Composite Insulator for Sale Composite insulator is a special type of insulator composed of high-strength fiberglass rods and polyester resin impregnated materials. The advantage of this kind of insulator is that it has excellent high temperature resistance, corrosion resistance and anti-aging properties, which can effectively improve the safety and reliability of transmission lines. At the same time, composite insulators are light in weight, small in size, easy to install and maintain, and can effectively reduce the operating costs of transmission lines. In addition, the mechanical and electrical properties of composite insulators are superior to traditional porcelain insulators, which can effectively improve the safety and reliability of transmission lines. Features of Composite Insulator A composite insulator, also called a dielectric or nonconductor, is a material that resists the flow of electric current. This type of silicone rubber material is used in parts of electrical equipment intended to support or separate electrical conductors without passing current through itself. The term is also used more specifically to refer to insulating supports that attach electric power transmission wires to utility poles or pylons. Composite insulators are less costly, lighter in weight, and have excellent hydrophobic capability. This combination makes them ideal for service in polluted areas. However, these materials do not yet have the long-term proven service life of glass and porcelain.
1) Gloves Recommended Applications: Emergency services, laboratories, pharmaceutical and cosmetic industries, catering, cleaning, general industry. 2) Gloves Materials: 100% latex Rubber 3) Gloves Size:S-XL 4) Gloves Packing: 100 pieces will be packed into a dispenser box. The number contained in each dispenser box determined by physical count. 10 dispenser boxes are packed in 2 layers of 5 giving 10 dispenser boxes inside export quality shipper carton (outer). 5) Gloves Packaging specifications: For shipper carton Inner box size: 22*12*6cm carton (outer) size: 31*25*22cm 6) Gloves Storage Conditions: The gloves will maintain their properties when stored in dry conditions out of direct sunlight at between 10 to 30 degrees C. 7) Gloves Shelf Life: The gloves shall have a shelf life of 5 years from the date of manufacture when stored in compliance with the above storage conditions.
1) Gloves Recommended Applications: Emergency services, laboratories, pharmaceutical and cosmetic industries, catering, cleaning, general industry. 2) Gloves Materials: 100% latex Rubber 3) Gloves Size: S-XL 4) Gloves Packing: 100 pieces will be packed into a dispenser box. The number contained in each dispenser box determined by physical count. 10 dispenser boxes are packed in 2 layers of 5 giving 10 dispenser boxes inside export quality shipper carton (outer). 5) Gloves Packaging specifications: For shipper carton Inner box size: 22*12*6cm carton (outer) size: 31*25*22cm 6) Gloves Storage Conditions: The gloves will maintain their properties when stored in dry conditions out of direct sunlight at between 10 to 30 degrees C. 7) Gloves Shelf Life: The gloves shall have a shelf life of 5 years from the date of manufacture when stored in compliance with the above storage conditions.
Disposable powder free latex gloves which are made of Natural Rubber are the most flexible gloves among latex, nitrile and vinyl gloves. They are ambidextrous, durable, stretchable, tasteless, harmless, biodegradable, good elasticity, acid-resistant and alkali-resistant. To make the gloves more easier to don without using any of powder, gloves will be processed with chlorination, which makes powder free latex gloves more safer for medical operation, and reduces the latex allergy risks in a way. Today powder free latex gloves is being a trend, which is perfect for medical cleanroom environments that are sensitive and with high cleanliness. The general length of disposable powdered latex gloves is 9 inch. As colors, the regular one is beige and milky white. In size, XS to XXL is available. Pidegree provides powdered latex gloves of medical grade(AQL1.5), Food and Industrial Grade(AQL2.5), Industrial Grade(AQL4.0). Product Quality conforms to ASTM D3578 and EN455 Standards and our latex gloves are manufactured under QSR and ISO9001: 2008 Quality Management System. These gloves have 5 years' shelf life from the date of manufacturing and shall maintain their properties when stored in dry condition and avoid direct sunlight.
Disposable powdered latex gloves which are made of Natural Rubber are the most flexible gloves among latex, nitrile and vinyl gloves. They are ambidextrous,durable, stretchable, tasteless, harmless, biodegradable, good elasticity, acid-resistant and alkali-resistant. Due to the viscosity of the natural latex, to facilitate donning of gloves, powders have been used as lubricants to avoid bonding when the gloves are demoulded, namely powdered latex gloves. Powdered latex gloves are cost effective and easy to don, which are often used in examination, food processing and pharmaceuticals industry. The general length of disposable powdered latex gloves is 9 inch. As colors, the regular one is beige and milky white. In size, XS to XXL is available. Pidegree provides powdered latex gloves of medical grade(AQL1.5), Food and Industrial Grade(AQL2.5), Industrial Grade(AQL4.0). Product Quality conforms to ASTM D3578 and EN455 Standards and our latex gloves are manufactured under QSR and ISO9001: 2008 Quality Management System. These gloves have 5 years' shelf life from the date of manufacturing and shall maintain their properties when stored in dry condition and avoid direct sunlight.
