R290 or propane gas currently stands out for its wide range of applications in both the commercial and industrial fields. This gas has practically unbeatable properties in any of its applications, due to its GWP (Global Warming Potential) = 3 and an ODP (Ozone Depletion Potential) = 0. However, on the other hand, being a class A3 refrigerant, it is a non-toxic, but extremely flammable refrigerant. R290 has similar thermodynamic properties to R22, although certain characteristics such as capacity and working pressures are lower. Even so, it has excellent therm-physical properties and its thermal efficiency is good for most conditions, including high ambient temperatures, where the discharge temperature is low. Advantages â?¢ Natural, environmentally friendly and efficient refrigerant. R290 or propane gas is a natural refrigerant and has a low cost due to its abundance. In addition, it has high energy efficiency, thanks to its thermodynamic properties and high performance, which will lead to cost reduction. Climate adaptability. R290 gas has been shown to be better adapted to hot climates than HFCs. Performance. Their smaller displacement compressors further increase efficiency in industrial equipment, while also delivering high performance in commercial applications. Wide range of application. R290 refrigerant is fully suitable for both commercial and industrial equipment and systems. Good compatibility with other components. Reduced charge of R290 refrigerant. Obtaining a higher efficiency and performance than other refrigerants with only 40% charge. Long-term solution free of fluorinated refrigerants. This natural refrigerant is a safe bet for the long term, as it has no future environmental restrictions and is free of refrigerant taxation. Applications: â?¢ Commercial Refrigeration Systems. â?¢ Industrial Refrigeration Systems. Chiller Systems. Chill Cabinetry. Vending. Cold Storage. AC Systems. Heating Pumps.
Rubber strip 25 10 4000 Rubber strip 25X10X4880 Ventilation hood T515-1001.00 T515-1001.00 Oil level gauge assembly AH1001011400 AH33001-18.00 Seal gasket AH05010111 AH35001-12 Seal gasket AH08010111 AH34001-12 Seal gasket AH10010112 AH33001-15 Sealing washer AH10010116 AH36001-19 Seal gasket AH05010113 AH35001-15 Seal gasket AH10010116 AH36001-19 Seal gasket AH10010118 AH33001-25 Cylinder assembly AH050101050100 AH35001-05.01A.00 Cylinder assembly AH100101050100 AH33001-05.01A.00 Cylinder head flange AH0501010502 AH35001-05.02 Cylinder head flange AH1001010502 AH33001-05.02 Cylinder head AH0501010503 AH35001-05.03A Cylinder head AH1001010503 AH33001-05.03A Cylinder liner sealing ring AH0501010504 AH35001-05.04 Cylinder liner sealing ring AH1001010504 AH33001-05.04 Cylinder head plug AH050101050500 AH35001-05.05A Cylinder head plug AH100101050500 AH33001-05.05A O-ring 75 5.3 530301010750053000 GB3452.1-82 O-ring 97.5 3.55 530301010975035000 GB3452.1-82 Discharge line AH0501010507 AH35001-05.08 Discharge line AH0801010501 AH34001-05.01 Discharge line AH1001010507 AH33001-05.08 Bonnet seal ring AH0501010508 AH35001-05.09 Bonnet seal ring AH1001010508 AH33001-05.09 Valve cover AH0501010509 AH35001-05.11A Valve cover AH1001010509 AH33001-05.11A Stem guide (I) AH0501010510 AH35001-05.12 Stem guide (I) AH1001010510 AH33001-05.12 Spring guide AH100101051100 AH33001-05.13.00 Baffle AH0501010511 AH35001-05.13 Baffle AH1001010512 AH33001-05.14 Valve spring AH1001010529 AH00000101 AH33001-05.16A Valve assembly AH0000020500 AH35001-05.14A.00 Valve assembly AH0000020100 AH33001-05.17A.00 Lock nut T507-302.00 ( M24) Lock nut T507-305.00 (M39X3) Piston sealing ring 530301010280035000 (28X3.55)(GB3452.1-82) Piston seal ring AH1001010515 AH33001-05.20A Clamping assembly AH050101051500 AH35001-05.21.00
