Product material: galvanized steel band Product property: high quality steel, making the thickness of the national standard, with ultra-soft and good bending properties, internal smoothness lead wires in a very easy to wear. Application: used for the wire/cable protection for machines, mansions and factory buildings. Provide insulation for wires/cables protected. Besides, the cable's bending and beautiful outlook can be ensured. How to use: put the wires/cables through the pipes before fitting correspondent type of lne-dpj joints. Item no. Specifications outer diameter And tolerance (mm) natural curve (mm) max. Axial pull (kg) packaging unit (m) Metric g system Lne-js-6
This kind of product is made of aisi4145h alloy steel, mainly used between dill collar and dill pipe to ease transition stress concentration between dill collar and drill pipe and reduce the rate between contact area and outer wall wear. To avoid the wear and tear of dill pipe we add each 101m wide belt wear at the top and bottom of follow-welded joint and review 76m wide belt wear on the thickening of the central part of the governing body. To extend its life cycle we can also paint dpc spraying anti-corrosion coatings in the dill pipe wall. If order or inquiry please offer: 18pshoulder chamfer 90pshoulder chamfer It need to be discussed
A needle roller bearing is a bearing which uses small cylindrical rollers.The difference of a needle roller bearing and roller bearing is the ratio of diameter and length of their rollers, when the ratio of the diameter and the length of roller of a roller bearing is between the interval of 0.4 to 0.1, that roller bearing is called as needle roller bearing. They are used to reduce friction of a rotating surface. Needle bearings have a large surface area that is in contact with the bearing outer surfaces compared to ball bearings. Additionally there is less added clearance so they are much more compact. The typical structure consists of a needle cage which orients and contains the needle rollers, the needle rollers themselves, and an outer race Needle bearings are heavily used in automobile components such as rocker arm pivots, pumps, compressors, and transmissions. The drive shaft of a rear-wheel drive vehicle typically has at least eight needle bearings (four in each U joint) and often more if it is particularly long, or operates on steep slopes.
Product material: (inner layer) adopting galvanized steel band with special insulation treatment (outer layer) adopting pvc raw material (anti-uv, anti-aging) Working temperature: -10¡æ ~ £«80¡æ Structure: 1. The flexible pipes have extremely good waterproof, insulating and pull resistance. 2. The thickened surface is made of pvc. The surface is smooth. The pvc plastic is added with fire retarding agent. 3.The structure is buckle structure, which enhances the pull resistance and is not liable to crack or deform.< Application: used forwire protection at railways, engines, trafficsystem engineering, air-conditioners, various machineries, power plants, chemical industries, power distribution system, communication system, vessels, mansions, factory buildings as well as the outdoors' exposed locations. Usage: protecting wires/cables and provide insulation and waterproofing performance. How to use: put the wires/cables through the pipes before fitting correspondent type of lne-dpj joints. Item no. Specifications outer diameter And tolerance (mm) natural curve (mm) max. Axial pull (kg) packaging unit (m) Metric g system Lne-jsp-10
Acoustic pipe is the only specialized application in ultrasonic testing of reliable system in the market. Is the use of cold hard tube professional forming, use clamp pressure connection, spiral connection, flange connection means such as, in the concrete casting is reliable anti-seepage effect. The finished product usually include ultrasonic has standard length of steel tube and forming a method of connecting joint connection. Can reserve a channel make detection head can direct to the bottom of the pile foundation Double side double sealing clamp pressure acoustic pipe designed two convex chamfer on the female end, convex slot with the sealing ring, installations will this product of the pile into the socket mouth, then using special hydraulic clamp to both a convex slot extrusion and squeezed parts of the stress pipe after contraction deformation, two convex slot of deep into outer pipe between inner pipe material, thus effectively realized this product reliable connection: rubber sealing ring in the material also is extruded deformation stick take in two layer between the pipe played a good sealing function of insurance. Single head double clamp pressure acoustic pipe Single head double sealing clamp pressure acoustic sound at the end of the pipe joint welding in a molding of the pipe sound, another sound the tube into the groove of joints double entry, through the hydraulic pressure meet clamp force under pressure, make the pipe sound and joint firmly together. Pipe joint in the middle section has a double sealing ring, so can make the pipe sound more seal, use this warhead welding clamp pressure type of acoustic detecting tube fittings, only a clamp pressure can. Clamp Pressure Acoustic Pipe Specifications type of 50 type of 54 type of 57 50*0.8 54*1.0 57*1.0 50*0.9 54*1.1 57*1.1 50*1.0 54*1.2 57*1.2 50*1.1 54*1.3 57*1.3 50*1.2 54*1.4 57*1.4 50*1.3 54*1.5 57*1.5 50*1.4 54*1.6 57*1.6 50*1.5 54*1.7 57*1.7 50*1.6 54*1.8 57*1.8 50*1.7 50*1.8