White powder crashed from limestone, Calcium carbonate uncoated and coated. come indifferent grades and sizes 1. SUPER FINE CALCIUM CARBONATE AM50 2. SUPER FINE CALCIUM CARBONATE AM50s 3. SUPER FINE CALCIUM CARBONATE AM40 4. SUPER FINE CALCIUM CARBONATE AM30s 5. SUPER FINE CALCIUM CARBONATE AM30 6. SUPER FINE CALCIUM CARBONATE AM18m 7. SUPER FINE CALCIUM CARBONATE AM20m 8. SUPER FINE CALCIUM CARBONATE AM25m 9. SUPER FINE CALCIUM CARBONATE AM30m 10. SUPER FINE CALCIUM CARBONATE AM45m 11. SUPER FINE CALCIUM CARBONATE AM70m 12. SUPER FINE CALCIUM CARBONATE AM75m 13. SUPER FINE CALCIUM CARBONATE AM0.5m 14. SUPER FINE CALCIUM CARBONATE AM1.5m applicable in painting industry, PVC industry, cable. Most Common Applications Rubber industry. Plastics industry. Paints Industry. Paper Industry. Adhesives industry. Ink industry. Lime industry. Building materials industry. Carpet industry. Steel industry. Glass industry. Pharmaceutical and food industries. Animal feed industry. Fertilizers industry. Cement industry. the product comes in laminated woven bag 25kg
Model V180TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 820(603)/2,300 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 187 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,630
Model V180TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 650(478)/2,100 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 141 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,550
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 40hp/4500rpm (29.41kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 36hp/4500rpm (26.5kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 808 (49) Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 2 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 539 (33) Maximum output hp(kW)/rpm at crankshaft 18hp/4500rpm (13.2kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Garden swing Rud Antalya with mosquito net produced by LLC TH "Rud E.S." The swing seat, thanks to the "One-click" system, can easily be transformed into a sleeping place. The tilt of the awning is adjusted using special screws with a plastic handle located on both sides of the roof base. Mattress size: 500*1800 mm. - 2 pieces, sewn together. Mattress covers with a zipper for easy removal of the filling. Thickness: 80 mm foam rubber. Mattress fabric: Dralon* (Spain), awning fabric: Dralon* (Spain). DRALON is a trade name for polyacrylonitrile fiber (LAM) coated with Teflon. Fabrics made from DRALON fiber are very durable, even after many years of use they do not fade, and guarantee strength and durability. Thanks to the Teflon coating, the fabric is very easy to care for. The dirty surface is easy to clean; the Teflon coating lasts up to three washes. The fabric dries quickly. Base: reinforced structure pipe 57*1.5 mm, painted with polyethylene thermoplastic paint followed by polymerization in a painting booth, which guarantees excellent durability of the coating.
PVC Compound is Polyvinyl Chloride, which is one of the important and most accepted raw materials, used for making several end-products, including, footwear soles, bottles, pipes, films, rubber hoses, and other specific products. Its use in different manufacturing depends on the grade you are using, so be specific with your choice to get optimum results. This has a huge demand in several applications and TP Polymer Private Limited - one of the best PVC Compound Manufacturers in Delhi has been involved in catering to that huge demand and we specifically deal in PVC Footwear Compounds. Features: It is formulated using plasticizers and helps to make flexible materials. Have low thermal stability and a low carbon footprint. Pollution-free and can be recycled, which makes it an environment-friendly choice. Designed using high-quality lead-free chemicals that benefit the user's manufacturing process while keeping the environment protected. Very flexible and can be easily molded into different shapes as per the need. Resistant to chemical and environmental challenges. Very light in weight and can be converted into different forms. 100% solid and multi colors including, Natural, White, Foam, Transparent, etc. are available on demand.
Second Hand tyres,Used Motorcycle Tyres,Used Rubber Truck Tyre We can supply various kinds of car used tires (PCR tires), truck and bus tires (TBR and TBB), agricultural tire (AGR tires), bias and all steel radial, off road truck tire, tractor tires, Industrial tires (ID tires) SUV UHP Tires. Light car and truck tires (LT tires) snow and mud tires. Our company has large selections of Used Tires to offer you. We export internationally and locally. Our goal is to provide high quality Used Tires for: Used tires for Commercial Cars Used tires for Light Truck & SUV cars Used tires for Minivan cars Used tires for Smaller Cars Approximately 70% to 80% tread wear remaining. Type:All Seasons, Tubeless Type and Radial tire Design. Loading:550 tires-880 tires into 20ft container and 1500 tires-2500 tires into 40ft container depend on your selected tires sizes.
