1) Sodium Silicate Liquid Liquid Sodium Silicate is a major compound used for formulating chemicals like silicate gel and precipitated silica. Apart from this, Sodium Silicate Liquid has an extensive usage in ceramic industry, paper industry, detergent industry as well as electrodes manufacturing companies. We cater to varied requirements of the clients by making available the Liquid Sodium Silicate in different grades like Neutral Sodium Silicate Liquid and Sodium Silicate Alkaline Liquid. Properties Its solution is alkaline. If add strong acids, weak acids and even electrolytes, it will hydrolyze and precipitate silica when it is heated or at room temperature. Packaging and storage It is packaged with clean iron drum, plastic drum or tank truck and sealed. Alkaline Grade Specifications Wt. Ratio of Na2O : SiO2 1:1.7 to 2.8 Specific Gravity : 38 to 60o Be Total Soluble Solids : 34 to 55% Na2O : 9 to 18% SiO2 : 25 to 37% Neutral Grade Specifications Wt. Ratio of Na2O : SiO2 1:2.9 to 3.3 Specific Gravity : 20 to 42o Be Total Soluble Solids : 18 to 39% Na2O : 4 to 10% SiO2 : 12 to 30% Uses In making of colloidal silica Detergent / Cleaning Compounds Pulp and Paper Paper Board Building Products / Construction Textiles Ceramics Petroleum Processing Metals We also manufacture Sodium Silicate Liquid as per customer specifications for Minimum Quantity of 20 Metric Tonnes Sodium Silicate Glass Sodium Silicate Glass is light blue colored crystalline solid which finds application for ceramic, adhesive, & silica gel producing industries. It is water soluble in nature and is completely suitable for use in drilling industry. This silicate glass serves as binder for vermiculite & perlite in refractory sector and shows good high temperature stability. In combination with magnesium silicate, it is used in fitting paste and for muffler repair purpose Chemical Compound : Alkaline Grade Appearance : Transparent low melting glass pH (5% Aqus soln) 11 to 12 pH Na2O 31.2% + 0.5% SiO2 68.7% + 0.5% Total Solid 99.99 + 0.1% Ratio 1:2.20 (Wt Ratio ) + 0.1% Iron Content 250 ppm + 100 ppm Un melted Sand 1% + 0.2% Neutral Grade Specifications Chemical Compound Neutral Grade Appearance Transparent low melting glass pH (5% Aqus soln) 11 to 12 pH Na2O 23.2% + 0.5% SiO2 76.7% + 0.5% Total Solid 99.9% + 0.5% Ratio 1:3.30(Wt Ratio) + 0.1 Iron Content 250 ppm + 100 ppm Un melted Sand 1 % + 0.2 % Specifications Purity : 99.99% Grade Standard : Industrial Grade,Industrial Grade Form : Powder Packaging Type : Packet
Marble Polishing Machine 1. Main function and characteristic Multihead stone polishing machine machine with 9-12-16-18 heads, this machine is mainly for slab polishing. the struture is reasonable, steady performance, high work effiency. With the import PLC controlling systerm, text display is controlled intelligence. 1.Out airbag, long life using, lower hazard rate, lower maintenance cost, etc advantage. 2. With the best quality belt with famous brand, thickness accord, promise the thickness of the slab. 3. Belt move and bridge move is controlled with the automatic controlling system 4. With lower power (7.5kw single head), lower cost, Capacity is 38 square meter per hour. The brightness for G3786 can catch up 85 degree. 5.The control system of this machine adopts PLC terminal control with LCD touch screen terminal for parameter setting and faulte prompts during operationm etc. It is applicable to continuours grounding and polishing granite tile. Operating speeds of plate coverying and crossbeam of polishing disc are controlled by frequency converter. working pleasure and the polishing width of tile are adjustable within the setting values. This machine can also automatically identify the shape of tile, so that each polishing disc (polishing head) could automatically lift and lower according to the identified shape of tile, and conduct tracking records for tile polishing at the same time. The overall machine is produced according the standard requirements with performance up to the leading domestic level. 