Four pieces Electrode design(2pcs for measuring, and 2pcs for grounding), easy to install, no need to install the grounding ring; Wide range of flow measurements, range ratio reaches 20:1; Pipe size range: DN15-DN2000; Strong resistance of interference, different exciting current frequency adopted for different diameter sizes; No movable part in the measuring pipe, no pressure-loss, low requirements for straight pipelines; Five-part nonlinear modification function of sensor, automatic operation of average flow, and easy for calibration.
High accuracy. The symmetrical arrangement of the multi-hole ensures the flow profile to be steady and conditioned thus reducing the turbulence effect. Life time is 5-10 times longer than the traditional throttling devices; Shorter straight pipe. In most cases, the length of straight pipe can be as short as 0.5D-2D; Low Permanent Pressure Loss. Symmetrical structure decrease the formation of vortex flow and turbulence friction, saving the running cost; Wide flow range. Range ratio can improve to 20:1 - 30:1 if appropriate parameter is selected; Repeatability and Long-Term Stability. Balance the flow field, and improve the repeatability.
Flowtech make electromagnetic flow meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using faraday's law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.
3-ply structure, effectively prevent from bacteria and dust . protect eyes and face from fluid,provide better safe property. Ultrasonic machine-sewed, with tieback and anti fog visor suitable for casualty wards and infection wards BFE>99%, Nelson testing report CE and FDA certified
Non-Woven, Spunbonded Fabric, Hot Air Cotton & Melt Blown Mask Type: 5 layers Non-Woven Hydrophobic and Hydrophilic Fabric, Hot Air Cotton & Melt Blown Multi Color and Print Fabric Bacterial filtration efficiency: 99% Particulate Filtration efficiency: Above 95% Product Type: Surgical/Non Surgical Individually Wrapped: Yes UV Sterilization: 2000 KW Sterilization Nose Clip: In built Sealing: Ultrasonic Mask Components Benefits and Standards 1st layer: 50 GSM Hydrophobic Spunbond nonwoven Excellent breath ability 2nd layer: 25 GSM Meltblown Fabric Non irritating, fiber glass free fabric 3rd layer: 25 Gsm Meltblown Fabric Non-woven Spunbond 100% Polypropylene 4th Layer: 60 Gsm Hot Cotton Hypoallergenic/Hydrophobic & Hydrophilic 5th Layer: 25 Gsm Hydrophilic Spunbond Nonwoven Comply with CE, GMP, FDA and ISO 9001 Nose Clip: In built or Aluminum clip Ultrasonic welding manufacturing process Sealing: Ultrasonic Mask Hygienic
Product Description - 3 Ply Face Mask With Meltblown Inner Price of product ( USD price or FOB price) - ON REQUEST Product origin - MUMBAI - INDIA Key Specifications/Special Features - "Made on an automatic mask making machine using lastest ultrasonic sealing technology The mask is made up of three layers of polypropylene nonwoven Ultrasonic Welded / Sewn loops Latex Free components Component 1st Ply - Outer Layer Description - 100%Polypropylene Nonwoven 20 GSM 2nd Ply - Filter Layer - 100%Polypropylene Nonwoven - 25 GSM Melt Blown Filter 3rd Ply - Inner Layer - Description - 100%Polypropylene Nonwoven 20 GSM Elastic Loops - Latex Free elastic loops Nose Wire - Polypropylene coated Metallic Wire Minimum Order Size and Packaging details - 100000 Pieces
Key Features BFE 95% for 3 ply mask and 99.9% BFE respiratory protection for N95 masks. Adjustable Nose Clip Ultrasonically welded headbands/earloop Straps Lycra based earloop Nose clip Aluminium/ PVC coated Meltblown Filters ISO 9001:2015 & CE certified approvals Quality is equivalent to EN1463, ASTMF2100 Mask is tested by method of IS 16288:2014 ASTMF2101-19 Tested in temperature (21+5) RH (85+5)% Time (4hrs) Tested by 3 micron aerosol
Characteristic: Long Scope of aplication: It is use to protect of diary environment. Material: The mask is formed by 5 layers of different material. The inner layer is non-woven material, the second and third layer are fabric blown by fusion, the fourth layer is cottom of hot air. The fifth layer is non-woven material, which is made by ultrasonic heat welding, electric welding, top strap and other processes..
