Vegpro Soya Chunks 60 G Suppliers and Manufacturers

Cocoa Cake is rich in nutrients, protein & carbohydrates, has a strong natural cacao aroma and is commonly used in chocolate and beverage production. 1. Product Name: Natural Cocoa Cake 2. Ingredients: 100 % from cocoa bean 3. Intended Use: Raw material for cocoa powder. 4. Organoleptic Description: Appearance Kibbled Color Light Brown Taste Typical Cocoa, no off flavors Odor Rich Cocoa Aroma, no off flavors 5. Physical and Chemical Parameters Specification: Moisture % 5.0 max Fat Content % 10 -12 pH - 5 - 6 Lead (Pb) mg/kg 1.0 max Cadmium (Cd) mg/kg 0.5 max Mercury (Hg) mg/kg 0.03 max Tin (Sn) mg/kg 40.0 max Arsen (As) mg/kg 1.0 max 6. Microbiological Parameters Specification: Total Plate Count cfu/g 5000 max Yeast cfu/g 50 max Mould cfu/g 50 max Enterobacteriaceae /g Negative Salmonella /25 g Negative E.coli APM/g < 3 7. Standard: Based on SNI No. 01-7553-2009 8. Packaging: Multi-layer paper bags, food grade, with plastic polyethylene respiration in them. Nominal weight of 25 kg / net bag. 9. Optimum Storage Conditions: Store in a cool dry place away from strong odours, protected against water and heat. It is recommended to: Store in areas of low relative humidity, best under 60%. Store at relatively cool temperatures, preferably maximum 25C. Keep free from foreign odors such as coffee, tea, spices, chemicals etc. Transport temperatures should be ambient , recommended below 25C. 10. Shelf Life: Two years under recommended storage conditions.

Cocoa butter is used to make the highest quality of Chocolates and increasingly used in pharmaceuticals, cosmetics & personal care. 1. Product Name: Natural Cocoa Butter 2. Ingredients: 100 % from cocoa fat 3. Intended Use: Chocolate manufacturing, Cosmetics and other Cocoa confectionary. 4. Organoleptic Description: Appearance transparent and clear, with no visible sediments. Color Light Yellow Taste Full Cocoa Taste, no off flavors Odor Rich Cocoa Aroma, no off flavors 5. Physical and Chemical Parameters Specification: Free Fatty Acid, as Oleic Acid % 1.75 max Moisture % 0.2 max Iodine value gI2/100g 33-42 Peroxide value meq O2/kg 4 max Saponification value mg KOH/g 188-198 Unsaponifiable matter % 0.35 max Melting point C 31 - 35 Refractive Index (ND40 C) 1.456 - 1.459 Metal Contamination Lead (Pb) mg/kg 0.5 max Cadmium (Cd) mg/kg 0.5 max Tin (Sn) mg/kg 40 max Arsen (As) mg/kg 0.1 max 6. Microbiological Parameters Specification: Total Plate Count cfu/g 5000 max Yeast cfu/g 50 max Mould cfu/g 50 max Enterobacteriaceae - Negative Salmonella - Negative E.coli APM/g Negative 7. Standard: Based on SNI No. 01-3748-2009 8. Packaging: Carton boxes as secondary packaging, odorless and food grade specifications, with plastic High Density Polyethylene (HDPE) inside as primary packaging. Nominal weight of 25 kg / box net. 9. Optimum Storage Conditions: Store in a cool dry place away from strong odours, protected against water and heat. It is recommended to: Store in areas of low relative humidity, best under 60%. Store at relatively cool temperatures, preferably a maximum 25C. Keep free from foreign odors such as coffee, tea, spices, chemicals etc. Transport temperatures should be ambient, recommended below 25C. 10. Shelf Life: Two years under recommended storage conditions.

Measured Volume Burette Set Product Code: MED 169 Specifications: terile, individually packed in HM Pouch pack Size/Strength: burette capacity-100,150 ml (needle size-23 G x 1.0) Description Flexible graduated burette with marking upto 100/150 ml. Sharp beveled, smooth spike for easier penetration. 60 Drops/ml Air inlet with bacterial filter and injection port. Disc filter inside the drip chamber for adequate filtration. C-clamp for regulating the rate of fluid infusion to the patient. Soft roller clamp for regulating the rate of fluid infusion to the patient. Kink resistant tubing with self-sealing latex bulb for extra medication. Options of latex bulb/Y-shaped bulb; luer slip/luer lock rotator; vented spike/beveled spike.

Granule neutral cellulase enzyme textile bio-washing bio enzyme for denim garments detergent material Conzyme TM90 biozyme Processing condition ENZYME ACTIVITY 1500 u/g Appearance yellowish Purity This product contains no other components of enzyme activity Odor Slight fermentation odor Liquor ratio 5:1-20:1 Dosage Denim:0.1-0.3% owg Time 45-60 minutes Inactivation Raising temperature above 80â?? for 10 minutes, or raising the pH above 8.0 for 10 minutes can inactivate Conzyme TM600 completely. Benefit 1. High abrasion speed and good anti-back staining 2. Clean and even fabric surface 3. Softer handfeel 4. Brighter colors 5. Environmental-friendly & bio-degradation Should be stored in a dry place with temperature between 5-25 Package : 25kgs/drum; 1,125kgs/drum. Storage : Keep sealed in a dry and cool place and avoid direct sunlight. Shelf life: 12 months in a dry and cool place Reasonable & competitive price, fast lead time. Sample is available for your evaluation & Formulation development. Faster delivery: Sample order stock to be processed within 3-7 days for bulk production.

Eltee DMCC is the Largest Exporters of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to Bangladesh in very Large Quantities. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.

1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases. 2. Specification: Q/SHG19-2008ItemIndex Product: LM200 Apparent: White solid colloidal micro-particle Specific surface area m2/g: 150�±15 PH value3.6~4.3 Heating loss weight % (m/m) â?¤1.0 Burning loss weight % (m/m) â?¤1.0 Apparent density g/Lâ?¤60 3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber. LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink. LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component. LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc. 4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content. 5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.

Eltee DMCC is the Top Leading Exporters and International Suppliers of High Quality Soda Ash Dense in world. We supply Soda Ash Dense of high quality to more than 40 countries of world such as India, Japan, South Korea, Vietnam, Kenya, Australia, Egypt, Ghana , Uganda, Tanzania, Belgium, Botswana, Chile, Czech Republic, Ecuador, Guyana, Indonesia, Kuwait, Saudi Arabia, Oman, Morocco, Norway, Philippines, Rwanda, Senegal, South Africa, Tunisia, Zambia, Poland, Mexico etc. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.

V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

Ingredients: Skipjack tuna, Sunflower oil (Soya bean oil, Olive oil or in Brine), salt Chunk/Flake:70/30 Oil/Brine: 40/60, 50/50, 60/40 (or customer request) Lid type: easy open lid Net weight: 1700grs, 1880grs Can size: 603 Can/Carton: 06 tins Carton/20"FCL: 1600. Shelf life 3 years from date of production. we can produce canned tuna in the customer's brand.

Ingredients: Skipjack tuna, Sunflower oil (Soya bean oil, Olive oil or in Brine), salt Chunk/Flake:70/30 Oil/Brine: 40/60, 50/50, 60/40 (or customer request) Lid type: easy open lid Net weight: 140grs, 160grs, 170grs, 185grs, 1700grs, 1880grs Can size: 307 Can/Carton: 48 tins Carton/20"FCL: 2100. Shelf life 3 years from date of production. we can produce canned tuna in the customer's brand .