Oxidized polyethylene waxis made from polyethylene wax after special oxidation process. The molecular chain has certain functional groups, so its miscibility with polar resin has been significantly improved. Due to a certain amount of carbonyl and hydroxyl groups in the molecular chain of oxidized polyethylene wax, the compatibility with fillers, pigments and polar resins is significantly improved. The wettability and dispersibility in polar system are better than that of polyethylene wax, and it also has coupling property. Due to its high melting point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, plays the role of internal and external lubrication, and has good antistatic property. In the plastic processing industry, the internal and external lubrication of PVC is relatively balanced. The lubricity of oxidized polyethylene wax added to the rigid, transparent and opaque PVC formula is better than that of other lubricants. It can also be used as raw and auxiliary materials for textile softener, car wax and leather softener. It can be used as dispersant, lubricant, brightener and coupling agent of pigment or filler such as dense masterbatch, polypropylene masterbatch, additive masterbatch and filling masterbatch. Rubber and plastic processing lubricants, film removers and phase solvents. In the formulation of waterborne coatings and inks, it provides excellent wear resistance, adhesion resistance and scratch resistance At present, oxidized polyethylene wax is widely used in PVC foam board, but it is less used in other aspects due to price reasons. PVC foam board is the most difficult to produce in PVC products, which has the most problems and is the most difficult to solve. The plasticization can be significantly accelerated after adding oxidized polyethylene wax. Here we can see the uniqueness of oxidized polyethylene wax.
Product Name: Linear Alkyl Benzene Sulfonic Acid (LABSA) 96% Chemical Formula: C18H30SO3 CAS Number: 27176-87-0 Description: Linear Alkyl Benzene Sulfonic Acid (LABSA) 96% is a high-quality anionic surfactant predominantly used in the formulation of detergents and cleaning products. Derived from linear alkylbenzene, LABSA 96% ensures superior performance in a wide range of applications due to its excellent detergency, emulsification, and foaming properties. Appearance: LABSA 96% typically appears as a dark brown, viscous liquid with a pungent odor. It is highly soluble in water, forming a stable solution. Key Features: High Detergency: Effectively removes dirt, grease, and stains from various surfaces. Excellent Foaming: Produces rich and stable foam, enhancing the cleaning efficiency. Good Emulsifying Properties: Assists in the dispersion of oils and fats. Versatile: Suitable for numerous cleaning and detergent formulations. Cost-Effective: Provides high performance at an economical cost. Applications: Household Cleaning Products: Laundry Detergents Dishwashing Liquids All-purpose Cleaners Industrial Cleaners: Engine Degreasers Heavy-duty Detergents Industrial Floor Cleaners Personal Care Products: Shampoos Hand Washes Technical Specifications: Active Matter: 96% min Color (Klett): â?¤ 50 Free Oil: â?¤ 2.0% Sulfuric Acid: â?¤ 1.5% Water Content: â?¤ 1.0% Packaging: LABSA 96% is available in various packaging options to suit customer requirements: 220 kg HDPE Drums 1050 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Product Name: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% Chemical Formula: C18H30SO3 CAS Number: 27176-87-0 Description: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% is a high-quality anionic surfactant primarily used in the formulation of detergents and cleaning products. It is derived from linear alkylbenzene, ensuring excellent performance in various applications due to its strong detergency, emulsification, and foaming properties. Appearance: LABSA 90% typically appears as a dark brown, viscous liquid. It has a pungent odor and is soluble in water, forming a stable solution. Key Features: High Detergency: Efficiently removes dirt, grease, and stains from surfaces. Excellent Foaming: Generates rich and stable foam, enhancing cleaning efficiency. Good Emulsifying Properties: Helps in the dispersion of oils and fats. Versatile: Suitable for a wide range of cleaning and detergent formulations. Cost-Effective: Provides high performance at a reasonable cost. Applications: Household Cleaning Products: Laundry Detergents Dishwashing Liquids All-purpose Cleaners Industrial Cleaners: Engine Degreasers Heavy-duty Detergents Industrial Floor Cleaners Personal Care Products: Shampoos Hand Washes Technical Specifications: Active Matter: 90% min Color (Klett): 50 Free Oil: 2.0% Sulfuric Acid: 1.5% Water Content: 1.0% Packaging: LABSA 90% is available in various packaging options to suit customer requirements: 220 kg HDPE Drums Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