Surgile brings to you these N95 Face Mask, it is designed to offer 95% filtration efficiency and protection against dust, dirt, water particles and other harmful micro-organisms that are present in the air in form of aerosols etc. This mask also features an adjustable nose piece with a soft inner foam nose cushion that lets the mask fit around the nose ridge properly while also making it comfortable for the wearer. This N95 mask also features ear straps that are ultrasonically bonded to the mask, no staples are used. The mask is made from superior quality, skin-friendly non-woven melt blown material, its ergonomic and contoured design offers low breathing resistance and high filtration efficiency.
PC-950 paper cup machine is improved based on the normal chain driving type. This machine is based on Open Cam System(No Gear Box).This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom punching, heating, rolling, rimming, rounding and tripping. It is an ideal equipment for producing drinking cups, market cups, coffee cups, advertising cups , etc. It is widely used for hot drink and beverage. If you need double pe coated paper cups or paper gram higher 250g/m2, we recommend you to use Ultrasonic paper cup machine. It can produce single pe coated paper cups and double pe coated paper cups.
Product Description - 3 Layers of protection: 1. Spun bonded Fabric - 25GSM 2. Melt blown Fabric �¢?? 25 GSM 3. Spun Bonded Fabric 25 Product origin - Haryana (India) Key Specifications/Special Features - 1. The raw material used is medical grade SITRA approved fabric. 2. JRG Safefit 3 PLY masks are fitted with Single CORE X 1/0.60MM nose bridge. 3. Earloops of JRG Safefit mask are made by using Nylon Spandex yarn which is softer and much more comfortable on skin as compared to conventional Polyester material earloops. 4. JRG Safefit masks come with additional side strips which seal the sides after earloop welding and prevent any possibility of transmission through any holes due to ultrasonic welding. Minimum Order Size and Packaging details - MOQ - 2000 Mask / 5ply Box Packing - 50 Mask / Monocarton "
Product Description - 3 Layers of protection: 1. Spun bonded Fabric - 25GSM 2. Melt blown Fabric 25 GSM 3. Spun Bonded Fabric 25 Product origin - Haryana (India) Key Specifications/Special Features - 1. The raw material used is medical grade SITRA approved fabric. 2. JRG Safefit 3 PLY masks are fitted with Single CORE X 1/0.60MM nose bridge. 3. Earloops of JRG Safefit mask are made by using Nylon Spandex yarn which is softer and much more comfortable on skin as compared to conventional Polyester material earloops. 4. JRG Safefit masks come with additional side strips which seal the sides after earloop welding and prevent any possibility of transmission through any holes due to ultrasonic welding. Minimum Order Size and Packaging details - MOQ - 2000 Mask / 5ply Packing - 50 Mask / Monocarton "
Product details Documents: CE, FDA, ISO 13485 Item no: 001 Product Name: Disposable Sterile and Non-Sterile Medical Ultrasonic Face Mask Use: Masks type II R - EN 14683 are suitable for situations when the patient's blood and / or body fluids in the workplace pose a risk to healthcare professionals. Material: SMS, PP non-woven face mask Classification: Class I, sterile or non-sterile Type: II R Color: white, blue Material info : Spunbond, Meltblown, Made from Spunbond PP fabric 3 LAYERS PROTECTION Spunbond, Meltblown, Spunbond are made of 100 % PP fleece. STERILE OR NOT STERILE We offer both sterile and non-sterile surgical face masks to suit your needs TYPE II R Infectious Disease Protection for Health Professionals and Patients CE & FDA REGISTRATION CE and FDA records checked from the manufacturing facility