Thread Rubber Expansion Joint JGD-B Thread Rubber expansion Joint Rubber Jointhas the characteristics of good sealing, light weighting, easy to fix and maintain, also has long working expecting, but please keep far away from sharp metal in order to avoid breaking the rubber body. Equipped with the excellent comprehensive performances of rubber expansion bellows, thread rubber bellows can be used for lift and transportation of raw water and sewarubberge, transportation of water supply, cooling cycle water of thermal power plant, condensate water of metallurgy industry and chemical materials of chemical industries, cooling and dilution of oil and chemical industries and flexible connection of other industries. It is also suitable to transport all grain and powder material and gas for its high abrasive resistance. Due to its good integral function, flexible rubber joint is used widely in key projects of chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, health, fireproof and power, etc. Rubber Bellows Joints: 1, Versatile hand-built construction. Made in China 2, Absorbs directional movement 3, Absorbs vibration, noise and shock 4, Compensates for expansion 5, Wide flowing arch design 6, Virtually eliminates sediment buildup 7, Economical fully molded construction 8, High vacuum rating (up to 30" Hg) can be supplied for certain sizes 9, Special grooved flange ring design, prevent rubber end pulling out 10, Solid galvanized steel floating flanges speed the installation time 11, High tensile aircraft cable is embedded in the raised face rubber ends to prevent pull out and avoids the sharp cutting edge of solid steel rings 12, No gaskets required; integrally rubber flanged design, no gaskets required, DIN PN10/16 drilling standard, other flange drilling available, including ANSI 150lb/300 lb, BS, and JIS No. Part Material 1 Body NR, CR, IIR, NBR, FKM, EPDM 2 Inner & Outer Rubber NR CR IIR NR FKM EPDM PTFE 3 Body Carcass Nylon cord fabric 4 Reinforcing Ring Multi-strand coppering steel wire 5 threaded union rubber joint Cast and forged carbon steel(Q235), Stainless steel(201, 304, 316, 321), Plastic(CPVC, PVDF, PPH, UPVC, RPP)
I and basic parameters: Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire. Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) - Gap: 0.1 mm - 35mm deviation: + 0.05 mm standard length: 50-6000mm End connections: silk buckle pipe head or direct pipe head Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc Torre bar specification: 3.8 mm / 22 root, 3.8 mm / 32 root, 3.8 mm / 48 root, 3.8 mm / 50 root. Special specifications on request (such as: in liquid, reflexed, etc.). II and features: 1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid 2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation. III, the properties of product: 1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable. 2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors. 3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering. I, product use Used for various pumping oil, gas and water Wells played sand protection, prolong production cycle pump function, improve productivity, wastewater treatment and chemical branch are available. II, structure characteristics Around the welding type stainless steel sieve tube is "V" type by large openings, 1Cr18Ni9Ti forming welded wire around the system, it is through control round wire the gaps between the role play sand control, around the welding stainless steel sieve tube with other types of sand control tube comparison, specific have higher flow capacity, high strength, corrosion resistance is out of shape not easily long life, safe and reliable, obvious effect, low cost, is a bit oil industry in the most effective sand control tools. III, technical parameters 1. Specifications Nominal size 2. Silk around width (gap) coefficient as follows: (units) mm: 0.1 0.15 0.20 0.25 0.30 0.35 0.40 0.45.50 0.75 1.00 1.25 3. Length factor as follows: (units) mm: 1000 1200 2000 4000 6000 IV, tie-in way Welded loop joint thread silk buckle joint flange joint V, sieve tube material Stainless steel wire low carbon steel wire galvanized steel wireVI, filtration method Inside filter outside filtering (evaginate reflexed round wire evaginate).