The Cutera Excel V is one of the most advanced laser system that addresses both vascular and pigmentation skin concerns. This laser incorporates two wavelengths ie. 532nm and 1064nm and is effective for all skin types (even darker skin types). This treatment is perfect for you if you frequently find yourself hiding behind concealer and want to improve your skin tone or you simply want to look fresher with more radiance or glow to your skin! The first laser to feature 2 ultra-precise, best-in-class wavelengths (532/1064 nm) and 3 unique operating modes to treat a wide range of superficial and deep vascular lesions, pigmentary issues and skin revitalization concerns safely and effectively. Applications include rosacea, to diffuse redness, facial veins, leg veins, periorbital veins, angiomas, port wine stains, poikiloderma, wrinkles, venous malformations, bruising, inflammatory acne, benign pigmented lesions, age spots, small area hair removal, scars, and acne scars. Vascular lesions are a type of common skin concern, affecting up to 50% of individuals aged 18 years and older1. Furthermore, with over 40% of the population susceptible to pigmentary concerns2, these conditions, whether chronic or cosmetic, can have a serious effect on peopleâ??s quality of life and well-being. The award-winning excel V was developed based on feedback from leading physicians worldwide. A solid-state laser system that incorporates two proven wavelengths â?? 532 nm and 1064 nm â?? to address more than 20 unique indications on all skin type. The excel V laser system features the broadest set of capabilities for treating the widest range of superficial to deep vascular conditions, benign pigmented lesions and skin revitalization concerns. 2013 Cutera Excel V with 532nm & 1064 nm Q-Switched for Skin Conditions, Vein & Pigment Removal; Excellent Cosmetic and Operating Condition, Low Usage (this system does not track pulses), Single Owner, Received Inspection and Full Maintenance Service on 0n 02/03/2021, and is Functioning at Highest Levels with No Errors, Service Report is Available Upon Request; Software Version: 2.4; Includes: Includes: (2) Handpieces, Key, Footswitch, Operator Manual, (2) Operator Eyewear.
Garden swing Rud Antalya with mosquito net produced by LLC TH "Rud E.S." The swing seat, thanks to the "One-click" system, can easily be transformed into a sleeping place. The tilt of the awning is adjusted using special screws with a plastic handle located on both sides of the roof base. Mattress size: 500*1800 mm. - 2 pieces, sewn together. Mattress covers with a zipper for easy removal of the filling. Thickness: 80 mm foam rubber. Mattress fabric: Dralon* (Spain), awning fabric: Dralon* (Spain). DRALON is a trade name for polyacrylonitrile fiber (LAM) coated with Teflon. Fabrics made from DRALON fiber are very durable, even after many years of use they do not fade, and guarantee strength and durability. Thanks to the Teflon coating, the fabric is very easy to care for. The dirty surface is easy to clean; the Teflon coating lasts up to three washes. The fabric dries quickly. Base: reinforced structure pipe 57*1.5 mm, painted with polyethylene thermoplastic paint followed by polymerization in a painting booth, which guarantees excellent durability of the coating.
Ultra-lightweight, just over 7 lbs. Seriously protective, with Aeroflex foam that is resilient and minimizes force transferred to baby by absorbing and diffusing the energy. Adjustable headrest. No re-thread 5-point adjustable harness. Merino wool insert, exclusive to Bugaboo for optimal climate control and temperature regulation of baby. Sun canopy features an extendable Smart Shade, mesh peek-a-boo window, and UPF 50+ protection. Magnetic buckle holder. Ergonomic carry handle. 4-position recline base with clear guides for use as baby grows. Recline base features locking steel stability leg for improved vehicle fit, open belt path for easier installation, and a 4-position recline in the base. Belt path for rides without the use of a base. Compatible only with Bugaboo strollers: Donkey, Fox, Butterfly, Lynx, Bee, Ant, and Cameleon 3/3+*. Removable and washable Oeko-Tex certified fabrics. Good Housekeeping Parenting Award Winner. Meets security standard FMVSS 213. 2-year warranty.