Tire Shredder Machines Tire shredder machines are powerful industrial tools designed to efficiently and effectively shred and recycle used tires. These tire shredder machines use a combination of blades and powerful motors to shred the tires into small, manageable pieces that can be used for a variety of purposes, such as fuel, playground surfaces, and rubberized asphalt. Tire shredder machines come in a range of sizes and capacities to suit various needs, from small-scale operations to large industrial facilities. They can be operated manually or with the help of computer-controlled systems, depending on the level of automation required. One of the main advantages of tire shredder machines are their ability to significantly reduce waste and pollution. By shredding and recycling used tires, these machines help to prevent the buildup of waste in landfills and reduce the need for new tire production, which can be resource-intensive and environmentally damaging. In addition to their environmental benefits, tire shredder can also provide economic benefits by creating new markets for recycled tire materials. These materials can be used in a variety of applications, such as construction, manufacturing, and energy production.
HSN Code : 29173940 Synonyms : Phthalic acid ester of Methanol, DMP CAS No. : 131-11-3 Molecular Formula : C10H10O4 Application : Di-Methyl Phthalate is a colourless, light-fast, clear oily liquid, slight sweet odour, soluble in all organic solvents . DMP is used in Lacquers, varnishes, Printing Inks, plastic, safety Glasses, Rubber Coating Agents, Moulding Powders, Insect Repellents and Pesticides. DMP dissolves many Nature Resins, Alkyd Resins, Glyceryl-Phthalate Rssin and may be used with� Coumarone Resins. DMP� is used manufacturing of Cellulose Aceteate Compound, Various types of Acetate Plastics. DMP� has an application as a Plasticizer, Solvent & Fragrance ingredient in a wide variety of cosmetic� Products. DMP is used in Hair-Care Products, including Aerosol Fixatives and other Cosmetic Preparations such as Eye shadows Wave Sets, Nail Polish, Remover, Nail Extenders, After- Shave Location & Skin Care Preparations. DMP is used in Veterinary Medicines as a Plasticizer in Film Coating, at of 0.1% or below. DMP is used as Solvent in Nitrocellulose, Cellulose Acetate, in Varnishes and Lacquers.
This Machine helps in cutting various materials into straps of different sizes. It has adjustable rings for different strap dimensions and uses round blades for precise, clean cuts. An essential tool for footwear, belt, bag and leather industries. Multipurpose Cutting: The Strap Cutting Machine is capable of cutting a wide range of materials, including leather, artificial leather, cloth, rubber, plastic plates, and paper. Adjustable Strap Width: The machine allows for easy adjustment of the strap width, enabling the cutting of different-sized straps according to specific requirements. This feature enhances its flexibility and adaptability. Round Blade: By utilizing round blades, the machine ensures precise and clean cuts, resulting in high-quality finished products. The round blade design is suitable for various materials and contributes to the overall accuracy of the cutting process. Nylon Roller for Blade Protection: The machine is equipped with a nylon roller that protects the sharpness of the blades. This roller minimizes wear and tear, ensuring the longevity and effectiveness of the cutting operation. Model No. BS-981 Power 220V 50Hz Motor Power 550 W Cut-Width 0-400 mm Outline Dimensions 655 x 345 x 245 mm Weight 114 kg
Iron Oxide Green 5605 Product Name: Compound Ferric Green 5605(Iron Oxide Green 5605) Color Index: Pigment Yellow42:77492, Pigment Blue15:3:74160 CAS No.: 51274-00-1,147-14-8 Molecular Formula: Fe2O3?H2O,C32H16N8Cu Molecular Weight: 177.7 Iron Oxide Green 5605 Product Name: Compound Ferric Green 5605(Iron Oxide Green 5605) Color Index: Pigment Yellow42:77492, Pigment Blue15:3:74160 CAS No.: 51274-00-1,147-14-8 Molecular Formula: Fe2O3?H2O,C32H16N8Cu Molecular Weight: 177.7 Iron Oxide Green Properties EMPEROR Iron Oxide Green 835 is a common iron oxide pigment used in developing building materials, paints, rubber, asphalt, sports racetracks, paper, plastic and others. Offering excellent light and temperature resistance, Iron Oxide Green 835 also offers strong color strength and good dispersion.
This machine is designed for slipper and shoe sole grinding is a versatile and efficient tool that ensures precise grinding of materials, with its horizontal grinding mechanism, this machine delivers consistent and uniform grinding results, enhancing the quality and finishing of slipper and shoe soles. Horizontal Grinding: The machine features a horizontal grinding mechanism, allowing for precise and uniform grinding of slipper and shoe soles. This ensures consistent results and improved the sole surface finishes. Versatile Application: Designed specifically for slipper and shoe sole grinding, this machine is suitable for various materials used in the footwear industry, such as rubber, EVA, and other sole materials. Easy to Use: The machine is equipped with user-friendly controls and intuitive features, making it easy to operate for both skilled workers and beginners. Its ergonomic design promotes efficiency and convenience during grinding operations. High Production Capacity: this machine enables efficient and timely completion of grinding tasks, contributing to increased productivity in slipper and shoe sole manufacturing. Model No. BS-707 Motor 2 HP Motor Speed 1400-2800 rpm Voltage 1.5 kw Dust Collector Motor 1.5 HP Dust Collector Motor Speed 2800 rpm Dimensions 1220 x 1065 x 760 mm