High Alumina Refractory Cement is manufactured from Calcined Alumina and high purity lime. It is used as a binder for all types of castable refractories. Ashapura offers two ranges; HARB 50 and HARB 70 with minimum alumina content of 50% and 70% respectively.
High Alumina Calcined Bauxite For Refractory.
Calcined alumina, alumina powder, alumina hydroxide, stpp, sodium tripoly phosphate, zirconum silicate, luster powder.
Feldspar, quartz, kaolin, wollastonite, calcined talc, zirconium silicate, zircon replacement, ball clay, zinc oxide, calcined zinc oxide, pyrophyliite.
Al2O3 45%min Fe2O3 0.6%max TIO2 1%max K2O+NA2O 0.25%max CAO+MGO 0.3%max Bulk density 2.45G/CM3 min Source Inner Mongolia
Al2O3 47%min Fe2O3 1%max TIO2 1.6%max K2O+NA2O 0.5%max Bulk density 2.50G/CM3 min Mullite phase 65 typical
Since 2010 we are engaged in trading & exports of ceramic products, very high Quality of Zirconium Silicates & Zirconium Flours for ceramics. We mostly supply Zirconium 2, Zirconium 5 and Zirconium Flour 325 mesh to ceramic industries. Application Of Zirconium Silicates : Opacifier for pottery and porcelain glazes ,wall tiles, roofing tiles, sanitary ware etc Frits, Glazes & Enamels. Admixture for ceramic body. (Improvement of property and Opacification of color) Typical Chemical Properties Composition - Zirconium Silicate (ZrSiO4) Zirconia + Hafnia (ZrO2 + HfO2) : 65.00% Min. Silica (SiO2) : 35.00% Max. Alumina (Al2O3) : 00.70% Max. Titania (TiO2) : 00.20% Max. Ferric Oxide ( Fe2O3) : 00.10% Max.
Calcined petroleum coke: Description: Calcined petroleum coke is made from Ningxia Baiyun anthracite. F.C is between 90%-95%. Reduce the cost of steelmaking effectively by replacing the traditional petroleum coal of carburant. Also can improve the Carbon content in steel-making and Ductile iron foundry. Application: Calcined petroleum coke has two main uses, namely as the fuel and additive Used in steel mill ladles, melting, holding and blast furnaces as recarburizer Used as substitute of Calcined Petroleum Coke in particular application
Description: calcined anthracite coal is made from Ningxia Baiyun anthracite. F.C is between 90%-95%. Reduce the cost of steelmaking effectively by replacing the traditional petroleum coal of carburant. Also can improve the Carbon content in steel-making and Ductile iron foundry. Application: Carbon raiser has two main uses, namely as the fuel and additive Used in steel mill ladles, melting, holding and blast furnaces as recarburizer Used as a substitute of Calcined Petroleum Coke in a particular application
Ashapura is India's largest producer of Advanced Refractory Materials with a versatile portfolio of Castables, High Alumina Cement, Calcined Bauxite and Fused Aluminas. High-temperature Calcined Aluminous Clays (Chamotte & Mullite) are used to produce Alumina Refractories for steel, cement and metal industries. Besides having a dominant position in the Indian market, Ashapura is a preferred supplier of refractory raw materials & products in Europe, Middle East and South East Asia. Standing India's largest producer of refactory. Applications Abrasives Refactories Foundries Grinding Road Surfacing
High alumina bauxite & calcined bauxite.
The catalyst alumina ball is made of alumina ultrafine powder, advanced molding technology and high-temperature tunnel kiln sintering. The catalyst alumina ball has the characteristics of high strength, high chemical stability, low water absorption and thermal stability. It can withstand high temperature, high pressure, acid, alkali, salt and other corrosion, and can withstand the temperature changes in the production process. The catalyst alumina ball is the key component in the catalytic process of refinery,gas processing and petrochemical industry. As the support and cover material of catalyst in the reactor, its can buffer the impact of liquid and gas entering the reactor on catalyst, support and protect the active catalyst with low strength, and improve the distribution of liquid and gas in the reactor. Its main function is to act as packing material and at the same time to support the catalyst bed in order to prevent breakthrough or loss of catalyst or adsorbent materials downstream of the reactor vessels due to the high pressure and temperature during the operation.
