Button head socket cap screw Standard: Amse b18.3; iso7380; gb70.2 Size: #0-5/8â?�; m3-m16 Material: Carbon steel, alloy steel, stainless steel, brass Grade: Astm a307gr.A, class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Socket shoulder screw/ socket head shoulder screwsâ Standard: Iso7379; gb5281 Size: 6.5mm-25mm Material: Carbon steel, alloy steel, stainless steel, brass Grade: Astm a307gr.A, class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Philips machine screw/cross recessed machine screw Standard: Asme/ansi b18.6.3;din7985;din967;din965;din966;gb822 Size: #0-3/4â?�; m1.6-m10 Material: Carbon steel, alloy steel, stainless steel, brass Grade: 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Torx machine screw Standard: Din34802; iso14580; iso14581; iso14583; iso14584; iso14579; gb2671; gb2672;gb2673;gb2674 Size: M2-m10; m5-m20 Material: Carbon steel, alloy steel, stainless steel, brass Grade: 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Slotted machine screw Standard: Asme/ansi b18.6.2;din84; din85;din963;din964;din427 Size: 1/4â?�-3/4â?�; m1.6-m10 Material: Carbon steel, alloy steel, stainless steel, brass Grade: 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Hex nut Standard: Asme/ansi b18.2.2;din934;din555 Size: 1/4â?�-1-1/2â?�, m6-m42 Material: Carbon steel, alloy steel, stainless steel, brass Grade: Sae j995 gr.2, 5, 8; class 4, 5, 6, 8, 10, 12 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel;metal building;oil&gas;tower&pole;wind energy;mechanical machine;automobile;home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Nylon insert lock nut Standard: Asme/ansi b18.2.2;din985;din982;iso7042 Size: 1/4â?�-1-1/2â?�; m6-m38 Material: Carbon steel, alloy steel, stainless steel, brass Grade: Ifi-101, ifi-100/107 2007, sae j995 gr.2, 5, 8; class 4, 5, 6, 8, 10, 12 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Wing nuts Standard: Asme b18.6x; din315 Size: #3-3/4â?�; m4-m24 Material: Carbon steel, alloy steel, stainless steel, brass Grade: Sae j995 gr.2; class 4, 5, 6 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Aluminum Hydroxide for Solid Surface, the appearance of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution. It has low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. The advanced equipment and technology are used to make the shape of the product particles closer to the spherical shape. The viscosity and oil absorption rate are maintained at low levels. Increase the amount of aluminum hydroxide to save resin. FAQ Q: Are you factory? A: Yes, we are factory. Q: How is your quality? A: We have top grade production equipment and precision measuring instruments and we also have engineers and technicians carry out quality control. Q: Can you supply free samples? A: 1kgs free sample is available, but freight charges will be at your account, The charges will be return to you or deduct from your order in the future. Q: What about the payment? 100% T/T in advance, 30% T/T in advance, the balance 70% against the B/L copy, Irrevocable L/C at sight Q: The MOQ is? A: MOQ is usually 1 ton, special products can be coordinuted with each other. Q: Can I visit your factory? A: Yes, we welcome you to visit our factory at anytime Q: How about your delivery time? A: Usually the shipment is within 15 days after confirming receipt of your payment, some products maybe need longer time.
Stainless Steel Wire Mesh Stainless steel wire mesh is made of stainless steel wire through warp and weft woven.Mainly used for the filtration and screening of gas, liquid and solid, the separation of media and so on. Product description of stainless steel mesh Stainless steel mesh is one of the most popular woven wire mesh with different mesh, wire diameter, and aperture diameter to have a variety of types and woven wire mesh products. Therefore, it is a versatile mesh product, mainly used for filtration and sieving of gases, liquids and solids, separation of media, etc. Raw material Grade: 304, 304L, 316, 316L, 321, 310S, 202, 302, 430, etc. Features Resistant to acid, alkali, high temperature and abrasion, widely used in petroleum, chemical, automotive, new energy, food, pharmaceutical and other industries. Mesh types According to the opening type: square mesh and dutch mesh. According to the woven type: plain weave mesh and twill weave mesh. Other specific applications : Filters, sieves, separators, strainers, slurry screens, gas diffusion, sieving particles, vents, building and construction screens, craft paper, decorative screens, fan covers, filtering liquids and gases, fireplace screens, food drying, foundation ventilation screens, drain protection screens, high clarity screens, hydraulic filters, insect screens, lamp covers, oil filters, pest control, security, water-oil separation, etc.
Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 �± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray THINNER : Type 290 POT LIFE : 3 hours min at 30�° C RECOMMENDED DFT : 30-40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data :- COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 �± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray THINNER : Type 290 POT LIFE : 3 hours min at 30�° C RECOMMENDED DFT : 30-40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data COLOUR : Grey FINISH : Matt SOLIDS BY VOLUME : 40 �± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray THINNER : Thinner 290 POT LIFE : 3 hours min at 30�° C RECOMMENDED DFT : 30-40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Flameproof three-phase asynchronous motors of YB2 series (factory and mining); flameproof three-phase asynchronous motors for mines such as YBS, YBK2, YBF2, YBD2, YBGB2, YBPT, YBJ; Y, YKK, YKS (6KV, 10KV), H355-H800 high-voltage three-phase asynchronous motor; YR, YRKK, YRKS (6KV, 10KV), H355-H710 embedded high-voltage three-phase asynchronous motor; YB H355-H1500 series high-voltage medium-sized flameproof three-phase asynchronous motor 6KV, 10KV); T, TL, TK series synchronous motors and TAW increased safety explosion-proof synchronous motors (6KV, 10KV) and other 50 varieties Machine seat number: H355-H1500 Power: 160 ï½? 25000Kw Number of poles: 2-24 Voltage: 690 ï½? 11000V Frequency: 50HZ, 60HZ Explosion-proof grade Exe II T1, Exe II T2, Exe II T3 Protection level: IP44, IP54, IP55, IP56 Cooling method: IC511, IC516, IC611, IC616, IC666, IC81W, IC86W Explosion-proof motor is a type of motor that can be used in flammable and explosive places, and does not generate electric sparks during operation. Explosion-proof motors are mainly used in coal mines, oil and gas, petrochemical and chemical industries. In addition, it is also widely used in textile, metallurgy, urban gas, transportation, grain and oil processing, papermaking, and medicine. Explosion-proof motors are the main power equipment and are usually used to drive pumps, fans, compressors and other transmission machinery.
SSAW steel pipe for conveying gas Company Hebei Borun Steel Trade Co., Ltd Product Name SSAW steel pipe Outside Diameter 219.1 2540mm (8â?³ -100â?³) Wall Thickness 6mm 25.4 mm Length 6-13m Steel Grade Q235, Q345, A53, L245, L290, API 5L GR B, X42 ,X46, X70, S355, S275, S235 End Plain, Beveled Surface Treatment light-oiled, black painting , hot galvanizing, sand blasting, FBE, 2PE, 3PE etc Packing in bulk due to big sizes TPI SGS, BV, MOODY, CCIC Details of surface treatment Single-Layer FBE Coating SY/T 0315-2005, CAN/CSA Z245.20-2010, DEP 31.40.30.32-Gen-2011, ISO 21809-2-2007, API RP 5L9-2001 Double-Layer FBE Coating Q/CNPC 38-2002, CAN/CSA Z245.20-2010 2LPE/2LPP Coating SY/T 0413-2002, GB/T 23257-2009, ISO 21809-1-2009 3LPE/3LPP Coating SY/T 0413-2002, GB/T 23257-2009, DIN 30670-1991, CAN/CSA Z245.21-2010, ISO 21809-1-2009, NF A49-711-1992, NF A49-710-1988 Insulation Coating SY/T 0415-1996, CJ/T 114-2000, EN 253-1994 Application SSAW steel pipe is typically used to transfer gas, oil, or water Main Market South and East Asia, Middle East, Europe and America