Product Name: Acai Powder Product Code: WH1001 Description: The acai berry is the fruit of the acai palm (Euterpe oleracea), native to the amazon, and has been consumed for centuries in popular recipes in the north of Brazil. This super fruit of purple color and remarkable flavor is rich in anthocyanins(a natural constituent with antioxidant activity), amino acids, essential fatty acids, fibers, proteins, and minerals (mainly calcium and potassium). This dehydrated ingredient is obtained from selected acai juice, and dried by atomization(Spray Dryer). Common Uses and Orientative Dosage: Food supplement 500.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Bordeaux Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Moisture Max. 5.00 g/100g Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Particle Size 0.42mm(40 mesh) Max. 5.00 g/100g Total Polyphenols Min. 0.30 g/100g CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Negative/g Escherichia Coli Negative/25g Yeasts and Molds Max. 1.000.000 UFC/g Salmonella Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Hurricane Window Screens Hurricane Window Screens also called impact storms screen. Hurricane window screens prevent vandalism, broken glass, energy savings, and storm protection. Hurricane window screens are very similar to insect screens, only stronger. They are manufactured with heavy-duty extruded aluminum frames and the screens are stainless steel wire mesh, powder coated black. From the outside, the screens resemble solar screens. From the inside of the house, the screen material is only slightly thicker than standard insect screens. They are also equipped with various locking mechanisms (which allow the screen to be opened) to meet emergency egress requirements. The hurricane window screens are very similar to common insect screens, but only much stronger and sturdier. They are manufactured with sstainless steel hurricane screens which is powder coat painted black. If you live in an area thatâ??s regularly at risk for Hurricane Damages, So hurricane screens will be your best choice. Security Purpose Stainless Steel Hurricane Proof Burglar Screen Using special enhanced security stainless steel insect screens with excellent durability and strong resistance to external impacts, it prevents people from falling and from external intrusion. Unlike traditional aluminum insect screens, it is corrosion-resistant, semi-permanent, and has a sturdy structure that is not easily damaged, providing you with a pleasant indoor atmosphere through adequate ventilation even in the hot summer months.
Product Description Specifications Quarter Package: PU with Revel IX Technology Elite-level stiffness and responsiveness for higher-end hockey IX Tech provides a more anatomical, performance-focused fit with the new injection construction process Flexible tendon guard, forward boot rake (or lean) and toe spring all help promote the ideal roller hockey stride Heat moldable for a custom fit and reduced break-in time Comfort Edge collar padding to alleviate ankle irritation Liner: Brushed Tricot for comfort, moisture-management and durability Tongue Construction: Two-piece, Vented Pro Felt Thick design protects the top of the foot from impacts and lace-bite Ventilated center to promote consistent airflow Outsole: Stiff TPR Plastic with Composite Overlay Delivers a perfect balance of lateral support and forgiveness Frame: One-Piece, Alkali Rize Aluminum Chassis Larger rear wheels with smaller front wheels increase agility without compromising top-end speed Fully extruded with 6000-series aluminum for optimal strength and less weight Sizes 1.0-3.0 /(2) 59mm in the front and (2) 68mm in the rear Sizes 4.0-5.0 /(2) 68mm in the front and (2) 72mm in the rear Sizes 6.0-13.0 /(2) 76mm in the front and (2) 80mm in the rear Alkali Square Flush Two-Piece 6mm Axles Wheels: Revel Xena 74A Indoor Wheels Bearings: Helo Swiss 608 Bearings Skate Width: D Weight: 1,346 grams (Size 9) Branch Office
Product Description Specifications Quarter Package: PU with Revel IX Technology Elite-level stiffness and responsiveness for higher-end hockey IX Tech provides a more anatomical, performance-focused fit with the new injection construction process Flexible tendon guard, forward boot rake (or lean) and toe spring all help promote the ideal roller hockey stride Heat moldable for a custom fit and reduced break-in time Comfort Edge collar padding to alleviate ankle irritation Liner: Brushed Tricot for comfort, moisture-management and durability Tongue Construction: Two-piece, Vented Pro Felt Thick design protects the top of the foot from impacts and lace-bite Ventilated center to promote consistent airflow Outsole: Stiff TPR Plastic with Composite Overlay Delivers a perfect balance of lateral support and forgiveness Frame: One-Piece, Alkali Rize Aluminum Chassis Larger rear wheels with smaller front wheels increase agility without compromising top-end speed Fully extruded with 6000-series aluminum for optimal strength and less weight Sizes 1.0-3.0 /(2) 59mm in the front and (2) 68mm in the rear Sizes 4.0-5.0 /(2) 68mm in the front and (2) 72mm in the rear Sizes 6.0-13.0 /(2) 76mm in the front and (2) 80mm in the rear Alkali Square Flush Two-Piece 6mm Axles Wheels: Konixx Tachyon (+0) Indoor Wheels U-base 3 Formula withTrac-tech, Infini-tech andVeloci-tech additives Specially designed hub and dinner core for optimum performance Revel Xena 74A Indoor Wheels Bearings: Helo Swiss 608 Bearings Skate Width:D Weight: 1,346 grams (Size 9)