Single side butyl rubber wrap tape anti corrosion for gas pipe Outer Wrapping Tape The XUNDAT200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outerlayer tape backing shall be compounded so that it will be resistance to outdoor weathering.The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machineCorrosion protection tape for metal pipeline is polyethylene cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. Usage and Features: 1. Widely used on underground and overhead pipelines anticorrosion protection system. 2. Excellent adhesion to pipe and self 3. Resistant to UV 4. Can be applied over a wide temperature range from-30°C to 80°C 5. Good conformability and consistent uniform thickness 6. Cold applied ,and easily applied with no special equipment 7. Compatible with common pipe coatings 8. Excellent resistance to cathodic disbonding 9. Meets ASTM D 1000 Standard 10. Long term corrosion protection and mechanical resistance The tape consists of two layers, adhesive and film Inner layer: butyl rubber Outer layer: polyethylene Thickness: 0.35 - 1.30mm Width: 50-300mm Length: 30 - 200m Application 1 Rust Removal Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.2 PrimingPrimer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m². 3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.
I and basic parameters: Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire. Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) - Gap: 0.1 mm - 35mm deviation: + 0.05 mm Standard length: 50-6000mm End connections: silk buckle pipe head or direct pipe head Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc Torre bar specification: 3.8 mm / 22 root, 3.8 mm / 32 root, 3.8 mm / 48 root, 3.8 mm / 50 root Special specifications on request (such as: in liquid, reflexed, etc.). II and features: 1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid 2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation. III, the properties of product: 1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable. 2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors. 3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering. I, product use Used for various pumping oil, gas and water Wells played sand protection, prolong production cycle pump function, improve productivity, wastewater treatment and chemical branch are available. II, structure characteristics Around the welding type stainless steel sieve tube is "V" type by large openings, 1Cr18Ni9Ti forming welded wire around the system, it is through control round wire the gaps between the role play sand control, around the welding stainless steel sieve tube with other types of sand control tube comparison, specific have higher flow capacity, high strength, corrosion resistance is out of shape not easily long life, safe and reliable, obvious effect, low cost, is a bit oil industry in the most effective sand control tools. III, technical parameters
Features of Vertical Series Bulk Storge Tank: 1.Inner Vessel: Austenite stainless steel material for cryogenic application with optimized design. 2.Outer Vessel: High-quality carbon steel outer with a combined leg and lifting lug system designed for safe transport, easy lifting and low cost installation. 3.Insulation: Specific inner structure design, a proven high quality pumping system and perfect detect device ensure good performance and long term vacuum performance , backed by a 3 years warranty on vacuum integrity 4.System of Valve and Pipe: Compact design of modular structure, pipe system of WOLVERINE. Compact structure, the pipe is shorter than 2/3 length of normal tank, maximum reduce the heat loss of outer pipe. A combination valve to reduce welded joints, lower cost and maintenance cost. Design pipe flow, valve and instrumentation to be in good position through ergonomic. Pipe system of full stainless steel is the reliability of long running Other valves, such as valve of stainless steel and threaded connection can be manufactured according to clientsí» requirements. Inner pipe design is calculated and checked by using related engineering procedures in USA, ensure the quality of product. 5.Pressure Adjust: An easily adjustable multifunction combination regulator, equipped with an aluminum auto-boosting dewar and booster of other types, including booster of high-out or lining stainless steel pipe, can be selected by customersí» requirements. 6.Instrumentation: High quality pressure gauge and differential pressure level gauge are standard with optional pressure/level indicator with remote transmission. 7.Safety: Tanks are equipped with dual relief valves with a variety of options, including additional relief valves and/or rupture discs. Easily accessible valves and safety relief valve outlets directed away from the operating area. 8.GB-150 Standard: Tanks are designed and manufactured according to China National Standard Pressure Vessels GB-150 and GB-18442. 9.Cryogenic Liquid Pump: When tank is output by using cryogenic liquid pump, it can use siphon pipe remodeling designú¼to make the pump in good working conditions. 10.Cleanliness: All tanks and their components are cleaned in accordance with requirements of liquid oxygen. 11.Outer Finish Surface Pretreatment : High grade of sandblasting and rust-removing, painting with standard durable corrosion resistant epoxy-polyurethane white paint. 12.Transport: Special rugged internal supports for safe transportation by road, rail or sea.
