Used Engine Oil : Test Method Unit Range- Colour : ASTM Blackish Brown Density : 15 C ASTM D - 1298 Kg/L 0.87 - 0.89 Flash Point : ASTM D92 -12b C 150-210 Viscosity :50 °C ASTM D455-14 cSt 70-120 Water Content : ASTM D 95-13 % Vol 4-6 Max
A)CAPACITY: 2,20,000 TPA B)EQUIPMENT: Reheating Furnace fully automated with dual fired burner LPG/LDO.s High-pressure De-scaler. 4-Stand Housingless Roughing Mill in horizontal and vertical combination. 10-Stand Housingless Continuous Mill in horizontal/vertical combination with 8 loopers for tension free rolling and 2 shears for end cutting. 4 Cantilever stands in horizontal and vertical combination with Tungsten Carbide (TC) Rings. 10-Stand V-type, no twist wire rod block. Primary cooling line for controlling laying temperature. Laying head. 70 m long cooling conveyor with retarded, forced cooling and online quenching facility. Pallet type coil handling with vertical compactor. Mill fully automated by ABB drive and PLC. Solution Annealing Furnace. Pickling line with Effluent Treatment Plant. Wendt CNC grinding machine for TC Rings PRODUCT SPECIFICATIONS WIRE ROD a. SIZE RANGE : 5.5 - 16 mm (Wire rod block ) COIL WEIGHT : 850 kg COIL DIMENSIONS : ID: 800 - 900 mm OD: 1250 (wire rod block) TOLERANCE : As per EN 10088 SUPPLY CONDITION: Hot rolled (HR Hot rolled + pickled (HRP) b . SIZE RANGE : (Available in mm) 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12, 13, 14, 15 and 16. COIL WEIGHT : 50 kg, 25 kg SUPPLY CONDITION : Hot rolled + annealed + pickled (HRAP) c . SIZE RANGE : Under commissioning: 17 - 40 mm (garret coiled) GRADES ASTM: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 316, d16L, 316LN, 316Ti, 316LCu, 321, 410, 420, 430, 430L, 904L DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.4570, 1.4571, 1.4578, 1.4597, 1.4362, 1.4370 and 1.4016 Electrode Grades: ER304, ER304L, ER307, ER307SI, ER308, ER308L, ER308LSi, ER310, ER316, ER316L, ER316LSi, ER347, ER347SI, ER309L, ER430 and ER420 *Specialised grades also available as per customer requirements
Commodity: CEMENT Specifications: PORTLAND TYPE 1 HIGH STRENGTH Grade: 52R Origin: VIETNAM Factory Capacity: 2,000,000MT per Month FOB Price: 60 USD per MT MOQ: 10,000MT Payment Terms: TT or LC at Sight of Origin
Price of product ( USD price or FOB price) : $285/ton cnf Product origin : Nigeria Key Specifications/Special Features : Size: 20mm-80mm Fixed carbon: >75% Moisture: 8% Ash content:
Product Description : Price of product ( USD price or FOB price) : $400/ton cnf Product origin : Nigeria Key Specifications/Special Features : Size: 40mm-150mm Fixed carbon: >75% Moisture: 8% Ash content:
Price of product ( USD price or FOB price) : $500/ton cnf Product origin : Nigeria Key Specifications/Special Features : Size: 40mm-150mm Fixed Carbon : >80% Moisture:
Ordinary Portland Cement For Sale Type I/ii Low Alkali Astm C 150 Can Provide Specifications Characteristics Upon Request We Can Arrange For Quantities From 20.000mt - 50.000mt Per Month In Big Bags Of 1.5tons & 2.00tons Do Not Hesitate To Contact Us For Prices Basis Fob Or Cif Or To Provide What Is Your Required Specifications To Arrange
Cement Portland CEM I 42.5 N, product available, prodution capacity: more than 100000 t/day.