Turmeric powder derived from the rhizomes of the Curcuma longa plant is widely recognized for its numerous health benefits Here is a description of turmeric powders benefits and its potential impact on health Its important to note that the bioavailability of curcumin is relatively low meaning that the body has difficulty absorbing it Pairing turmeric powder with black pepper or consuming it with fats or oils can enhance its absorption Additionally turmeric powder should be used as a supplement to a balanced diet and lifestyle and is not a substitute for medical treatment Consulting with a healthcare professional is recommended for specific health concerns or conditions Precautions needs to be taken while exporting Turmeric Moisture Important to dry the turmeric in hot sun and under expert supervision to zero down the chances of any fungus Cleaning Turmeric Raw fingers directly comes from farmers Need to do manual cleaning to remove foreign particles and then into the machine under experienced person Need to use JuteGunny bags for packing as it gives proper ventilation for turmeric fingerPreferable packing is 25 Kgs Jute bags Polishing has to be neat and avoid breaking of Fingers into pieces Fumigation needs to be done twice when raw material enters into godown and also when it packed and enters into containers Craft paper and Silica gel to be put into the container and keep third party quality specialist to inspect the container health Need to appoint reputed third party quality inspection agent to count the number of bags quality till the time the container is sealed
CareCoat The Ultimate Corrosion Defender! CareCoatis an innovative and highly effective corrosion inhibitor designed to protect metallic materials by providing a durable coating on their surfaces. This locally produced product is based on an internationally approved formulation and has undergone extensive research and testing to ensure its reliability and efficiency. CareCoat is a versatile solution used in various industries, with a primary focus on HVACR (Heating, Ventilation, Air Conditioning, and Refrigeration) systems. CareCoat is not just a product; it's your armor against the relentless forces of corrosion! Imagine a world where your valuable metallic equipment and structures remain unscathed, where maintenance costs plummet, and reliability soars. CareCoat brings this vision to life. Unleash the Power of CareCoat Superior Corrosion Protection: CareCoat forms an impenetrable shield, safeguarding your assets from a multitude of corrosive adversaries. Multi-Element Resistance: From salt spray to UV light, ammonia to bird droppings, CareCoat stands strong against them all. Application Made Easy: Whether you prefer spray, roller brush, or dip, CareCoat adapts to your methods with ease. Ready When You Are: Say goodbye to complicated preparations. CareCoat arrives ready-made, saving you precious time. Versatile Applications: Protect everything from AC units to boilers, pipes to fan blades - CareCoat has you covered. Long-Lasting Performance: With a shelf life of 2.5 years, CareCoat guarantees reliability over time. Safety First: Non-hazardous and easy to handle, CareCoat puts safety at the forefront. UV Resistance: Sun or rain, CareCoat's got you covered with unbeatable UV resistance. Minimal Heat Transfer Reduction: Maintain perfect heat conduction even with CareCoat in place. CareCoat is more than a product; it's your partner in preserving your investments. Its unbeatable quality and competitive pricing outshine imported alternatives. Say goodbye to corrosion-related headaches and embrace a world where your assets thrive. Extend the lifespan of your equipment, reduce maintenance hassles, and ensure unwavering performance, even in the harshest conditions. Choose CareCoat and fortify your future.