Products with good quality and lowest price, pls order it. Introductions 1. Material: superior pvc laminated on 6mm/8mm mdf, finger jointed fir wood as rails and stiles, mdf strips as infilling. 2. Accessories: high quality lock, handle, hinges. 3. Door size: 200x80x4cm(standard size), thickness:4cm or as required 4. Packing: Epe inside, plastic coner protector , strong carton outside. 5. ISO9001, ISO14001, CE , china famous brand certificate. 6. Loading capacity: 20gp: 220 sets, 40gp: 480 sets, 40hq:500 sets. 7. Moq: 50 sets. 8. Delivery time: 7-15days after deposit. 9. Payment term: T/T, L/C at sight. Advantages 10. Humidity: 8-12%. 11. High quality products with reasonable price. 12. Suitable for mass consumption. 13. Ecoc friendly, healthy product, formaldehyde, toluidine, radiated pollution, Water proof, easy to clean. 14. Good effect on sound insulation and heat insulation. 15. Protects against insects, damp-proof, firm, resists split, doesn't deform. 16. Computer control carved design. 17. Various designs & colors are available. Foam plastic inner, strong carton outer.
Technical Parament * Lamp Source: 50W/MR16/G5.3 * Material: stainless steel cover * Working Temperature: -25 ~ +50¦ C * Power of light source: 50W * Protection Degree: IP67 * Color available: White, warm-white, amber, red, blue, green * Input Voltage: 12V Connection:8mm alloycopper plating nickel connection joint PP outer casting available Features and characteristics 304#stainless steel housing 5mm toughened glass cover Bolt/nut is made of stainless Powder-sprayed with anti-ultraviolet function Anti-corrosion,acid and alkali Protection grade:IP67 Electrical Protection:class 1 Sincere Remarks The price is based on the mini order quantity for your reference,could be negotiable if you are interested in larger quantity Any specifications can be ordered.Free alternative items as follows:base,bean angle,voltage Price will be depended on the LED lighting source,light color,material and etc Packing:Stand exported carton,wooden box or pallet Payment term:T/T 30% deposit in advance,the balance should be paid before the shipment Lead time:7-10 days working days after receipt of payment Carton
Global overseas group corp., ltd had set up a joint venture company with sket pc strand factory since 1995, Specialized in producing and exporting pc strand to more than 40 countries as following: 1).Standard: astm a416, bs5896, jisg3536, iso6934, en10138, gb/t5224 or according to customers' requirements. 2).Size range (mm): 9.3, 9.53, 12.7, 15.0, 15.2, 15.24, 15.7 3) packing: export anti-rust packing with vapors corrosion inhibiting technology. Inquiry please provide: standard, diameter, mechanical property (especially tensile strength), quantity, destination port. For more info pls visit our website: www.Globalstrand.Com Kelly liang Global overseas group corp., ltd. Head office: Add: 5n, donghai int'l building, 17 huiquan rd, qingdao, p.R.China Tel: 0086-532-83875335/83894054/83887151/83869945 Fax: 0086-532-83875212 Email: global2003@vip.Sina.Com Factory: Add: jing wu wei si road, industrial park, apec yantai technology industrial zone of china Tel:0086-532-83867447/83868741/13356864881 Fax:0086-532-83869945 Email: info@globalstrand.Com Packing:in soft coils, water-proof paper inner, and hessian(or p.P) cloth outer