6. All the electrical parts adopt famous brand, the PLC is Siemens and other electrical parts mainly are Schneider, so these can ensure the machine’s stability and long-term working. ? Technical data Processing width Max 900mm,1300mm Processing thickness Max30mm Grinding Heads 9/12/16 Capacity: 300-500 square meter per 8hours Grinding head power 9/12/16/18x7.5kw Belt move power 1.5kw Bridge move power 3kw Belt move speed 600-2200mm/min Pressure: 0.6-0.8Mpa Cooling water pressure in 0.15Mpa Consumption water for single grinding 25L/min Machine size 7500*2200*2100mm/9600*2200*2100mm,/10800*2200*2100mm
Multihead Stone Polishing Machine 1. Main function and characteristic Multihead stone polishing machine machine with 9-12-16-18 heads, this machine is mainly for slab polishing. the struture is reasonable, steady performance, high work effiency. With the import PLC controlling systerm, text display is controlled intelligence. 1.Out airbag, long life using, lower hazard rate, lower maintenance cost, etc advantage. 2. With the best quality belt with famous brand, thickness accord, promise the thickness of the slab. 3. Belt move and bridge move is controlled with the automatic controlling system 4. With lower power (7.5kw single head), lower cost, Capacity is 38 square meter per hour. The brightness for G3786 can catch up 85 degree. 5.The control system of this machine adopts PLC terminal control with LCD touch screen terminal for parameter setting and faulte prompts during operationm etc. It is applicable to continuours grounding and polishing granite tile. Operating speeds of plate coverying and crossbeam of polishing disc are controlled by frequency converter. working pleasure and the polishing width of tile are adjustable within the setting values. This machine can also automatically identify the shape of tile, so that each polishing disc (polishing head) could automatically lift and lower according to the identified shape of tile, and conduct tracking records for tile polishing at the same time. The overall machine is produced according the standard requirements with performance up to the leading domestic level. 6. All the electrical parts adopt famous brand, the PLC is Siemens and other electrical parts mainly are Schneider, so these can ensure the machine’s stability and long-term working. ? Technical data Processing width Max 900mm,1300mm Processing thickness Max30mm Grinding Heads 9/12/16 Capacity: 300-500 square meter per 8hours Grinding head power 9/12/16/18x7.5kw Belt move power 1.5kw Bridge move power 3kw Belt move speed 600-2200mm/min Pressure: 0.6-0.8Mpa Cooling water pressure in 0.15Mpa Consumption water for single grinding 25L/min Machine size 7500*2200*2100mm/9600*2200*2100mm,/10800*2200*2100mm
Specification Size 39*56*12mm Working voltage dc:6~30v Input fuse 2a Working temperature -40~85 Humidity 10% to 90% Cpu mt6223(52mhz) Gsm module Band:850/900/1800/1900mhz Tally with: gsm phase 2/2+ -class 4 (2w @ 850/900mhz) -class 1 (1w @ 1800/1900mhz) Gprs multi-slot class 12 Gprs mobile station class b Max rf output: 33.0dbm2dbm Dynamic input range: -15 ~ -102dbm Receiving delicacy: class rber2%(-105dbm) Frequency stability: > 2.5ppm Max frequency deviation: 0.1ppm Rms deviation:5deg Gps module Gps chip set: jrc g591b Frequency: l1, 1575.42 mhz Number of channel: 22 Gps sensitivity:-164dbm Positioning accuracy: 2.5m Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s I/o port 4 i/o cables 1. Positive 6v-30v. Red wire 2. Negative. Black wire 3. Remote cut off engine power. Yellow wire 4. Acc, engine start detecting. Green wire Current Standby current:16ma Working current:60~150ma Charging current: max