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. White soda feldspar has high sodium content. It is a common raw ingredient used in glass, ceramics, and to some extent in paint, plastics, and rubber as a filler and extender. The alumina from feldspar improves the hardness, durability, and chemical corrosion resistance of glass. Feldspar's alkalis (calcium oxide, potassium oxide, and sodium oxide) operate as a flux in ceramics, reducing the melting temperature of a mixture. We at Aryan Tiles have an enormous selection of both white potash and white soda feldspar minerals. We have a deep understanding of how our Feldspar minerals can be used in manufacturing our customersâ?? end-products and suit their particular industryâ??s needs. And, thus we have been able to supply to various industries and optimize our customersâ?? product manufacturing with our premium quality mineral
Aluminum hydroxide, calcined alumina, activated alumina, alumina catalyst, aluminum sulfate, poly aluminum chloride.Manufacture
Nickel-Alumina(CAS:7440-02-0)
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. The white potash is a distinctive mineral with more potassium content. Our feldspar mineral is of high purity grade, free from impurities and naturally sourced. Our skilled personnel use technology advanced machines to extract the supplied feldspar under their close supervision. This feldspar is utilized in variety of industries, including building, mining, chemical, and others. It is also ideal for making porcelain and earthenware.
Ball clay is majorly used as a basic material in the production of ceramics. They are fine-grained, highly plastic clays that are mostly used to make ceramic and sanitary ware. They are favored for their fluidity, unfired strength, and light color after firing Some specialized ball clays can provide extreme whiteness to the products. They are also employed as soil amendments in horticulture, refractories, polymers, adhesives, and sealants. We majorly source our ball clay mineral from the Bikaner region of Rajasthan. The physical properties of ball clay are high plasticity and unfired strength, refractoriness, along with controlled residue. The ball clay mineral has been an important mineral for the ceramic industry. We also use it in combination with other minerals. This leads to further enhancement of its properties and expands the usage of ball clay in many other industries. For instance, in sanitary ware, our ball clay mineral combined with Kaolin offers a cohesive advantage to the manufacturing. Further, for tableware and crockery manufacturing, we mix our ball clay with kaolin, feldspar and quartz. This gives high enough plasticity and a great white tone to the finished fired product. Ball clays are kaolinitic sedimentary clays that commonly consist of 20â??80% kaolinite, 10â??25% mica, 6â??65% quartz. The plasticity and bonding properties of the ball clay make it the perfect mineral to be used in the making of walls and floor tiles. Ball clay is also used in producing electrical porcelain insulators due to its high insulating properties. In the manufacturing of refractory bricks, we use our ball clay mineral which has high alumina content as binding agents. And, we can also use them as fillers and extenders in several industries such as plastics, rubber, pesticides, fertilizers and adhesives to mention a few. We at Aryan Tiles have an enormous selection of ball clay minerals and with our thorough knowledge of how our ball clay mineral can be used in manufacturing and optimizing our customersâ?? end products. It is our promise to aid our clients with our technical expertise, dedicated customer support and the premium quality ball clay mineral to advance our customersâ?? end products
Carboxymethyl cellulose is the formal name for CMC. It is a naturally occurring mineral that is also known as cellulose gum. We offer high-grade CMC minerals to various industries such as textile, food & beverages, mining, cosmetics, pharmaceuticals and paper. The physical properties of CMC are water solubility, neutral taste and smell, and physiologically inertness among many others. We source and extract CMC from the regions of Odisha, Karnataka, Jharkhand, Andhra Pradesh and Gujarat. There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness. Carboxymethyl cellulose (CMC) or cellulose gum is a cellulose derivative with carboxymethyl groups (-CH2-COOH) bound to some of the hydroxyl groups of the glucopyranose monomers that make up the cellulose backbone. CMC is widely used in a variety of sectors because it has excellent water retention capabilities and film-forming properties, making it an ideal element for industries such as ceramics, textiles, paper surface treatment and mining. Our CMC is carefully and meticulously been developed to optimize mouthfeel and protein stabilization especially in the food and beverage industry along with personal care and pharmaceuticals sectors. It is used in the pelletization process because CMC has strong binding qualities. It also helps reduce fluid loss and provides appropriate rheology in the oilfield and gas industry. Our CMC products are suited for a wide range of applications since they are derivatives of a naturally occurring raw material and have high degree of purity. They are manufactured with cutting-edge technology and are subjected to rigorous quality control methods. There's a broad and expanding list of usage for several industries such as building material additives, printing inks, coatings, pharmaceuticals, food, cosmetics, paper, textiles, etc.
The 99% Al2O3 high alumina ceramic ball are used as catalyst, absorbent, desiccant and drying agent in petroleum, chemical, fertilizer, natural gas and environmental protection industries. As a high alumina ceramic ball catalyst reactor coverage tower packing materials and support, the major role is to increase distribution of gas or liquid, support and protect the intensity of low strength activity catalyst.