Briquettes produced from briquetting of biomass are fairly good substitute for coal, lignite, firewood and offer numerous advantages. -briquettes are cheaper than coal, oil, lpg -there is no sulfur in briquettes. -bio mass briquettes have a higher practical thermal value and much lower ash content(2-10% compare to 20-40% in coal). -there is no fly ash in burning briquettes Briquettes have a consistent quality, have high burning efficiency are ideally sized for complete combustion. Combustion is more uniform compared to coal and boiler response to changes in steam requirements is faster due to higher quantity of volatile matter in briquettes. -briquettes are clean to handle and can be packed in bags for ease of handling and storage. -briquettes are usually produced near the consumption centers and supplies don´t depend on erratic transport from long distances. Hdpe bags
The machine is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. it can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.
High pressure suspension grinder is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. It can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundum, heat insulating material, etc.
Activated carbon Activated carbon is a crude form of graphite and is commonly made from wood, coal, lignite and coconut shell. Activated carbon consists of a vast system of pores. These pores range in size from visible cracks and crevices to microscopic dimension. This structure gives the carbon its very large surface area, which allows the carbon to adsorb such a wide range of components. Activated carbon has the strongest physical adsorption forces and the highest volume of adsorbing porosity of any substance known to mankind. Applications: Air purifier, mask, odor removal, removal harmful gas, gas separation, water treatment, medical applications, electronics etc. Activated carbon nowoven materails Type·ª Pp-activated carbon Polyester-activated carbon Rayon-activated carbon Nylon-activated carbon
The largest production capacity of this organic fertilizer granulator can reach to 6-8 tons per hour, which completely satisfies high capacity requirement of fertilizer manufacturers/investors. This fertilizer granulator can be used for a variety of raw materials. a.It can be applied in Bio Organic Fertilizer Production Line. Raw materials: peat, lignite, organic municipal sludge, and straw. b.It can be applied in Cake Fertilizer Production Line. Main raw material is soybean cake. c.It can be applied in Organic Compound Fertilizer Production Line. Raw materials is chicken manure, pig manure, cow dung, and other livestock/poultry waste. d.It can be applied in Complete Feed, Mixed Feed Production Line. Raw materials are maize, legume, and grass powder. e.It can be applied in Biological Feed Production Line. Raw material is crop stalks. If you are interested in it, please feel free to contact us any time. You can also send us inquiry, we will contact you within 24 hours.
Coal is world’s most abundant fossil fuel formed from the decomposition of organic materials, plants, vegetation that accumulated in swamps to great depths. With burial, the plant material was subjected to high temperatures and pressures over millions of years. This caused physical and chemical changes in the vegetation, transforming it into peat and then into coal. While being transformed from organic matter (peat) into coal, it underwent various stages like formation of lignite or ‘brown coal ‘, which is the lowest quality of coal, to sub bituminous to bituminous and then anthracite, which is the highest quality and hardest coal. High-rank coals are high in carbon and therefore heat value, but low in hydrogen and oxygen. Low-rank coals are low in carbon but high in hydrogen and oxygen content. In addition to carbon, coals contain hydrogen, oxygen, nitrogen and varying amounts of sulphur. Use of Coal Coal has many important uses worldwide. The most significant uses are in electricity generation. Not only does coal provide electricity, it is also an essential fuel for steel and cement production. Other important users of coal include paper manufacturers, chemical and pharmaceutical industries.