Potato flakes Free flowing potato flakes are produced from good quality potatoes after washing, peeling, inspection, slicing, precooking, cooling, cooking, drying and flaking to provide the size specification of the customer. The Size of the Potatoes been used is between 40 and 90 MM Dry Matter Content > 20% Foreign Material: Free of Foreign Material. Storage Temperature: 4-6 Degrees Celsius Flakes: Flakes are produced according to the specification of the client. Mostly the specifications of Standard Flakes are more or less the same over the world. Color: Normal Potato color Taste: Normal Potato Taste Texture: Not Slimy Not Sticky Reconstitution: When 100 GR. of whole flakes are reconstituted by hand stirring in 570 ml water at a temperature of 75 degree C, the product shall be non-glutinous, fluffy mass, resembling mashed potatoes and possessing the characteristic flavor of potatoes. Odor: Characteristic of Potatoes, free from typical odor. Flavor: Characteristic of Potatoes, free from taint. Defects: Black Points : 10 per 100 Gram Max Wet points : None Hard points : 15 per 100 Gram Max Additives/Chemical Characteristics: Moisture : 6% - 9% Monoglyceride emulsifier : 0.5% Max Sodium Pyrophosphate (% appr.) : 200 PPM Citric Acid Monoglyceride : 125 PPM Sulfur Dioxide (ppm appr.) : 100 PPM Antioxidant (ppm appr.) : 25 PPM Granulometri: Flaker with 6 MM Sieve > 2 MM : 57% Max < 2 and >1 MM : 32% Max < 1 MM : 11% Max Density: Flaker with 6 MM Sieve: circa 210 Gram / liter Stability: 120-140 MM Reducing Sugars: < 3% (Luft- Schoorl Method) Viscosity: Mpas/s (Brookfield Method) Particle Size: > 1000mu : 0% > 75 mu : 90% Bulk density : 65ªgr./1= 20gr./1 Metal detection: Metal detection is carried out on each bag of finished product. Microbiological Standards: Counter Plate : max. 10,000 Coliform :
It has the advantages of low loss and high saturation magnetic flux density and is widely used in power transformers, high frequency inductors, reactors and other components. Performance features: Convenient for coil assembling Excellence in anti-DC bias With high permeability and low coercivity, it can improve efficiency of the device, reduce the size; With low-loss, it can reduce temperature rise. Good temperature stability enables it work for a long time at temperature of -50 ~ 130oC . Product specifications and typical properties: No. Code a b c d e f Le Ae M VOL Wa WaAe (mm) (mm) (mm) (mm) (mm) (mm) (cm) (cm2) (g) (cm3) (cm2) (cm4) 1 YK01CC-6.3 10¡À0.5 11 33 20+0.5 31+1 53+2 13.1 1.59 150 20.9 3.6 5.8 2 YK01CC-8 11¡À0.8 13 30 20+0.5 35+1 52+2 13.2 1.79 170 23.7 3.9 7 3 YK01CC-10 11¡À0.8 13 40 20+0.5 35+1 62+2 15.4 1.81 200 27.9 5.2 9.4 4 YK01CC-16A 11¡À0.8 13 40 25+0.5 35+1 62+2 15.1 2.31 250 34.8 5.2 12 5 YK01CC-16B 11¡À0.8 13 50 25+0.5 35+1 72+2 16.9 2.31 280 38 6.5 15 6 YK01CC-20 11¡À0.8 13 50 30+0.5 35+1 72+2 17.5 2.71 340 47.4 6.5 17.6 7 YK01CC-25 13¡À0.8 15 56 25+0.5 41+1 82+2 19.6 2.7 380 52.9 8.4 22.7 8 YK01CC-32 13¡À0.8 15 56 30+0.5 41+1 82+2 20 3.2 460 64.1 8.4 26.9 9 YK01CC-40 13¡À0.8 15 56 35+0.5 41+1 82+2 19.9 3.71 530 73.8 8.4 31.2 10 YK01CC-50 16¡À1 20 70 25+0.5 52+1 102+3 24.9 3.3 590 82.2 14 46.2 11 YK01CC-63 16¡À1 20 70 30+0.5 52+1 102+3 25.3 3.91 710 98.9 14 54.7 12 YK01CC-80 16¡À1 20 70 40+1 52+1 102+3 25.4 5.21 950 132 14 72.9 13 YK01CC-100 16¡À1 20 70 45+1 52+1 102+3 25 5.91 1060 148 14 82.7 14 YK01CC-125 19¡À1 25 83 35+1 63+1 121+3 30.2 5.4 1170 163 20.8 112 15 YK01CC-160 19¡À1 25 83 40+1 63+1 121+3 28.5 6.5 1330 185 20.8 135 16 YK01CC-200 19¡À1 25 83 50+1 63+1 121+3 29.8 7.81 1670 233 20.8 162 17 YK01CC-250 19¡À1 25 90 60+1 63+1 128+3 31.4 9.31 2100 292 22.5 210 18 YK01CC-320 22¡À1 35 85 50+1 79+1 129+4 32.5 9.3 2170 302 29.8 277 19 YK01CC-400 22¡À1 35 85 65+1 79+1 129+4 33.6 11.7 2820 393 29.8 348 20 YK01CC-500 25¡À1 40 85 55+1 90+1 135+4 35.6 11.3 2900 404 34 386 21 YK01CC-630 25¡À1 40 85 70+1 90+1 135+4 35.6 14.4 3670 511 34 488 22 YK01CC-800A 25¡À1 40 85 85¡À1.5 90+1 135+4 35.6 17.4 4450 620 34 592 23 YK01CC-800B 30¡À1 40 95 85¡À1.5 100+1 155+4 39.3 21 5930 826 38 799 24 YK01CC-1000 33¡À1 40 105 85¡À1.5 106+1 171+5 42.7 23 7060 983 42 967 25 YK02CC-1 22¡À1 36 80 20¡À0.5 80+1 124+3 32 3.6 780 115 28.8 103.7 26 YK02CC-2 26¡À1 36 85 25¡À0.5 88+1 137+4 34.6 5.33 1230 184 30.6 163 27 YK02CC-3 33¡À1 49 113 40¡À0.5 115+1 179+5 45.6 10.8 3307 492.5 55.4 598 wooden case+carton box.