According to IEC60695-2-2, IEC60695-11-5 and GB/T-5169.5, ZY-3/ZY-3S needle flame test equipment is applied in the production and quality control department of lighting products, hyperpiesia electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, the apparatus is suitable for the industry of insulation material, engineering plastics and solid combustible material. Specifications: Angle of burner: 45 (when in test) / (when adjust the flame's height) Needle flame burning time: 0~999.9s±0.1s (adjustable, 30s in general) â?¢ After-flame time: 0~999.9s�±0.1s, auto record and pause manually â?¢ Height of flame: 12mm�±1mm (gauge is included) â?¢ Gas: 95% butane â?¢ Test range of temperature: 0~1000â?? â?¢ The temperature rises from 100â??�±2â?? to 700â??�±3â?? within 23.5 seconds�±1s â?¢ Thermocouple: �¦0.5mm K type â?¢ Applied with touch screen and remote control To save the delivery cost for the oversea market, LISUN designed a compact version needle flame test equipment weighing less than 50kg. (Customer need to prepare additional ventilation system for ZY-3S)
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods of Glow wire, basic testing methods of Glow wire device>, UL 746A, IEC829, DIN695 and VDE0471. What is glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. It uses high-temperature coating spraying on steel structure and imported instrument display, with easy operation and stable performance. The glow wire testing equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises. Specifications: Heating temperature: adjustable continuously within the range of 25~1100C, the accuracy of temperature is 1C, the resolution of temperature is ±3C Glow-wire time: 0.1-999.9s±0.1s(time range is adjustable) Ignition time: 0.1-999.9s, auto record, manual pause Flame-out time: 0.1-999.9s (auto record and manual pause) Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm Glow wire: 4 nickel (80) and chromium (20) Made in specific dimensions. Thermocouple: �?0.5 armored nickel & chromium/nickel-chromium wire, K Type. Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. To save the delivery cost for the oversea market, LISUN designed a compact version glow-wire tester weighing less than 50kg. (Customer need to prepare additional ventilation system for ZRS-3HS)
Chassis: The chassis is the framework of the auto rickshaw on which all other components are mounted. It provides structural integrity and support for the vehicle. Cabin: The cabin is the enclosed compartment where the driver and passengers sit. It is usually made of metal or fiber-reinforced plastic and may have windows, doors, and a roof. Roof: The roof provides shade and protection from rain and sun. It is often made of metal or fiberglass and can be detachable or fixed. Doors: Some auto rickshaws have doors to provide additional protection from the elements and improve security for passengers. Windshield and Windows: Auto rickshaws have windshields at the front to protect the driver from wind and debris. Windows can be found on the sides for ventilation and visibility. Lights: Auto rickshaws are equipped with headlights, taillights, turn signals, and brake lights for safe driving, especially at night. Bumpers: Bumpers are installed at the front and rear of the rickshaw to absorb impact in case of a collision and protect the vehicle's body. Suspension: Suspension components, such as shock absorbers and springs, help provide a smoother ride by absorbing road shocks and vibrations. Engine Compartment: This area houses the engine, transmission, and related components. It may have a hood or cover to protect the engine from dust and debris. Exhaust System: The exhaust system consists of a muffler and pipes that route exhaust gases away from the engine and reduce noise. Fenders: Fenders cover the wheel wells and help prevent road debris from being thrown onto the passengers and driver. Safety Features: Some modern auto rickshaws may come equipped with safety features like seatbelts, roll cages, and side impact protection. Advertising Panels: Many auto rickshaws have advertising panels on their exteriors to generate additional income for the owners. Dashboard: The dashboard houses the vehicle's controls, instruments, and gauges, allowing the driver to monitor the vehicle's performance.
