NBR, NR, CR, CSM, FKM etc. End Connection: Slip on/Flange Flange/ Clamp material: Galvanized Steel, AISI304 or AISI316 Flange Drilling: EN1092 PN10, PN16; AS2129 Table D/ E, ANSI B16.10 Class 150# etc. Pressure: PN10, PN16 Curved Bill, flat bottom is also available For more detail information kindly come to worgocn dot com or contact us sales at worgocn dot com freely. -
Model 137-010 consists of Robocon Valve (BALEM 130) and Two Flow Control Valve. This valve is installed at outline of pump to prevent back flow caused by Back Pressure. This valve is slowly opening to prevent sudden opening surges, When a pressure reversal occurs the higher downstream pressure is applied to the cover chamber through the control tube line, and the valve closes drip tight.
We offer a extensive variety of valves & cocks known for perfect size, wear & tear resistance, which are extensively used for controlling the flow of various liquids. Used in industries like chemical, pharmaceutical and other similar industries, these are designed in various shapes and sizes to cater to various needs of our clients. Our bronze vertical check valve isi marked to is-778/1984 class-i, screwed female end bsp hydraulic pressure body tested - 1.5 mpa, seat - 1.0 mpa.
Cast check valve 1. Design & manufacture: api6d, ansi b16.34, bs1868 2. Bolted bonnet, swing type disc, 3. Size range: 2" to 24". 4. Pressure ratings: ansi 150, 300, 600, 900 , 1500 5. End connections: flanged, butt weld. 6. Materials: wcb, lcb, cf8, cf8m, cf3, cf3m, wc6, wc9, c5, c12 or equivalent, 7. Various trim materials available to suit service conditions 8. Nace mr 0175 on request Exporting standards case
Nominal pressure: pn1.6, 2.5, 4.0, 6.4mpa Strength testing seat testing pressure(low pressure): 0.6mpa Strength testing pressure: pt2.4, 3.8, 6.0, 9.6mpa Applicalbe temperature: -100~500.