AE-270/450 polycrystalline silicon ingot furnace adopts various kinds of new technologies, and with the advantages of a larger loading and a higher productivity. The adoption of special ceramic fiber and the double safety protection design of graphite hard felt will guarantee that the emergency measures for silicon leakage can be started promptly with the automatic induction system of silicon leakage. The excellent safety performance of this furnace can reduce the potential accidents greatly. The heating system with high performance can guarantee the uniformity and consistency of silicon during the crystallization process. The operation process adopts PLC control, high-speed microprocessor testing and processing elements, dynamic detecting and high-speed response, and it has realized the automatic control and data exchange in the whole process. Therefore, this furnace takes the advantages of high efficiency, high stability, high reliability and good anti-jamming. What¡¯s more, its control system is equipped with single-phase UPS devices, which can reduce the loss coursed by instant power interruptions. Polycrystalline silicon ingot furnace is an important production equipment in the field that generates electricity though solar photovoltaic, it is also a kind of polycrystalline silicon ingot casting equipment which is developed to meet the needs of solar battery market. Putting the materials such as polycrystalline silicon pieces, end-wastage, crucible base material and various kinds of mono-crystal waste pieces into the quartz crucible of the furnace, and after the relevant process of melting, re-directed crystallization and annealing, it can cast the preliminary raw material of solar battery, what we called polycrystalline silicon ingots. Technical parameters specifications AE500 AE800 Equipment size mm3 L3700 W4900 H5080 L3700 W4900 H5080 Silicon ingot size mm3 420kg:840 840 270480kg:840 840 300 650kg:1000 1000 280 700kg:1000 1000 300 Silicon ingot weight kg 420-480 650-700 Production cycle hr 52-54 60-62 Power distribution AC 380 10% V,200kVA,three-phase five-wire system,50Hz AC 38010% V,200KVA,three-phase five-wire system,50Hz Heating power kw 165 165 Heating consumption for single furnace kW/hr ‚2900(430kg) ‚4000(680kg) Silicon ingot consumption unit kW/hr ‚6.8‚6 Vacuum and other energy consumption kWh 350400 Max temperature 16001600 Max working temperature 1560 1560 Vacuum system Mechanical pump +Roots pump Mechanical pump +Roots pump Ultimate vacuum inside the furnace mbar 0.02 0.02 Leakage rate of system mbar¨Mhr 0.01 0.01 Evacuating time min38 38 Cooling water Flow:140LPM pressure:0.35-0.5MPa differential pressure:0.25MPa inlet temperature:21-30 Flow:140LPM pressure:0.35-0.5MPa differential pressure: 0.25MPa inlet temperature:21-31 Compressed air Mpa0.5-0.60.5-0.6 Process gas Flow:0-50LPM purity of air source:50ppm gas consumption of single furnace 70m3 pressure .4-0.6MPa Flow: 0-50LPM purity of air source 50ppm gas consumption of single furnace:100m3 pressure:0.4-0.7MPa Ambient temperature 540 40 Ambient humidity 65%65% Ground requirements Ground levelness: 5mm, load-bearing 2.5T/m2Ground levelness: 5mmload-bearing 2.5T/m3.
Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops HDPE/MDPE water supply pipe production line and gas pipe production line by itself. It has many features, such as: special structure, high degree automation, easy operation, continuous produce stable and reliably and so on. It is also applicable for high speed extrusion of PE,PP,PPR,PERT,ABS etc. Plastic Pipes produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. HDPE/MDPE pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine and overturning bracket. Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output. Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die. Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling. Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right. Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank. Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error. Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler. Main Technical Parameter: Model Pipe Diameter (mm) Extruder Speed (m/min) Max.Output (kg/h) Total Power (kw) Dimension L¡ÁW¡ÁH SRQG-63 Ø20-Ø63mm SJ-65¡Á30 1.5-12 120 65 30 ¡Á2.2 ¡Á2.5m SRQG-110 Ø20-Ø110mm SJ-90¡Á30 2-12 220 110 32 ¡Á2.2 ¡Á2.6m SRQG-160 Ø63-Ø160mm SJ-90¡Á30 1.3-6 300 150 32¡Á2.2 ¡Á2.8m SRQG-250 Ø75-Ø250mm SJ-90¡Á33 0.7-4 400 200 40 ¡Á2.2 ¡Á3m SRQG-315 Ø110-Ø315mm SJ-90¡Á33 0.5-3.5 400 200 40 ¡Á2.2 ¡Á3m SRQG-400 Ø160-Ø400mm SJ-120¡Á30 0.3-2.4 550 280 42 ¡Á2.2 ¡Á3m SRQG-500 Ø200-Ø500mm SJ-120¡Á30 0.3-1.9 700 360 42¡Á2.3 ¡Á3.5m SRQG-630 Ø315-Ø630mm SJ-120¡Á33 0.2-0.7 800 450 50 ¡Á2.3 ¡Á3.5m SRQG-800 Ø400-Ø800mm SJ-120¡Á33 0.1-0.6 1100 560 50¡Á2.5 ¡Á4m SRQG-1200 Ø630-Ø1200mm SJ-150¡Á33 0.05-0.5 1300 720 65¡Á3¡Á4.5m Suit for shippment.
Product: Heat Transfer 550 Description And Recommendation: Paraffinic mineral oils, having higher oxidation & thermal stability, recommended in conventional heat transfer systems. Viscometric / Consistency ISO VG 32 Standards Proprietory
Riya Designer WESTERN NX Fabric Details Top :- 100% Handloom Cotton & Stripes With Reyon Stripes Bottom - Sanskari Cotton Silk Total Design :- 05 Rate:- Rs.550+ Gst Extra Size;- M-38,L-40,Xl-42, Xxl-44
Product Name: - Fiesta Presents Kurtis Catalog Name: - Rang Priya Top Fabrics - Bsy Modal Smooth And Soft Work: - Full New Colourful Embroidery Ary Work, And Gota Patti Work Length. 46 Size - M (38),l (40), Xl(42), Xxl(44),3xl(46) Designs - 7pcs Indian Selling Price: - 425/- + Gst Extra
TEMO STAINLESS STEEL ELECTRODES E308L-16 Comply with: AWS E308L-16 Other Stainess Steel products Stainless Steel Welding Electrodes AWSChemical composition of deposited metal(%)Mechanical performance of deposited maetal CMnSiPSCrNiMoCuNb+TaRm (MPa)ReL (MPa)A (%)Akw ?J CJA172E307-160.0674.10.340.020.00320.19.91.120.12 650 38 CJA107E308-150.0621.210.40.0180.00319.79.50.150.12 620 45 CJA102E308-160.0480.870.650.020.003219.59.450.140.12 620 42 CJA002E308L-160.0210.720.620.020.00519.229.750.130.25 610 41 E308LT E308L-160.0231.720.530.0180.00518.410.60.130.15 610 43 CJA307E309-150.121.30.450.020.001824.513.10.10.02 600 39 CJA317E309Mo-150.090.850.450.020.00524.212.82.60.07 615 38 CJA302 E309-160.0851.210.630.020.00224.312.80.120.15 590 38 CJA312E309Mo-160.070.80.650.0230.00723.612.52.650.07 610 38 CJA062E309L-160.0210.920.630.0180.001224.112.90.120.15 580 40 CJA042E309LMo -160.0190.820.650.0180.00323.412.82.630.3 550 41 CJA407E310-150.151.420.480.0220.003527.220.80.30.23 600 38 CJA402E310-160.121.350.580.020.003226.521.50.320.12 605 40 CJA412E310Mo-160.081.450.420.0220.00526.820.72.230.07 610 40 CJA1002 E312-160.0181.530.580.0210.00630.59.60.150.15 780 24 