Specification of Kitagawa detector tubes/Kitagawa tube detector 120SB Tube No.: 120SB Gas to be measured: Hydrogen sulphide(H2S) Measuring Range: 1-150ppm Shelf life: 3 years (after production) We have more than 300 types of tube, for other tubes and specification details, please contact us . Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customerâ??s exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
Specification of Gastec Gas Detection System Detector Tubes/gastec stain tubes 1DL Tube No.: 1DL Gas to be measured: Carbon monoxide (CO) Measuring Range: 0.4-400ppm Shelf life: 3 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Specification of Kitagawa detector tubes/Kitagawa stain tubes 120SD Tube No.: 120SD Gas to be measured: Hydrogen sulphide(H2S) Measuring Range: 1-60ppm Shelf life: 3 years (after production) We have more than 300 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customerâ??s exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
Specification of Gastec Gas Detection System Detector Tubes/gastec colorimetric tubes 7LA Tube No.: 7LA Gas to be measured: Phosphine(PH3) Measuring Range: 0.05-9.8ppm Shelf life: 2 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Applications 1) 1064nm: for treatment of tattoo removal, dermal pigmentation and treating certain pigmentary conditions such as Nevus of Ota and Hori is Nevus. (mainly for black and blue pigmentation) 2) 532nm: for treatment of epidermal pigmentation such as freckles, solar lentigo, epidermal melasma, etc.(mainly for red and brown pigmentation) 3) Black Carbon Head(NALR-1320nm): For deep cleaning, skin whitening, skin rejuvenation, shrink pores, acne treatment, wrinkle removal etc. Working Principle The special wavelength of YAG laser can penetrate skin of human body according to the theory and practice of "selective laser decomposing", the instrument uses the laser-wave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling. The Q-switched Nd:YAG laser radiates the light with a specific wavelength in high peak energy pulse; hence the light penetrates the tissue only for an ultra-short nanosecond. The light is absorbed by the pigment tissue and results in an instantaneous blast, that is Light blasting principle. The pigment particles are shattered into fragments, parts of them will be bounced out of the skin and other parts will be split into tiny particles that can be engulfed by phagocytes and then metabolized by the lymphatic system. The 1064nm wavelength will shatters and removes the black and blue pigments while the 532nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normal tissue. Specialty of QM-Q1 1.New Medical and Elegant design 2. Ergonomic design handle, super long lifespan which can reach 2 millions shots ! 3. 3 Laser tips: 532nm, 1064nm, 1320nm can meet different pigments and black doll treatments
Railways R50/R60/R65 Specifications 1. SPECIFICATIONS OF RAILWAYS: R50/R60/R65: SECOND QUALITY-RAILWAY RAIL STEEL NO. 1. STANDARD SECTION TEE RAILS, ORIGINAL WEIGHT 50 POUNDS PER YARD, OVER HEAVIER, 120.50 M RAILS. STEEL NO. 2. CROPPED RAIL ENDS, STANDARD SECTION, ORIGINAL WEIGHT 50 POUND PER YARD AND OVER 12.50 METERS LONG. 28)B) (28C) RAIL STEEL NO.2 T RAIL ENDS STANDARD SECTION ORIGINAL WEIGHT 50 POUNDS PER YARD AND OVER 12.50 POUNDS PER YARD AND OVER 12.50 METERS RAIL, STEEL NO.3, STANDARD SECTION FEE, GENDER, AND / OR GUARD RAILS, FREE FROM FROG AND SWITCH RAILS NOT CUT APART, AND CONTAIN NO MANGANESE, CAST, WELDS OR ATTACHMENT ANY KIND EXCEPT ANGLE BARS ALSO RAILS, NOT FOUND AND WITHOUT RADIATION AND EXPLOSIVE SUBSTANCE�¢?�¦ 1.0M ( 1.0 1.5M( RAIL FERROUS (R 50/ R65 ) CHEMICAL COMPOSITION SHALL BE ACCORDING TO Chemical Composition R65 GOST 8165.75 WEIGHT 64.72 KG /METER C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX P = 0.035% AS - 0.01 MIX OF MASS SHARE R50 GOST 7173.75 WEIGHT 51.67 KG /METER C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX P = 0.035% AS - 0.01 MIX OF MASS SHARE Country of Origin SAUDI ARABIA
Product Introduction: Rectifier for gravure cylinder machinery Used in conjunction with rotogravure electroplating tanks. It has the functions of steady current, steady voltage, low ripple and soft start. Specifically for engravured cylinder making and printing industry Product Advantage: 1.Small size, light weight, high efficiency and high control precision. 2.Introduced international pulse-duration modulation technology, uses the IGBT power module from internationally-known company; 3.Enhance cathodic current density, With strong penetrability and adhesion, it can significantly quicken deposition rate of the plating coat, reduce the internal stress of coating , eliminates the hydrogen embrittlement, coating crystallizes will be more smooth and bright. 