Hazelnut : Application of hazelnut - 1, in the field of food, hazelnut can be made of single food can also be made of sticky chocolate, candy, pastry and other processed foods. 2, hazelnut oil is about 54% of soybeans 2 to 3 times, is squeezed edible oil and a variety of industrial oil raw materials, oil can be used as feed or fertilizer. 3, stick can also be medicine. Hazelnut is rich in unsaturated fatty acids, with lower cholesterol, effectively prevent the occurrence of cardiovascular and cerebrovascular disease; hazelnut in the vitamin E content of up to 36%, with anti-aging, cure blood vessels hardening, moisturizing the skin , The stick contains anti-cancer chemical ingredients paclitaxel, can treat ovarian cancer and breast cancer and some other cancer, can extend the patient's life; stick in the magnesium, calcium and potassium and other trace elements in the high content of long-term food help To adjust blood pressure. 4, hazelnut shell is the production of shells activated carbon raw materials. Hazelnut can be sericulture.
Chestnut : Chestnut produces higher energy, is a nut type, contains the starch is very high. According to the investigation of dry chestnut carbohydrates reached 77%, fresh chestnuts have 40%, is the potato 2.4 times; chestnut which is 4% to 5% protein content, although not as peanut, walnut, but also than cooked The rice is taller. Fresh chestnuts contain vitamin C than the recognized vitamin C rich tomatoes to more, it is more than ten times the apple! Chestnut contains a wide range of minerals, potassium, magnesium, iron, zinc, manganese and other content than apples, pears and other common fruit is much higher, especially potassium-containing, than the so-called potassium-rich apple is also 4 times higher The chestnut not only contains a lot of starch, but also rich in protein, fat, B vitamins and other nutrients, heat is also high, chestnut vitamin B1.B2 rich in content, vitamin B2 content of at least 4 times the rice 100 grams also contains 24 mg of vitamin C, which is food can not match. Every 100 grams of protein containing 5.7 grams, 2 grams of fat, carbohydrates 40 to 45 grams, 25 grams of starch. Health chestnut vitamin content can be as high as 40 to 60 mg, cooked chestnut vitamin content of about 25 mg. Chestnut also contains calcium, phosphorus, iron, potassium and other inorganic salts and carotene, B vitamins and other ingredients.
Furnace oil, fuel oil,, base oil (virgin & recycle), used engine oil, light diesel oil, crude oil,, burner oil, light cycle oil, aromatics, xylene, toluene, naphtha, methanol, kerosene, gas oil, white spirit..
Lithium chloride (chemical formula: LiCl) is an alkali metal halide, a white, deliquable solid at room temperature. Due to the smaller ionic radius and higher hydration energy of lithium, the solubility of lithium chloride is much greater than that of other chlorides (83g/100mL, 20�°C). Its aqueous solution is alkaline. Lithium chloride is a sodium chloride type structure, in which the chemical bond is not a typical ionic bond, so it can be dissolved in many organic solvents, and ethanol, amines can form different admixtures. This property can be used to separate lithium chloride from alkali metal chlorides.
A durable and long-lasting material that can be used in a variety of applications, either rigid or flexible, building and construction, medical devices and food packaging. a free flowing vinyl chloride homo polymer resin having low molecular weight It is manufactured by suspension polymerization. we supply a wide range from POLYVINYL CHLORIDE (PVC) as per customer Specifications from Reputable Suppliers in GCC countries.
Organic chemical, inorganic chemical, wastewater treatment, solvents, gases, industrial chemicals, ferric chloride, hydrochloric acid, aluminium sulphate, ferrous sulphate, trisodium phosphate.
Product Name:Magnesium Ingot Product packaging: Magnesium or wooden pallets, strapped with steel straps, and covered with plastic film. Specific packaging differs from customer requirements or contractual requirements. Conventional products generally weigh per pallet: about 1-1.25 tons. Product application: Mainly used in four major fields of magnesium alloy production, aluminum alloy production, steelmaking desulfurization, and aviation. In addition, it is also used in rare earth alloys, metal reduction, chemical industry and instrument manufacturing.
Chemical Name: Fluorspar Other Name: calcium fluoride, fluorspar, CaF2, fluorspar powder, fluorite, Chemical Formula: CaF2 CAS No: 7789-75-5 Molecular: 78.08 EINECS No.: 232-188-7 H.S.Code: 2826199090 Chemical Properties 1) Crude ore- 25 to 30% 2) Metallurgical grade- 75 to 82% 3) Ceramic grade- 94 to 96% 4) Acid grade- 97% 5) Crystalline grade- 99% Physical Properties Various granulations available from lump to superfine powder (45 microns) Typical Applications Three main commercial grades of fluorspar are distinguished: metallurgical grade (75-82% CaF2), ceramic grade (94-96% CaF2) and acid grade (97% CaF2). Metallurgical grade fluorspar (metspar) representing almost one third of world production volume is used in the manufacturing of aluminium and stainless steel, in extraction of metals such as niobium and tantalum, in metal processing to remove unwanted impurities and in various other applications.