1. The frozen chicken PAWS grade A: CERTIFICATE: China (authorized plant number) Safe For Human Consumption Measures and weight chicken PAWS grade A: - WEIGHT: 35 grams or higher PER PIECE - AVERAGE LENGTH: 7-12 cm PER PIECE - Shelf Life: 24 months Appearance: - feather off, - washed and cleaned, - white skin (outer yellow skin off), - moisture content less than 3%, - no bad smells, - black spots less than 1%, - no bruise, - no excessive blood or blood stains, - broken bone less than 2%, - 100% fresh and Frozen. Frozen temperature: - STORAGE AT: MINUS 18 DEGREES CELSIUS. - TEMPERATURE DURING TRANSPORTATION: MINUS 18 DEGREES CELSIUS - STYLE: FROZEN - CERTIFICATION: HACCP, HALAL Packaging - CARTON LABEL: standard international labels accept by China Authorities and China Custom for frozen chicken - PACKING: PLASTIC BAGS Custom for frozen chicken - PACKAGING AND MARKING: standard cartoon - 5% more or less in quantity and amount allowed. 2. The frozen chicken MIDDLE JOINT WINGS grade A: CERTIFICATE: China (authorized plant number) SAFE FOR HUMAN CONSUMPTION Measures and weight chicken mid-joint wings: - WEIGHT: 30-45 grams or higher PER PIECE - AVERAGE LENGTH: 7-9 cm or higher PER PIECE - Shelf Life: 24 months Appearance: - clean, - no yellow skin, - no feathers, - no bad smell, - no blood, - no black pad, - no bruise, - no chemical burns, - no broken bones less than 1%, - moisture less than 1%, - pad retained and without damage. Frozen temperature: - STORAGE AT: MINUS 18 DEGREES CELSIUS. - TEMPERATURE DURING TRANSPORTATION: MINUS 18 DEGREES CELSIUS - STYLE: FROZEN - CERTIFICATION: HACCP, HALAL Packaging - CARTON LABEL: standard international labels accept by China Authorities and China Custom for frozen chicken - PACKING: PLASTIC BAGS Custom for frozen chicken - PACKAGING AND MARKING: standard cartoon - 5% more or less in quantity and amount allowed. 3. Frozen GRILLED WHOLE CHICKEN 1100 - 1200 grams 4. Frozen NAKED WHOLE CHICKEN 1100 - 1200 grams
Chicken PAW (Grade A) Specifications: 35g-45g, 10 cm-13cm each 100% - Clean - No Yellow Skin - No Feathers - No Bad Smell - No Blood - No Black Pad - No Bruise - No Chemical Burns- Broken Bones Less than 1% - Moisture Less than 3% Complete Chicken - In average size Frozen Requirement: Blasted at: -20CStorage at: minus 18 degrees Celsius. - During Transportation: minus 18-20C Chicken FEET (Grade A) Specification Frozen Chicken Feet, 100% Specifications: 45g-50g, 10cm-13cm each 100% - Clean - No Yellow Skin - No Feathers - No Bad Smell - No Blood - No Black Pad - No Bruise - No Chemical Burns- Broken Bones Less than 1% - Moisture Less than 3% Complete Chicken - In average size Frozen Requirement: Blasted at: -20CStorage at: minus 18 degrees Celsius. - During Transportation: minus 18-20C Frozen Chicken Wing Tip - Grade A Clean No Yellow Skin No Feathers No Bad Smell No Blood No Black Pad No Bruise No Chemical Burns Broken Bones Less than 1%. Moisture Less than 3%. Packaging : 15 & 20KGS or Customer's Preference Middle Join Wing Grade A Specification Frozen Chicken Middle joint wing, 100%) Specifications: 45g-50g, 10cm-13cm each 100% Clean No Yellow Skin No Feathers No Bad Smell No Blood No Black Pad No Bruise No Chemical Burns- Broken Bones Less than 1% Moisture Less than 3% Complete Chicken - In average size Frozen Requirement: Blasted at: -20CStorage at: minus 18 degrees Celsius. - During Transportation: minus 18-20C Chicken 3 Joint Wing Grade "A" Specification Frozen Chicken 3 joint wing. Specifications: 60g-90g. Clean No Yellow Skin No Feathers No Bad Smell No Blood No Black Pad No Bruise No Chemical Burns- Broken Bones Less than 1% Moisture Less than 3% Complete Chicken - In average size Frozen Requirement: Blasted at: -20CStorage at: minus 18 degrees Celsius. - During Transportation: minus 18-20C Chicken Leg Quarters Grade A Specifications: 600-800 grs each. White skin No broken bones Outer yellow skin off Well cleaned and fresh No bruises No black pads or ammonia burns No bad smells No excessive blood or blood stains Moisture content is less than 3% No excess water Blasted at: minus 40 degrees Celsius Storage at: minus 20 degrees Celsius. Temperature during Transportation: Minus 18 degrees Celsius Packing: 20kg per cartoon or Customers preference.