Polyurethane Flip-Flop Screen Mesh Polyurethane Flip-Flop Screen Mesh have been in operation for decades for screening of moist or humid materials. Made from highly resilient polyurethane elastomer, these filp flow mats withstand deformation without loss of elasticity or dimensional accuracy. They are designed both for bolting and clamping systems, so to fit all screen decks worldwide with no distinction depending on machine brand, deck dimensions and installation characteristics. Panel size: Length & Width & Thickness are custom designed Aperture size: 2~32mm Aperture shape: Square, Rectangle, Slot, Circular Polyurethane Flip Flop Screen Mats offered make use of quality elastomers that guarantees highest performance support as demanded by the customers. Being used for applications involving screening moist or humid materials, these are also suitable for screening of products material like wood chips, building rubble, plastic and others and can also be custom developed as specified by the customers. These are suitable for screening of moist or humid materials like Iron ore at 6mm with 15% moisture, Raw sand at 3mm with 6% moisture, Compost at 10mm with 50% moisture, Slag at 3mm with 10% moisture and others. Usage Applications: Iron ore at 6mm with 15% moisture Raw sand at 3mm with 6% moisture Compost at 10mm with 50% moisture Slag at 3mm with 10% moisture Salt at 3 mm with 5 % moisture Coke at 3mm with 20% moisture Lignite at 6mm with 50% moisture Coal at 6mm with 18% moisture Limestone at 3mm with 20% moisture Pet coke at 3mm with 18% moisture Plus other hard to screen materials like Wood Chips, Bamboo Chips, Washery Waste, Building Rubble, Soil, Plastic, Auto Parts etc.
Polyurethane Flip-Flop Screen Mesh Polyurethane Flip-Flop Screen Mesh have been in operation for decades for screening of moist or humid materials. Made from highly resilient polyurethane elastomer, these filp flow mats withstand deformation without loss of elasticity or dimensional accuracy. They are designed both for bolting and clamping systems, so to fit all screen decks worldwide with no distinction depending on machine brand, deck dimensions and installation characteristics. Panel size: Length & Width & Thickness are custom designed Aperture size: 2~32mm Aperture shape: Square, Rectangle, Slot, Circular Polyurethane Flip Flop Screen Mats offered make use of quality elastomers that guarantees highest performance support as demanded by the customers. Being used for applications involving screening moist or humid materials, these are also suitable for screening of products material like wood chips, building rubble, plastic and others and can also be custom developed as specified by the customers. These are suitable for screening of moist or humid materials like Iron ore at 6mm with 15% moisture, Raw sand at 3mm with 6% moisture, Compost at 10mm with 50% moisture, Slag at 3mm with 10% moisture and others. Usage Applications: Iron ore at 6mm with 15% moisture Raw sand at 3mm with 6% moisture Compost at 10mm with 50% moisture Slag at 3mm with 10% moisture Salt at 3 mm with 5 % moisture Coke at 3mm with 20% moisture Lignite at 6mm with 50% moisture Coal at 6mm with 18% moisture Limestone at 3mm with 20% moisture Pet coke at 3mm with 18% moisture Plus other hard to screen materials like Wood Chips, Bamboo Chips, Washery Waste, Building Rubble, Soil, Plastic, Auto Parts etc.
Cement Shaft Kiln is used for calcination in cement plant. We offer 50 TPD to 300 TPD vertical shaft kiln on turnkey basis for Cement Plant. Cement Shaft Kiln is modern day answer for cost effective production and a boon for the developing countries. VSK is the advanced technology available worldwide for small & medium entrepreneur. We (ZK Corp) fabricate vertical shaft kiln, rotary kiln, raw meal mill, ball mill, O-sepa and all other related equipment for the construction of small size & medium size cement plants. Structure: The raw material to be calcined is charged at the top of the kiln. It it then pre-heated by the combustion gases in the counter-current before reaching the burning zone. In the burning zone the material is calcined by means of fuel introduced together with primary combustion air through radially arranged burner lances. Cooling air is introduced at the discharge part of the kiln to cool the product in a counter-current manner. The heated cooling air travels upwards to the burning zone and is used again there as the secondary combustion air. From the top of the kiln he exhaust gas are directed to a dust collecting system. OUR ADVANTAGE 1. Different plant sizes available (50TPD,100TPD,200TPD,300TD, 500TPD,1000TPD,2000TPD,3000TPD). 2. Use of alternative fuels like low volatile coal, petroleum coke, lignite etc. 3. Use of alternate raw materials like bauxite, laterite, iron ore, Lime, Sea Shells etc. 4. Better Kiln design to prevent radiation loss.