Product Name:  BaisTec 9325G Application: BaisTEC 9325G is a versatile, versatile compound additive designed for efficient application For passenger cars, light diesel and four-stroke motorcycle engine oils. This "one" The "bulk" solution is ideal for companies producing different types of engine oil, so Production becomes easier! BaisTEC�® 9325G provides core requirements from API SG/ CD to API SL/CF/ CF-4. add The booster, BaisTEC 9325G can meet four-stroke motorcycle oil JASO MA or JASO MB performance requireme. Benefits: Versatile and versatile compound additive, which is perfectly balanced by a single compound agent Engine oil and diesel oil requirements. The use of appropriate reinforcing agents can meet the requirements of motorcycle oil. Meet a wide range of specifications from API SG/ CD to SL/ CF/ CF-4. Meet 10W-30, 10W-40, 15W-40, 20W-40 and 20W-50, etc Wide range of viscosity grades required. All data obtained from the engine test meets the requirements of the API license *(if applicable) Handling Information: Recommended storage and operating temperatures:40-45 C Maximum storage temperature:50 C Maximum allowable operating temperature:70 C Maximum mixing temperature:70 C Shelf Life: 24 months at ambient temperature Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Appearance Clear yellow liquid Active content, % 25 Water,% 5 Mineral oil,%
ENGINE: 4.0 L, 6-CYLINDER, PETROL, VVT-I MAX OUTPUT: 228 HP / 5200 RPM (170 KW) MAX TORQUE: 360 NM / 3800 RPM 5 SPEED MANUAL TRANSMISSION FRONT & REAR DIFFERENTIAL LOCK POWER SIDE VIEW MIRRORS, CHROME PLATED FRONT BENCH SEAT (3 PASSENGERS) MANUAL AIRCONDITIONING GLOVE BOX COOLING VENT SAHARA MIGHTY 79 CONVERSIONS DETAILS RKC FAB CUSTOM FRONT BUMPER WITH BULL BAR RKC FAB CUSTOM ROOF RAIL RKC FAB CUSTOM SNORKEL RKC FAB CUSTOM FENDER RAILS RKC FAB CUSTOM SIDE STEPS EVO CORSE RIM 17"0" H&R WHEEL SPACER CUSTOM EXHAUST TAILPIPE 2.5 KING SHOCK ADJUSTABLE TO 3" TO 5" KING STEERING STABILIZER TIRE: MILESTAR 315/17/17 DOBISON 3-INCH COIL FRONT DOBINSON LEAF SPRING DOBINSON FRONT AND REAR SWAY BAR DOBINSON ABS BRACKET SPACER KIT 70 SERIES DOBINSON U BOLT KIT DOBINSON POLYURETHANE BUSH KIT DOBINSON SHACKLE KIT AND SHACKLE PIN DOBINSON BRAKE EXTENSION PROPORTIONING VALVE ADJUSTER DOBINSON SWAY BAR EXTENSION RK ROBUST 12000LBS WINCH BYSON CELLULAR ANTENNA X 2 CUSTOM SEATS CUSTOM CUP HOLDER CUSTOM STEERING WHEEL ALUMINIUM CANOPY ALUMINIUM CANOPY TRAY X 1 3000W KISAE SMART INVERTER KISAE INVERTER CHARGE CONTROL PANEL DC-DC CHARGER WITH MPPT SOLAR 10-35V DC CRUISE LIGHT WIRELESS CONTROLLER 200AMP BATTERY BACK-UP 22OV WALL SOCKET WATER TANK 75LTR WITH AUTOMATED PUMP WATER GAUGE ARB TWIN COMPRESSOR CANOPY ROOF RACK SHOWER TENT ROOT TOP TENT REFRIGERATOR 48LTR DELONGHI DOLCE GUSTO COFFEE MACHINE RKC FAB CUSTOM DRAWER RKC FAB CUSTOM TIRE CARRIER RKC FAB CUSTOM PULL-OUT TABLE RKC FAB CUSTOM FOLDABLE LADDER RKC FAB CUSTOM EXTERNAL STORAGE RKC FAB CUSTOM TOOLS DRAWER RKC FAB CUSTOM ROOF & DOOR MOLLE PANEL SIBERIA DRC 50" STRANDS LIGHTBAR RLB ROCK LIGHTS SIBERIA MULTIPLE OPTIONS TAIL LED
Closed Circuit Cooling Tower Closed circuit cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides different shapes of cooling towers used in industries, such as round shape cooling towers and square cooling towers, but also offers closed cooling towers and open circuit cooling towers as well. The type of closed circuit cooling tower is widely used in iron and steel metallurgy, power electronics, machining, air conditioning system and other industries. How do closed circuit cooling towers work? Closed-circuit cooling towers make it possible to separate the evaporative circuit from the process circuit (customer circuit). A stainless-steel plate heat exchanger attached to the cooling tower, in its dedicated room, allows a glycol-free operation, and a simplified and unequalled ease of maintenance. The closed circuit cooling tower works as follows On the process side to be cooled (customer loop), the water to be cooled enters a plate heat exchanger connected to the tower and is cooled and discharged. The primary loop is closed and never comes into contact with air. On the secondary side of the cooling tower, the water is sucked out of the pool by a pump and circulated through a stainless steel plate heat exchanger. The water leaving the exchanger is piped to the top of the unit. This water is graded and evenly dispersed over the exchange surfaces by dispersers (also known as water distribution nozzles). Air driven by fans (axial or centrifugal) enters from the lower part of the cooling tower, is heated and saturated with water and exits from the upper part, passing between the exchange surfaces. Under the effect of the surface tension of the filler ladder, the water spreads uniformly and flows away over the entire height of the tower. The exchange surface is thus increased. The water cooled by forced ventilation falls freely into an inclined pool located at the bottom of the unit. Three reasons to choose a closed cooling tower No contamination in the primary circuit. Many civil and industrial processes require that process fluids be kept free from external environmental contamination: this is true, for example, of most food production processes. Closed-circuit cooling towers fulfil this need: in effect, the coils separate the process fluid from the ambient air drawn in by the fan, keeping it clean and contamination-free in a closed loop.