YOYIK�® TEMPERATURE SENSOR WZP2-221 Is a spare part for power plants. Deyang YOYIK specializes in producing all kinds of generating units supporting the processing of power plants, power plants, metallurgical systems, chemical systems, color systems, steel mills, chemical fertilizer plants, colored copper and aluminum processing plants, coking plants, oxygen plants and other industrial and mining enterprises , Including: rolling mill, compressor, circulating compressor, air compressor, steam turbine, high pressure pump ice machine, ball mill, coal mill, motor and other bearings, cross head, slide and other products. YOYIK strict promises, timely supply, in order to sincerity, refinement, durability, and trustworthy for the quality policy, only low-profit, user satisfaction, welcomed the new and old customers come to our factory. YOYIK provides multiple types of spare parts and equipments for power plant : #DF-TEMPERATURE SENSOR WZP2-221-DF Current Probe TM0110-A01-B10-C08-D10 Pressure Controller 9AG-EF45-N1-F1A Speed Sensor CS-2 STICK BOLT HEATER ZJ-20-8B LVDT HTD-250-3 LVDT Position Sensor W.10.A.0176 Gapmeasupe Probe GJCT-15-E LVDT Position Sensor C9231114 Speed Module DF2012 DETECTOR LEAK KQL1500 LVDT Position Sensor TD-1000 LVDT HTD-250-3 SWITCH PRESSURE RT200 Sensor DET-250A Pulse amplification module 3L8041-1 Rotation Speed Probe ZS-02 L=100 Bolt Electric Heater ZJ-20-7A LVDT Sensor TDZ-1D-03 LVDT Position Sensor HL-3-350-15 Low Resistance Probe CS-1(D-100-05-01) LVDT Position Sensor ZDET150A �¦14mm Current Sensor HTW-04-50/HTW-14-50 Rotation Speed Sensor 5100.W.10.A.0003 Bfp Speed Probe SZCB-01-00-060-00-05 LVDT DET100A LVDT Position Sensor TD-1 0-600 Hydrogen Leak Monitor NA1000D Probe CWY-DO-810508 BOLT HEATER ZJ-20-2 Double thermal resistance WZPM2-001, Pt100, L=50 TEMPERATURE SENSOR WZP2-221 Displacement sensor HTD-100-3 CPU module GES3000 PCA6743 LVDT DET100A steam turbine bolt heater ZJ-18-1270 Hydroturbine Guide Vane Feedback Sensor SWB-4 LINEAR VARIABLE DIFFERENTIAL TRANSFORMER DET200A LVDT Position Sensor TDZ-1-46 Sensor DET-800B Probe CWY-DO-811402 High Resistance Magnetoresistive Sensor CS-1(G-075-02-01) De-excitation Switch Opening Coil HSBA331433R0001 Signal Acquisition Card 3L4645 Travel switch L*19-001 DEH Rotation Speed Probe MP-988 Bending joint CA79860-24-00 TRANSFORMER, CURRENT LMZBT13-20 Limit switch LX19-001 Probe 21747-080-0 Rectifier Cabinet I/O Output Module ADAM-4068 LVDT Position Sensor HTD-400-6 LVDT Position Sensor TDZ-1-31 Pressure transmitter 3051GP3A2B21AB4M5 0-1MPa TEMPERATURE ELEMENT WZPK2-533 Pressure Switch RC778NZ090ZSS SENSOR, LVDT FOR MSV HL-6-250-15 Exciter Rectifier Cabinet Interface CIN Card 3BHB005922R0001 CV Servo Card FBMSSW steam turbine bolt heater ZJ-22-40 Rotation Speed Probe CS-3 M10*1 Sensor 10000TD 0-500mm TEMPERATURE SENSOR WZP2-221 DFYL-2020-4-20-DFMY
Sucker Rod Coupling is a joint for Sucker rod, used in oil well downhole for oil pumping and Production. Yunsheng sucker rod couplings are manufactured from high quality Alloy Steel AISI 5140, fully in accordance with API Spec 11B standard, including class SM coupling, class T coupling, Sub coupling, Full Size, Slim Hole and Over Size, and the thread size are available at 5/8â??, 3/4â??, 7/8â??, 1â?? and 1 1/8â??. SUCKER ROD COUPLING T, SM Nominal Size (in) Outer Diameter +0.13(+0.005)- 0.25(-0.010)(in/mm) Inner Diameter +0.13(+0.005)- 0.25(-0.010)(in/mm) Outer Size(in) O.D.*Length Weight (kg) Full Size 5/8" 1 1/2(38.10) 15/16(23.81) 1.500�?4.000 0.56 3/4" 1 5/8(41.28) 1 1/16(26.99) 1.625 4.000 0.62 7/8" 1 13/16(46.04) 1 3/16(30.16) 1.812�?4.000 0.75 1" 2 3/16(55.56) 1 3/8(34.93) 2.187�?4.000 1.15 1-1/8" 2 3/8(60.33) 1 9/16(39.69) 2.375�?4.500 1.45 Slim Hole 5/8" 1-1/4(31.8) 15/16(23.81) 1.250�?4.000 0.41 3/4" 1-1/2(38.1) 1 1/16(26.99) 1.500�?4.000 0.47 7/8" 1-5/8(41.3) 1 3/16(30.16) 1.625�?4.000 0.52 1" 2(50.8) 1 3/8(34.93) 2.000�?4.000 0.58