When magnesite is calcined at 800-1200â??, it is called "light burning", and its product is called light burning magnesium powder, which is called light burning powder for short. Light-burned powder is mainly used to make cementitious materials, heat-insulating and sound-insulating building materials and ceramic raw materials, and it is also an ideal raw material for producing high-density magnesia. After chemical treatment, light-burned magnesium can be made into a variety of magnesium salts, which are used in magnesium sulfate, light magnesium oxide, inorganic glass fiber reinforced plastic, magnesium hydroxide, fire-proof board, magnesia-alumina spinel, light-weight wallboard, greenhouse bracket, ventilation pipeline, fire-resistant cable, magnesite manhole cover, mold, trailer, and so on.
High purity Magnesia is selected from natural super grade magnesite and purified by flotation ,then made by light burning, fine grinding, pressure ball, calcined in ultra-high temperature oil shaft kiln. It is a high quality raw material for brick making and amorphous refractories.
Fused magnesia is prepared by melting selected grade A natural magnesite or high-purity lightly burned magnesium particles in an electric arc furnace. The product has high purity, large crystal grains, compact structure, strong slag resistance and good thermal shock stability. It is an excellent high-temperature electrical insulation material and an important raw material for making high-grade magnesia bricks, magnesia-carbon bricks and unshaped refractories.
Dead burnt Magnesia Re-burned magnesia is made of natural magnesite and calcined in high temperature shaft kiln. It is the raw material for making bricks and producing unshaped refractories, and the finished products are used for steel making, electric furnace bottom and ramming furnace lining.
ILMENITE Packing: * Bulk shipment: in Bulk for large quantity. * Container loading: 50/bag ,ton/bag or customized Application: to be used for produce high slag titanium and titanium oxide.
The Introduction of Calcined Petroleum Coke Calcined Petroleum coke is a by-product of delayed coking unit when the raw oil is cracked at high temperature to produce light oil.The output of petroleum coke is about 25-30% of the raw oil. Its low calorific value is about 1.5-2 times that of coal, ash content is not more than 0.5%, volatile content is about 11%, and its quality is close to anthracite The Application: 1. Low-sulfur, high-quality cooked coke such as needle coke is mainly used to manufacture ultra-high power graphite electrodes and certain special carbon products; needle coke is an important material for the development of new electric furnace steel making technology in the steel making industry. 2. Medium-sulfur, ordinary cooked coke, used in aluminum smelting in large quantities. 3.High-sulfur, ordinary green coke is used in chemical production, such as the manufacture of calcium carbide, silicon carbide, etc., and also as a fuel for metal casting, etc. CAS NO.:64743-05-1 package:Ton package
Flake caustic soda, with chemical name of sodium hydroxide, is a white translucent flaky solid, which is a basic chemical raw material. It is widely used in textile industries such as paper making, synthetic detergent, soap, viscose fiber, rayon and cotton fabrics, pesticides, dyes, rubber and chemical industries, petroleum drilling, petroleum industry for refining petroleum grease and tar, and national defense industry, machinery industry, wood processing, metallurgical industry, pharmaceutical industry and urban construction. It is also used for manufacturing chemicals, paper, soap and detergent, rayon and cellophane, processing bauxite to produce alumina, and also for mercerizing textiles and water treatmentï¼?etc. Caustic Soda Solid Other name :ã??sodium hydroxide CAS No: 1310-73-2 UN No.: 1823 IMO Glass: 8 Formula: Na OH Apperance: white in solid Package: 200kg/drums Application:Widely used in metallurgy, petroleum, chemical industry, textile, paper making, printing and dyeing, soap industry, pharmaceutical and food industries,etc.