4.It has the constant voltage, constant current operating mode and The self-protection function of over current ,short circuit, overheating , phase lack ,etc .Also soft start function; 5.The case uses spray process ,The control system is sealed and isolated ,the internal structure adopts design of the resistant alkali and acid .Greatly increases the product service life ; 6.Standard antiseptic remote control box, Separate the power from plating tank, increases the product service life ; 7.We can provide 1)The digital timer alarm system; 2)Ampere-hour meter; 3)RS485 or CAN standard interface 4)4-20MA,0-5V,0-10V control signal interface ,etc.(The signal interface can be customized )
Hydrogen Oxygen Machine is electrolyzing water to produce a mixture of hydrogen and oxygen. Ignite the gas in the flame torch nozzle and utilize the clean, still, concentrated flame for micro-welding, brazing, melting, automotive engine carbon cleaning, and more. Parameters Model number :F13 Hydrogen-oxygen flow rate:2.2L/min Oxygenation flow rate 1-4L/min Maximum water volume :1.6L Electrolyte concentration :3% Operating pressure :0-0.03bar Power input :AC110V/220V Package size :33*33*44cm Weight :8KG Configuration: 1.Digital large screen display - intuitive operation. 2.Water shortage alarm - protect the electrolyzer and prolong the life of the machine. 3.Timing function-accurately control the running time. 4.Oxygen boosting function--Increase the gas output of the machine, the increment is adjustable. 5.Post-filter-Recover the water in the system to make the gas pure. 6.Pre-filter-Improve the purity of gas, make the gas more pure. Applications: Polishing uneven and hard-to-reach area of acrylic products and acrylic parts without any residue, such as acrylic sheets, signs and acrylic lettering Welding metal wires, especially enameled copper wires in electric motors and transformers Melting and fusing of gold, silver, platinum, and their spots and face welding sealing small quartz glass bottles and ampules Spot annealing of small parts in all metals Welding, cutting and drilling of very thin metals Welding copper tubes Car engine carbon cleaning Brand:HONGUANG If interested, please contact us
Atmospheric Plasma Cleaning System chain conveyor Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Product advantages: 1. Significantly improve surface hydrophilicity and enhance bonding 2. Remove surface oil, fingerprints and other organic contamination horizontally, 3. Board walking speed 2~5 meters/minute 4. Double-sided processing is possible, and equipment can be customized according to production capacity 5. Processing under atmospheric pressure, no special gas is required, and installation and use are simple Product Specifications: 1 Dimensions L*W*H:1200*1150*1150 - 1500mm 2 Power supply Single-phase 220V, 50/60HZ, 12A 3 Conveying method Roller conveyor, chain conveyor, belt conveyor 4 Working environment Temperature: -10~40, relative humidity: 50%~93% (non-condensing) 5 Plasma generator 500-700W adjustable; optional 700-1200W (high power version) High power version is suitable for 50mm and 70mm spray guns @25-40KHz 6 Working gas Water-free and oil-free compressed air; optional argon, nitrogen, etc. 7 Effective processing Width 500mm, double-sided processing (optional), the number of rotating nozzles is optional 8 Rotating spray gun Processing width diameter: 50mm, optional 70, 30, 20mm 9 Support plate thickness < 3mm (special specifications of thick plates require special customization of the equipment) 10 Processing speed 2.0m/min ~ 5.0m/min 11 Cooling method Air cooling, factory exhaust > 400m3/h 12 Control system PLC+HMI
VGA To SDI Converter The RV707 is a VGA to SD-SDI/HD-SDI/3G-SDI converter, achieves conversion from VGA to SDI without signal damage and delay, and embedded the outer VGA audio into SDI signal, to achieve audio and video transmission simultaneously. The RV707 achieves excellent video and audio quality with low power consumption. VGA To SDI Converter The RV707 is a VGA to SD-SDI/HD-SDI/3G-SDI converter, achieves conversion from VGA to SDI without signal damage and delay, and embedded the outer VGA audio into SDI signal, to achieve audio and video transmission simultaneously. The RV707 achieves excellent video and audio quality with low power consumption. Features Features 1 VGA input, 2 audio inputs and 1 SDI output Comply with SMPTE-424M, SMPTE-292M and SMPTE-259M standard, supports 2.97Gb/s, 1.485Gb/s and 270Mb/s 1080P@60,50,30,25,24,1080I@60,50 and 720P@60,50,30,25,24, SD 525i and SD 625i Supports asymmetrical conversion for any format The input and output video format can be shown on the screen Embedded ESD protection circuit to prevent damage from static +12V DC power input Application TV live broadcast High-definition video conference and monitoring Intelligent transportation system(ITS) and public security system High-definition Multimedia Information Distributing System in subway or train station