Product Name: Soda Ash Chemical Name: Sodium Carbonate Chemical Formula: Na2CO3 CAS Number: 497-19-8 Description: Soda Ash, also known as Sodium Carbonate, is a highly versatile and widely used industrial chemical. It appears as a white, odorless powder or granular material and is known for its alkalinity. Soda Ash is used in a variety of applications, including glass manufacturing, water treatment, detergents, and chemical production. Appearance: Soda Ash typically appears as a white, odorless powder or granular material. Key Features: High Alkalinity: Provides effective pH control and neutralization of acids. Versatility: Suitable for a wide range of industrial and domestic applications. Excellent Solubility: Easily dissolves in water to form a strongly alkaline solution. Efficient Cleaning Agent: Enhances cleaning power in detergents and cleaning products. Cost-Effective: Economical source of sodium ions and alkalinity for industrial processes. Applications: Glass Manufacturing: Key raw material in the production of glass. Enhances the workability and chemical properties of glass. Water Treatment: pH adjustment and water softening. Removes hardness and reduces acidity in water. Detergents and Cleaning Products: Boosts cleaning power in laundry detergents and household cleaners. Used in automatic dishwashing detergents. Chemical Production: Manufacture of sodium-based chemicals. Used in the production of sodium bicarbonate, sodium silicate, and other sodium compounds. Pulp and Paper Industry: Used in the pulping process and as a pH regulator. Metallurgy: Used in the smelting and refining of metals. Technical Specifications: Purity: 99.2% min Sodium Chloride (NaCl): 0.7% max Iron Content: 20 ppm max Moisture Content: 0.05% max Bulk Density: 0.95 - 1.05 g/cm�³ Packaging: Soda Ash is available in various packaging options to meet customer needs: 25 kg HDPE Bags with inner lining 50 kg HDPE Bags with inner lining 1000 kg Jumbo Bags Bulk packaging and customized packaging options available on request Storage and Handling: Store in a cool, dry, and well-ventilated area away from moisture and incompatible materials such as acids. Ensure containers are tightly closed when not in use. Handle with care using appropriate personal protective equipment (PPE) to avoid inhalation and contact with skin and eyes. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, OSHA, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures
Product Name: Caustic Soda Chemical Name: Sodium Hydroxide Chemical Formula: NaOH CAS Number: 1310-73-2 Description: Caustic Soda, also known as Sodium Hydroxide, is a highly versatile and widely used chemical with strong alkaline properties. It is commonly available in solid form (flakes, pearls, or pellets) and in aqueous solutions. Caustic Soda is essential in numerous industrial processes, including chemical manufacturing, water treatment, and cleaning applications. Appearance: Caustic Soda typically appears as white solid flakes, pellets, or a colorless solution. It is odorless and highly caustic, capable of causing severe chemical burns. Key Features: Strong Alkalinity: Highly effective in neutralizing acids and dissolving organic materials. Versatile Use: Widely used across various industries for its chemical reactivity and cleaning properties. Highly Soluble: Easily dissolves in water, forming a strongly alkaline solution. Efficient Cleaning Agent: Removes grease, oils, fats, and other organic materials efficiently. pH Adjustment: Commonly used for pH regulation in various processes. Applications: Chemical Manufacturing: Production of various chemicals including detergents, soaps, and synthetic fabrics. Manufacture of paper and pulp. Production of aluminum through the Bayer process. Water Treatment: pH adjustment and water purification. Removal of heavy metals and other contaminants. Textile Industry: Textile processing and dyeing. Mercerization of cotton. Cleaning and Detergents: Industrial cleaning agents. Household drain cleaners. Food Industry: Food processing and preparation. Used in peeling fruits and vegetables, processing cocoa and chocolate, and making caramel. Technical Specifications: Purity: 99% min Sodium Carbonate: 0.5% Sodium Chloride: 0.03% Iron Content: 20 ppm Appearance: White solid (flakes/pearls) or colorless solution Packaging: Caustic Soda is available in various packaging options to meet customer needs: 25 kg HDPE Bags with inner lining 50 kg HDPE Bags with inner lining 250 kg Drums Bulk packaging and customized packaging options available on request Storage and Handling: Store in a cool, dry, and well-ventilated area away from moisture and incompatible materials such as acids. Ensure containers are tightly closed when not in use. Handle with care using appropriate personal protective equipment (PPE) to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, OSHA, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Cross Flow Cooling Tower Cross flow cooling tower is an induced draft cooling tower that can cool water. Cross Flow Cooling Towers are a type of heat exchange system used in various industrial processes and HVAC (heating, ventilation, and air conditioning) systems