Extreme Pressure Industrial Turbine EP Oil 32/46 DESCRIPTION KORYO TURBINE EP OIL is a premium high-quality turbine oil with extreme pressure additives, designed of modern gas turbines and combined cycle gas turbines, it provides oxidation inhibitors, protection against rust & corrosion and excellent air release properties, recommended for hydraulic turbines, industrial gas and steam turbines, rotating machinery, machine tools and air compressors hydraulic systems PERFORMANCE Siemens TLV 9013 04/05, ASTM D4304-Type II, DIN 51515, Part I/II, Alstom HTGD 90117, Cincinnati Machine P-38, U.S.Steel 120, MAN Turbo & Diesel TQL T2, British Standard BS489, DIN 51515, PART I (L-TD), PART II (L-TG) PACKAGE 20L, 200L Steel Pail/Barrel
Fly Ash a byproduct derived from the combustion of coal encompasses the finely dispersed particles that ascend with the flue gases The ash which accumulates at the bottom is referred to as bottom ash Prior to venting through the chimneys of coalfired power plants Fly Ash is diligently captured by electrostatic precipitators and other particle filtration equipment When combined with bottom ash extracted from the furnaces base it collectively assumes the nomenclature of coal ash The specification of Fly Ash varies significantly contingent upon the coal type in use however it consistently contains notable quantities of silicon dioxide and calcium oxide CaO both intrinsic constituents of numerous coalbearing rock strata Our establishment headquartered in India boasts a distinguished reputation as a Fly Ash Exporter catering to diverse sectors including cement ready mix concrete steel refractories and the construction industry Prominent Applications of Fly Ash encompass 1 Manufacture of Portland Pozzolanic Cement Performance Enhancement in Ordinary Portland Cement OPC 2 Partial Replacement of OPC in Cement Concrete 3 HighVolume Fly Ash Concrete 4 RollerCompacted Concrete Employed in Dam and Pavement Construction 5 Production of Ash Bricks and Other Building Materials 6 Construction of Road Embankments Structural Fills and LowLying Area Development 7 Utilization as a Soil Amendment in Agriculture and Wasteland Development Fly Ash can be categorized into two types based on the coal used Class F Fly Ash This type results from the combustion of anthracite and bituminous coal Class F Fly Ash typically contains lower levels of lime usually under 15 percent but higher proportions of silica alumina and iron exceeding 70 percent Class C Fly Ash Produced by burning lignite or subbituminous coal Class C Fly Ash exhibits selfcementing properties It often possesses a higher lime content frequently exceeding 15 percent and sometimes reaching as high as 30 percent This elevated CaO content contributes to the distinctive selfhardening attributes of Class C Fly Ash Both Class F and Class C Fly Ash are outcomes of coal combustion in largescale power plants Following collection in electrostatic precipitators or baghouses Fly Ash is transferred to substantial silos for distribution To ensure consistency and quality Fly Ash is classified according to precise particle size specifications when required Our minimum order quantity is one container reflecting our commitment to meeting the diverse needs of our clientele
1. Shape of charcoals which are; i. Lump shape wood charcoal ii. Stick shape wood charcoal, also called finger charcoal. 2. By their sizes which are i. BBQ charcoal, which is mostly from 40mm downwards ii. Restaurant grade wood charcoal, these are big sizes from 40mm to 200mm iii. Shisha grade wood charcoal. This is always in stick shape and makes use of the best wood. 3. By wood types which are of different types depending on the country; Here in Nigeria, we have, - Ayin wood charcoal as our best wood charcoal - Acacia wood charcoal - Oakwood charcoal - Mahogany wood charcoal - Rosewood charcoal Mixed wood charcoal is a mixture of all of the above.
We would like to offer our Origin Building Materials for as follows: 1. Commodity: Portland Cement Type 1 42.5N and 52.5N Available direct from the factory manufacturer. 2. Production Capacity: More than 100,000MT Per Month. 3. Packaging: 40Kg/50Kg Kraft Paper Bag and/or Bulk Shipment. 5. Incoterms: FOB and/or CIF to be discussed. 6. Price: FOB $95 USD/MT. If you have any interest please send us your detailed request providing official LOI with letter headed company signatory and stamped.
Essential details Type: Seeds Variety: Cotton Seed Meal Use: Cattle, Chicken, Pig Admixture (%): 1 Moisture (%): 2 Grade: feed grade Packaging: 25kg/bag Place of Origin: AUSTRIA Brand Name: Peanut Oil Cake Model Number: Peanut Oil Cake Supply Ability Supply Ability 10000 Metric Ton/Metric Tons per Month Packaging & delivery Packaging Details 25/50kg PP bag or as customer's requirements. Lead time: Quantity(metric tons) 1 - 25 >25 Lead time (days) 7 To be negotiated Groundnut oil cake Groundnut oilcake is one of the best protein supplements for livestock feeding and is extensively used. Groundnut oil meal refers to solvent extracted residue and two grades (Grade I & grade II) are available in the market. Groundnut oilcake refers to expeller pressed and two varieties (Grade I & grade II) are available in the market. The common adulterant includes castor husk and Mahua oilcake. Groundnut oilcake has about 45% protein, which is deficient in cystein, methionine and lysine, but good source of Vitamin B12 and calcium. Protein 45% min Moisture 10% max Ash 0.9 % max Dimeater 28 - 30 cm Packing 50 kg / PP bag Use Cattle, Chicken, Horse, Pig
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME B462 / SB462 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM ASME B381 SB381 Dimensions ANSIASME B165 B1647 Series A amp B B1648 BS4504 BS 10 EN1092 DIN ANSI Flanges ASME Flanges BS Flanges DIN Flanges EN Flanges GOST Flange ASMEANSI B16516361647A1647B MSS S44 ISO70051 JISB2220 BS156031 API7S15 API7S43 API605 EN1092 Pressure Rating Class 150 LBS 300 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar PN6 PN10 PN16 PN25 PN40 PN64 Flange Connect Type Face Type Raised Face RF Ring Type Joint RTJ Flat Face FF Large MaleFemale LMF LapJoint Face LJF Small MaleFemale SMF Small Tongue Large Tongue amp Groove Groove Flange Size Chart 12 15 NB to 48 1200NB DN10DN5000 DIN Flanges DIN 2527 2566 2573 2576 26412642 2655 2656 2627 2628 2629 2631 2632 2633 2634 2635 2636 26372638 2673 Table D E F H Test Certificates EN 1020431B Raw Materials Certificate 100 Radiography Test Report Third Party Inspection Report etc Flange Form Slip On Flanges Socket Weld Flanges Forged Flanges Blind Flanges Welding Neck Flange Ring Type Joint Flange Spectacle Blind Flange Reducing Flange Threaded Screwed Flange Tongue and Groove Flange Long Weld Neck Flange Plate Flange ASME B165 Flange
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME B564 / SB564 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, C22 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2 (15 NB) to 48 (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME A182 / SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