Product Description OVERVIEW Level of Play Elite Fit Profile Low, Medium, High Volume Weight 899 grams (Size 9) Heritage JetSpeed FT2 / FT1 Model Number JSFT4P Available Sizes 4.0-11.5 Available Widths Tapered, Regular, Wide Specifications KEY TECHNOLOGIES One-Piece Boot Compared to its two-piece counterparts, the One-Piece design is lighter, better at transferring energy and better wraps around the foot for an improved fit. What does this mean? One-Piece boots make players quicker and faster. Learn even more about it here. SpeedBlade XS Tongue System An easy and secure clip system gives you the ability to use one of three aftermarket CCM tongues. Slim is the lightest and slimmest, which reduces weight and increases internal volume. Regular is the most similar to the stock tongue but comes with D3O Smart Foam for top-tier protection. Extra is the thickest and most protective, which also reduces internal volume. View all of the options here. Asymmetrical Toe Cap A new, lower-profile design provides an even better foot-to-ice connection with a comfortably snug feel. Plus, traditional toe caps reduce energy transfer since the feet are not as secure as they could be. BOOT Construction 3D One-Piece Speed Material RocketFrame Composite Heat Moldable Yes Tongue Replaceable, Asymmetrical Metatomic XS Tendon Guard Injected, Reinforced Facing Low Profile Laces Unwaxed Midsole Composite Outsole None LINER Lining Material TotalDri+ Abrasion Reinforcement Yes Collar Padding Yes Ankle Padding ADPT Memory Comfort Foam Footbed CCM Ortholite UltraLite RUNNER Construction Step Steel Black +4mm Removable Yes Material High-Grade Steel Finish Carbon Chrome Height 21mm Radius 10' HOLDER Construction SpeedBlade XS Release Mechanism Tool-less Dial Branch Office Best Scooter Store Menara Karya 23rd floor Jl. H.R. Rasuna Said, Blok X-5, Kv. 1-2 Jakarta 12950 - DKI Jakarta Indonesia Phone : +62 (21) 57945487 Fax : +62 (21) 57944748 Whatsapp : +62 852 1840 2436 Instagram : @bestscooterstore Website : bestscooterstore.com
EverFlon ®PTFE Dispersion Fine Powder F500 is a soft white polymer made from a water-based dispersion of PTFE. These fine powders have the lowest coefficient of friction, highest heat resistance, chemical resistance, electrical properties and non-stick properties of all fluoropolymers. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. EverFlon ®PTFE F500 is designed for machining at medium and high pressure rates from 100:1 to 600:1. It is particularly suitable for the production of high quality tubes, spiral tubes and wire coatings. This grade is also well suited for post-processing techniques such as flanging, welding, blow molding and turning. Processing suggestion EverFlon ®PTFE F500 is extruded using liquid processing AIDS such as naphtha. During the paste extrusion process, the powder is mixed with a lubricating agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical pre-formed bad material. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through a finishing die under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F500 is usually processed under heat in a step-by-step process into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°(648°F) and produce a non-porous solid PTFE resin.
Fluoron PTFE fine powder F100 is a soft, white polymer made from an aqueous dispersion of PTFE. These fine powders have the lowest friction coefficient of all fluoropolymers and the highest heat resistance, chemical resistance, electrical properties and non-stick properties. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. Fluoron PTFE F100 is designed for machining with low compression ratios of 10:1 to 300:1. It aims to promote the production of high-quality, low-density tapes Processing suggestion PTFE F100 is extruded using liquid processing AIDS, such as naphtha. During the paste extrusion process, the powder is mixed with a lubrication agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical preformed blank. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through the finishing mold under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F100 is usually further processed under heat into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.