CJA207E316-150.060.650.340.0180.00518.512.82.40.1 620 38 CJA202E316-160.0450.430.650.0250.00718.812.52.230.25 615 38 CJA022E316L-160.0210.650.620.020.00519.2212.752.230.25 620 37 E316LT E316L-160.0181.530.540.0180.004518.413.22.30.15 610 37 CJA242E317-160.060.820.680.0180.00519.6513.423.430.25 610 40 CJA032E317L-160.020.720.70.020.004219.413.13.250.25 590 42 CJA212E318-160.0450.430.650.0250.00718.812.52.230.250.45640 35 CJA137E347-150.0641.20.340.020.00320.19.90.120.120.65630 38 CJA132E347-160.0510.850.680.0250.00319.89.60.120.150.62610 40 C 207E410-150.0830.210.480.0220.001312.80.320.150.23 615 23 C 202E410-160.0720.230.340.0290.0015130.160.190.26 610 23 C 307E430-150.0640.530.680.0180.00317.220.180.130.35 560 22 C 302E430-160.0640.530.680.0180.00317.220.180.130.35 560 22 E2209E2209-160.0181.530.580.0210.00622.58.63.20.150.15780 24
Best price hollow galvanized steel adjustable base scaffolding Details of vertical screw jack 1. Vertical screw jack are made up of q235 hollow steel which consists of cast iron nut , metal sheet base plate and steel screw bar. 2. Vertical screw jack are easy to assemble and dismantle which can help you to save construction time and cost. 3. The co2 electrical arc welding guarantee the welding part of vertical screw jack is very sturdy and strong. 4. Vertical screw jack is ofthen used to support the scaffolding system. 5. There are many kinds of vertical screw jack you can choose in our factory. Name length/mm diameter/mm plate/mm Solid jack base 550/600/700 30/32/34 120*120*5 Hollow jack base 550/600/700 38/48 150*150*6 Solid u-head jack 550/600/700 30/32/34 120 x 100 x 45 x 4 Hollow u-head jack 550/600/700 38/48 150x 150x 50x 6
Best Price Hollow Galvanized Steel Adjustable Base Scaffolding Details of vertical screw jack 1. Vertical screw jack are made up of Q235 hollow steel which consists of cast iron nut ,metal sheet base plate and steel screw bar. 2. Vertical screw jack are easy to assemble and dismantle which can help you to save construction time and cost. 3. The CO2 electrical arc welding guarantee the welding part of Vertical screw jack is very sturdy and strong. 4. Vertical screw jack is ofthen used to support the scaffolding system. 5. There are many kinds of Vertical screw jack you can choose in our factory. Name Length/mm Diameter/mm Plate/mm Solid Jack Base 550/600/700 30/32/34 120*120*5 Hollow Jack Base 550/600/700 38/48 150*150*6 Solid U-head Jack 550/600/700 30/32/34 120 x 100 x 45 x 4 Hollow U-head Jack 550/600/700 38/48 150x 150x 50x 6
MAN6L27/38 Diesel generator sets, HFO power station set, Power plant EPC, 60hz 720rpm 690kv 1900kw Can be used in Marine generator set, land power station MAN 6L27/38 technical specification: Diesel engine model MAN 6L27/38 number of cylinders 6 Diameter of cylinders 270mm Travel length of piston 380mm Rotate speed 720rpm Diesel engine power 1980kw Generator set power 1900kw Generator set type HYUNDAI HFJ7710-10P HZ 60hz Voltage 690v POWER FACTOR lag 0.9 manufacturer DOOSAN MAN impower/ Korea Manufacture date 2020 Dimensions 7557*3712*2570mm Weight dry weight 44500kg
