Sonokeling Wood products is still needed throughout the world, it can have significant impact on price increases. We provide this Sonokeling Wood on an ongoing basis and can serve exports to your country. With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe. With our full support we help you become an importer of the products we sell.
Palm Wood products is still needed throughout the world, it can have significant impact on price increases. We provide this Palm Wood on an ongoing basis and can serve exports to your country. With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe. With our full support we help you become an importer of the products we sell.
The natural colour of Mango wood is most often golden brown, although there are also variations that have a more yellow tint, or feature black or pink streaks across its surface. The wood is often beautifully discoloured due to 'spalting', where wood can change different colours as a result of fungus
Has superior quality not inferior to teak wood This wood turns out to have export quality and is able to compete with teak wood. This fact shows that the wood or coconut glugu is of very high quality and is suitable for making furniture. Here are some of its characteristics: Has a fairly long size ranging from 5 to 30 meters. Brownish red in color. The darker the color of the wood, the darker it becomes. On the other hand, if it is young, the color of the wood is light brown or yellowish brown. The level of strength of young coconut glugu is not as strong as that of old ones. It has a large fiber shape that makes the surface texture rough. Quality coconut wood has a dense texture so it doesn't make a loud sound when tapped.
We supply Albasia Falcata light wood ### Density approx 300kg/cbm ### Suitable for making air flown Pallets ### Electronic pallet and its related purposes ### It could be raw material to make pallets or ready to use pallets ### Also available Mix Hardwood ( MLH) Medium Light Hardwood for all kind of usage ### Price Range FOB Jakarta Port usd 230/cbm - usd 250/cbm for the wood material
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
We supply 25mm, 26mm Plain Particle Boards for filling inside the doors. 2440x1220x26mm plain particle board shall weigh about 40kgs. We do particle board starting 9mm to 40mm and above for various purposes like lamination grade fully sanded on both faces, for routing purpose, furniture backing etc. 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded, suitable for Fire door -tested to BS standard We can also adjust the density of board as per our customer requirement. Our plain particle boards are priced competitive. Please contact us for more details.
Hollow Plastic Concrete Formwork for fundational building Size:1220*2440mm Thickness:15mm/18mm/20mm MOQ:100pcs Advantage:Reusable Application:concrete panels building formwork Color:Grey Weight:31kgs Quick Details: Product Name:Plastic concrete formwork Application:Concrete panels building formwork Material:PP plastic material Surface:Cleanly ,Glossy and smoothy Size: 1220*2440mm Thickness: 15mm, 18mm,20mm Type: Construction formwork Color: Grey Certificate: ISO9001:2008 Weight: 31KGS Packaging & Delivery Selling Units:Single item Single package size: 244X122X2.0 cm Single gross weight:31.0 kg Package Type:carton box packing onto wooden pallet Lead Time : Quantity(Piece)1 - 200201 - 336337 - 810>810 Est. Time(days)5715To be negotiated
Wood pellet, seafood and scrap.
We are production of Wood Chips from raw material from waste wood log, stems & wood branch, wood veneer and another wood waste that we doing processing by machine crusher to make Chips size with specification : Moisture: 45% max, Length: More than 40mm: 5% max, From 9 - 40mm: 82% min, From 4.8 - 9.5mm: 5% min, Less than 4.8mm: 5% max, Wood bark: 3%+/-, Foreign matters: 1% max, Average Size : 2-4cm with a thickness of about 2-8mm.