FRB Bearings CRU Cross Roller Ring's unique configuration results in an overall costs savings of up to 50%. Featuring mounting holes on both rings, the Type CRU requires reduced parts and labor. The simple design of the Type CRU consists of one-piece outer and inner ring construction, and requires no precise housing preparation or special fixturing. The FRB Bearings engineered design allows for easy installation with either inside or outside ring. The Type CRU's extremely rigid construction ensures highly accurate and ultra-smooth motion. Application examples using the Type CRU range from industrial robots to video arcade machines (virtual skiing game). Installed in robot joints, the Type CRU achieves incredibly precise rotary motion, allowing for reliable operation. In the arcade game example, the Type CRU provides smooth and true-to-life turning motion. The Type CRU is available in a range of sizes, from 20mm to 350 mm inner diameter and 70mm to 540mm outer diameter. Roller pitch circle diameters range from 41.5mm to 445.4mm. Here are some recommended product models: RU 42, RU 66, RU 85, RU 124, RU 124G, RU 124X, RU 148, RU 148G, RU 148X, RU 178, RU 178G, RU 178X, RU 228, RU 228G, RU 228X, RU 297, RU 297G, RU 297X, RU 445, RU 445G, RU 445X
The instrument is designed and made as per the National Standard GB/T387 ¡°Test Methods for Sulfur Content of Dark Petroleum Products (Tubular Oven Methods)¡±. It is suitable to determine sulfur content of dark petroleum products. Place sample in a quartz boat and completely burn sample in the high temperature air at a stipulated flow rate. Absorb sulfurous anhydride and sulfuric anhydride produced from combustion using peroxide and sulfuric solution. Then make titration for sulfuric acid produced using sodium hydroxide solution. Technical characteristics 1. The instrument is mainly composed of tubular oven, oven temperature controller, flow meter, and display. 2. Adopt microprocessor to form the intelligent controlling system, it can control determination time, oven movement, and alarm system automatically. 3. After preset oven moving mode, the oven can move, stop moving and return back to initial state automatically as per the requirement of test procedures. 4. It has two parallel tubular ovens in horizontal type, so it can make determination for 2 samples at the same time. It is efficient, accurate and reliable. 5. Equipped with air source and a joint for outer air source, so you can use inner air source of the instrument or outer air source. Technical parameters 1. Power supply: AC 220V¡À10%, 50Hz 2. Type and quantity of heating oven: parallel tubular ovens in horizontal type 3. Chamber diameter of oven: ¦µ22mm 4. Heating power of oven: 1400W¡Á2 5. Max. Temperature of oven: 950¡æ 6. Moving distance of oven: not less than 135 mm 7. Air flow rate: not less than 150 L/h 8. Max. Preset time: 99 min 59 s (100 min).
If you need detail information, please send your inquiry to my e-mail:pzsy12@foxmail.com Widely applied for the junction of over-head, embedded and pipe-packed communication cable, under the environmental temperature ranged from -30¡æ~60¡æ. Adopt multi-layer structure with strong mechanical strength, good resistance to crack, strong heat-shrinkable force and weather ability. The white line inside of the track and thermo sensitive coating on the surface of the product can ensure correct operation. Multi-layer materials pressed aluminum foil sheet can ensure reliable water-resistance and moisture-resistance. RSBJ SPECIFICATIONS Unit:mm Specification The maximal outer diameter allowed for joint wire The minimal outer diameter allowed for cable The cable open distance in interface The applicable cable pairs The wire diameter 0.4 The wire diameter 0.5 43¡Á8-200 43 8 200 30 25 43¡Á8-500 43 8 500 50~100 20~50 75¡Á15-500 75 15 500 100~300 50~200 92¡Á25-500 92 25 500 300~800 200~500 122¡Á30-500 122 30 500 800~1400 600~1200 160¡Á42-500 160 42 500 1400~2400 1200~1800 200¡Á50-500 200 50 500 2100~2700 1800~2400 In sets.