We are looking for buyers for silicon ingot scrap for semiconductor applications. Product Overview Product types: Top & Tail, side pieces, ingot scraps, etc. Ingot size: 12 inch and 8 inch are the mainstream, 6 inch is a little Stock amount: Over 100 tons Product raw material: Ingot for semiconductor use (11N product) Mainly CZ products, small amount of FZ products Product characteristics Doped: Basically phosphorus and boron N type & P type (both available) Resistance value: 1 or more, 5 or more (separate storage) Carbon content: As it is 11N product, the carbon content is in PPM units. All products are inspected (N type/P type, resistance value, visual inspection) Sales method: Approximately 25 tons delivered by container MOQ: 25 tons/month, 1 year continuous contract (Spot trading is also possible, but the unit price will change.) Payment method: 100% advance payment Delivery method: EXW or delivery to a designated port (additional cost required) Unit price: 7USD/kg Submission of quality inspection certificate: Inspection certificate as evidence of the shipped product Documents to be submitted: Shipping judgment slip (X-ray fluorescence analysis data attached) / for each shipment Judgment items:Â Visual check ... No foreign matter, oil, or moisture (excluding identification stickers, fixing tapes, crystal orientation markings, etc.) Weight check ... Matches the slip (within +3kg/-0% per package) Component analysis ... No detection of P (phosphorus) (N.D.) Analysis method: Randomly sample samples from each shipping lot and perform qualitative analysis using X-ray fluorescence. Quantitative analysis is performed on lots that detect P (phosphorus) spectrum during sampling inspection. Basically, it can be exported to the whole world except for some regions. This product is a semiconductor-level crystal, so it is a product for 100% remelting. When purchasing, you must agree to the pledge.
Radio-Frequency Plasma System AS-V100 Merits: Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Application fields: Suitable for PCBs,FPC IC substrates, LCDs, PV batteries, semiconductors, PTFE, automotive interior parts, medical equipment, plastic and rubber products. Product Specifications: 1.Outline Dimensions (footprint):1200*800*1750H mm 2.Vacuum chamber size:450*450*610mm 3.Power frequency:13.56MHz 4.Power supply:1Kw 5.Electrode plate specifications: Non-standard customization 6.Software control: PLC touch screen 7.Gas purity requirement: Industrial grade gas or better 8.Loadable gas:O2 N2 Ar Features & Performance: 1.User-friendly automatic control interface with a touch screen for easy operation. 2.Unique cavity design ensures excellent cleaning uniformity and high cleaning quality. 3.Utilizes a two-layer structure with 4-6 material boxes per layer, combining chemical reactivity and physical impact for a short cleaning cycle and high efficiency. 4.Plasma cleaning offers high repeatability, strong controllability, high utilization rate, and operates with no pollution and low operating costs. 5.Features a simple structure, compact footprint, high efficiency, easy operation and maintenance, fast speed, and stable performance. 6.Enhances the surface wetting ability of the lead frame or substrate before D/A, ensuring precision and firmness in subsequent processes.
Unsweetened Desiccated Coconut. PHYSICAL CHARACTERISTICS: Appereaance and Color : White, free from yellow specs or other discolorations. Flavour/Odour : Mild and sweet characteristic of coconut, free foreign flavours and odours. Size : Fine granular of coconut. Impurities : Not more than 4 dark specs per 100 grams. Granulation mesh 7 : 0% mesh 14 : 5 - 23 %. mesh 18 : 30 - 55 %. pan : 33 - 65 %. CHEMICAL CHARACTERISTICS: MOISTURE : 3.0 % maximum TOTAL FAT : 50 + 5 % (d.w.b) FREE FATTY ACID : 0.10 % maximum (as lauric acid) pH (10% dispersion) : Min 6.0 HEAVY METAL: Pb : 0.1 mg/kg maximum Cd : 0.1 mg/kg maximum Hg : 0.03 mg/kg maximum As : 0.1 mg/kg maximum MICROBIOLOGICAL: Standard Plate Count : 5.000 cfu/gram maximum. Yeast : 50 cfu/gram maximum. Mould : 50 cfu/gram maximum. Caliform : 100 MPN/gram maximum. E. Coli (Type 1) : Negative/1 gram. Salmonella : Negative/25 gram. Staphylococcus aureus : 10 cfu/gram maximum. PACKAGING: Standard Packing 25 Kgs nett weight in multiwall kraft paper bag with inner polyliner, weight 24,88 - 25,13 Kg. Each delivery identified by marking the grade of DC, Lot Number, Production Code, Self Life, Handling, and Supplier.