SSAW pipe used for building bridge Company Hebei Borun Steel Trade Co., Ltd Product Name SSAW steel pipe Outside Diameter 219.1 2540mm (8â?³ -100â?³) Wall Thickness 6mm 25.4 mm Length 6-13m Steel Grade Q235, Q345, A53, L245, L290, API 5L GR B, X42 ,X46, X70, S355, S275, S235 End Plain, Beveled Surface Treatment light-oiled, black painting , hot galvanizing, sand blasting, FBE, 2PE, 3PE etc Packing in bulk due to big sizes TPI SGS, BV, MOODY, CCIC Details of surface treatment Single-Layer FBE Coating SY/T 0315-2005, CAN/CSA Z245.20-2010, DEP 31.40.30.32-Gen-2011, ISO 21809-2-2007, API RP 5L9-2001 Double-Layer FBE Coating Q/CNPC 38-2002, CAN/CSA Z245.20-2010 2LPE/2LPP Coating SY/T 0413-2002, GB/T 23257-2009, ISO 21809-1-2009 3LPE/3LPP Coating SY/T 0413-2002, GB/T 23257-2009, DIN 30670-1991, CAN/CSA Z245.21-2010, ISO 21809-1-2009, NF A49-711-1992, NF A49-710-1988 Insulation Coating SY/T 0415-1996, CJ/T 114-2000, EN 253-1994 Application SSAW steel pipe is typically used to transfer gas, oil, or water
China OEM auto parts of scroll 24v ac compressor A/C Parts 24V AC Compressor China OEM auto parts of scroll 24v ac compressor A/C Parts 24V AC Compressor OE NO.:N/A Car Model:Vehicles Warranty:1 YEAR Place of Origin: China (Mainland) Brand Name:Ala Certification:IATF1649 Size:216.5*150*162mm Product name:China OEM auto parts of scroll 24v ac compressor A/C Parts 24V AC Compressor Model Number:ACD-23D124V27F Material:Aluminum Color:Silver Voltage:24V CC:23 Refrigerant:R134a Weight:7KG Drive voltage range:21.5~31VDC RPM: 2000~3500RPM Items Basic parameters Model ACD-15 ACD-18 ACD-23 ACD-25 ACD-28 ACD-32 Displacement (cc/r) 15 18 23 25 28 32 controller F&T, which is determined by the compressor structure Refrigerant/frozen oil R134a/RL68H Rotated Speed Range(r/min) 2000-3600 Starting Time ?¤ 30S Voltage Range(V) 24---540V(DC) power (W) 600 800 950 1150 1300 1500 Efficiency Ratio(COP) 2.0 Sealed 10 g/year(y); moisture content ?¤1000ppm Noise 2800(rpm)h; 70 dB(A) Protection Grade Ip65 Insulation Resistance 500 ©(oil) Voltage Resistance (V) Conforms to GB/T22068-2008 standard 5.4.8 Weight(KG) 5-11
China OEM auto parts of scroll 24v ac compressor A/C Parts 24V AC Compressor China OEM auto parts of scroll 24v ac compressor A/C Parts 24V AC Compressor OE NO.:N/A Car Model:Vehicles Warranty:1 YEAR Place of Origin: China (Mainland) Brand Name:Ala Certification:IATF1649 Size:216.5*150*162mm Product name:China OEM auto parts of scroll 24v ac compressor A/C Parts 24V AC Compressor Model Number:ACD-23D124V27F Material:Aluminum Color:Silver Voltage:24V CC:23 Refrigerant:R134a Weight:7KG Drive voltage range:21.5~31VDC RPM: 2000~3500RPM Items Basic parameters Model ACD-15 ACD-18 ACD-23 ACD-25 ACD-28 ACD-32 Displacement (cc/r) 15 18 23 25 28 32 controller F&T, which is determined by the compressor structure Refrigerant/frozen oil R134a/RL68H Rotated Speed Range(r/min) 2000-3600 Starting Time 30S Voltage Range(V) 24---540V(DC) power (W) 600 800 950 1150 1300 1500 Efficiency Ratio(COP) 2.0 Sealed 10 g/year(y); moisture content 1000ppm Noise 2800(rpm)h; 70 dB(A) Protection Grade Ip65 Insulation Resistance 500 ©(oil) Voltage Resistance (V) Conforms to GB/T22068-2008 standard 5.4.8 Weight(KG) 5-11