The high-pressure suspension grinding mill is a kind of grinder , mill, grinding machine, industrial mill, milling machine, mining machine which is used to grind non-inflammable and non-explosive stuff whose mohs hardness is below 9.3 such as barite, limestone, kaolin, ceramics, and slag, etc. Such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc. Features of the high pressure grinding mill 1. Compared with the common Raymond grinding mill under the same power conditions, the capacity can be increased by 10%, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 1500kgf. 2. All the mineral materials with mohs hardness below 9.3 can be crushed. 3. The final product size ranges from the maximum particle diameter of 0.95mm (20mesh) to the finest diameter of 0.038mm (400 mesh). A few materials can reach 0.013mm (1000 mesh). 4. Its dust-removing effect fully meets the national dust discharge standard. 5. The classifier is easy for adjustment. 6. The grinding device adopts a superposition multi-grade sealing with good sealing performance Standard
Organic soil conditioner High power organic soil conditioner (hi-po) High power organic soil conditioner (hi-po) is and organic product derived from fully matured compost plant waste material that blended with oxidized lignite stabilizer and clipnotilolite. It has high cec value. This product developed locally material sources with research & development co-operate by mardi. Hi-po substances produced by the decay of organic matter. (hi-po) can be subdivided into five major fractions: humins, humic acid, fulvic acid, fiber and ion catalytic. Collectively they function as follows: 1. To provide physical modification of soil structure and texture. Thus improving aeration and moisture holding capacity. 2. It can hold minerals and macro nutrient in available and soluble forms which plant assimilate and use. 3. To provide direct plant stimulation by supplying of regulating hormone levels to stress plants. 4. It can serve as substrate supporting the growth of beneficial soil micro-organism. 5. It can improve % of cec value Benefits of hi-po Physical benefits Increased water holding capacity of soil Increased aeration of soil Improved seed bed Improved soil workability Reduced soil erosion Improved drought tolerance Chemical benefits Increased % of total nitrogen in soil Acidic and alkaline soils neutralized Maximized ion exchange capacity Maximized minerals uptake Fertilizers retained and released in root zones as needed Reduced heavy metals contain in soil Biological benefits Accelerated cell division thus stimulating plant growth Increased cell wall thickness thus extending shelf life Accelerated seed germination Increase of desirable micro-organism in soil Increase vitamin content in plant Maximized nutrient uptake Increase lengthwise root growth Increase plant enzyme production Enhanced photosynthesis Interested, please contact us. 25kg per bag
High-pressure suspension grinder High-pressure suspension grinder is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. It can produce powder from various non-flammable and non-explosive mineral materials with mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc. Specification Nameunitspecification Quantity of grinding rollerspiece5 Grinding roller, diameter x heightmm410x210 Grinding ring, diameter x heightmm1280x210 Rotation speed of the main framerpm103 Max. Feeding sizemm30 Product finenessmm0.95~0.044 (the finest is up to 0.038) Capacityton/hour5~8 Overall dimension: lxwxhm7850x8000x9700 or 9200x7250x9700 Total weightton26.1 Basic unitsunitespecifications and technical parameters Motor of main unitmodely280s-4 Powerkw75 Rotatingrpm1480 Motor of classifiermodelyct200-4b Powerkw7.5 Rotatingrpm125~1250 Motor of elevatormodely100l2-4 Powerkw3 Rotatingrpm1430 Motor of blowermodely250m-4 Powerkw55 Rotatingrpm1480 Motor of jaw crushermodelpe250x400 Y180l-6 Powerkw115 Rotatingrpm970 Electromagnetic vibration feedermodegz2f Powerwatt150