OUTER LAYER: Type: Spun-bonded Material: 100% polypropylene Thickness: 25 - 28 GSM Characteristics: Hydrophobic Colour: Blue Other colours on request and subject to MOQ requirements MIDDLE LAYER: Type: Spun-bonded Material: 100% Melt-Blown Thickness: 25 - 28 GSM Characteristics: Electrostatic & Hydrophobic Colour: White INNER LAYER: Type: Spun-bonded Material: 100% polypropylene Thickness: 25 - 28 GSM Characteristics: Hydrophobic / Hydrophilic Colour: White EARLOOP: Material: 70% Polyester & 30% polyurethane Diameter: 3 mm Length: 175-180 mm Welding: Ultrasonic NOSE BRIDGE: Type: Double Wire Material: Aluminum Width: 3 mm Coating: Plastic Length: 100 mm
* Protection for people and workers who place great value on facial expressions such as children, people with hearing problems, police forces and nurses, The mask can be used also as non-sterile mask in hospitals and vaccine centres. No fogging of glasses thanks to extra soft nose pads. * Colour: Black and white * Size: Standard and children * Box: 50 pieces * Price per box: CHF 53.75 * Languages: Italian, French, German, * Brand: ST-Cleantech AG * English, and Spanish Price range: < 29 boxes -> CHF 53.75 > 200 boxes -> CHF 8.40 > 30 boxes -> CHF 52.70 > 500 boxes -> CHF 45.70 > 100 boxes -> CHF 51.10 First layer non-woven: White or Black: 50g (double S) Second layer: 25g melting spray cloth Third layer non-woven: White or Black: 25g (double S) Layer 4 PP transparent sheet: Thickness: 0.33mm +/- 0.1mm Size: 134mm x 37mm +/- 2mm Material: PP Classification /Standard: Medical device: Class I / according to DIN EN14683:2019. Duration: 2 years Material: Consisting of: non-woven fleece layer PP, filter material PP manufactured in meltblown process, PP window (13.4x3.7x0.2 cm) ultrasonically welded latex-free, nose clip, aluminium wire PE coated, ear bands made of elastane. Level of performance: Filter efficiency antibacterial : (BFE) Respiratory resistance : Resistance to pressure spray: Microbiological purity : According to type IIR (same test standard to be applied). Norm: 98% - Test result: 99.9%. (according to EN 14683:2019+AC:2019, Annex B). Standard:
Protection for people and workers who place great value on facial expressions such as children, people with hearing problems, police forces and nurses. The mask can be used also as non-sterile mask in hospitals and vaccine centres. No fogging of glasses thanks to extra soft nose pads. Colour: Black and white Size: Standard and children Box: 50 pieces Languages: Italian, French, German, English, and Spanish Brand: ST-Cleantech AG Classification / Standard: Medical device: Class I / according to DIN EN14683:2019. Material: Consisting of: non-woven fleece layer PP, filter material PP manufactured in meltblown process, PP window (13.4x3.7x0.2 cm) ultrasonically welded latex-free, nose clip, aluminium wire PE coated, ear bands made of elastane. Level of performance: According to type IIR (same test standard to be applied). Filter efficiency antibacterial (BFE): Norm: 98% - Test result: 99.9%. (according to EN 14683:2019+AC:2019, Annex B). Respiratory resistance: Standard:
This machine is suitable for non-woven packaging of mushroom soup bag, foot bath bag, heating bag, coffee powder, seasoning powder and other powder materials.
This machine is suitable for non-woven packaging of granular materials such as fever bag, foot bath bag, activated carbon, mushroom soup bag and Chinese medicine bag.
15Litre/H Industrial Ultrasonic Humidifier for Workshop Drop Dust Model: DYJ-1018 Ultrasonic frequency: 1.7MHz Ultrasonic power: 1800W Power supply voltage: AC220V 10% 50Hz(Voltage can be customized according to requirements) Product size (mm):600 x 600 x 600 Humidification amount: 18L/hour Application area: 180-200 square meters 2.5 meters tall Automatic wet control: can be achieved unattended, can set the humidity you need (99% ~ 10%) Automatic feed water Shell material: stainless steel paint Working temperature: 10
Specifications: Construction: open structure Using method: transmitter/receiver Center frequency: 23 +/- 1.0khz Sound pressure level: 115 db min. Sensitivity: -67 db min. Capacitance: 2500pf +/- 20% at 1khz Allowable input voltage: 80 vp-p Directivity: 50 +/- 15 degree Detectable range: 0.2 ~ 15m Resolution: 10mm Housing material: aluminum Carton lined with foam tray