Machine Capacity 40/50mm 38 HD 38mm LD 25mm MD 25mm MD 25mm LD 20/200 DRILLING (C.I.) 45 38 38 38 25 25 20 DRILLING (M.S.) 40 38 38 35 25 25 20 TAPPING CAP 25 20 15 20 15 15 10 DRILLING HEAD TAPPER SPINDLE MT-4 MT-4 MT-4 MT-3 MT-3 MT-3 MT-2 Quil Movement 240 240 230 240 175 155 120 SPEEDS No. Range of Spindle 8 8 8 8 8 8 8 Spindle Speed Min. /Max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 130 to 2600 80 to 3500 FEEDS No. Range of Feed Manual Manual Manual Manual Manual Manual Manual WORKING RANGE Dist. From Spindle Center to Column Face 350 300 280 250 250 230 200 Max. Dist. From Spindle to Base Plte 1030 1000 940 940 970 1050 900 Max. Dist. From Spindle to Work table 550 530 530 530 530 680 650 WORKING TABLE Table Diameter 485*485 422*422 380*380 370 Round 325*325 310*310 250*250 Baste Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800*525 680*430 630*405 630*405 580*365 370*550 480*310 No. of â??tâ?? Slots 2 2 2 2 2 2 2 POWER Drilling Motor 2HP 960 RPM 1.5 HP 1400 RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1440RPM 0.5 HP 1400RPM WEIGHT( Kgs.) Approximate 550 kg 375 kg. 300 kg. 275 kg. 225 KG. 185 KG. 110 KG V-BELT No. B-71 B-59 B-56 B-52 B-52 B-49 A-44
Approx. Price: Rs 550 / Piece Product Details: Minimum Order Quantity : 5 Piece Size/Dimension : 38/40/42/44mm Material : Genuine leather Packaging Type : Box Color : All colors available Brand : Apple Watch Straps Feature : Soft Leather Strap Type : Basic Usage/Application : Casual / Fashion Apple Watch BandS With Blue , White , Red And Black In colours With Best Quality And Affordable Price. Additional Information: Item Code: 9000 Production Capacity: 100 Delivery Time: 2 to 3 working days Packaging Details: box
Rotary piling rig xr180dii Product description Features It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability; It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost; Cummins electric control turbo-supercharged engine is used. It complies with euro iii emission standard , in addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard; Using full electronic control technology of can bus, improves the reliability of the whole vehicle and simplify hydraulic line, fully reflects the people, machine, electricity and liquid integration; Winch-crowd and sleeve-driven functions are available for selection to , �cfa, hydraulic casing oscillator, dth hammer satisfy various needs of the users; It is equipped with a centralized lubrication system as standard configuration; maintenance is easier; The machine obtains c e certfication of t, v rheinland group. Enginemodelc ummins qsb6.7-c260 Rated powerkw194 Rotary drivemax. Output torquekn . M180 Rotary speedr/min6~33 Max. Drilling diametermmï¿ 1600 Max. Drilling depthm60 Crowd , �cylindermax. Pull-down piston pushkn, �160 Max. Pull-down piston pullkn, �180 Max. Pull-down piston stokem, �5 Crowd winchmax. Pull-down piston pushkn210 Max. Pull-down piston pullkn210 Max. Pull-down piston stokem13 Main winchmax. Pulling forcekn180 Max. Line speedm/min65 Auxiliary winchmax. Pulling forcekn50 Max. Line speedm/min70 Mast rake side/forwards/backwards, �3, �/5, �/15, � Undercarriagemax. Traveling speedkm/h1.5 Max. Grade ability%35 Min. Clearancemm350 Track shoe widthmm700 Distance between tracksmm2960~4200 Hydraulic systemworking pressurempa35 Overall drilling weightt63 Dimensionworking conditionmm8350x4200x20480 Transportation conditionmm14380x3000x3490
Rotary Piling Rig XR400 Foundation Machinery It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability. The main hydraulic system adopts the negative flow control, and adopts the main power control and limit power control together which can increase the system efficiency and make the most of the engine power. It adopt three-in-one colling system which is tightly packed and has a high-effeciency in cooling. Imported Cummins electric control turbo-supercharged engine is used. It complies with Euro III emission standard ,In addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard.  It adopts the luffing mechanism of large triangle form to ensure the stability of construction of big holes and deep piles in hard formation.  