to remove excess heat from the surroundings. These towers work on the principle of evaporative cooling, utilizing water and air to transfer heat from a process or a system.Cross flow cooling tower working: The water flows vertically from the top of the tower, and the air flows horizontally through the filler. The air flow is orthogonal to the water flow in the cooling tower. Advantage Compact Design: Cross Flow Cooling Towers have a more compact design compared to other types of cooling towers, making them suitable for installations with limited space or height constraints. Their vertical structure allows for efficient use of space. Energy Efficiency: These cooling towers typically consume less power due to their design and operation. The water distribution system and air movement mechanisms result in lower energy requirements, leading to reduced operational costs. Effective Water Distribution: The fill material inside Cross Flow Cooling Towers ensures even water distribution, maximizing the surface area available for heat exchange between water and air. This helps in achieving better cooling efficiency. Lower Noise Levels: Cross Flow Cooling Towers tend to produce less noise during operation compared to other types, which is advantageous when the cooling towers are located near residential areas or noise-sensitive environments. Easy Maintenance: The design simplicity of Cross Flow Cooling Towers makes them easier to maintain and clean. Access to internal components and fill material is typically more straightforward, simplifying maintenance tasks. Handling Varying Flow Rates: These cooling towers can handle varying water flow rates effectively, making them versatile and adaptable to changing process requirements or external conditions. Good Water Quality: The water exposed to air in the cooling process is less likely to get contaminated with debris, dust, or other impurities. This can help maintain better water quality and reduce the need for frequent water treatment. Improved Water Conservation: Cross Flow Cooling Towers can be designed with features like drift eliminators, which help minimize water loss due to evaporation. This contributes to water conservation efforts and reduces the overall water consumption of the cooling system. Suitable for Warm Climates: Cross Flow Cooling Towers are well-suited for warm climates because of their effective cooling capacity even when the surrounding air temperatures are relatively high.
Cross Flow Cooling Tower Cross flow cooling tower is an induced draft cooling tower that can cool water. Cross Flow Cooling Towers are a type of heat exchange system used in various industrial processes and HVAC (heating, ventilation, and air conditioning) systems to remove excess heat from the surroundings. These towers work on the principle of evaporative cooling, utilizing water and air to transfer heat from a process or a system.Cross flow cooling tower working: The water flows vertically from the top of the tower, and the air flows horizontally through the filler. The air flow is orthogonal to the water flow in the cooling tower. Advantage Compact Design: Cross Flow Cooling Towers have a more compact design compared to other types of cooling towers, making them suitable for installations with limited space or height constraints. Their vertical structure allows for efficient use of space. Energy Efficiency: These cooling towers typically consume less power due to their design and operation. The water distribution system and air movement mechanisms result in lower energy requirements, leading to reduced operational costs. Effective Water Distribution: The fill material inside Cross Flow Cooling Towers ensures even water distribution, maximizing the surface area available for heat exchange between water and air. This helps in achieving better cooling efficiency. Lower Noise Levels: Cross Flow Cooling Towers tend to produce less noise during operation compared to other types, which is advantageous when the cooling towers are located near residential areas or noise-sensitive environments. Easy Maintenance: The design simplicity of Cross Flow Cooling Towers makes them easier to maintain and clean. Access to internal components and fill material is typically more straightforward, simplifying maintenance tasks. Handling Varying Flow Rates: These cooling towers can handle varying water flow rates effectively, making them versatile and adaptable to changing process requirements or external conditions. Good Water Quality: The water exposed to air in the cooling process is less likely to get contaminated with debris, dust, or other impurities. This can help maintain better water quality and reduce the need for frequent water treatment. Improved Water Conservation: Cross Flow Cooling Towers can be designed with features like drift eliminators, which help minimize water loss due to evaporation. This contributes to water conservation efforts and reduces the overall water consumption of the cooling system. Suitable for Warm Climates: Cross Flow Cooling Towers are well-suited for warm climates because of their effective cooling capacity even when the surrounding air temperatures are relatively high.