In winter, the temperature is low, and the freezing and low-temperature climate caused by rain and snow can easily cause equipment to freeze and crack. In order to ensure the safe and normal operation of the equipment, what do we need to pay attention to. Letâ??s find out. First, insulation materials need to be added to the water pump to prevent the water pump from freezing; Second, empty the slurry in the pump chamber of the water pump that is not in use temporarily, and then refill the pump when in use. This can also effectively prevent the water pump from freezing and cracking; Third, if our slurry pump is in the basement, the doors and windows need to be closed, and the unfinished underground pump room and wind tunnels must be blocked with something. Fourth, because our slurry pumps undergo water closure tests when they leave the factory, there will be water in the pump chamber and pipelines of the factory slurry pumps. If the equipment is not ready to be installed and used, the pump chamber needs to be removed. Drain the water inside. Fifth, when we find that the water pump has become slurry, do not start the slurry pump. You can use hot water or boiling water to pour into the pump cavity to melt the ice, or heat the casing of the water pump. Sixth, if conditions permit, move the slurry pump to a warm place to melt ice naturally. If you want to know more about slurry pumps, please feel free to call us! Shijiazhuang Pansto Pump Industry is a manufacturer of slurry pumps in Shijiazhuang. It mainly designs, manufactures and sells slurry pumps and accessories. Mainly engaged in mud pumps, submersible pumps, foam pumps, desulfurization pumps and many other series. Single-stage slurry pump, slurry pump diagram, slurry pump curve, slurry pump specifications Slurry pump brand Warman slurry pump ZJ slurry pump ZGB slurry pump AH slurry pump SP slurry pump vertical liquid slurry pump
Product Description DESCRIPTION Automatic Microfoam Milk Texturing. The automatic steam wand allows you to adjust the milk temperature and texture to suit your taste. Delivering barista quality micro-foam that enhances the flavour of the coffee and is essential for creating latte art. Faster heat up time. Innovative ThermoJet heating system achieves the optimum extraction temperature in 3 seconds. Ready to make your best coffee without the wait. 19 grams dose for full flavour. Achieve a consistent and balanced espresso using the right amount of ground coffee. The 54mm porta-filter with 19 grams is the key for full flavour and cafe quality coffee. Low pressure pre-infusion. Low pressure pre-infusion gradually increases pressure at the start and helps ensure all the flavours are drawn out evenly during the extraction for a balanced tasting cup. Precise espresso extraction. Digital temperature control (PID) delivers water at precisely the right temperature, ensuring optimal espresso extraction. Specification Included in the Box 54 mm tamper, the Razor Precision Dosing Tool, 480ml stainless steel milk jug, 1 & 2 cup dual wall filter baskets, cleaning tool, cleaning disc Model Number BES500BTR1BCA1 Milk Option Automatic or Manual Steam Wand Grinder No Heating System ThermoJet Heating System Water Filter Compatibility Breville Charcoal Water Filter Water Tank Capacity 1.9 L (64 fl oz) Pump Pressure 9 bar (15 bar Italian pump) User Interface Buttons Beverage Varieties Double & Single Espresso, Hot Milk, Hot Water Other Settings Programmable shot volume, adjustable milk froth texture (3 levels), adjustable milk temperature (3 levels), steam button Temperature Settings PID temperature control for optimal brewing temperature. Temperature 195�ºC - 200�ºC Heat Up Time 3 seconds Grinder Settings N/A Coffee Grinds Hopper Capacity N/A Coffee Grounds Container Capacity N/A Coffee Powder Option N/A E.S.E. Pod Compatibility No Double Cup No Milk Double Cup No Removable Brew Group No Removable Drip Tray Yes Cleaning Routine Descale, flush process Certifications N/A Auto Off No, machine will go into stand-by mode Dimensions 19.5 cm W x 32 cm D x 31 cm H Power / Voltage 1560 W / 120 V Materials Stainless Steel Country of Origin China Use & Care For detailed care instructions, please refer to your machine'suser manual. We recommend that you also incorporate the following into your cleaning routine: Descale every 2-3 months. We recommend using Breville The Descaler. Soap out water tank (if applicable) and drip tray every few days Keep the stainless steel casing shiny with a microfiber cloth Optional: Perform backflush routine and clean the filter basket each week