Product Name: Extra Virgin Olive Oil Discover the exceptional quality of our Extra Virgin Olive Oil, perfect for culinary professionals and food industry businesses. Sourced from the finest olive groves, our oil is meticulously crafted to deliver unparalleled flavor and health benefits. Key Features: Premium Quality: Cold-pressed from handpicked olives, ensuring the highest standards of purity and taste. Rich Flavor Profile: A harmonious blend of fruity, peppery, and grassy notes, ideal for enhancing a variety of dishes. Nutrient-Rich: Packed with antioxidants and healthy monounsaturated fats, promoting overall well-being. Versatile Uses: Perfect for dressings, marinades, cooking, and as a finishing oil to elevate gourmet creations. Sustainable Practices: Produced using environmentally friendly methods, supporting sustainable agriculture. Specifications: Origin: Italy Packaging: Available in bulk or bottled options (e.g., 500ml, 1L, 5L) Certifications: Organic, Non-GMO, ISO certified Shelf Life: 18 months Trade Details: Minimum Order Quantity (MOQ): 1 ton Trade Term: FOB Payment Term: T/T Delivery Time: 1- 2 weeks Destination Port: To be determined Why Choose Our Extra Virgin Olive Oil? Superior Quality: Guaranteed consistency and excellence in every batch. Competitive Pricing: Attractive rates for bulk purchases. Reliable Supply: Steady availability to meet your business needs. Excellent Customer Service: Dedicated support to ensure a smooth transaction process. Elevate your product offerings with our exquisite Extra Virgin Olive Oil. Contact us today to place your order or request a sample.
Product Description Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail . This instrument has the features of high measuring precision, convenient calibration, simple structure, light weight and easy to carry. Reasonable switch rail height can not only ensure train running safely and smoothly, but also reduce the interaction between wheel and rail effectively,reduce the dynamic stress of track structure, keep the track in good geometric state, thus reduce the maintenance workload FEATURE 1. Smart and Portable The size of the horizontal rod is about 300mm, and the vertical rod is about 250mm. The ruler body is smart and portable. 2. LCD Digital display, easy to read. 3. High Accuracy The measurement accuracy can reaches 0.01mm.The measurement results can be display instantly 4. Multifuncional, Wide range of application . It can measure five items to meet different requirements: 1) The descent height value of the switch rail 2) The descent height value of the point rail 3) The height of check rail 4) The height of switch roller 5. This device is equipped with a simple calibrator ,could be used for quick calibration before each use 6. The measure head could be moved from side to side,suitable for all kinds distance tracks. Measure head could move range is 60mm,could be used for measuring different distance switch rail and point rail. 7. Replaceable measuring probe, suitable for different usage When measuring the height of the switch rail and point rail relative running rail, using the flat measuring probe; When measuring the rail surface dent, using the sharp measuring probe. 8. Metric /Imperial unit Specification Model LJ-JGJD-I Type Switch Rail Gauge Material Stainless Steel Dimensions (L x W x H) (mm) 270*22*180mm Measure range -5~30mm Accuracy 0.05mm Resolution 0.01mm Working humidity 93%RH Size 270*22*180mm Weight 0.45kg Power Button battery(1.5V)
Dear Buyer I hope youre well Below are the details and prices of our charcoal products 1 Supplier Elmostashar Products Vegetative Charcoal Mineral Charcoal and Others Specifications Moisture 515 Ash 110 Volatile Matter 2045 Fixed Carbon 6090 Calorific Value 70008000 kcalkg Sulfur 1 Features and Uses Primary source of energy for grilling shisha and heating Used in industrial processes like metal refining Company Advantages Highest quality compliant with international standards Extensive experience in the industry Excellent customer service Price BBQ Charcoal Premium 650ton Medium 600ton 2 Product Square HookahShisha Charcoal Specifications Shape Square Dimensions 25 cm 25 cm Moisture Content 110 Features and Uses Designed for shishahookah use Provides consistent heat and longer burning time Company Advantages Highest quality adhering to international standards Years of industry experience Price HookahShisha Charcoal Premium 650ton Medium A 600ton Medium B 550ton 3 Hexagonal Charcoal Specifications Hexagonal shape 20 cm 5 cm 5 cm 22 cm Stick type 5 cm 22 cm 8 cm 25 cm Heat capacity At least 7500 calories Moisture content 110 Price Premium 550ton Medium 500ton This Egyptian charcoal from Upper Egypt is renowned for its strength durability and minimal emissions ensuring a clean and efficient burn lasting at least 8 hours Looking forward to discussing further details with you