It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost.  Normal mode and entering-rock mode of unit head are available for operation in soil and rock to improve the construction efficiency.  Winch-pressurize d and sleeve-driven functions are available for selection to satisfy various needs of the users. It is equipped with a centralized lubrication system as standard configuration; maintenance is easy. Engine Model CUMMINS QSX15-C500 Rated power kW 373 Rotary drive Max. Output torque KN . m 400 Rotary speed r/min 7~25 Max. Drilling diameter mm ï¿ 2500 Max. Drilling depth m  92 Crowd  cylinder Max. Pull-down piston push kN 240 Max. Pull-down piston pull kN 250 Max. Pull-down piston stoke m 6 Crowd winch Max. Pull-down piston push kN 400 Max. Pull-down piston pull kN 400 Max. Pull-down piston stoke 18 Main winch Max. Pulling force kN 360 Max. Line speed m/min 60 Auxiliary winch Max. Pulling force kN 100 Max. Line speed m/min 65 Mast rake side/forwards/backwards 4°/5°/15° Undercarriage Max. Traveling speed Km/h 1.3 Max. Grade ability % 35 Min. clearance mm 450 Track shoe width mm 800 Distance between tracks mm 4700~5200 Hydraulic system Working pressure Mpa 35 Overall drilling weight t 113 Dimension Working condition mm 10995x4900x26640 Transportation condition mm 20755x3500x3910
Symons cone crusher in Shunda can be widely used in metallurgical industry, construction industry, road building industry, chemical industry and silicate industry, suitable for crushing hard and medium-hard ores and rocks, such as iron ore, copper ore, limestone, quartz, granite, sandstone. Symons cone crusher is mainly formed by eccentric shaft, rack, drive, empty, bowl bearing, breaking cone, adjusting device, adjusting sleeve, spring, dilute petrol station and hydraulic station which can adjust the output size. Shunda Symons cone crusher has the advantage of reliable structure, high production efficiency, easy adjustment, using economically, effectively reduce the piece rate and so on. Model Breaking diameter (mm) Cavity type Closing side of feed port(mm) Opening side of feed port(mm) Minimum discharge open (mm) Main motor power(kw) Discharge Outletsize (mm) Capacity (t/h) PYS-B0910 3(914) Fine 83 102 10 75 10-22 45-91 PYS-B0917 Rough 159 175 13 13-38 59-163 PYS-B0918 Extra rough 163 178 25 25-38 118-163 PYS-D0904 Fine 13 41 3 3-13 27-90 PYS-D0906 Rough 33 60 3 3-16 27-100 PYS-D0907 Extra rough 51 76 6 6-19 59-127 PYS-B1313 4 1/4 (1295) Fine 109 137 13 155 13-31 109-180 PYS-B1321 intermediate 188 210 16 16-38 130-20 PYS-B1324 Rough 216 241 19 19-51 170-350 PYS-B1325 Extra rough 238 259 25 25-51 236-360 PYS-D1306 Fine 29 64 5 5-16 50-160 PYS-D1308 intermediate 54 89 6 6-16 74-160 PYS-D1310 Rough 70 105 10 10-25 98-215 PYS-D1313 Extra rough 98 133 19 19-25 180-225 PYS-B1620 5 1/2 (1676) Fine 188 209 16 240 16-38 181-327 PYS-B1624 intermediate 213 241 22 22-51 258-417 PYS-B1626 Rough 241 269 25 25-64 300-635 PYS-B1636 Extra rough 331 368 38 38-64 431-630 PYS-D1607 Fine 35 70 6 6-13 100-209 PYS-D1608 intermediate 54 89 6 6-19 136-310 PYS-D1613 Rough 98 133 10 10-25 190-336 PYS-D1614 Extra rough 117 158 13 13-25 253-336 PYS-BC2127 7 (2134) Fine 253 278 19 400/450 19-38 540-800 PYS-BC2133 intermediate 303 334 25 25-51 670-1100 PYS-BC2136 Rough 334 369 31 31-64 870-1400 PYS-BC2146 Extra rough 425 460 38 38-64 970-1500 PYS-DC2110 Fine 51 105 6 6-16 300-450 PYS-DC2113 intermediate 95 133 10 10-19 390-560 PYS-DC2117 Rough 127 178 13 13-25 500-660 PYS-DC2120 Extra rough 152 203 16 16-25 560-720