India is renowned for its exceptional mangoes, and we are committed to providing you with the finest-quality mangoes that meet your expectations and satisfy the demands of your customers. We ensure a reliable supply of mangoes that are bursting with flavor, juiciness, and freshness, allowing you to incorporate the tropical essence of Indian mangoes into your product offerings. Mangoes are one of the most popular and highly sought-after fruits exported from India. Known for their juicy sweetness, rich flavor, and vibrant colors, Indian mangoes are a tropical delight enjoyed by people around the world. When describing mangoes for exporting from India, you can highlight their quality, variety, taste, nutritional value, shelf life, and potential uses. Here an expanded description Variety: India boasts a wide range of mango varieties, each with its own unique characteristics and flavors. Some popular varieties include Alphonso, Kesar, Totapuri, Banganapalli, and Dasheri. Each variety has its own distinct taste profile, color, and texture, providing a diverse range of options to cater to different preferences. Quality and Sourcing: We prioritize the quality of our mangoes throughout the sourcing and exporting process. Our mangoes are carefully selected from trusted orchards and farmers who follow sustainable agricultural practices. We ensure that our mangoes are of superior quality, free from blemishes or damage, and meet the highest standards of ripeness. Taste and Flavor: Indian mangoes are renowned for their unparalleled taste and flavor. They offer a perfect balance of sweetness and acidity, with a tropical, aromatic essence. The flesh is smooth, luscious, and succulent, melting in your mouth and leaving a delightful aftertaste. The flavor profile can range from tangy and citrusy to rich and honey-like, depending on the variety. Preparation and Culinary Uses: Mangoes offer endless culinary possibilities. They can be enjoyed fresh, sliced, or blended into smoothies, juices, or fruit salads. Mangoes are used in both sweet and savory dishes, including desserts, ice creams, chutneys, salsas, and curries. They can also be dried or preserved as mango pulp or pickles, extending their usability and flavor throughout the year. Shelf Life and Ripening: Mangoes are harvested at different stages of ripeness to cater to various market preferences. Some mangoes are exported when they are fully ripe and ready to eat, while others are exported while still slightly unripe to allow for longer shelf life and ripening at the destination. Proper storage in a cool, well-ventilated environment ensures that mangoes maintain their freshness and quality.
Product introduction: Crystal cat litter, it's a new technological material, artificial material. Water absorption is fine. Just clean up your cat's poop every day. This kind of cat litter donâ??t need often change, can use two weeks or so commonly in a basin, the defecate circumstance that sees cat cat specifically. If you watch the litter turn yellow, you can dump it all and replace it with a new one. Application: 1. Put one layer of silica gel cat litter,silica gel pet litter about 1.5 inches onto clean silica gel cat litter,silica gel pet litter box. 2. Clean garbage periodically to keep it clear. 3. If there are many cats, period can be changed: we suggest that one 3.8L silica gel cat litter bag be used for one month for a cat, about 15days for two cats and 10days for three. 4. It should be cleaned timely if it has fully absorbed moisture. 5. How to prolong applicable period of silica gel cat litter: 1)For application, it should be put into ventilated and dry place. 2)put at dry place if it has not been used,keep sealed. Max Pet, as unscented-mini crystal cat litter factory, vendor, has a large number of crystal cat litters on sale at special prices. Specifications: Product Name Crystal cat litter sand Use Cat Material Silica gel Size 1-6MM 1-8MM or as customers' reques Color White + 3%color (pink, yellow, green, purple, blue, red, etc) Fragrance Strawberry, lemon, apple, lavender, sea fresh, orange,etc. Adsorption capacity 98% Sample Cost Stock sample available for free. Inner Packing 3.8L,5L, 7.2L,8L,10L,15kg or 20kg compound bag or as requested Product Name Crystal cat litter sand Use Cat Material Silica gel Size 1-6MM 1-8MM or as customers' reques Color White + 3%color (pink, yellow, green, purple, blue, red, etc) Fragrance Strawberry, lemon, apple, lavender, sea fresh, orange,etc. Adsorption capacity 98% Sample Cost Stock sample available for free. Inner Packing 3.8L,5L, 7.2L,8L,10L,15kg or 20kg compound bag or as requested