100% New Original DX2 Color Print Head F055090/F055110 For Epson For Roland Color Solvent Base Dx2 Print Head Made In Japan Product Description 1.printer head model :F055090/F055110 2.100% new and original 3.Original DX2 Solvent Colour 4.Description---original and solvent, made in Japan, with ID/serial number Compatibility printer model: Brand Modes For Epson For EPSON Color-1520K/3000,7000/9000/9500 For Roland FJ-50 / FJ-52 / CJ-500 / SC-500 / SJ-500 / SJ-600 For Mimaki JV2-130 / JV2-90 / TX1 For Mutoh Rockhopper 48 (Falcon Outdoor) / Rockhopper 62 (Falcon Outdoor) / Rockhopper 38 (Falcon Jr) / RJ-800 / RJ-4000 (Falcon) / RJ-4100 (Falcon) / RJ-4100P (Falcon Plus) / RJ-6100-46 (Falcon) / RJ-6100-54 (Falcon) / RJ-6100-62 (Falcon) / RJ-6100-46+ (Falcon Plus) / RJ-6100-54+ (Falcon Plus) / RJ-6100-62+ (Falcon Plus) / RJ-6000-43 (Falcon) / RJ-6000-54 (Falcon) / RJ-6000-62 (Falcon) MOQ 1piece Delivery time about 2 working days after confirmed your payment Payment Item T/T, Bank Transfer Certification ISO9001,14001,SGS Feature 1. Original products quality . 2. With original package . 3. Direclty from the original factory 4.More discount if quantity big . 5.Precise ink filling amount, ensure print pages. 6. Widely used in all kinds of printing medium
Size:600*600mm Resflor Introduction of Products     Calcium sulphate raised floor panel make the environment friendly plant's fibre as the reinforcement material, and then solidify the calcium sulphate crystals, and after the pulse pressing process done. It's wildly used in the raw material of the raised flooring,because the good furthers in environment friendly, fireproof, high loading capacity and flatness and so on. Characteristics     1.Strong wearability, nIntroduction of Products     Prefer aluminum as base material. Die casting by large oil press,imported strong glue paste HPL or PVC, pedestal/stringer are pressured forming with steel, lead screw could adjust height, Characteristics. Characteristics     1.This is best base material/optimal conductor in antistatic floor, can give off the static into ground by earthling system in a very short time.     2.Fireproof, soundproof, dustproof, antisoil, resistance to chemical attack, electromagnetic shielding.     3.Pressurization, super strength loading,1.5T for each square.     4.High grade and environmental protection, recycled, no devaluate Range of application; bank and high grade office, clean room and other occasions which require higher loading and material.on-bubble, no degumming     2.Strong design ability, pressurization, good loading capacity;     3.Appearance is beautiful;     4.Easy to fix, convenient for wires.
EverFlon ®PTFE Dispersion Fine Powder F500 is a soft white polymer made from a water-based dispersion of PTFE. These fine powders have the lowest coefficient of friction, highest heat resistance, chemical resistance, electrical properties and non-stick properties of all fluoropolymers. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. EverFlon ®PTFE F500 is designed for machining at medium and high pressure rates from 100:1 to 600:1. It is particularly suitable for the production of high quality tubes, spiral tubes and wire coatings. This grade is also well suited for post-processing techniques such as flanging, welding, blow molding and turning. Processing suggestion EverFlon ®PTFE F500 is extruded using liquid processing AIDS such as naphtha. During the paste extrusion process, the powder is mixed with a lubricating agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical pre-formed bad material. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through a finishing die under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F500 is usually processed under heat in a step-by-step process into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°(648°F) and produce a non-porous solid PTFE resin.
Fluoron PTFE fine powder F100 is a soft, white polymer made from an aqueous dispersion of PTFE. These fine powders have the lowest friction coefficient of all fluoropolymers and the highest heat resistance, chemical resistance, electrical properties and non-stick properties. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. Fluoron PTFE F100 is designed for machining with low compression ratios of 10:1 to 300:1. It aims to promote the production of high-quality, low-density tapes Processing suggestion PTFE F100 is extruded using liquid processing AIDS, such as naphtha. During the paste extrusion process, the powder is mixed with a lubrication agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical preformed blank. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through the finishing mold under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F100 is usually further processed under heat into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.