Johnson strainer Grade: SUS201,SUS304,SUS316, Duplex2205, 2507, 3507, SUS906Stainless steel tube Size: 1.050" to 4"1/2 Stainless steel casing size: 4"1/2 to 20"The thickness for the tube:2.87mm to 16mmThe thickness for the casing:5.21mm to 20.24mm Standard: API 5CT, ASTM A312, API 5L Certification: ISO9001, SGS, CTI, ROHS, BV,DIN, GB, JIS, BA, ANSIThe threads type: STCLength:up to 6m (or according to clients' requests)Application:water/oil filter, oil wells, water wells, gas well, the chemical factories using Technique:Polishing&Wire wrapped&Welding Characteristics of Johnson strainerThe characteristics of the wire and rods:The welded stainless steel water well screen is made up of rods and wires. The rods can be round, triangular and trapezoid wire. The wire is triangular wire we also called v-shaped wire. The characteristics of the slot:the structure of the water well screen with high open area, as well as accurate dimension. Other characteristics of the water well screens: heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Use area of Johnson strainerThe strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters.Johnson screeScreen Size(in)Inside Diameter (in)Outside Diameter(in)OD of Female Threads End (in)2225/823/43335/833/44445/843/45555/853/46665/878885/891/41010103/4113/81212123/4133/814131/814??161516??2018 3/420??
CMC (Sodium Carboxymethyl Cellulose), when D.S is 1:00, its molecular formula is [C6H7O2(OH)2OCH2COONa]n, CMC is odorless, tasteless, non-toxic white or micro-yellow powder or granule which is made from natural cotton fibers or wood pulp, it can briefly be described as an anionic water-soluble polymer. Act as thickener, stablise emulsions, rheology modifier, water retention aid, filtration reducer, binder, dispersant, protective colloid, floating aid, etc, it can be widely used in Ceramic, Building, Oil Drilling, Detergent, Food, paper, Textile, welding and other industries. Application: Paint Grade CMC :With good dispersion, coating evenly distributed; not hierarchical and stable performance; has good tackifying effect, you can adjust the paint Viscosity; improve rheological property of the paint ;most of the surface-active agents and preservatives can be used with water-soluble paint match. CMC can be used in ceramic body, glazing pulp, and decoration. Used in ceramic body, it is a good strengthening agent, which can strengthen the mouldability of mud and sand materials, help the shaping of the base and increase the folding strength of the green body. Used in glazing pulp and decoration, it is a binder that plays a role of suspending, uncoagulating, and keeping water. In paper making industry, CMC is used to make the paint for coated paper, as additive in wet-end and sizing agent for surface. We have different paper making grades of CMC products to satisfy different customersâ?? requirements CMC is used in mining industry as pellet binder and floating selection inhibitor. CMC is a component of the binder for mineral dust shaping, and the binder is an indispensable ingredient in pellet forming. it can improve the character of wet pellet, dry pellet and calcinated pellet. Due to its good binding property and pellet forming property, the green pellet with CMC has excellent antiknock performance, high compressive strength and dropping resistance. It can also increase the grade of pellet. PAC (Poly anionic Cellulose) is a water-soluble polymer produced from cellulose chemically reacted with carboxy-methyl(anionic) groups which is widely used in water-based drilling fluid for a variety of applications, such as filtration control, viscosity and shale inhibition.