Chance of a lifetime: We help clients finance, customise and commission low heating consumption heavy-duty Rotary Dryers and energy-saving furnaces to mill, grind, granulate, calcine,coat, de-volume and de-toxin your humid materials into marketables for billions. About company: China ZJN environment protection technology company manufactures compact, low-consumption, heavy-duty, industry-specific dryers widely used to dry,calcine,mill, grind, granulate, coat, de-volume and de-toxin wood chips(for bio-fuel), sawdust, sand, fertilizer, chemicals, kitchen leftovers, paper making pulp, animal feed, sludge in electroplating, leather, textile,printing and dyeing, coal mining and pharmaceutics,brewing, starch processing, biological fermentation, sewage, and hazardous metals, sweet potato residue, vinasse, bean dregs, medicine dregs, coal slime, lignite and others. At present, rotary dryers manufactured by China ZJN are running in many textile printing and dyeing companies in South America, Southeast Asia, and 10+ others in China. Advantages: (1). High production capacity (2). Lower heat consumption and operation cost (3) . Capable to dry different kinds of product (4) . Stable operation (5) . Uniform dried product (6). Both dryer and calciner, operation Temp. Up to 1000°C (7 ). Heat source can be steam, electricity, coal, natural gas etc. drying technologies and new processes ensure good temperature control and ratain useful properties of raw material; full contact of heat and material downs heating resources 60%; compact Payment Type: T/T, L/C, Western Union, Cash Leads:10-30 days after payment Port:Qingdao, Shanghai, Shenzhen Color: green or red Quality&Aftersales: 1. More than 30 years' experience. 2. We are the leading professional supplier of drying equipments and service for drying equipment industry. 3. All products achieved ISO9001:2008 quality management certificate and EU CE certificate. Our state-of-the-art design and strict quality control ensure reliable product quality. Highly-trained personnel for all-round aftersales service.Three Guarantees policy for all our products. China ZJNgenuine energy-saving and environment friendly! Welcome to our company for drying equipmenta big brand&high reputation, the company is looking forward to your consultation and cooperation in business! The separator and rotary dryer will separate the toxin from your mining materials, sludge and dewater the material&sludge, turning them into marketable materials and release them into your product containers.
Coconut Shell Activated Carbon Welcoming you to aroyal incredible exports-ariexports, your perfect destination to get high quality activated carbon manufactured using coconut shell based charcoal. Enjoying a good reputation as one of the leading exporter of Steam activated carbon in South India, providing quality products to our clients across the globe.Activated Carbon exported from our end are been tested with quality standards ensuring value for our products. With and prompt delivery time we assure faster delivery of your valuable orders. As Activated carbon is a non-graphite form of carbon which could be produced from any carbonaceous material such as coal, lignite, wood, paddy husk, coir pith, coconut shell, etc. Activated carbon manufactured from coconut shell is considered superior to those obtained from other sources mainly because of small macropores structure which renders it more effective for the adsorption of gas/vapour and for the removal of colour and odour of compounds. The activated carbon is extensively used in the refining and bleaching of vegetable oils and chemical solutions, water purification, recovery of solvents and other vapours, recovery of gold, in gas masks for protection against toxic gases, in filters for providing adequate protection against war gases/nuclear fall outs, etc. Steam activation and chemical activation are the two commonly used processes for the manufacture of activated carbon. However coconut shell based activated carbon units are adopting the steam activation process to produce good quality activated carbon. Packing & Shipment Terms Packing: : As per customer requirement and specifications. Pre-shipment Inspection : SGS (or) any other agency as per your requirement for Weight and Quality. Quantity : 20 feet Container / 40 feet Container. Port of Loading : Chennai , Mumbai, Khandla or Mundra, kerla India. Port of Discharge : To Any Port as per customer requirement Shipment Terms : FOB according to Inco Terms 2010 and as per customer requirement. Payment Term : 30% Advance by TT, 70% by Irrevocable L/C Delivery to Port of Loading : 15-20 days from the date of receipt of Confirmed Purchase Order and Payment Instrument (L/C documents and Advance payment)