Features for the California Air Tools 10020DSPC Air Compressor mowerequip....com The CALIFORNIA AIR TOOLS 10020DSPC Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 horsepower air compressors in the industry having only 58 decibels of sound. Designed for many applications including Dental Offices and Milling Machines. The powerful 2.0 HP motor operates at only 1680 RPM creating less noise, vibration and creating less wear. The Oil-Free Dual Piston Pump System is engineered for longevity, high performance, and durability. The SP-9421 Motor/Pump is tested for a minimum pump life of 3000 hours before service. 30% more life before repair Large 10.0-gallon steel air tank. The Air Dyer is specially designed to remove the water vapor from the air to protect sensitive tools and machinery. To dry the air from the air compressor an Aftercooler and Dryer are utilized. The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the Air Dyer. The sturdy large steel cabinet on caster wheels makes it easier to move and reduces the noise level. The interior of the cabinet is lined with acoustic sound proofing foam insulation to reduce the air compressor's noise and vibration. The two latching door handles allows for easy access to the air compressor.'' The two exhaust fans are designed to remove the air from the cabinet for a cooler running air compressor. This air compressor is ideal for anyone working inside (office, shop, store, warehouse, or home) where noise is a major issue. Activated Alumina is used in air repurification (due to its high water and carbon dioxide adsorption capacity) and adsorption of sulfur compounds. Commercial Use Assembled in USA with global components Air Dyer Includes Activated Alumina desiccant with a 4000-hour life. Oil-Free Pump Cleaner air for better tool operation. Less maintenance and Costs. One 1/4 Industrial female quick connector Two Pressure control gauges Thermal Overload Protector Specifications Sound (Ultra Quiet): 58 decibels Maximum Pressure: 130 PSI Kick On Pressure: 100 PSI Kick Off Pressure: 130 PSI Volts: 110v Hertz: 60 Hz Low Amp Draw: 14.0 Amps Tank fill rate from empty to full: 130 Seconds Recovery time from 100 PSI to 130 PSI: 40 Seconds Duty Cycle: 70/30 Maximum Run Time: 30-60 min. (Depending PSI & CFM) Dimensions: L (26") x W (30") x H (39.5") Weight: 221 pounds Aftercooler: Condenser Horsepower: 2.0HP (Rated/Running) Air Flow Per Minute: 6.40 CFM @ 40 PSI Air Flow Per Minute: 5.30 CFM @ 90 PSI
Here are some important factors to consider when purchasing a home hospital bed Medical Needs: Know your loved one's specific medical needs. Different beds have different features, such as adjustable height, head and foot positioning, and side rails. Choose a bed that fits your loved one's medical condition and provides the support needed. Size and space: Consider the available space in the room where the bed will be placed. Home hospital beds come in a variety of sizes, so make sure the bed is comfortable and doesn't overcrowd the room. Adjustability: Look for a bed that offers a variety of adjustment options. These may include adjustable height, head tilt, foot tilt, and sometimes even Trendelenburg and reverse Trendelenburg positions. These adjustments contribute to comfort, pain management, and medical treatment. Weight-bearing capacity: Make sure the weight capacity of the bed is appropriate for your loved one's weight. Exceeding the weight capacity can lead to safety issues and potential damage to the bed. Mattress type: Mattresses are critical for comfort and pressure relief. Foam mattresses, air mattresses and gel mattresses are common choices. Choose a mattress that fits your loved one's comfort needs and medical condition. https://www.newcentury-medicalbed.com/sitemap.xml Side rails: Some beds come with side rails for safety. Consider whether your loved one needs side rails to prevent falls. Make sure the rails are easy to lower and raise for transfers. Mobility and portability: If you anticipate needing to move the bed around the house, consider the bed's mobility features. Some beds come with wheels and are easier to move, while others may be more stationary. Easy to clean and maintain: Home beds should be easy to clean and maintain to ensure a hygienic environment. Look for beds with removable and washable covers and surfaces. Power source: Some adjustable features (e.g., height adjustment and tilt function) require electricity. Make sure there is a convenient power source nearby and that the bed's electrical components are safe and reliable. Warranty and support: Check the manufacturer's warranty and after-sales support. A reliable warranty will give you peace of mind if anything goes wrong with the bed. User-friendly controls: The controls used to regulate the various functions of the bed should be easy to understand and operate for both the user and the carer.
