Tungsten Heavy Alloy Rod Suppliers and Manufacturers

Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater. â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid. â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a. â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a. â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C. American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544. German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061. We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe; Monel alloy 400 flat; Monel alloy 400 bar GB: NS111 ;JIS:NW4400;UNS:N04400;W.Nr:2.436 This alloy is mainly used for 1. Seamless water pipes and steam pipes in power plants 2. Sea water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. The pump shaft and propeller of the equipment used in seawater 6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation 7. Manufacture of pumps and valves used in the production of hydro

Made from acme quality steel, Stainless Steel Bright Bars are used in diverse industrial applications. Steel Round Bright Bar is appreciated for its chief attributes such as rust resistance and long life. We are acknowledged as one of the topmost SS Bright Bars Manufacturers from India. Stainless Steel Bright Bars can be obtained at cost effective prices Grades Austenitic Steel:301, 304, 304H, 304L, 310, 310S, 316, 316L, 317, 317L, 321, 347 Ferritic Steel:409, 409M, 410s, 420, 430 Martensitic Steel: 410, 416, 420, 431 Specification Finishes:Black, Bright, Matt Form: Round, Square, Hex

GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.

Standard ASTM B166 / ASME SB166 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,

Standard ASTM B160 / ASME SB160 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,

Standard ASTM A479 / ASME SA479 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm â?? 57mm (11/16â?³ to 2-3/4â?³) Square Bars 18mm â?? 47mm (11/16â?³ to 1-3/4â?³) Flat Bars 1/2â?? to 10â?? in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Standard ASTM A276 / ASME SA276 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm â?? 57mm (11/16â?³ to 2-3/4â?³) Square Bars 18mm â?? 47mm (11/16â?³ to 1-3/4â?³) Flat Bars 1/2â?? to 10â?? in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Offer HSM 1& 2 we can offer Grade: Steel Heavy Melting Scrap Metal HMS-1 as defined in the US ISRI Scrap specification circular 2020, predominantly composed of un-used / surplus oil pipes, disincorporated assets, sold as scrap metal and in the following proportions: Minimum 100% HMS 1 according to ISRI 200/201/202 with a minimum thickness of 6mm each lot. Specifications: Max. Dimension: 1.2 MTS. Thickness: 6 mm. Diameter: 2 7/8 Inches - 20 Inches. Impurities Tolerance: 0.75% Max. Oversize Tolerance: 1.5% Max. Max. Weight per Piece: 300 Kg Max.

Hallo Good Day we can offer ready stock HMS 1 and 2 Quantity - 1000,00 MT monthly Payment - LC Payable at destination after SGS Buyer can visit yard and verify stock Only serious buyers who can provide POF if necessary Mujib ALGA Group

Hallo We have ready stock 30,000 MT HMS scrap Only genuine and serious buyers may contact - POF may required during the process if price and terms confirmed Payment - LC at sight from prime bank We also Have japan Premium quality HMS 1 Second Quality Rails ( if buyer need POP need to follow procedure - require MT 705 - MOQ 50k - if some one need POP in theor name or see the product without providing any documents , please dont contact for rails case ) HMS we can provide PICS and POP against POF Only serious importers /Agents/direct Mandates may contact

Hallo Good day we can offer ready stock HMS 1 and 2 we also can offer Steel Turnings and Tin Plates we accept payment by LC Only serious and genuine buyers need to contact Quantity - 100000 -200000 MT per month or more Please contact us wats up - 0091 9895009900 or our direct e-mail - mujib@algagroup.in For our company details - please visit - www.algagroup.in Awaiting your reply Mujib

Hallo Good day we can supply Iron Scrap HMS 1 & 2 Origin - Japan Quantity 20 to 100K per month Interested importers kindly contact Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to end seller we assure best price and mark up ( conditional )

a. Name of product: FERROUS SCRAP HMS b. Price of product: USD$450~600/MT c. Product origin: TAIWAN d. Key Specifications/Special Features: HMS1 , HMS2 e. Harmonization System (HS) Code : 72044990 f. Minimum Order Size : 20MT g. Packaging details: LOOSE h. Monthly supply: 10000MT

A unique product of Aluminum briquettes made from aluminum turning Aluminum contain 90% above.