Simple introduction of briquette making machine Zhongzhou series Briquette machine,mainly used to suppress difficult molding powder materials , characterized by forming pressure, the host rpm adjustable , with a spiral Feeding Device. Briquette Pressing Machine can be used to suppress coal , iron , coke , aluminum powder, iron , iron oxide skin, toner , toner , slag , gypsum, tailings , sludge , kaolin , activated carbon, coke powder and other end , Powder , waste, waste residues, are widely used in refractory , power plants , metallurgy , chemical , energy , transportation, heating , etc. , produced by the compression molding machine after the briquette materials , energy saving , easy to transport , increase of wastes Utilization, with good economic and social benefits coal Briquetting Machine is used to produce the green energy briquette with pillow or cubic shape which is suitable for transporting and also saving energy. Suitable materials for briquetting: 1. Color and black metallic mine powder 2. Coal powder, Coke powder, Lignite, etc, 3. Charcoal powder, fireproof materials, Desulfurization gypsum, Dolomite, etc. Request for raw materials 1. In order to ensure the good quality and mechanical strength of the final product, special care should be taken to ensure that the granule size fed to the machine is maintained below 3mm, preferable in the range of 30-40% small than 1-2 mm, with no more than 10% over 2mm. 2. The moisture content of the mixture has also a critical effect on the quality of the final product, so it should be kept in the range of 8-20%. Description of output The output briquette is in high quality and strong (not easy broken) that won't be broken when dropped from 150-150cm height. Meanwhile, it is easy for combustion, no smell and last longer when burning. Technique parameter The production scale can be 2TPH to 30TPH, we offer bith single briquette machine and complete manufacturing turnkey plant with engineering. For more models and information, pls contact us as soon as possible. Operating Principle The type of briquette machine have two larger rollers in a fixed position in the frame and the other two smaller rollers are moveable. Four Roller Double Pressing Briquette Press can supply higher pressure and higher density during production of briquettes, so the briquettes are stronger and in higher density, also the surface is smoother iron case or as your request
T130X Superfine Grinding Mill is mainly used in processing powder of mineral materials of metallurgy, building materials, chemical industry, mining, etc. It can grind non-flammable and non-explosive materials with moisture less than 6% such as Feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, slag, activated carbon, dolomite, granite, iron oxide yellow, bean cake, chemical fertilizer, compound fertilizer, fly ash, bituminous coal, coke, lignite, Ling U.S. sand, gold, red mud, clay, Kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, muddy green rock, leaf wax rock, shale, purple rock, Diego rock, basalt, gypsum, graphite, insulation material, etc. Equipments: The complete set of T130X grinding mill consists of mainframe, reducer, classifier, maintenance platform, blower, collector, electric controller, etc.And some auxiliary equipments such as jaw crusher, bucket elevator, electromagnetic vibration feeder and hopper, etc. Working Principal: Large materials are crushed by jaw crusher into required size for mainframe, then the crushed materials are elevated to the hopper by bucket elevator£¬then to the grinding chamber for grinding by vibrating feeder evenly and continuously. The powder goes upwards with the airflow, after separating by the classifier, those which can meet the fineness requirement enters into the collector through pipes for separating and collecting, and discharged from the discharged valve as finished products. The airflow is sucked into blower through wind recycling pipe at the upper part of cyclone power collector. And the closed airflow circulation system with negative pressure ensures the environmental health of production line site. Technical Date: 1) Mainframe parameters Item Unit Specifications &Technical data Quantity of roller pcs 4 Diameter of roller x Height mm 410x210 Diameter of ring x Height mm 1300x210 Rotation speed rmp 103 Max. feeding size mm
Feldspar powder, lignite powder, talc powder, dolomite powder, limestone powder, clay powder, fire clay powder, terracotta clay powder.
Spices like cumin powder, aluminium & metal scrap, industrial fuel such as steam coal, wood pellets, pet coke, lignite, furnace oil.Trade
Place of Origin: Egypt SiO2: 47-50% Dimensions: Lumps or Powder Application: Ceramic, Rubber, Paper, Paints, Porce-lain, Tableware, Sanitary ware Supply ability: 50,000 MT/ month Shipping terms: FOB-CIF Loading Port: Hamrawein Port, Egypt
Place of Origin: Egypt K2O: 12.5% Application: Ceramic, Glass, Porcelain, Fillers, Paint, Mild Abrasives, Welding Electrodes (Produc-tion of Steel), Latex Foam, The Welding of Rod Coating. Supply ability: 50,000 MT/ month Shipping terms: FOB-CIF Loading port: Hamrawein port, Egypt