Cellrato Foam Cleansing 1. 24K pure gold foam cleansing a.It contains pure gold, a Beauty secret method of poppy and Ceopatra , to Give your skin a Golden Glow. b.It is effective in improving wrinkles by activating the mood of cells and increasing skin elasticity. c.Reduces Collagen Consumption and finishes with a glossy face. Pure gold generates negative ions, Which are the same as the human body , and these negative ions help blood circulation and enhance skin penetration of active cosmetics. "GOLD' has an excellent effect on skin cleansing, detoxification and skin tone improvement and releases harmful substance in the body to the outside. 2. Snail Foam Cleansing Containing Snail mucus filtrate that makes the skin shiny and elastic. It supplies moisture and nourishment to the skin, and the fine and fine foam cleanses the dead skin and pores on the skin cleanly to remove make up and keep the skin smooth.
High Quality Anionic Surfactants Wholesale Anionic surfactants are a type of surfactant characterized by the presence of a negatively charged (anionic) functional group. They are widely used in various industries, including personal care, household cleaning, and industrial applications. Anionic surfactants possess excellent foaming, wetting, emulsifying, and cleaning properties, making them effective in removing dirt, oil, and stains. Common examples of anionic surfactants include sodium lauryl sulfate (SLS) and sodium laureth sulfate (SLES). Forward Science Anionic Surfactants Hot Selling Sodium Dodecyl Benzene Sulfonate CAS No.25155-30-0 Excellent surfactant used in detergents, shampoos, and cleaners. Sodium Dodecyl Sulfate CAS No.151-21-3 Excellent surfactant with excellent foaming, emulsifying, and cleaning properties, widely used in detergents and cleaners. 2 / 2î?½ î?? Various Types of Anionic Surfactants Sodium Dodecyl Benzene Sulfonate CAS No.25155-30-0 Sodium Dodecyl Sulfate, CAS No.151-21-3 Application Cases of Anionic Surfactant Laundry Detergents Anionic surfactants efficiently remove dirt and stains from fabrics, ensuring clean and bright laundry results.
1.Sun BB Cream : Excellent fit and Coverage, Anti Wrinkle BB Cream it has no bleeding and excellent Skin Adhesion to cover skin defects naturally and evenly corrects skin tone without using makeup base or foundation. it contains wrinkle-improving functional ingredients adenosine. King radish leaf extract. lotus extract. etc. it is a nourishing BB Cream. 2. Jeju Horse Oil : MAYU Sun BB Cream Multi-Functional to block ultraviolet rays: Horse Oil helps protect, Nourish and moisturize the Skin. it does not get rid of sweet and water, so it naturally corrects skin tone. Moisturizing effect/Sun Cream. Horse oil Sun BB Cream 50ml . SPF50+/PA+++ Blemish Balm Cream It is a sunscreen functional cosmetic with excellent sunscreen effect. A. UV Protection B. Moisturizing C. Cover 3. Snail Mucus Filtrate.(Snail Sun BB Cream)/ Naturally Covered Snail Sun BB Cream It is a cream that smoothly spreads on the skin with a creamy and soft feeling,expresses bright an healthy skin tone by naturally covering the flaws of the skin,and contains snail mucus filtrate to improve the rough side of the skin from external harmful substances. 4. 365 days Sun Cream / SPF 50+/PA+++ It effectively protects your skin from the intense sun. Moisturizing Ingredients prevent skin roughness and dryness. it is also a functional sunscreen that is not easily removed from water.
Material: aluminumaluminum Process: Cnc machine-wire drawing-riveting-anodizing-silk printing Color: steel color we offer powder coating and we supply red black blue and other colors Tolerance+-0.1mm The surface of this product is very smooth. There is no burr at the edge of the board. Its application is in the electrical field. Aluminum processing advantages are stable processing quality, high precision, high repetition accuracy. The advantages of CNC machining aluminum are good quality, high size accuracy, better finish, not easily deformed and long service life. After wire drawing, there should be no scratches or bruises on the surface. Wire Drawing: it is a kind of abrasive belt grinding. By grinding the metal surface with sand belt, the defects on the metal surface can be removed and the decorative surface with uniform grain can be formed. Packaging Details 1. Prevent from damage. 2. Foam and paper box or wooden box. 3. As to customers' requirements, in good condition We provide you with custom CNC billet aluminum parts. For more information about china sheet metal fabrication, please feel free to contact us!