Introduction Potassium hydroxide (chemical formula: KOH, formula: 56.1) white powder or flaky solid. The melting point is 380 C, the boiling point is 1324 C, the relative density is 2.04g / cm3, the refractive index is n20 / D1.421, and the vapor pressure is 1mmHg (719 C). Its properties are similar to caustic soda,it is strongly alkaline and corrosive.The pH of a 0.1mol / L solution is 13.5. It easily absorbs moisture in the air and deliquesces, and absorbs carbon dioxide into potassium carbonate. It is soluble in about 0.6 parts of hot water, 0.9 parts of cold water, 3 parts of ethanol, 2.5 parts of glycerin, and slightly soluble in ether. A large amount of heat is generated when dissolved in water, alcohol or treated with acid. Moderately toxic, half lethal dose (rat, oral) 1230mg / kg Basic Information Product  Name:  Potassium  Hydroxide KOH CAS:1310-58-3 EINECS:215-181-3 MW:56.11 Appearance: White  flake Hazard Class:8 UN:1813
The sodium bentonite produced by our company is modified by artificial wet sodium.The montmorillonite in the natural bentonite is fully ion exchanged, thereby improving the physical and chemical properties of the bentonite. Therefore, refined sodium bentonite has higher application value and economic value. Application: 1. Because this product has stable suspension and thickening properties, it can be used as an anti-sedimentation and thickening additive for water-based coatings. 2. It can be used as molding sand and drilling mud in mechanical casting 3. Textile printing and dyeing, filling, bleaching,anti static coating, sizing instead of starch, etc.
Introduction The formula of the raw materials of the tofu cat litter is mainly grains such as bean curd residue, pea fiber, corn starch, etc. The raw materials are food grade, rich in protein and carbohydrates, and free of oil. In the production process, the core is the granulator. After a series of special treatment processes, after drying, fermentation and packaging, the tofu cat litter is finally made. advantage 1. The materials are environmentally friendly Tofu cat litter is mainly made of natural tofu residue, which is environmentally friendly and has no harm to eating by mistake. 2. Instantaneous agglomeration Fast water absorption, fast agglomeration, not easy to disperse, not touching the bottom, and more economical dosage. 3. Deodorization and sterilization Clean and deodorize, inhibit bacterial growth, and keep the air in the room fresh and odorless. 4, easy to handle Low dust, light weight, rapid dissolution, no residue, direct flushing toilet, convenient type 1. Tofu cat litter. 2.Mix cat litter. The mixed cat litter products mainly use high-quality bentonite cat litter, millet litter, crushed sand, activated carbon sand, etc., and are mixed according to the ratio of 5: 56: 47: 3. taste Original flavor, milky fragrance, green tea, peaches, lemons, activated carbn etc. CAS No.9063-38-1 package:25 kg woven bag
Introduction Potassium chloride is a white crystal, extremely salty, odorless and non-toxic. Soluble in water, ether, glycerol and alkali, slightly soluble in ethanol, But it is insoluble in anhydrous ethanol, has the properties of moisture absorption and easy caking.solubility in water increases rapidly with increasing temperature, and is often associated with sodium salts It acts as a metathesis and generates new potassium salts. Mainly used in inorganic industry, it is the basic raw material for making various potassium salts or bases such as potassium hydroxide, potassium sulfate, potassium nitrate, potassium chlorate and potassium dichromate. The pharmaceutical industry is used as a diuretic and a drug for the prevention and treatment of potassium deficiency. The dye industry is used to produce G salts, reactive dyes, etc. In agriculture, it is a potash fertilizer. Its fast fertilizer effect, directly applied to farmland, can increase the moisture in the lower layer of the soil, and has the effect of resisting drought. However, it is not suitable to be applied to saline, alkaline land and crops such as tobacco, sweet potato and sugar beet. Potassium chloride tastes similar to sodium chloride (bitter), and is also used as an additive for low sodium salts or mineral water. In addition, it is also used to make muzzle or muzzle flame retardants, steel heat treatment agents, and for photography. It can also be used in medicine, scientific applications, food processing, and sodium chloride can also be replaced by a portion of potassium chloride in the salt to reduce the possibility of hypertension. Tons of packages Basic Information Chinese name: potassium chloride other names for Chinese: slow-release potassium; Bu da xiu English name: Potassium chloride Other names for English: Sylvite; Muriate of potash; Potassium Chloride; Kaochlor; Kalcorid; Kalibats CAS number: 7447-40-7 M.F.: K Cl Molecular weight: 74.55130 Exact mass: 73.93260
Introduction: Artificial Rutile is also called Synthetic Rutile. Its TiO2 content varies from 91% to 96% depending on the processing technology. It is a high-quality substitute for natural rutile. Application: Synthetic Rutile can be used to make high-quality welding electrodes; titanium dioxide can be used to make high-grade white paints, coatings, lightening agents for rayon, white rubber and fillers for high-grade paper. Titanium, titanium metal, enamel products and electrode coatings can also be used to produce artificial rutile yellow pigments.